Fixed Asset there are 2 activities with the same name.

Hi,
I have a question about 2 transaction in ORFA transaction.
There are 2 activities with the same name, I don't know If I chose the first or the second activity for customizing Revaluation Areas.

Hi,
This are two different options for revaluation.
Based on your country requirement this could be either.
Do you have a conutry specific documentation available that could answer this or did you check SAP OSS for further information?
Hein

Similar Messages

  • HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

    the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message   thank you!!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Are drives with the same name differentiated?

    I'm running OSX 10.6.8 and three external drives on which data is stored (a main drive, A-Data, and two backups). A friend may decide to help me with a project and to do so will have to have the same setup. Naming the drives on the second system is of some concern to me, so I did some research.
    The fellow at http://www.cnet.com/au/news/drives-in-os-x-appearing-with-1-appended-to-their-na mes/ states:
    If by chance you mount two drives of the same name, because the system can't create two mount points with the same name it appends sequential numbers to new mount points as they are created, and therefore you will see the numbered drive names in the Finder.
    Unless I misunderstand what he is talking about, I found that I can have two drives with the same name. I can have two drives named A-Data on my desktop. And therein lies my problem (maybe). The project involves Premiere and several of it's sister programs, all of which require external files (video, audio, stills) to be linked, not stored within the working file.
    QUES 1
    Are disks with the same name distinguishable by OSX or software?
    QUES 2
    Assume that
    I am working on a project which is saved on A-Data (and all the project links are to files on that particular A-Data)
    I then connect another disk with the same name (and with the same folder structure), and backup my files to it.
    I then eject the first A-Data and open the project on the second A-Data.
    Will the software say that it can't find the linked files (because they are on the ejected disk), or will the project open as normal?

    Avoid having the same names if at all possible, especially if you use apps that 'link' to the media via the file path.
    The file path is set by the order in which the disks mount, which can change across reboots.
    To see what is going on by using Disk Utility…
    Select the first volume, look at the mount point (a blue link at the bottom of the Window) …
    /Volumes/A-Data
    Now connect the second volume & select it, look at the mount point…
    /Volumes/A-Data 1
    Now reboot, power off the first disk, leave the second one on & power disk one back on when the OS has competed booting. They will show the same paths, but each disk is now the 'other' disk - this makes a big mess for Apps like Premiere.
    The only way to make this work is to clone every file to be identical on both disks, and never use Premiere (or any app that links to media) when both disks are connected. Otherwise you risk linking to media files on 'A-Data' and 'A-Data 1'.
    Premiere must have tools for sharing projects - look at them before using disk names in this way.
    You could however clone 'disk 1' to 'disk 2' & then rename it on the second Mac (to make them identical to fix the paths for Premiere), just avoid bringing them to one Mac with the same disk names. It does make more headaches in future though, because your friend will add new media that you need to migrate back to your disk.

  • Are libraries with the same name a problem?

    In previous versions of FCPX, having the same event on two drives was a real problem.  I had backup drives that mirrored my media drive, and if I started FCPX before closing the backup drives, FCPX would warn me about the same event being present on more than one drive and potential corruption (the same may have been true of projects, too).
    In 10.1, you can easily copy libraries to different drives in Finder.  But then both libraries have the same name.  Is that a problem like it was in earlier versions of FCPX (with events)?  Is there a potential corruption issue?
    I've started renaming the libraries from with FCPX after I copy them (so, for example, I have "Day the Beach" and "Day at the Beach Backup."  I don't know if that's advisable or necessary, or even if I need to do the renaming from with FCPX rather than Finder.
    Any advice is appreciated.  Thanks!

    A Library is completely self contained and should not pose any problem.
    However placing a Backup ID makes good house keeping sense to me.
    Al

  • New Nikon and keeping old - are files with the same names allowed?

    I have been using the organizer catalog for all my photos for years.  When my wife got interested in photography I bought her a Nikon and added her photos into the same catalog - most of the tags overlapped since the pictures are mostly of family and around town.  This worked out fine since I used a Canon and the file names were different
    Recently I looked for a new camera (its been years and I wanted to move up).  Thinking that it made sense to share accessories and lenses I got myself a new Nikon - a different model than my wife has if that matters.  (No Nikon -Canon discussion please).  Of course now all the pictures that I take are named in the camera and have exactly the same names as my wife's pictures already in the Organizer catalog.
    I haven't tried to import my pictures yet, but I seem to remember that the Organizer catalog won't import a "duplicate" picture even if its in a different folder on the hard drive.  So the question is, how does Organizer know whether a picture is a duplicate or not?  If it looks for filenames then it won't import my pictures (or worse, it will import my pictures and will "overwrite" my wife's - not on the hard drive in a different folder, but in the catalog - or just mess up all the tags etc.).
    The only thing I can think of is to download my pictures directly to the hard drive and batch rename them in Irfanview (like add my camera model to the front of the filename) and then import these renamed pictures to the catalog.  This adds a few steps to the workflow over just using the Adobe Importer and allows more opportunity for me to mess things up if i'm not concentrating as I do all these steps, so its something I would like to avoid.
    What do all you professional photographers with more than one camera do about this.  Should I just start a separate catalog - although the beauty of the PSE catalog is that I can locate all of the pictures I want with just a few clicks of the mouse without looking in more than one place.  Extra info - I'm using PSE 5.0.2 on Vista 32.
    Thank you for reading this far.  All suggestions will be much appreciated.
    Blaine

    PSE is smart enough to know that a file in a different directory with a different capture date and time is not the same as the photo you already imported. No need to rename beforehand.

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • HT1473 Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Sometimes when I copy a CD into iTunes all of the songs do not show y up in one album, but mutiple albums, all with the same name. Is there an easy way to get all of the songs into one album.

    Generally adding a common album artist will fix things.
    tt2

  • When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists.  How can I fix this problem?

    When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists."  The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same.  How can I fix this problem?
    Thanks
    Candy777

    HT2500 Error when deleting email: Apple Support Communities

  • The file .docx cannot be opened because there are problems with the contents in sharepoint document library

    I created a site and  created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
    in it .
    As per my requirement I am saving the above site as site template .
    After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
    The problem is I am getting error while opening the word document
    Error - The file filename.docx cannot be opened because there are problems with the contents .
    Details - No error details availble .
    Indresh

    What are you doing within the txt document?  Is it general text and string based items, or have you something more elaborate going on?
    An older discussion here elaborates a bit more on the dotx vs docx side of things.
    http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Create a dir if there exists a file with the same name

    Hi..
    I want to create a directory with file.mkdir(). But I recognize a problem when there is allready a File with the same name.
    Is there any solution to handle a dir and a file with the same name?
    eg: Dir "C:\Windows" and File "C:\Windows"
    wami

    This explains it... use "java Test2 asdsfd" for example. While this example doesn't show it,
    if you try to create a dir with another slash on it c:\blah\ , it still can't be done.
    import java.io.*;
    public class Test2
    public static void main (String args[]) throws Exception
         if (args.length < 1){
         System.out.println("Test2 [name]");
         System.out.println("creating bogus file " +args[0]);
         FileOutputStream fo = new FileOutputStream(args[0]);
         fo.write(55);
         fo.write(55);
         fo.write(55);
         fo.close();
         File x = new File(args[0]);
         if (x.mkdir()) System.out.println("made dir " + args[0]);
         else System.out.println("failed to make dir " + args[0]);
         System.out.println("deleting file " + args[0]);
         x.delete();
         if (x.mkdir()) System.out.println("made dir " + args[0]);
         else System.out.println("failed to make dir " + args[0] + " again !");
    }

  • Is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

    is there any option to recover a file we saved with the same name that other by mistake in a MAC PC

    There's a slim chance. +*Stop using the drive IMMEDIATELY.+*
    Then see: [Data Recovery|http://web.me.com/pondini/AppleTips/Recover.html].

  • Cannot open Word File because "there are problems with the contents"

    Hi Everyone,
    I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2.  Please help as I need this doc for work meeting this morning.  Nothing special about this doc but links were copied into it???  However I do that all the time.  I have never had this happen before.  I am on a 2010 machine.  I just ran a disk permissions repaired and emptied the trash but still no dice.  I had several other word docs up as well when I got up this morning but they are all fine.  I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
    Thank you,
    sb

    Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor?  Not sure what happened here but hope it doesn't happen again?

  • HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

    HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

    Have a look here:
    http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
    (Like any website owner, I may (or may not) derive compensation from my website)

  • What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    What's the best cover for the new iPad (3rd generation).  I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

    The best cover is the one that suites your needs. Try Google. There are dozens on the market.
    As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

Maybe you are looking for