Fixed asset import failed for 1 asset but why?

Hi Experts!
1 assets wasnt imported to SAP, but no idea why.
The asset was bought on 2007.01.08, the import regards to 2009, so only 1 month is to be depreciated.
This is the log file:
Life Parameter: 1000123;Z0001;szoftverlicenc;155;2007-01-08;;;;LK100;;;;2080000;0;2080000;100;2007-01-08;24;1;LINHU;2060052;;;;;;;;200;2007-01-08;24;1;LINHU;2060052;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Any idea what to do with it?
Thank you in advance!!

Only this item wasnt imported.
The last depreciation of this item is in the same month as the import regards, maybe this cause it?
But then what to write into the remaining deprecitation run..

Similar Messages

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

"Import Failed" message uploading video - Why?!?

I have Adobe INDESIGN CS5 which has new interactive settings which allow you to import a video in the document. According to Adobe: "You can import video files in Flash Video format (.FLV and .F4V), H.264-encoded files (such as MP4), and SWF files. You can import audio files in MP3 format. Media file types such as QuickTime (.MOV), AVI, and MPEG are supported in exported interactive PDF files but not in exported SWF or FLA files."
I have tried importing a video in both .FLV and .AVI formats. Every time I get an "import failed" message and nothing happens. Please help! What am I doing wrong?

Hi
I'm also using Handbrake, but I have to manually change the m4v extension to mp4.
After that, InDesign imports the video with no problem.
Hope this helps
Enrique Londaits
[email protected]
www.solucionesdvd.com.ar
Zapiola 1781 6º piso
Buenos Aires - Argentina
4551-4331

Fixed Asset Import fails

HI All,
I am getting the below error message when I import a fixed asset master data.
'' Import End; Number of imported asset: 0; Number of processed
assets: 0; Error: 1".
I have gone through SAP note 876670 which explains about this sort of errors and corrected the date format but still no luck. Can someone tell me if somethingelse need to be checked ?
Await your respnse
Thanks
Johnson

Hi Johnson,
You may check more threads here for example:
How to import Fixed Asset Master File
Fixed Assets Transaction: Transfer => Error
Check your import data carefully, one comma difference would result great difference.
Thanks,
Gordon

AVI import fails for older files but works in iMovie

I have two sets of AVI files, one from early 2000 and newer post 2008.
Both groups of files import fine into iMovie 11.
however, only the newer group imports into FCP X.
I can convert the older files to MOV using QT, but this won't work well for many files.
Seems if iMovie can read, so should FCP X.

I have had a similar problem, where maye 8 out of 10 AVI format moves will download into iPhoto, but the rest simply never get there. I did get 107 out of 109 files OK but have seen worse. I can tell you about which camera it is, how I connect and so on, but first, this:
A small sidebar in the Bugs & Fixes column of the April, 2007 Macworld magazine (see page 89) mentions that: "the likely cause is a problematic third-party QuickTime Plug-in." and advises the reader to check for and remove plug-ins not installed by OSX.
I took the same camera and imported all 109 pics from my camera on a separate account of the same machine (20" i-mac but I don't think this is relevant) and got all 109 f 109 files just fine.
So, I think "problematic third party QT plug-ins may be a good call. Need to investigate this some more, but its a flaky problem and Macs are supposed to "just plain work".

Import Process for Assets

Hi ,
Could u pls let me know the steps to procure Imported assets where I want to claim Cenvat on CVD / ECESS on CVD.What accounting enteries will get generated at each step.
Is it mandatory to make Line item in PO as NON VALUATED to claim duties under CENVAT ?
Regards
Shrey

thx

Import fails for movies on Intel Macbook

Importing with iPhoto on my MacBook fails on the first movie it encounters every time.
The movies are 30 second AVI files from a Canon Ixus v3 connected via USB. The import will show no progress for about 5 minutes and then apparently time out. It returns to the iPhoto library and neither the movie nor subsequent content are there.
The same combination of camera, cable, photos & movies works perfectly on other computers, a 17" 1GHz Powerbook and and a 17" 1GHz iMac.
The same CF Flash card, photos & movies work fine on the MacBook using a CF-USB card reader.
Using Image Capture on the MacBook instead iPhoto worked once but every other time it has behaved just like iPhoto. It times out and fails to import that first movie or any subsequent content.
I created a new user on the MacBook and tried importing with iPhoto in there and the same failure occured.
I reset the PRAM and tried again to no avail.
I worked through all this with the AppleCare phone support with no success. The support person consulted senior technicians for a couple of minutes and came back to me with their opinion - that it is probably an incompatibility betwen iPhoto, the Intel Mac and the Canon Ixus v3 ie. the specific combination of those three things.
They suggest that it's not a USB issue because iPhoto imports perfectly using the CF-USB card reader. They believe it's not an iPhoto software installation issue for the same reason. It's not a preferences issue because it also failed with a new user and the PRAM reset didn't help.
They apologized for not finding a solution for me and could only offer the workaround of using the CF card reader. That's not such a bad work around but I'd still like to persist if anyone can suggest any further troubleshooting or possible solutions. I'd also like to see "me too" posts from anyone who has had the same issue.

I have had a similar problem, where maye 8 out of 10 AVI format moves will download into iPhoto, but the rest simply never get there. I did get 107 out of 109 files OK but have seen worse. I can tell you about which camera it is, how I connect and so on, but first, this:
A small sidebar in the Bugs & Fixes column of the April, 2007 Macworld magazine (see page 89) mentions that: "the likely cause is a problematic third-party QuickTime Plug-in." and advises the reader to check for and remove plug-ins not installed by OSX.
I took the same camera and imported all 109 pics from my camera on a separate account of the same machine (20" i-mac but I don't think this is relevant) and got all 109 f 109 files just fine.
So, I think "problematic third party QT plug-ins may be a good call. Need to investigate this some more, but its a flaky problem and Macs are supposed to "just plain work".

How do i fix sound font fail for audigy 2

all of the suddon my sound stopped working and my diagnostics say sound font fail. how do i fix this problem?

I had the exact same problem updating the drivers for my Audigy 2 Platinum EX, but I think I managed to solve the problem. This was quite awhile ago, but I think I remember how I got it to work.
First of all, which update did you download? The "Digital Rights Management" driver update was the one giving me that problem, and this was after installing the main drivers and programs from my Audigy 2 CD. But, I think the reason why it gives this message is because you need to install one of the other driver updates first, then install this DRM update. Look under the driver details and it says the following:
"<EM>Requirements</EM>:
Microsoft? Windows? XP Service Pack 2 or Windows 2000 Service Pack 4 </LI>
Creative Sound Blaster Audigy 2 or Audigy 2 ZS series internal audio device </LI>
<EM>EAX 4.0 ADVANCED HD Driver Patch Update for Sound Blaster Audigy 2 and Audigy 2 ZS (released on 29 March, 2004) installed, or Sound Blaster Audigy 2 and Audigy 2 ZS Driver Update (released on 29 July, 2004) installed</EM>."</LI>
Strangely enough, it appears this update requires you install an older driver update first (EAX4DRV_AUDIGY2__84_50.exe) then afterwards try running the Digital Rights Management update.
I think this is right, but I'm not 00% sure.

Model Bean Importer fails for superclasses?

Hello,
I am trying to import a bean model into webdynpro. The top class of my structured bean model fails to import if it extends a superclass. I tried different ways, even with a very simple base superclass but keep failing to import.
Instead, bean classes that implemet interfaces get imported properly in the model and interfaces are automatically imported.
Is there anybody that can give advice? I need my bean model to extend a superclass since I want to "hide" out some internal methods from the pure bean model and write them only once in the base superclass.
I am on DeveloperStudio SP13
Regards

Hello Valery,
I solved by myself after some more attempts. The problem in generating the model from a javabean appears if the bean class contains references to other custom classes that are not visible by the model wizard, no matter if you add them to the webdynpro project as project references or java build path libs, they are stil not considered by the wizard. So I worked out to build the model from a jar (located in another project) that contains all classes.
My case:
Class R located in a deployable library project.
Class R is referenced in webdynpro project
BeanSuperClass A internally uses Class R
BeanClass B extends A
Wizard fails generating model for either A or B.
The pitty is that the model wizard does tell why it fails. It would be grate and much simpler if the model wizard could take into consideration the build path of the project where the model is being generated so that we can keep bean classes properly separated from other general purpose stuff.
BTW Thanks for the hint and regards,
Vitaliano

I keep getting a popup window saying there is an important update for FireFox but when I click on "More information about this update" it doesn't show anything. It seems suspicious so I have not downloaded or installed it.

Any thoughts...?? Anyone have this issue and have an answer to it...???

There is a security update for Firefox (Firefox 10.0.2) which you should apply. Unfortunately, it looks as if the updater on your Firefox is messing up somehow.
The easiest way to work around this and get you secure is to go to [http://www.getfirefox.com www.getfirefox.com], and download the latest version of Firefox there. After it downloads, go ahead and run the installer over your current Firefox. None of your settings will be changed, but it will apply the security fix, and you will be all good to go!

Fixed header working fine for desktop but not for windows phone

I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
.header{
z-index: 3001;
position:fixed;
top:0px;left:0px;
background-color: white;
width:100%;height:150px;
This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
not visible but they are working if u manage to click at the exact place. Any fix for this?
I want to add that this problem is coming only in windows phone. So need fix for that.

Hi User1508372,
The
Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
Windows 8).
The folks in the
Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
--Rob

Import Failed for Global Schema

Hi,
I am trying to create GLOBAL schema for demonstration, The script is executing fine but there is no data available in the tables and no objects are created in the cube. Please advice.
Venkat :-)

Hi,
I had I a problem loading data with SQL Loader (date format in text files containing data for dimension tables is localized in english). Did you examine SQL Loader logs?
Simon

Iphone 5 power button not working!! They have replacement program for months but why they dont email you and say it??

I have had iphone 5 and have never been happy and i think apple is not leading the technology and future of market anymore as they are lowering quality of their products(even hardware). I had to change first iphone 5 i had because of wireless issues and then i had battery problem and had to charge 3 times a day and finally after 2 years i bought they decided that its faulty and they decide to change it. Luckily enough i read it on an online tech magazine and after googling i see that they have had replacement for power button as well which i am eligible for as well!! i go to genius bar and they replace battery but they dont replace power button cause they examine it and passes till the audio dock test! It connects to charder dock or cable but it doest to audio test dock and he says one off the pins inside is not right but it charges perfectly with every cable in the store!! And i tell him that they have to change power button not the charging pin cause it doesnt make sense!! Its a faulty product and maybe if they emailed and said it nearly a year ago my pin was right then!! so i think they found a silly reason not to change it and so i am struggling with that phone and brand that i hate(once i used to love)!

ahmetfromlondon63 wrote
And I don't know what these guys are talking about? I have an unsolved hardware issue and I posted here!
This is a user-to-user technical support forum. This is not AppleCare. You are not addressing Apple here. No one here can help you resolve your customer service issue with Apple. Use the Contact Us link at the bottom right of every page for information on how to contact Apple directly. When you talk to them, I'd suggest not using profanity. It makes people less likely to help you.

Connection to the server failed for email, but internet access is fine.

My iPad 2 worked fine yesterday and today I cannot get mail. The message says connection to the server failed or all of my email accounts. Internet access is fine.

Try again with the e mail. The message means you messed up the settings. Google you ISP and e mail settings. They will tell you the server name for incoming and outgoing. They will be different. Pay attention to port number and be careful to make sure you enter the password right. Since the rest of the internet works, your problem is just with the security on your ISP.

Purchase Requisition Import failing for Dropship orders

Hi,
EBS - 115.10
When dropship order is booked, data is populated into po_requisitions table...After running the import error message says 'Invalid Deliver To Location'.
Which is basically populated from LOCATION_ID of SHIP_TO Site.
DESTINATION_ORGANIATION_ID is populated as Inventory Org
DELIVER_TO_LOCATION_ID IS populated as LOCATION_ID of SHIP_TO Site.
So anything wrong in this. If yes, what needs to be changed?...Please suggest

Can you check if it is 'internal location_code' of that inventory instead of customer site location ?
Location_code is from hr_locations, location is from hz_locations.

Fixed asset import failed for 1 asset but why?

Similar Messages

Maybe you are looking for