Fix with remove problem

Using the Essbase version 6.2 I have tried without luck to do a fix combined with remove.My problem is that I want to remove 2 nodes. If have tried the following.FIX (@remove(@idescendants(D_ABM_MEASURE),"TOTAL COST"));CALC DIM (D_ABM_GL_ACC_DIM, D_ABM_YEARSCEN_DIM, D_ABM_BU_DIM, D_ABM_LEDGER_DIM,D_ABM_RES_DIM, DAC_DEPARTMENT, D_ABM_TIME_DIM);ENDFIXAnd this works, but it only removes one node (Total Cost). To remove a second one I use the list function as a second parameter. Which looks like this:FIX (@remove(@idescendants(D_ABM_MEASURE),@LIST(PERCENT, "TOTAL COST")));CALC DIM (D_ABM_GL_ACC_DIM, /.../D_ABM_TIME_DIM);ENDFIXWhen I run this it doesn't calculate anything.RegardsHenrik.

I think a closed brace is missingtry this FIX (@remove(@idescendants(D_ABM_MEASURE),@LIST(PERCENT, "TOTAL COST")))); CALC DIM (D_ABM_GL_ACC_DIM, /.../ D_ABM_TIME_DIM); ENDFIX

Similar Messages

  • I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

    I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
    I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014.  I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed. 

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

  • I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    Looks like its fixed.     I am syncing it now.      A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well.  My old phone is now an 8 gig ipod.  the books app no longer works and that *****.....but better than nothing...

  • I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?I can not get my Adobe Photoshop Elements 8 organize to open. The ed

    I can not get my Adobe Photoshop Elements 8 organize to open. The edit option comes up with no problem, but will crash when I try to access organize. What should I do to fix this problem?

    Hi,
    Which operating system are you running on?
    Try starting the organizer while holding down the shift key.  Hopefully, it should load the Catalog Manager.
    Select your current catalog and click on the Repair button. Once it has finished, click on the Open button to see if the catalog opens.
    Good luck,
    Brian

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect.   What can I do to fix this?

    I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect.   What can I do to fix this? 

    Try restarting your router as a first thing, this sometimes works for me.

  • Problem with "Remove find my iphone"

    Somone stole my iphone 4s and I used the remote procedure "find my iphone" but the device appeared offline. In any case, if it were connected to the internet I would come back a signal. The problem is that then I accidentally clicked "remove find my iphone" and therefore there aren't any more device, so I think that the thieves could use the device with no problem. There is no way to undo this?
    Ilaria

    ylaryna11 wrote:
    Somone stole my iphone 4s and I used the remote procedure "find my iphone" but the device appeared offline. In any case, if it were connected to the internet I would come back a signal. The problem is that then I accidentally clicked "remove find my iphone" and therefore there aren't any more device, so I think that the thieves could use the device with no problem. There is no way to undo this?
    No, you cannot undo it.

  • Does  Mavericks have the problem fixed with working with the Dell UltraSharp U3014 30 inch monitor?

    Does  Mavericks have the problem fixed with working with the Dell UltraSharp U3014 30 inch monitor?

    I have this (or a similar) issue and I did notice something interesting. After I boot into Windows via Bootcamp (where I have the U3014 specfic driver installed) and then reboot into MacOS X (Mavericks) the monitor works flawlessly.
    I would hazard a guess that this means bootcamp is retaining the driver used in Windows. Kind of the reverse of the TB GBE adapter driver issue.
    To explain my issue for anyone else: the monitor flicks on and off as if the connection was poor. Connecting via HDMI. Connection is fine and as stated, everything works fine in Bootcamp.

  • Problem with remove task from schedule in PWA

    In our environment problem with remove task from schedule by PWA.
    Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
    In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
    disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
    Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
    Problem appeared recently, earlier everything was OK.
    Txn, Dariusz Moczyński

    Hi Darius,
    I'm a bit confused. You are now talking about 2 issues.
    For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
    that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
    For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Do you have a fix for the problem with Avast. Because soon I will just start using IE since Avast has worked fantastic for me. But I would rather not.

    Question
    Do you have a fix for the problem with Avast. Your upgrade process notifies me that it is not compatible with Avast so I always delete it. Soon I will just start using IE since Avast has worked fantastic for me. But I would rather not. Please help.

    Avast needs to update their Web Rep add-on for Firefox 5.0.
    You can look at the new pre-release version of Avast for Firefox 5.
    * http://forum.avast.com/index.php?topic=80362.0

  • I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?

    I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?
    This is the error that is received:
    Cannot open file "C:\Users\Calandra\AppData\Local\Temp\Ask_a_Question__Firefox_Help.pdf". The process cannot access the file because it is being used by another process
    Any information that you can provide will be greatly appreciated.

    Sorry to say that, but the entire system seems ill-designed.
    If I understand correctly, then to add a new Section to a site, you have to subclass SubSection and somewhow integrate that into the system?
    I would be my expectation that you only need to subclass SubSection when you tried to introduce a new type of SubSection.
    The title & all other natural language Strings should never be hardcoded in Java code, but rather taken from some external storage (Database, XML, flat files, ...).

  • I have been watching videos from my ipad via ATV2 with no problems.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it

    Hi, I have been watching videos from my ipad via ATV2 with no problems for over a year.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it waiting 30secs and then plugging it back in.  I have tried restarting, updating and reseting but nothing is working.  It's quite frustrating!!!! Any suggestions????

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • [svn:fx-trunk] 11707: Fix incremental compilation problem with styles.

    Revision: 11707
    Author:   [email protected]
    Date:     2009-11-12 10:52:49 -0800 (Thu, 12 Nov 2009)
    Log Message:
    Fix incremental compilation problem with styles.
    QE notes: None.
    Doc notes: None.
    Bugs: SDK-24173
    Reviewer: Paul
    Tests run: checkintests
    Is noteworthy for integration: No.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24173
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java

    You have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
    <!doctype html>
    Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
    After the above has been fixed, please come back here to fix the remaining problem(s)
    Gramps

  • MMy iPhone 4s is struggling to send messages and dial out.. service is going back and forth between Verizon with a little circle, Roaming, and No Service.. Best fix for this problem..? Thanks

    My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
    Thanks

    My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
    Thanks

Maybe you are looking for