Fixed amouny of frieght charges

Hi,
I am trying to create a condition type for FIXED frieght amount to be charged in sales orders.
The problem is that if the delivery quantity chnages, the value of freight also changes accordingly while billing.
How can it remain fixed for whatever is the delivery quantity.
For example, if in sales order of 100 pieces, my frieght amount is 80. If i ship 60 pieces then frieght must remain 80.
SAPXPT

Dear SAPXPT,
Check if scales are maintained in condition record if maintained remove them.
Regards
Mayank

Similar Messages

  • How to make frieght charges fixed irrespective of the qty

    hello sap gurus
    how to make frieght charges fixed irrespective of the qty
    my client

    Hi Deepak,
    This is not possible in the standard.
    Condition types (with calculation type 'B' "Fixed amount", FRB1 for example) are always posted dependent on the quantity in SAP standard functionality.
    The calculation is made as follows:
    FRB1 (Fixed amount) = (Condition amount * GR Quantity) / PO Quantity
    The problem here is that it is unclear how the posting logic should work especially if you have partial goods receipts or return deliveries.
    For example, if you order 10 pieces with 10 GRs of 1 piece each:
    should the system now post this condition with the full amount with every GR?
    Should it post it only with the first GR?
    And how should it be when you create a document to cancel a GR?
    So the system always posts with regards to the quantity.
    Best regards,
    Esther.

  • How to address the Provisional  frieght charges

    Hi
    how to address the provision freight charges
    Like the exact frieght charges and other charges are not known at PO level.
    the exact value is known at LIV level.
    secondly my client is preparing PO only once in a year and the friehgt charges and other packing , farwarding charges tend to change or will be known at time of bill passing.
    Pls help me out
    Chris

    Hi Chris,
    At the time of doing LIV you can book those expeses as unplanned delivery cost in detail tab. If vendor is different than material vendor than put another vendor code in vendor field.
    Your problem will be solved
    Regards
    Vivek Sharma

  • Tax calculation with and without Frieght Charges

    Hi all,
    My Pricing Procedure is defined in the below mentioned way:
    Present Scenario:(Tax 4% is calculated on Freight Charges)
    Base amount = Rs.100/-
    Freight =          Rs.20/-
                           Rs. 120/-
    Tax 4%  =        Rs. 4.80
    Total               Rs. 124.80
    New Scenario:(Tax 4%is not calculated on Frieght charges)
    Base amount = Rs.100/-
    Tax 4%   =       Rs.   4/-
                           Rs. 104/-
    Freight =          Rs.20/-
    Total =             Rs. 124/-
    How to map the new scenario,, infact my client want to use both the above sceanarios in a Pricing Procedure,,
    how to define it?
    please help me out,
    thanx in advance
    urendra

    Create a same freight condition type with reference to the freight condition type already present in ur calculation schema.
    now assisn the new condition type in ur pricing procedure upon the From and TO based on the subtotal like:
    Base amount =                   Rs.100/-
    Freight (old condition type) = Rs. 0
    Rs.100/-
    Tax 4% = Rs. 4
    Rs.104/-
    Freight (new condition type) = Rs.20/-
    Total Rs.124 /-
    regards,
    indranil

  • How to hide the FRIEGHT CHARGES.. URGENT

    hi guru's
    Can anybody explain how to hide the frieght charges in PO print out.If the frieght vendor is different from Main vendor, my client wants to Hide the frieght charges only in Print outs, please any one explain the configuration details for this.
    PLEASE EXPLAIN ME STEP BY STEP .. IM NOT GETTTING
    thanks
    sap mm

    hi
    path
    SPRO>Materials Management>Purchasing>Conditions>Define Price Determination Process-->Define Calculation Schema
    here select ur pricing procedure--> select control data and then in Print column put ' <b>X'</b> ( 10th column )
    ( Or use M/08 as short cut trnx )
    Vishal...

  • Need to populate 'Order' field for Frieght charges related GL account item

    When we are creating Billing Document for outbound deliveries, we need to populate a spcific value (which is fetched from a bespoke table) in the 'Order' field (COBL-AUFNR) corresponding to the Frieght Charges related GL Account item in the accounting document.
    Can anyone please suggest which user-exit/badi/bte we can use to implement this enhancement?
    I have seen that there are some user-exits with names such as EXIT_SAPLV60B_XXX ('001' to '008') and several others. Please suggest some useful solution.

    Hi
    U can use the exit 004, 005 and 006.
    Max

  • Frieght charges include for particular customer

    Hi,
    How to include frieght charges for the particular customers towards freight charges  recovered from them.  Credit into Freight Charges received (GL account  No: 310010 ).
    Frieght amount should shown in invoice also.
    How to do that above issue.
    Please help me to resove this issue.
    Thanks,
    Suresh

    1)  Create a condition type in V/06 as a header condition and assign the same in your pricing procedure. 
    2)  Assign an appropriate Account Key against this condition type.
    3)  Maintain the said G/L account in VKOA
    4)  Finally when you generate billing go to header condition tab and key in this condition tab and click "Activate" button at the bottom right.  Maintain the required freight value and save.
    thanks
    G. Lakshmipathi

  • Frieght charges include for particular customer and also include in invoice

    Hi,
    How to include frieght charges for the particular customers towards freight charges recovered from them. Credit into Freight Charges received (GL account No: 310010 ).
    Frieght amount should shown in invoice also.
    How to do that above issue.
    Please help me to resove this issue.
    Thanks,
    Suresh

    Hi,
    maintain condition type kf00 for fright in your pricing procedure as a manual condition and maintain condition record for combition customer in vk11 or give in sales order manually.
    g/l account part u need to maintain separate g/l account for fright in vkoa transaction.
    Best regards
    Srinivasyadav

  • Puechase order for frieght charges.

    Dear Experts,
    I have following query.
    I am purchasing a raw material from a vendor (1000) with frieght charges. The frieght charges has to be inventorised and the amount is to be paid to frieght service providing vendor(2000). Hence created a purchase order for raw materials for vendor 1000 and against frieght condition value of frieght is entered and vendor 2000 is assigned to the same. But I have to give the purchase order to frieght vendor 2000 also because i am purchasing service from him.
    Please guide me how the same is to be handled in sap.
    Thanks & Regards,
    Aaditya

    Hi ,
    try following
    Create a new condition for freight and remove tick of accruals in the condition(copy with existing freight key),
    now assign this condition in your pricing schema ,
    now while creating the po add this condition, give value to be paid ,
    then select condition and clickon detials button , here you will get option to enter another vendor
    now do gr and and then MIRO
    now you need to do two invoices one for material (vend 1000)and second for freight (vend 2000)
    Now to refer Po to 2000 vend ,
    create a new ZFORM  with new output type for the freight vendor and take the value from freight condition on Po print (Take help of your abaper )
    hence the PO wil be same and the prints of material value and freight value will be different prints

  • Frieght Charges in Scheduling Aggreement

    HI ALL,
    Please can any one tell me where exactly we have to update the Frieght charges, CVD and other Conditions in a Scheduling Aggreement for an IMPORT Vendor.
    Pls let me know.
    Regards,
    Nagaraj S

    Hi,
    While creating SA select from Menu Bar Header & Conditions & provide which ever condition you need to include as Header condition that would be distributed accordingly for your line items.
    It works same as it works for PO.
    Regards

  • Rg: Frieght Charges

    Hi all,
    Below is the requirement for freight
    After creating a PO without frieght charges (because they do not know what will be the mode of transport), each transport cost are different and the delivery of po make take 3 months.
    The mode of shipment can be known during shipement notification which we enter during vl31n or during goods receive. Based on the mode of transport,like half truck load cost less, where as full load cost more.
    How we can track this freight charges apart from po..i think just condtions types in po won't work.
    Your input will be helpful for me.
    Thanks & Regards,

    Hi,,
    Thanks for the input.
    But the real probelm is that we need to maintain them in shipement notification. i.e we need to track this all way along inventory.
    we nned to know which type of movement it is allowed.
    Will the shipment VT01n will work.
    Thanks & Regards

  • Frieght Charges Booking

    Dear Friends,
    we created PO and added fright Charges for a vendor for Rs. 100. and GR/IR also done while doing MIRO with Vendors Bills showing the Frieght Charges is Rs. 200/-  how will settle this.
    please advice
    Thanks
    Rajesh G

    Hi,
    please try posting the MIRO document with the variant planned delivery costs (since you created the PO with frieght conditions) then system will only take the frieght , if the variant is items+delivery costs it will take the entire amount.please check wheather you have posted the MIRO with the second option.
    If you want to post additional frieght other than there in the PO, post them as unplanned during MIRO.If not you can post them by subsequent settlement.
    Regards,

  • Please help: need fix for battery not charging on iPhone 4 since install of IOS5 SAYS "NOT SUPPORTED BY THIS ACCESSORY

    Can someone help me fix my issue: not charging in wall outlet but will charge in usb port. It seems this happened right after install of ios 5.0.1
    Thanks so much!

    I have experienced the same issue. We have a USB power adaptor and a cable that we routinely use to charge our iPhones in the kitchen. While my iPhone4 keeps showing that error message, my wife's iPhone4S and all the kids iPods are charging just fine. Not a chance for a faulty power adaptor or cable.....
    It also started very recently. My iPhone can be charged with my computer, my car's charger so my dock connector has to be OK. It's as if the hardware signature of the USB power adaptor is no longer recognized. Also coincides with recent software update....

  • If I take my Iphone 5c to the apple store to be fixed with the service charge of $269, if they can't fix it do they replace the phone? Or will I have to pay retail price for a new phone?

    I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?

    They do not repair at all.
    The replace.
    The $269 is for a replacement.

  • Orders consolidation and Frieght charges in delivery

    Hi SAP gurus,
    Scenario: customer 'x' places orders every day. once the material is available we want to ship it. so lets say that for orders placed on monday and tuesday ...material is available on wednesday. so i consolidate the two orders and make one delivery. and then after packing the delivery, shipper will call different frieght companies and get quote and  choose one depending on rate and time. once he get that information he wants to add that charge in delivery.what do i configure this scenairo in sap and how do i add freight charges in every delivery??
    please help me out.

    Hi All,
    Thanks for your inputs, how the system detemines the price at billing it has to copy from sales order and delivery at simultaneously.
    Is it possible to get all the conditions from sales order and only frieght from delivery and combining these in billing.
    And what pricing type do we need to maintain in copy controls?
    Thanks in advance.
    Raj

Maybe you are looking for