[Fixed]Acer Aspire 7750g driver issue.

Hello everyone,
I own an Acer Aspire 7750g-2636G75Mnkk
Recently i updated to Windows 10 but i found out that my AMD Radeon 6650M is not supported, so i switched back to windows 7 with the Back up disc i made with the factory settings.
So i tried to update everything, i used the AMD auto detect tool and it did install to the newest 15.7 driver. After the restart i got horizontal black lines flickering over my screen so i uninstalled it and went back to the factory driver.
Went to the acer site for driver download and i saw there was a "newer" version available. (8.901.4.0).
So i uninstalled the factory one(8.822.0.0) and installed this one. But the installer said when it was done that there were some problems. I checked the log but everything was succesfully installed.
After the restart everything went good until after the login screen. Screen was black with green, i could barely see anything.
Tried to plug HDMI cable into my TV.
Tv screen is normal but laptop screen is still black and green.
So i uninstalled that one again and went back with the factory one. (8.822.0.0)
I am now running into compatibility issues, i can start a program but it closes right after. I can only start it when i put Windows 7 manually in the compatibility mode.
Even some games say my drivers are outdated.
When i do 64bit DxDiag, it says program stopped working. Started it again and it said it had problems accessing the Direct3D. If i don't skip this step, it stops working. But if i do skip it, it runs but when i check the Screen tab, there is nothing. Not even a driver detected.
I can't even open Catalyst Control Center because it says program stopped working and has been shutdown.
I have updated my BIOS to the latest version Acer gave me V1.21
Oh, and i also downloaded all the updates from Windows Update.
I tried different kind of Catalyst Control Center Suites(mostly the same as the newest driver 15.7, horizontal black lines flickering over the whole screen)
So now im stuck.
Someone got an idea on how to fix this?
Edit: After a long search on how to fix it, i've finally found it.
I have downloaded Display Driver Uninstaller from Guru3d.
Cleaned everything in safe mode and reinstalled the driver.
Everything works perfect now!

Hello, Aspire 7750g (7750 series and 7560 series):55.RB002.001POWER BD Aspire 5750:55.RFD02.001POWER BD They are not compatible.

Similar Messages

Acer Aspire 7750g driver issue.

Hello everyone,
I own an Acer Aspire 7750g-2636G75Mnkk
Recently i updated to Windows 10 but i found out that my AMD Radeon 6650M is not supported, so i switched back to windows 7 with the Back up disc i made with the factory settings.
So i tried to update everything, i used the AMD auto detect tool and it did install to the newest 15.7 driver. After the restart i got horizontal black lines flickering over my screen so i uninstalled it and went back to the factory driver.
Went to the acer site for driver download and i saw there was a "newer" version available. (8.901.4.0).
So i uninstalled the factory one(8.822.0.0) and installed this one. But the installer said when it was done that there were some problems. I checked the log but everything was succesfully installed.
After the restart everything went good until after the login screen. Screen was black with green, i could barely see anything.
Tried to plug HDMI cable into my TV.
Tv screen is normal but laptop screen is still black and green.
So i uninstalled that one again and went back with the factory one. (8.822.0.0)
I am now running into compatibility issues, i can start a program but it closes right after. I can only start it when i put Windows 7 manually in the compatibility mode.
Even some games say my drivers are outdated.
When i do 64bit DxDiag, it says program stopped working. Started it again and it said it had problems accessing the Direct3D. If i don't skip this step, it stops working. But if i do skip it, it runs but when i check the Screen tab, there is nothing. Not even a driver detected.
I can't even open Catalyst Control Center because it says program stopped working and has been shutdown.
I have updated my BIOS to the latest version Acer gave me V1.21
Oh, and i also downloaded all the updates from Windows Update.
I tried different kind of Catalyst Control Center Suites(mostly the same as the newest driver 15.7, horizontal black lines flickering over the whole screen)
So now im stuck.
Someone got an idea on how to fix this?

Hello Guys, Even I had a similar problem. I was planning to take it to service center. But just wanted to try once more so searched in the community and got this thread.My situation is I changed my RAM 2 months ago from 3GB to 8GB on my 5830TG. It was working fine till last couple of weeks until I made one change in BIOS setting and then I tried rebooting then I don't get any screen. my Hardisk looks like it was running. I never got to BIOS screen at all. I got scared & din't know what to do. After reading this post I replaced my new ram with the old once which I had it with me. My laptop booted properly. Then I removed the old ones & added both the new RAM's then the laptop did not boot. Suspecting that one of the RAM must have gone non functional I tried one by one. Both worked fine. Finally I had to insert the RAM properly. Insert it little hard so that it sat fine in the slot. I also reset my BIOS just in case. Great post guys, it helped my try once. You don't know how much time and money I saved :-) Thanks a ton.

Acer Aspire 7750g Power button board compatibility

Hey guys! First post here on the Acer community forum. I have a question regarding my Acer Aspire 7750g. I bought & installed a new motherboard but I've been dealing with a major issue concerning the power button board. It seems to either have stopped working or the ribbon has shorted out, I don't have the means to test which part is defective, but no power is running to the power button board so I can't turn it on. I've been searching all over the place for a replacement power button board to no avail, but came across one for an Acer Aspire 5750. I know that certain components are interchangeable between both laptops but I don't know about this particular piece.
Are there any experts out here that can verify if getting a 5750 power button board would work? Or could this cause some potential problems to the new motherboard? I'm desperate to get this machine back running so that I can work again. Oh, and if anyone knows where I can get a 7750 power button board for a decent price in case the 5750 board doesn't work I would be greatly appreciative.
Thank you

Hello, Aspire 7750g (7750 series and 7560 series):55.RB002.001POWER BD Aspire 5750:55.RFD02.001POWER BD They are not compatible.

[SOLVED] Acer Aspire One - Wireless issue + Wpa_supplicant

Hi there!
I've been using arch on both my desktop and laptop for a while, with wpa_supplicant working perfectly for both of them (University 802.1x auth) I have a config file which works perfectly on the same wireless network with my laptop, but on the netbook I just can't seem to get on it. It's an Acer Aspire One - A150.
This computer uses as we know an atheros chip, which I just can't seem to get working. My laptop on the other hand uses an ipw2200 chip which works fine.
I've installed the madwifi modules, and when doing iwconfig i can see wlan0 listed. If i try to scan for wireless ap's with "iwlist wlan0 scan" it does not find anything.
Doing "wpa_supplicant -Dmadwifi -iwlan0 -c/..../wpa_supplicant.conf -dd " produces the following error
[henrik@scribble ~]$ sudo wpa_supplicant -Dmadwifi -iwlan0 -c/home/henrik/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/home/henrik/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/henrik/wpa_supplicant.conf' -> '/home/henrik/wpa_supplicant.conf'
Reading configuration file '/home/henrik/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 485 - start of a new network block
ssid - hexdump_ascii(len=7):
65 64 75 72 6f 61 6d eduroam
key_mgmt: 0x1
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=21):
68 72 69 30 30 33 40 6d 61 69 6c 62 6f 78 2e 75 xXxXXX@xxxxxxx
69 74 2e 6e 6f xx.com
password - hexdump_ascii(len=8): [REMOVED]
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
priority=10 (0xa)
Priority group 10
id=0 ssid='eduroam'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
wpa_driver_madwifi_init: failed to set wpa_supplicant-based roaming
WEXT: Operstate: linkmode=0, operstate=6
Failed to initialize driver interface
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout
[henrik@scribble ~]$
I really hope some of you have a suggestion to what I can do to fix this, as it's really annoying only being able to use wired.
What I find wierd, is that "iwlist...scan" does not work.
Thanks in advance
-Henrik
Last edited by henrikken (2009-03-24 15:49:54)

two things:
1. Your computer should be using the ath5k driver for the ar5007 chipset that your netbook has... and
2. If the opensource approach doesn't work for you, build this driver.
p.s. (wlan0 will be renamed to ath0)
#Contributor: KJoN <[email protected]>
pkgname=madwifi-hal
pkgver=0.10.5.6
pkgrel=svn
pkgdesc="Multiband Atheros Drivers - hal 0.10.5.6 - svn"
arch=('i686' 'x86_64')
url="http://svn.madwifi-project.org"
license=('GPL')
depends=('subversion')
provides=('madwifi' 'madwifi-utils')
source=()
md5sums=()
build() {
cd $startdir/src
svn co http://svn.madwifi-project.org/madwifi/branches/$pkgname-$pkgver
cd $pkgname-$pkgver
make
make DESTDIR=$startdir/pkg install
cp $startdir/pkg/usr/local/* $startdir/pkg/usr -vR
cp $startdir/pkg/usr/share/* $startdir/pkg/usr -vR
rm $startdir/pkg/usr/{local,share} -r
errr... remember to blacklist ath5k on MODULES on your rc.conf and please, run depmod -a after installing this package.
Luck with your issue

ACER ASPIRE 5560G BIOS ISSUE

I purchased a Acer Aspire 5560g yesterday second hand , lappy worked great. Was updating all the drivers one of which was the BIOS. The install went through and then upon reboot the machine Black Screened. No HDD activity no display. Just a solid Blue light on front bezel fan running. Connected to external monitor and still nothing. From all Ive read it sounds like the BIOS installed hosed. Can someone PLEASE give me a good step by step on how to reflash the BIOS on this machine using a USB drive? I have also reset the cmos battery and reseated the ram.

Hello Guys, Even I had a similar problem. I was planning to take it to service center. But just wanted to try once more so searched in the community and got this thread.My situation is I changed my RAM 2 months ago from 3GB to 8GB on my 5830TG. It was working fine till last couple of weeks until I made one change in BIOS setting and then I tried rebooting then I don't get any screen. my Hardisk looks like it was running. I never got to BIOS screen at all. I got scared & din't know what to do. After reading this post I replaced my new ram with the old once which I had it with me. My laptop booted properly. Then I removed the old ones & added both the new RAM's then the laptop did not boot. Suspecting that one of the RAM must have gone non functional I tried one by one. Both worked fine. Finally I had to insert the RAM properly. Insert it little hard so that it sat fine in the slot. I also reset my BIOS just in case. Great post guys, it helped my try once. You don't know how much time and money I saved :-) Thanks a ton.

Acer aspire ES1-111 issues

Hi all,I decided to register in this community in order to get some advice and opinion about issues I'm experiencing with this laptop. I'm an owner of an Acer Aspire ES1-111 which I bought a week ago. Since its first configuration I noticed problems using it with windows 8.1 (its native OS). For example touchpad or keyboard not working properly and, most of all, shutdown problems. In this particular case I was never able to shutdown properly the device, because it either freezed or remained with the power indicator that continued being "on" although it seemed that the system was shutdown. However, in order to really shutdown I had to press power button. Firstly I decided to reset the system with the integrated software eRecovery but problems remained. Secondly I decided to do a clean install of the operating system and I tried both Windows 8 and Windows 8.1. In both cases, installation process finished without problems but when trying installing all drivers I experienced freezes and again shutdown problems. I followed an order to install drivers (Chipset first, than VGA etc), but in most of cases I had the aformentioned issues. I also tried disabling "Turn on fast startup (recommended)" to no avail. But now comes the strange part... I finally decided to give a try to Windows 7 and, to my surprise, everything is working fine! I was able to install drivers properly and to shutdown or restart my notebook without problems. Now I'm using it with Windows 7, but, as it is in warranty, I would like to ask you what do you think about this issues. I find quite strange that a notebook isn't working properly with its native OS but it's fine with an old OS!! Do you think I should send it to Acer assistance or ask to change it (although, I don't know if I'm still able to pursue this second option). Thanks for your attention! Mic

Bios was set to UEFI when I bought the notebook. System was very slow on its first configuration, probably due to all the third part softwares installed. Also the hdd was not partitioned, something I didn't like. So, after a reset with Acer eRecovery software that didn't solved the slowness of the system, I decided for a clean install with a Windows 8.1 bootable usb stick I had. And, in order to select the boot order desired, I had to change bios mode from UEFI to LEGACY. But, I think that this step was not the best option for a notebook that has a native UEFI bios, as my struggles showed. So, after some research, I decided to reset bios to UEFI, create a usb bootable stick that was compatible with UEFI (through RUFUS software) and run again installation process of Windows 8.1. And this time, all steps were done automatically and without problems. System is far more usable now. Yes, I lost the eRecovery partition, but I can alwasys use the one that the new installation has created.

Acer aspire 5670: Performance issues

I have now kdemod installed, but this has been happening on kde and gnome, so i think it is because of the damn ati video card.
The point is that the system gets completely frozen for some minutes, and then all goes back to normal during some seconds again......
Could it be some issues with the video driver? WHat can i try? Of course, composition is deactivated.
If you reboot the system it seems to be ok for the first minutes, then you can see how the memory usage and the processor usage increases constantly, even when you are doing nothing.....
Any suggestions would be apreciated.
Thanks!!!

What video driver do you use, open or proprietary? Do you run with or without xorg.conf? If you use xorg.conf, it could help to post it. Do you use KMS (kernel mode setting). Personally, I had problems with an ATI card and KMS, so I disabled it and my problems went away. See wiki article on how to disable it:
http://wiki.archlinux.org/index.php/ATI … _.28KMS.29
On the other hand, some people report performance improvements using KMS, so you may want to set it up according to the wiki article and see if it helps.
Did you look into, e.g. htop, during times of high CPU usage?

Acer Aspire One A0A 150: screen flicker, blanking (intel driver?)

Being the stubborn sort, I've been struggling for more than a month with the following problem, to no avail.
The screen on my Acer flickers while running X (seems to be independent of window manager I run.) Even worse, at random intervals, the screen will actually go completely black (or sometimes green or blue, but usually black.)
To be clear, I am not absolutely sure the flickering and screen blanking are related to each other... only 90% certain.
The flickering and blanking seem completely unrelated to what I'm doing on the computer. The blanking will happen if I'm watching a movie, or even if I'm simply typing an email (in fact, it has happened as I typed this post!) When the screen blanks out, the only way to recover it is to shut the lid of the laptop, wait a couple of seconds, and open it again. Closing the laptop lid suspends the laptop and the screen seems to recover when the computer wakes up. Nothing else seems to bring the screen back: not console switching, not killing X, nor any magic key combination. Before I figured out that suspend/resume would bring back the screen, I had to reboot it with SysRq-B.
Although the flicker/blanking happens frequently, it leaves no traces I can find in either dmesg or Xorg log. I do not use an xorg.conf file.
One MIGHT think it is a hardware issue, but it NEVER occurs when I boot into Windows XP. I have used XP for days without any flicker or blanking (hence one reason I think the two issues are related.) Also, I'm pretty sure it doesn't occur when I boot the computer into xPUD.
Some research led me to think my issue might be with the intel driver. With that in mind, I've tried different versions of the driver:
xf86-video-intel from both extra and testing.
xf86-video-intel-git from AUR
xf86-video-intel-newest from AUR.
(In each case, with the appropriate dependencies, etc.)
Presently, I'm using the driver from testing, but none of the drivers has made any noticeable difference: the problem remains.
Finally, I am using Tera's one-dev kernel for the Acer Aspire One, available in AUR.
Does anyone have any idea how to fix this issue? It's driving me to rely on Windows XP a lot more often, as suspending/resuming the laptop when it blanks out really interrupts my work. Please save me from Windows :-)
Last edited by tw (2009-12-29 09:48:09)

damjan wrote:UVESAFB and KMS will probably never work together. Just use KMS it's way better (and you should be able to run same splash on KMS too)
Thanks. Means I yet again learned something about linux the trial and error way.
I actually used a setup where KMS was disabled and UVESAFB enabled, since the Arch Wiki entry on Splashy strongly recommended UVESAFB and didn't mention KMS. Oh well. KMS enabled now, the UVESAFB daemon thrown out. I should probably get a wiki account, suggest a clarification of that entry to prevent other newbies from making the same mistake.
EDIT: Added a section on KMS to the Arch Wiki entry on Splashy
Last edited by caligo (2010-01-11 12:49:01)

New Printer HP2540/301 Acer Aspire 1 laptop has no disk drive and an idiot user. PLEASE HELP....

I bought myself a nice new 5240 all in one 301 printer on Wednesday.
Since then i have done nothing but fight with it ever since.
My laptop is an Acer Aspire one, one of the smaller ones, which unfortunately doesnt have a disk drive in it. My first thought went to downloading drivers. The web page didnt work and i realised then, that without the user manual (which i suspect is on the disk) i am totally lost.
So could someone please help me.
I have done a print out, which says.
Check your HP printer network name (SSID) matches your wireless router network name (SSID) exactly.
If they do not match exactly, run the wireless set up from the printer software to configure your HP printer.
I am assuming this is the software on the disk. Is there a way of downloading the software from online?
Any help would be gratefully accepted as i have no clue what i am doing atm. I am only just starting to learn how to use Windows 8 properly atm, up until now my whole computer skills hass been how to open a browser and office.
Thank you.i should also add, i have downloaded the app too, but that doesnt recognise that there is a printer there at all.
This question was solved.
View Solution.

Hi, here is the link for the driver.
Link for the user's guide.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Driver Updates for Acer Aspire 5750Z Help

I have successfully did a complete System Restore,which worked great. Bit I'm sure that some, ifnot allo, my drivers should be updated. Where do I get driver updates for Acer Aspire 5750Z. I have never done anything like this before so if someone could give an old man any advice as to how I should do it would be appreciated. Thank youG

http://us.acer.com/ac/en/US/content/drivers/3681;-;Aspire%205750Z here you will find the latest available for your model, simply click on the download link of the drivers you need to update, then unzip the file (just right click it and choose to extract), then browse to the driver folder and double click install.exe or setup.exe, then follow on screen instructions.

HT1369 Microsoft Windows 8 x64 Home Premium Edition (Build 9200) Acer Aspire V5-552 iTunes 11.1.4.62 QuickTime 7.7.4 FairPlay 2.5.16 Apple Application Support 3.0 iPod Updater Library 11.1f5 CD Driver 2.2.3.0 CD Driver DLL 2.1.3.1 Apple Mobile Device 7.1.

unable to contact my iphone or ipad to itunes
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Acer Aspire V5-552
iTunes 11.1.4.62
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 3.0
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.0.32
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 009DB88803B66C30
Current user is not an administrator.
The current local date and time is 2014-01-24 20:53:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.4.62 (x64) is currently running.
iTunesHelper 11.1.4.62 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Device Sync Tests ****
No iPod, iPhone or iPad found.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

I have an acer aspire TC-220 WIN 10 I cannot get my pc to boot from CD drive this is driving me mad

HiI have an Acer Aspire TC-220 desktop 16gb ram 3 tb hard drive AMD A-10-7800 RUNNING WINDOWS 10This is driving me mad I cannot for the life of me get my PC to boot from the CD drive I believe you have to change the drive in Bios from the UEFI drive to a legacy drive there is no provision to do this I have tried everything in the Bios nothing works I have set the 1st priority as the cd drive please can you helpmany thanks

ecneps1948,
Is the optical drive being seen and is usable in Windows itself?

Acer Aspire v3-111P-C9Z3 SSD Upgrade issues

Hello I bought an Acer Aspire v3-111P-C9Z3 last summer and this summer bought an SSD to upgrade it with. I plugged the SSD in through my external USB dock, cloned the OS and tried running it. The seemingly simple operation ended when I got a "No Bootable Device" message from the Acer Bios. Running on legacy mode nets me a similar error. I used EaseUS to clone the OSI bought a 120g PNY SSDCLoned win10 the BIOS seems to recognize that the SSD is there (In the BIOS load order in the f2 screen it says something like " HDDSD-XXXXXXXXXXX" but it doesn't boot up the OS from the SSD the way that would be expected after being cloned. I appreciate anyone's help. I'm pretty computer-literate and have been looking around but have not found anything to fix this yet. Thanks

you can try to repair the cloned OS with a windows bootable media, boot from it and choose repair my computer then troubleshot and check if automatic repair/startup repair is able to fix it. Honestly, i would prefer to make a fresh install switching from HDD to SSD, since Windows makes some tweaks when installing on SSD (Trim, garbage collector, alignement)

Acer aspire v5 131 start up issues

Hello, I have an Acer aspire v5-131 and its 2 years old. It's windows 8 I got the message where I can auto update to windows 10 so I decided to do that but never noticed any difference. The problem where it can't get past the start up and there's 3 different types. 1. It shows the acer logo and the loading animation but then the screen goes black after 10 minutes. 2. It says preparing automatic repair then the screen goes black after 10 minutes. 3. It says "Scanning and repairing drive (C but stops at 47%. I've waited 3 hours but it still didn't progress after that.

if you don't have a recovery media, please download the iso for windows 10 and create a bootable media with it:https://www.microsoft.com/en-us/software-download/windows10 once done, try to boot from it, press F12 at boot and select your bootable media. if it boots try to enter safe mode as i wrote in my previous post.

Blu Ray optical drive on Acer Aspire V15 Nitro ?

Which Acer Aspire V15 Nitro laptops are able to run Blu Ray?

paauxusa,
Here's the Nitro notebooks that have BluRay players I can see:
VN7-791G-70XG
VN7-791G-7939
VN7-791G-71P5
VN7-791G-78VY
VN7-791G-78VM
VN7-791G-50ZA
VN7-791G-77LV
VN7-791G-76LH
VN7-791G-75MV
VN7-791G-73ZL
VN7-791G-76GA
VN7-791G-78X5

[Fixed]Acer Aspire 7750g driver issue.

Similar Messages

Maybe you are looking for