Fixed amount condition changes depending on GR qty

Dear Experts,
Fixed amout condition is added in the Item - condition tab.  Fixed value = $50.
Created PO for 100 qty with price per EA = 10.  So, we expect the Invoice value to be 1000+50 = $1050.
But we did GR for 200 Qty.   Since the condition type is fixed amount, we expected the delivery cost to be still $50 and total value  to be 200 X10+50 = $2050
But, SAP calculations were different from what we expected.  The fixed amout was changed as per the GR qty. and the PO total becomes $2100 (Fixed amount changed to 100 since GR qty = 2000)
Why the fixed amount doesnot remain fixed?  How come the fixed amount increase depending on GR quantity?
Please suggest if there is any settings?
My confition type (ZFB3 has calc. type = B fixed).
Regards,
Shashidhar

we have not implemented any programmed solution, we are just doing unplanned delivery costs.
Business had a strong request during the project, I found this note, and even had a consultant from SAP directly on side regarding this issue, but we did not find a satisfying solution.
And the more you think about this issue and talk with the users about the possible variations that can happen, which have to be covered in a program, the more you will find out that it is not possible to make this happen.
Just think about the situation that the receiver posts a goods receipt in single portions because of different batches.
(always keep in mind, that the receivers often are just warehouse workers, not having the advanced SAP skills of a consultant. So they might do the work different from your expectations). How shall SAP act, shall the fix amount go to each partial receipt?  What shall happen if he entered a wrong quantity?  you know that you can cancel the whole material document, but it is as well possible to just post the differnce quantity with 102 movement. How shall this be done with fix conditions.
You may find a solution   that works specially for your company,
but a general way is hard to find.

Similar Messages

  • Fixed amount condition types

    hello, friends.
    i have a condition type which is a fixed amount, and which i enter at item level.  the amount is $1,000.00.  the order quantity is 100, so that SAP distributes the fixed amount among the quantity, so that it comes out as $10 per unit.
    i create a delivery with reference to the sales order, but since the configuration allows a delivery quantity greater than order quantity, i edit the delivery quantity as 150 units.
    now i create an invoice.  but the fixed amount condition type, instead of showing as $1,000.00, is calculated as $1,500.00 instead.  it takes the 10$/'unit in the sales order and multiplies it with the invoiced quantity.
    the current settings for the condition type is entry at item level only.  we considered entering this at header level but i don't think this will help.  i am thinking the fixed amount will still change according to the invoiced quantity (also when considering multiple partial deliveries, invoiced collectively or partially).
    would there be settings in the copy controls or in the condition type, or maybe in the pricing procedure to make the amount truly fixed?
    many thanks.

    Hi,
    > how this is distributed can either be per line item quantity, or by value. 
    System will distribute the amount proportionately amongst the item according to their qty.
    I think you should make the condition as header manual condition or you can use std header manual condition type HM00.
    Enter this condition in the header of Sales Order. The amt  will be distributed amongst all the items according to qty.
    Now even if you change the qty in the delivery, if you have maintained pricing type as D / G system will copy old amount from the Sales Order unchanged because it is Header Condition and not the Item condition.
    > so with pricing type D, what does not change?  the entire fixed amount or the per unit (distributed) amount?
    As per my knowledge, if you have maintained condition record for any condition type and you have used pricing type as D and when there is any change in the condition record after creation of Sales Order that times, that time system copies all the pricing from the sales order unchanged into invoice. It will take old pricing from the sales order.
    Hope you get some idea.
    regards,
    Sagar

  • Rebate fixed amount condition in the pricing procedure

    Hi SD Gurus,
    i'm using rebate fixed amount conditions (Lum sum).
    The situation from a business point o f view is the following: i pay the customer 1000$ once he made something.
    This kind of condition is not relevant for accruals since they have to be built manually (manual accrual). As a consequence i'm note sure if this condition shoul be put in the pricing procedure used for invoices. In the other and for sure this condition should be inserted in the pricing procedure for manual accrual/credit note.
    What is your point of view!!
    Thanks
    C

    if you are going to use Rebate, then there is no need to add condition type in standard pricing procedure, if you have designed your pricing procedure, include condition types for rebates as in standard pricing procedure.
    This condition type is linked to Rebate type.
    I think you first try the scenario in IDES and then do the same settings as per yoru requirement.
    If you want step-by-step procedure for rebates will help you
    Please refere the thread
    rebate documentation
    Regards
    Jitesh

  • Fixed amount condition

    Hi,
    I currently have a header surcharge condition which is set to fixed amount.  For one sales order and two billing documents, the fixed amount is coming on both billing documents it is not splitting..is this the correct behaviour?  Can this be set so that the amount is split?
    Regards.

    Hi
    Could you please let us know as this is Fixed amount condition it is header or Item level condition?
    Check the Calculation type in V/06 for your condition tyep it should be B
    If you have order related billing then check VTFA
    Once reviewing the type of order to invoice, go to the item level. Choose the item category in question. You will find field 'Pricing Type'
    Make pricing type as D: Copy pricing elements unchanged. The system
    copies the pricing elements unchanged with automatically determined or manually entered surcharges and discounts from the reference document (scales are not read again). This means that the value remains unchanged even if the billing quantity is different to the order quantity. Does not redetermine the taxes

  • Fixed amount condition type

    hi,
    My scenario of business is such that whatever b the quantity mine amount will remain fixed.
    how to have a fixed condition type?
    Please help.
    Kaustubh

    Hello,
    In the V/06 Condition type details, select your condition type and maintain the Calculation type as B which is fixed amount.
    This will not change according to the Quantity .
    While creating the Condition records in VK11 dont maintain UoM .
    This will work.
    regards,
    santosh

  • Flat Fixed Amount Condition type

    Hi Experts,
    Have configured a condition type with Calculation type as "B" fixed amount and Scale basis as "B" Value scale and in Control data have used "Currency Conv." and "Accruals" as ticked.
    Now problem is since this is being Fixed amount amount should not be distributed but while making Goods receipt for partial quantity it is postng condition amount proportionately. Instead it should post on a fixed basis.
    Thanks

    Thanks for the reply
    but No, i dont want to have this as header condition as dont want to distribute based on quantity posted instead want that the fixed amount mentioned against condition type should be charged on flat basis irrespective of quantity received.
    Have used "B" as calculation type evn with this it is distributing proportionately and that is the problem.

  • Manual Excise duty with fixed amount in Sales order

    Dear Sir/Madam.,
    This is regarding manual excise duty with fixed amount in SD Module . I
    have created three conditon type ZEXP,ZECS,ZA1X for BED ,CESS and HSED for manual excise duty with fixed amount, other than the standard condition type JEXP,JECS,JA1X , because  my TRADING SALE scenario needs both condition type with fixed percentage and fixed amount conditions also.  After the pricing procedure updation for trading sale, I have tried to create the sale invoice with VF01 , it is ok till  the VF01 for manual excise duty but when ever I tried to excise posting with J1IIN. the manual excise duty show only zero, whiile we used the  standard Condition type JEXP, JECS, AND JA1X with fixed percentage  8% -2% -1%  our over all steps are ok till J1IIN for excise invoice, mean BED ,CESS and HSED shown correctly.
    I have done some experiment with the TAXINN tax procedure in (Logistics general > tax on good movments> india> basic settting>determination of excise duty> Maintain excise default), I have replaced the condition types  JEXP, JECS and JA1X with the ZEXP, ZECS and  ZA1X in the corresponding filed. then after my manual excise duty with fixed amount data  was reflecting
    in the J1IIN and it start to work properly with the excise duty but my fixed percentage condition type stop to working mean, it was now showing the duty at the time of  excise duty posting J1IIN .
    I want to use both the condition types in the same TRADING SALE scenario. May anybody help me to solve this issue.
    With Regard
    Vijay Kumar

    Dear Mr. Siva,
    Sorry for the late reply, actually I was out of touch from this issue for few days. I am sending you the detail about my configuration----
    I have assigned this condition type as following ... 
    TAXINN     ZA1X     A/R AT1 Quantity based
    TAXINN     ZECS     A/R Cess Quantity Based
    TAXINN     ZEXP     A/R BED Quantity based
    Condition type information
         Control data 1
    Cond. class       D  Taxes
    Calculat.type     Q  Commodity
    Cond.category  D  Tax
    Rounding rule         Commercia
    StrucCond.
         Change which can be made---
    Manual entries      C       Manual entry has priority
    Still it is not showing the duty at the time of (J1IIN)
    It may be I am missing some configuration or wrong configuration.
    give me some hints...
    thank you
    Vijay

  • Fixed amount discount at service level.

    Hi,
    I have created WO & i have entered discount for service for fixed amount.
    Eg: WO service value  qty = 10 & value = 100 = 1000 rs
    fixed amount discount = 100
    But while creating service entry at first service entry system show total discount.
    service entry for 50 % = 5 * 100 = 500 & discount it is taking 100 = 400
    for the second service entry again the system is taking total discount.
    service entry for remaining 50 %= 5 * 100 = 500 discount 100 = 400
    why system is taking discounts at both the service entries.
    pls help
    Regards
    kumar

    Hi,
    do you use the header condition KR01 for this purpose - see the note 353482  for more information?
    If yes, I am afraid that the functionality you would like to have regarding  header condition like KR01 for fixed amount is not supported in  the system. Please kindly notice this condition type is defined as  percentage condition.
                                                                                    As per note 353482 it is possible to maintain header condition on the service outline level. This note explains which condition   types are available.
    There is unfortunately no condition type for fixed amount available that would be distributed proportionally to the accepted quantity in the entry sheet.                     
    Regards,
    Edit

  • Fixed Freight Condition Not Reflecting In DCGR

    Hi everyone! I am having issues with DCGR documents. My frieght condition does not seem to reflect in the DCGR document when I post the goods reciept.
    Here are the details of the condition:
    Condition class - A (Discount/Surcharge)
    Calculation type - B (Fixed amount)
    COndition category - B (Delivery costs)
    I have also maintained the access sequence for this condition but still unsuccessful in getting the amount included in the delivery cost document.
    Thanks in advance!

    Hi,
    Do you mean that your Frieght Cost should add to your material Cost? If so check whether you have activated the Accural key in Frieght Conidtions and also Check the relevant G/L account is assigned in OBYC settings against Transaction key.
    Hope this will help you.
    Tks
    Mani

  • Manual Excise condition type with calculation type as FIXED AMOUNT

    Dear Gurus,
    I have used a manual excise condition (JMAN) in my pricing procedure the difference is that I've changed its calcultaion type to FIXED AMOUNT.
    And in the same pricing procedure I have also got a percentage based Excise condition (ZEXC).
    And in any transaction either of the one that is JMAN or ZEXC will be used.
    The Manual Excise condition is used basically when the raw material sale takes place. The requirement is as such that they should be able to enter the duty value in INR and not in percentage. Please go through the example below
    *(For Example I am procuring raw material of 100 kg worth 10000 at 8% of excise duty. Excise duty will be 800 for 10000rs. So it will be 8 rs per KG.
    And now suppose I am utilizing 80 kg for production and want to sell remaining 20 kg. the Excise duty charged should be 160 rs. considering the rate per unit is 8rs.)*
    In this case user wants to enter the value in INR and not in percentage.
    And normally for the finished goods the percentage based condition is used.
    Now what my issue is that how will I copy the value from JMAN to ZEXC at the raw material sale. otherwise my finished good sales is happening without any problem.
    For this should I use any routine to copy the values from ZMAN to ZEXC??
    Or rather is it possible that I could copy values from a condition type whose calculation type is FIXED AMOUNT to other condition whose calculation type is percentage.
    How should I go ahead with this??
    Please guide me.
    Any answers??
    Cant Do it this way??
    Thanks & Regards
    Anand.k
    Edited by: anand k on Jul 8, 2009 6:38 AM
    Edited by: anand k on Jul 8, 2009 1:04 PM

    Check the condtion value in condition type UTXJ . If the JMOD value is 10% of UTXJ then assessable value should have been maintained for the Material and Plant combination in J1ID. This is due to Routine 351 maintined in pricing procedure for the condition type UTXJ
    check and confirm
    Senthils

  • Invoice amount not change according to qty

    Dear Experts,
    Po qty 10 unit & price is RM1/unit.
    GR has been done for full qty.
    Now I'm going to to perform IV via MIRO. Let say I receive invoice for 4 qty. So when I enter PO no in MIRO, system pull all the information from GR that done against this PO. Now I wanated to change qty as 4 but the header amount still shows as RM10. It doesnt change according to invoice qty. And also the accounting entry reflect based on RM10 not based on invoice amount (RM4). Appreciate if you could brief me on this. How may I set this in SAP.
    rgds,
    nantha

    hi,
    the grey filed u  can make its editable mode by T code - SHD0.... here u give
    T code - Miro
    Trans variant - ZMiro and then click create button. .it will take u to the Miro transaction , where u enter ur  po number and excute.. here u can see ur amt field will be checked , just unchedked and save this variant .as well acitvate the variant.. later u can check the miro with amt option in ediable mode

  • How to batch change multiple adjusted images by a fixed amount?

    Anyone know of a way to change the adjustment values of multiple previously adjusted images by a fixed amount? For example, if, after adjusting exposure of multiple images by various amounts, I want to lighten them all by 0.5, is there a way to do this? If I lift an exposure adjustment value of 0.5 from one image and stamp it on others that have non-zero values of x, even with the stamp option set to "add" rather than "replace", they all end up with exposure 0.5 rather than x + 0.5.

    Nope - no way. but... you can add a different adjustment that does the same thing. For instance if you adjusted the exposure individually and you want to lighten them by a fix amount on top of that you could just add a levels or curves that does the exact same thing.
    RB

  • Fixed amount excise duty

    Dear Experts,
    We have maintained condition record for BED, Scess and SHcess in our company. Now, a new requirement has come up to maintain automatic as well as manual condition types for excise duties. Whenever we enter the manual excise condition type, it should overwrite the automatic condition value and it will be a fixed amount rather than percentage. How to do these settings. Kindly help me.
    Thanks & Regards,
    Reji

    You can use JMAN condition for your requirement. , you can change the settings (V/06)  based on your requirement.
    Check the below link allready discussed by others in forum. , you can also search in forum for more threads.
    Manual Excise Duty problem

  • Maintaining of conditon type MWSI as fixed amount rather than the percentag

    Hi,
    We are facing problem in output tax MWSI, We want to maintain this as fixed amount rather than the percentage value. if we change the calcuation type in Condition mwsi system is not creating the invoice thorugh idoc. it is giving error and we are not able to generate accounting document. any help how to  maintian the tax as fixed amount rather than the percentage values.

    try with settings in condition type  and change the condition class
    Other case
    If its a item condition, maintain a condition record in vk11 with value
    zero. the condition type will be displayed everytime with blank column where
    the users can enter values manually.
    null

  • How to handle case like Housing loan to pay the fix amount and system can deduct the principle and interest automatically in Treasury

    Dear Treasury Guru,
    I have one scenario from my client like a Housing Loan that the system can generate the principle and interest paid flow type automatically depend on interest and contract condition, I've never faced this scenario before so I'm not sure that Treasury can support or not.
    for example : Loan amount = 500,000 USD, Fix amount = 50,000 per month, Interest rate = X%
                              Payment amount               Principle           |        Interest
    1st month =               50,000           --->         15,000                      35,000
    2nd month =              50,000          ----->        17,000                      33,000                   
    3rd month =               50,000         ------>        19,000                      31,000
    Please suggest how to let the system generate the Principle and Interest flow type folllow the example above.
    Thanks
    Pongrapee K.

    Hello Pongrapee,
    I think apart from the interest condition, you need a condition for an annuity repayment with amount 50,000 - this will make sure the sum of interest and repayments are 50,000 for all periods.
    If you leave the annuity amount blank, the system will calculate the annuity in a way that the sum of interest and repayments remain constant and all the nominal is repayed at the end of term.
    But in both cases you will have to give the interest percentage in the interest condition.
    Hope this helps!
    Marie

Maybe you are looking for