FIXED! Another install failure issue

I have a problem I haven't seen before. I have Windows XPSP2
and IE7. I am trying to use the standalone installer for Flash
9.0.47.0. Installing from the automated website doesn't work. It
tells me that it failed. I used the official Adobe Flash
uninstaller several times with rebooting in between, as instructed.
When I attempt to install the standalone file, this pops up
immediately: The version of Adobe Flash Player ActiveX that you are
trying to install is not the most current version. Please visit
http://www.adobe.com/go/getflashplayer
to obtain the latest, most secure version.
This also happens with version 9.0.64.0 RC.
I am fairly computer-literate, but can't figure this one out.
Any ideas? TIA

Thanks Darren. Since I have been trying everything, I had
already tried that. It wouldn't accept that command, something to
the effect of this is an invalid thing. However, I FIXED THE
PROBLEM! I was just getting ready to post my solution here. I had
used the official uninstaller, but I read somewhere else that there
was still stuff in the registry that was the problem. The task was
to do a search for Flashplayer, Flash, things like that. I tried
flash first, but there were too many unrelated things. Then, I
tried flashplayer. I noticed that they were always in Macromedia
folders. This has got to be old stuff, I thought. I had already
backed up the registry, so I deleted the macromedia folders. I
think there were two of them. I also did a search for macromedia,
just to see what I could find. Also, in Internet Options, there
were four nonsense things unknown in the view objects section. I
deleted those. I don't remember the exact order I did things, but
then I rebooted and ran CCleaner registry checker and Norton
WinDoctor. They found a lot of stuff. Then I rebooted again and
checked everything again and it seemed really clean. I tried the
standalone installer for the hundredth time, and IT WORKED smooth
as silk. I have been working on this problem for days, scouring
Google for ideas. I am only moderately computer literate, so it
took me a while to get this straight. I wish there was a better
uninstaller, but I guess macromedia didn't care. There are a lot of
people having trouble now.

Similar Messages

TS3212 How to fix iTunes install failure on Windows 7?

Current ITunes user on Windows 7 & app working fine. Dialog box pops up stating update to install. Proceeded but install failed with suggestion to download update. Down loaded off Apple web site. During installation got message activating mobile devices failed even when user had administrative privileges. I chose ignore. When I ran new iTunes install got "Program can't start because MSVCR80.dll is missing..." Tried reinstall. Same problem.
Suggestions?

Try the troubleshooting for that error code on this page : Apple software on Windows: May see performance issues and blank iTunes Store
Or there is this post which appears to have worked for a number of people : error iTunes Store : 0x80090318 (the solution).

Another install failure of the preview Netweaver (ABAP)

This is an install on a CLEAN machine. No previous installation attempted.
log.txt says:
(Aug 30, 2008 7:09:10 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/Matt/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME~1/Matt/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
MaxDBSAPNWPREV.log says:
Sat Aug 30 07:08:58 CEST 2008 MaxDB: Calling: C:/sapdb/NSP/_tempLocation/sdbinst.exe -t sapmds -f "C:/sapdb/NSP/_tempLocation/sapmds.txt" -p DBNAME=NSP -p SOFTWAREPATH="C:/sapdb" -p INSTANCEBACKUP="C:/sapdb/NSP/_tempLocation/load/load_datasave"
Sat Aug 30 07:09:05 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:05 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:05 CEST 2008 MaxDB sdbinst:      Installation of MaxDB Software
Sat Aug 30 07:09:05 CEST 2008 MaxDB sdbinst:      *******************************
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst: starting installation Sa, Aug 30, 2008 at 07:09:04
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst: operating system: Windows I386 NT 5.1 Service Pack 3
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst: callers working directory: D:/NWSetup/SAPNW7.0ABAPTrialSP12/image
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst: installer directory: C:/sapdb/NSP/_tempLocation
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst: archive directory: C:/sapdb/NSP/_tempLocation
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:06 CEST 2008 MaxDB sdbinst:
Sat Aug 30 07:09:09 CEST 2008 MaxDB sdbinst: One or more validation errors occured:
Sat Aug 30 07:09:09 CEST 2008 MaxDB sdbinst: PARAMETER     ERRORMESSAGE
Sat Aug 30 07:09:10 CEST 2008 MaxDB sdbinst: =========     ============
Sat Aug 30 07:09:10 CEST 2008 MaxDB sdbinst: DBNAME     Instance already exists
Sat Aug 30 07:09:10 CEST 2008 MaxDB sdbinst: Database NSP must not exist
Sat Aug 30 07:09:10 CEST 2008 MaxDB sdbinst: installation exited abnormally at Sa, Aug 30, 2008 at 07:09:09
Sat Aug 30 07:09:10 CEST 2008 MaxDB: Error during call to sdbinst, rc= 1
Sat Aug 30 07:09:10 CEST 2008 MaxDB: Done with call_sdbinst
Sat Aug 30 07:09:10 CEST 2008 MaxDB: rc of sdbinst = 1
Sat Aug 30 07:09:10 CEST 2008 MaxDB: Start of CallSdbuninst
Sat Aug 30 07:09:10 CEST 2008 MaxDB: No IndepProgPath. Nothing to do.
Thanks
matt

Matthew,
have a look at this post:
MAXDB error during instal
I guess nearly the some problem, isn't it?
Klaus Kellers' replay:
You could try the following:
1) If exists, remove the folder <DRIVE>:Program FilesCommon FilesInstallShieldUniversalSAP and all sub-folders
2) Check your registry as described in How to delete Registry Key SAP_DBTech
Hope this helps,
Regards
K.Utech

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

11g Install Failure, Listener Error.

11g Install Failure, Listener.
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
The box is at present not networked and as is not on a domain. The computer name is homedb.
I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
Enterprise manager configuration failed due to the following error -
Listener is not up. Start the listener and run EM configuration again.
Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
When I click ok on the error message the install completes as normal.
I can TNSPING orcl which results in the following:
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
008 12:36:33
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)
I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
sqlplus sys@orcl and typing in the password I get the following error:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
This is also the error I get when using sql developer to connect to the db.
The extract from the log file mentioned above is as follows:
20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
My listener, tnsnames and sqlnet are as follows:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
sqlnet.ora:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
tnsnames.ora:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
Running the command: lsnrctl service, results in the following:
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully.
Running lsnrctl status results in the following:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 20-JAN-2008 12:09:10
Uptime 0 days 0 hr. 40 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
ra
Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
The listener supports no services
The command completed successfully
I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
All firewalls and anti virus software have been disabled for the purposes of this install.
Do I need to manually register the listener with the database, if so how do I go about doing this?
I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

To answer my own question I fixed this by issuing the command
netsh winsocks reset
Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
Hope that helps,
Adam

INF Install failure for Windows 7

While tring to do Disc Cleanup I continue to get this error:
Error unregistering the OCS C:Windows\system32\20-20Technologies\3D Viewer\v5.0.94.0\2020Player_WEB_5_0_94_o.dllINF Install failure. Reason: Access is denied
I am using Windows 7 32 bit system. I cannot find anyone else with Windows 7 having this issue. Below are some of the thinkgs I have tried, but did not work. Any suggestions would be appreciated.
After click on start, run, open, msiexec/unreg I get this message (Windows cannot find 'msiexec/unreg'. )
I typed services.msc in the run box to see if Windows Installer is disabled. (If it is set it to manual). Mine is set for manual.
I tried downloading and installing this: support.microsoft.com/kb94228
Downloaded Windows Installer 4.5: go.microsoft.com/fwlink/?LinkId=120486
Got error: The requested operation requires elevation
I am at a complete lose to get this taken care of. Please help!!!

I was surfing the 'inter-web' on this issue [grin]
On the Major Geeks forum it said that COMBO Fix was the solution..
[quote]
Step
3:
Now we
need to use ComboFix to remove a bunch of malware files.
Make sure that combofix.exe that you downloaded while doing the READ &
RUN ME is on your Desktop but Do not run it!
If it is not on your Desktop, the below will not work.
Open Notepad and copy/paste the text in the below quote box into it:
Quote:
KILLALL::
DirLook::
C:\WINDOWS\system32\20-20
Technologies
FileLook::
C:\WINDOWS\inf\2020Player.PNF
Folder::
c:\windows\system32\512686
[Quote]
hth
pvm
PVM

Different Mac (PPC) OS X install failure

I seem to be having a different install failure for Flash
Player 9 on a Mac (PPC) OS X.
I tried all of the various solutions listed for other Player
9 failures with no luck (permissions, uninstalls, etc...)
When I run the installer it stalls out with 4 items left to
install while trying to search the hard drive. I even left it
running all night one night to see if it was just searching the
drive slowly. The installer isn't crashing as I can stop the
install by hitting the stop button.
One thing of note, is that I've had a few times (not all
times) when I cancel the install that the Flash Player will work in
the browser (I'm using Safari 3.0), however when the browser is
closed and reopened, Flash Player appears to not be installed. So,
I'm assuming in the act of canceling the install, there is some
form of a partial install that actually allows Flash Player to work
temporarily.
Anybody have ideas on this issue?
Mike
Flash Player 9 (both PPC installer & Universal Binary
Installer)
PowerBook G4 OS 10.4.10
Safari 3.03

Well after doing some additional playing, I discovered a fix.
I opened FireFox and installed Flash Player from within
Firefox instead of Safari.
Safari began to work immediately. Solution has held even
after restart.
Mike

DSC Extension install failure

Hello,
I am seeing this DSC install failure in the log when I call the Set-AzureVMDscExtension during a create vm call. This issue is not occurring all the time, seems to be intermittent. Digging some more I found the WMF 5 install is happening before the DSC extension
and looks like there is a 5 minute retry for the WMF install to complete. If the install takes more than 5 minutes the code flow does not write the install-completed.dsc file to the DSCWork folder.
In order to test this hypothesis, I ran the install.cmd and enable.cmd manually after the saw this install failure, and at that point I see the install-rebootneeded.dsc file being generated in the DSCWork folder and the machine is restarted and the DSC execution
continues after the machine reboot and everything works as expected. If I am right with my hypothesis on the problem, how can I increase the retry limit for the WMF install to more than 5 minutes? I saw another thread which attributes the same failure to securing
PSCredentials object when calling the DSC install. At this point, I would like to know how other people in the forum got past this issue, This is really blocking my install workflow right now. Appreciate any inputs!
Execution Error:
C:\Packages\Plugins\Microsoft.Powershell.DSC\1.5.0.0\bin\enable.ps1 : Error enabling the DSC Extension: The DSC Extension was
not installed correctly, please check the logs on the VM.
At C:\Packages\Plugins\Microsoft.Powershell.DSC\1.5.0.0\bin\pre-enable.ps1:51 char:5
+     & $scriptRoot\enable.ps1 -Verbose
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Write-Error], WriteErrorException
    + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,enable.ps1

Hi,
Thanks for your question. Based on my experience, there is no direct way to change the retry time limitation for installing WMF. Maybe some scripts would achieve that.
Besides, can you install DSC in Azure preview portal instead of running Azure PowerShell cmdlets? You can upload and install the script in Azure Preview portal for the VM to see if the issue persists. More information, you can refer to the link below:
Manage the PowerShell DSC Extension in the Azure Preview Portal
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

Did Apple fix the video quality issue in iMovie '09?

I am a casual video editor and iMovie 08 had the perfect user experience / functionality for what I want to do.
However, the known video quality issue (throwing away interlaced scan lines) made the result unacceptable since I archive our family video on DVDs. I have been forced to use iMovie HD for that reason. I have tried tricks such as converting the original DV files to AIF and deinterlace prior to import into iMovie08 but that did not seem to work either.
So does anyone know if Apple fixed the video quality issue in iMovie '09.
MESSAGE TO APPLE IF YOU ARE LISTENING:
Please fix the video quality in iMovie09 if not already. Yes, the quality is ok for YouTube or Internet video but for those of us who want simple editing to archive our family video we cannot accept poor video quality. Dropping an interlace field effectively halves the vertical resolution. Thank you.

Please explain this in more detail when you say Adaptive Deinterlacer. Are you talking about another program? If so, what program and what are the specific steps.
Also, sounds like you are recommending imovie09. By saying to do the above, are you saying imovie09 still causes you too loose significant quality like imovie08? Are you saying you can use imovie08 or imovie09 with these steps to get high quality video or just imovie09? I guess I just need more specifics on how you do what you are describing and how imovie09 fits into this versus imovie08. I joined this whole discussion trying to figure out if upgrading imovie09 made a difference regarding the whole quality issue. I know it has more features, but I am more concerned about he quality of the video right now. Thanks.

Will BB fix most of these "issues"

Hi all,
I am new to BB with the Z10. I really want to keep this device. I really like the simplicity of the phone as a productivity device. I have had Android and they work well, but I don't really care for all the other "**bleep**" they seem to have on them. I use my cell phone mostly as a phone believe it or not.
But I am disappointed with a few things like the contact list duplicating and even up to quadrupling some contacts. No real way to speed dial more than a few entries. The gmail only keeping a limited time frame of older emails.
I have been reading threads and looking for solutions on this board and others with some discouraging results. Will BB fix most of these "issues" and others that this community is posting about? I have about 5day's left before I need to make a decision to send the phone back or not.
To the group, what say you?
Regards, RicK T.

BlackBerry is working on the gmail duplicate contacts fix.
See more here: Duplicate Gmail Contacts appear on the BlackBerry Z10 smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ZCM Reporting install failure: Wrong OS

Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
Tim Wessels
Originally Posted by Craig Wilson
At this point in time, BOE is only supported on a 32-Bit OS.
Novell is working with Business Objects to get support for 64-Bit Platforms.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"deban0" <[email protected]> wrote in message
news:[email protected]...
>
> Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
> server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
> 10.1.1 x64. But I got the install message: Not supported OS. Is it true
> ?
>
>
> --
> deban0
> ------------------------------------------------------------------------
> deban0's Profile: NOVELL FORUMS - View Profile: deban0
> View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
>

FIXED! Another install failure issue

Similar Messages

Maybe you are looking for