Fixed Assets move from location

Hi SAP Experts,
Business wants to capture all the costs into creating an asset as Asset Under Construction and then at completion wants to settle it to an Asset at a certain location. I would like to know if this Asset can be moved from its primary location to another location without effecting its Depreciation. If the answer is yes, then I also want to know how this can be done.
Your quick response will be highly appreciated and rewarded with points.
thanks to All !

Hi Sameer,
The best solution for this is to use the Investment Measure for the Internal Orders. What it does is, you need to create an Investment Profile in which you will give the defaut Asset class (AUC). When you create an Internal order and release it in the back ground an AUC asset is created. In the Internal oder in the settlement rule give the main asset number to which you want this AUC asset to be settled.
All the costs incurred for this AUC is stored in the Internal Order and by doing KO88, Automatic Settlement you will be transferring all the values in the IO to the AUC asset (By default the IO value can be settled only to this AUC asset created) and when you do Complete settlement (KO88), the value in the AUC asset gets transferred to the Main Asset maintained in the Settlement Rule.
Hope this will clear your doubt.
Regards
Sridhar

Similar Messages

Asset Transfers from location to another

Dear Friends
Is there any posibility of raising a note in FICO of asset transfers from one location to another location This is only asset quantiy transfers but not the values)
Thanks
Harikishan.

Hi
The information required by you is not clear. Is is a change of assignment of the asset,say from one cost center to another, one plant to another.?
Regards
Sanil Bhandari

Adding an already depreciated asset in Fixed Assets module from a manual sy

Guys can someone help me how i can be able to show depreciation for assets that have already depreciated in a manual system.
When am adding assets in the EBS FA module, the module is considering the assets as new and the prorate is depreciating the assets after 6 months as an accounting principle offcourse this is true for new assets.
But in my case the assets are old in my organization, I would like to enter the accumulated depreciation for these assets and there original cost.
Please help me to convince my managers as am the one who recommended for the Oracle EBS Project in my organization.

Hi,
i have posted a fourm with user534587 adding a parameter to existing report in GL module
does any one please help me in this issue its very urgent my client is asking for this report.
i will be very thankful to you .
Regards,
Azeez.
[email protected]

How to fix my move from MobileMe to iCloud?

I tried to synch up my devices to iCloud, but it didn't work properly. It seems that I entered my Apple ID instead of my MobileMe address, and I only have Snow Leopard on my Mac, and not Lion. The iPad has the contacts correct, but it didn't import the calendar. The iPhone now has 3 duplicate entries for each name. My up-to-date info is on my Mac, that has Snow Leopard, and not Lion. My MobileMe account thinks I have sucessfully moved to iCloud, so I don't know if I can still synch up my calendar and contacts between my Mac and my iPhone. Ths is the most critical piece I need. How can I fix this?? Any help would be appreciated.

I suspect you have two main Mail windows open. This might seem like you have two Mail.apps open.
If you click on the red close button, does the window close?
Quit Mail.
Open Mail.
Does it open in two windows again? If yes, it could be a corrupt plist file.
For example, if I select New Viewer Window.
The result would be two windows open. Mine also includes Preferences window open to Accounts.
i usually never get anything solved by writing here but when you spend a few thousand, one expects the product to work and for customer support to be intelligent and able to actually do their job. so i hope i can find a solution to this.... someone... anyone?
This is a community discussion forum. We are all users here just like you. We do not get paid to answer your questions. See this link for Apple support:
http://www.apple.com/contact/

Upgrade Fixed Assets from 10.7 SC to 11i

I would to gain some knowledge from anyone who has been through a Fixed Assets Upgrade from 10.7 SC to 11i. In particular, I need to understand the steps involved, estimate for the total task, lesson learnt, any technical issues, any relevant training that may be useful and any advice for this task. Thanks in advance.

We have completed our first upgrade of FA from 10.7 SC to 11i. Most issues arose from the introduction of WorkFlow for Account Generator. In addition we have had difficulty activating the "security by book" new feature. This is still under investigation. We upgraded PO, AP, FA and GL. I can say that more than half of our time has been spent resolving FA issues.
The length of time the task will take will depend on which functionality you use. Have you seen the upgrade kit on metalink? it has all the upgrade steps. From that you could determine how many steps you need to perform.
Hope this helps.
null

Cannot find Fixed Asset Log file

I am trying to upload fixed assets with the fixed asset template. I am getting errors. I see on the forum that there is a fixed asset log file, but I cannot find it.
1) Is the log file on my computer or on the server?
2) What is the location of the log file?
Regards,
Fred

Gordon,
I checked the directory where I uploaded the fixed asset file from and there was no log file.
Regards,
Wayne

Fixed Asset Data Migration Wizard

Hi All,
I tried to use Fixed Asset Data Migration Wizard to migration my fixed asset data from 8.82 to 9 in the development server. The server only accessible by myself.
When I start the migration run, system prompt me " To Continue with the fixed asset data migration, you must be the only user logged on to this company data".
In fact I'm the only user in the company data and system not allow me to execute the migration.
What are the causes that system recognise there is another user in the system?
Please advise.
Thanks in advance.
Best Regards,
Foong Yee

Hi,
If you're using SQL Server, try Detach (close existing connections) and re-Attach the database again then re-login and try executing again the wizard.
Regards,
Donald

Fixed Asset: market value

Hi All!
Due to IAS we must post an special provision:
when the inmaterial fixed asset value market is minor than fixed asset net value we have to post a provision by depreciation (in order to reflect the possible loss when we sale it)
This provision does not affect the fixed asset countable net value. So that provision don't have post in 01 depreciation area. But:
1- when we sell the assets the provision must appear in the sale affecting to the benefit or loss.
2- I need to know the provision for each fixed assets. That's why we need SAP shows its in FI-AA area.
With the transactions under Manual Value Correction folder (fixed asset menu) the fixed asset net value is modified.
We've tried to implement a second area doesnt affect to fixed
asset values from the 01 depreciation area and vice verse to post there this provision. But The system doesnt allow that (message error number AC528)
Do have more ideas?
Thank You in advance

Hi Vijay, thank you for your answer but...
It seems that Transferred Reserves is used to sell a fixed asset and transfer the benefit to other asset (If I've undertood right)
I put an exemple to fix the question:
I adquiered a fixed asset by 1.000 euros (a building) in 2005
- Deprecation key: LIND (Str.-line) / Use Life: 10 years
In 2007 my building on second hand house market is valuated in 500 euros (minor than fixed asset countable net value 800 euros).
So I must post a provision by depreciation by 300 euros. That post does'nt affect to fixed asset countable net value (is just a provision). My fixed asset countable net value is 800 euros.
In 2010 I sold my asset by 1.000 euros. My fixed asset countable net value is 500 euros. So my profit is 500 euros. Then I must to reverse the provision post in 2007 .
I need to post that provision related to fixed asset but without affect to asset net value, to reverse that in the asset sale.
Thank You very much
Francesc

How to get historical currency rate for second group currency transactions in Fixed Assets

Hello,
My client had MXN (Mexico Currency) as a legal currency and when the company code was implemented (went live) group currency was not implemented. After 3 years this company code implemented second local currency as USD and is now a USD functional Company. When Fixed assets movements such as depreciation, retirement etc are posted; the postings in local currency is fine but postings in group currency is not fine the reason is the exchange rate for group currency must be 'historical rate" but instead of that the entries are being posted in "current rate". To rectify this issue we need to set the exchange rate as the historical rate. Now my question is where/how can I get the historical rate (rate when asset was acquired/purchased). When the assets were acquired the amount was in MXN and there was no maintenance of USD exchange rate as there was no second local currency so then how can I get the historical exchange rate for USD. Most of the assets were acquired/purchased before 5-10 years then how can I find the USD exchange rate for those periods.
Thanks,
Rinki

It is necessary yo have a different rate type for average. The month-end rate type cannot be used.
The M-rate type is typically the month-end rate.

Partial retirement in fixed assets

Hi,
we are having one strange fixed asset problem.. today we have processed all the fixed assets transactions from january to may
2000.. we did a partial retirement of an asset in dec 2001.. like we had 4 units of it and we retired 1 becaz it was stolen..
the transaction worked in december everywhere (like in fixed assets, general ledger)..now in 2002 this transaction is there
in fixed assets but not showing in General ledger so our fixed asset is not matching with general ledger.. so can someone
suggest that where we did the mistake??? any help will be highly appreciated..please let me know if i'm not clear enough
becaz i'm new to oracle finance...
Thanks.
Sandeep

Hi Experts,
can anyone help me how can i identify what account i should be set-up in Account Determination of Fixed Asset
(Administration> Set-up> Fixed Asset> G/L Account Determination):
i am using SAP BUSINESS ONE 2007 A (8.00.181) SP:00 PL:47
1) Retirement: Net Method
a.) Sales Revenue for Asset Sales Net
b.) Asset Retirement with Exp. Net
c.) Revenue for Asset Retirement Net
2) Retirement: Gross Method
a.) Leave with Expense Net Book Value
b.) Leave with Revenue Net Book Value
I can not run the Retirement of Assets because this part was not been set-up
and Please do sent me also the copy of PDF to my e-mail.. thanks..

Local Language for Banks and Fixed Assets

Hi,
Is it possible to maintain the below information in multiple languages(English as Primary). Any table names if possible.
1. Bank Name (P2P)
2. Bank Branch name (P2P)
3. Fixed Assets Description and Location (B2R)
4. Unit Of measure (MM)
Thanks and Rgds.,
srinivas

Hi Expert,
Please refer the below link, which will be helpful..
http://help.sap.com/saphelp_mdm550/helpdata/en/46/2b6316f2b54f07e10000000a114a6b/content.htm
http://help.sap.com/saphelp_mdm71/helpdata/en/40/8ee2b1223449f48ff7b6a6d35a2fd2/content.htm
Regards,
GK
SAP

G/L Movement Types for Fixed Assets

Dear All,
for the key figures displayed in report "Schedule of Fixed Assets" I need the corresponding G/L Movement Types. I found it for the posting types in attached screenshot already, but for the following key figures I would it need urgently for my customer:
- HIST_COSTS_START_OF
- TRANSFERS
- WRITE_UPS
- ACCUMULATED_DEPR
- VALUE_ADJUSTMENTS
- NETBOOKVALUE_END_OF
- NETBOOKVALUE_START_OF
The customer needs it for consolidation preparation
Thanks a lot and best regards!
Katrin Gruber

Hallo Katrin,
There is no easy way of matching the G/L movement types from your attachment to the key figures in the schedule of fixed assets.
The report Fixed Asset line items displays all fixed asset relevant postings for the selected criteria. I displayed in the report the G/L movement types (as displayed in the journal entry) and in addition the business transaction type.
In report "Schedule of Fixed Assets" you have a mixture of movement types
Total of Depreciation, which compares to G/L movement type 450
Acquisition Costs, which is is the sum of G/L movement type 400 (Business Transaction Type 647 + 643) and 400 (BTT: 641, but not 642)
In addition here balances are displayed, which do not relate to journal entries with movement types (e.g. Net Book Value at End of 004.2015).
Seeing this please understand, that mapping from key figures to movement types is not possible.
You have two options:
use data extraction for consolidation with movement types or
maybe extracting the data from the report with OData depending on your needs.
Best regards
Marlene
PS: I will provide a blog in the next days/weeks for the topic of consolidation.

Design Fixed Assets Star Schema from OLTP DB

Hi,
Scope : Design Fixed Assets logical Star Schema for Demonstrate with OLTP tables
Our platform is Oracle 10g Forms and Reports deployed on Oracle 10g App Server._ At the moment we don’t have data warehouse constructed. We are pumping OLTP Data into Staging DB thru jobs and then by using materialized views getting the data in DWH DB which is in progress.
OBIEE 10g installed and working fine for testing.
We are planning to implement OBIEE for Reporting. As a starting point I would like to design Fixed Assets star schema to demonstrate FA reports in OBIEE from OLTP Tables.
FA- OLTP Tables:_
AC_UNIT_MASTR           – Business Units
AC_ACNT_MASTR           - Nominal Codes
AC_COST_CENTR_MASTR      - Departments
AC_MANTN_ASTS           - Assets transaction table
AC_AST_BAL_DETLS           – Period wise Asset summary
AC_AST_BAL_DETLS_V      - View
To achieve this
1).Import tables in physical layer and set physical joins
2).identify and create dimensions and set complex joins and then move to presentation layer.
Please suggest best approach to design Repository
Thanks
Regards,
Kulkarni
Edited by: hai_shailesh on Jan 25, 2012 11:36 PM
Edited by: hai_shailesh on Jan 25, 2012 11:38 PM
Edited by: hai_shailesh on Jan 25, 2012 11:39 PM

Hi Saichand,
Thanks for the response.
Already i referred that doc and completed practically. now i have to work on Finance data . as a starting point working with Fixed Assets module. already i designed centralised fact with dimensions as below
in physical&BMM layer defined relationship as below()
AC_UNIT_MASTR_D                  --> AC_AST_BAL_DETLS_F
AC_ACNT_YEAR_MASTR_D        --> AC_AST_BAL_DETLS_F
AC_ACNT_PERD_MASTR_D        --> AC_AST_BAL_DETLS_F
AC_COST_CENTR_MASTR_D      --> AC_AST_BAL_DETLS_F
AC_AST_GRP_MASTR_D            --> AC_AST_BAL_DETLS_F
AC_AST_SUBGRP_MASTR_D      --> AC_AST_BAL_DETLS_F
and
AC_ACNT_YEAR_MASTR_D        --> AC_ACNT_PERD_MASTR_D
When iam trying to create a dimension for Periods(AC_ACNT_PERD_MASTR) , Periods dimesnion created with two tables
AC_ACNT_YEAR_MASTR_D,AC_ACNT_PERD_MASTR_D
Please advice..
Regards,
Kulkarni

Transfer Fixed Assets From Profit Center to Another

Dears,
I have transferred a fixed assets from location to another location. So that, I have to change the profit center for the transferred fixed assets.
I tried to do the following :
AS02 => Time dependent =>More Intervals => Add Intervals .
But the cost center is not able to be changed.
Please help...
Thanks

HI,
To trasfer an asset from one profit center to other profit center, create an asset in receiving profit center and run transaction ABUMN. System will retire asset from sending profit center and the value will be trasferred to receiving profit center.
You can also have second option for this, change cost center of asset by defining the validity for the same.
Hope this would help you.
Regards
Pankaj

I rented and downloaded two movies from iTunes via my iPad. They show up as purchased in items but won't play. They do not show up in iPad visor app at all. Any ideas on what happened and how to fix are welcome. Thanks

I rented two movies from iTunes using my iPad. They show us as purchased but will not run from there. I get a message saying I have 24hours to watch then it just goes back to iTunes. I looked in video app where they usually go and nothing is there. Any ideas for a fix are welcome?
Thanks

You did try tapping on one of them in that list in the iPod app! This has happened to me and I was able to start the movie from there. You could try restarting the iPad, go into the iPod app and try again.
Now I'm stumped unless it is a corrupt download. You did download right onto the iPad - correct? If you downloaded in iTunes, there is a Move tab or function that you have to select to transfer the movies to the iPad when you sync. They just don't sync over without selecting move.

Fixed Assets move from location

Similar Messages

Maybe you are looking for