Fixed background does'nt behave as before
Since Firefox > 17 the fixed background does'nt work as expected.
Please scroll down the page http://bukowina.info with FF 17 and with FF > 17.
(Safari works as expected)
Looks like a reflow issue (bug).<br />
The background image is corrected if I hover a (yellow highlighted) link.
Similar Messages
-
firefox won't access the internet but [as now with this question] IE does - this has happened before where I used IE to fix firefox
See if this helps you - [[Cannot connect after upgrading Firefox]]
-
I downloaded the newest version of firefox today 8/16/11 and now I cannot use Evernote (nor does clipmarks work from before) this is unacceptable. How do I return to the earlier version of firefox? If there is no way to do this, then I will have to use internet explorer so I hope you can help me with this. Thank You, Carol Roberts
Until Evernote updates their add-on to mark it compatible with Firefox 6, you can use the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter] to try re-enabling it yourself.
You can also downgrade to a previous version of Firefox from [https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ this archive], but please be warned that some old versions of Firefox have known security bugs that are fixed in later versions. See also: [[Installing a previous version of Firefox]] -
visit the following page in IE10 and IE11, and use your mouse wheel to scroll the page:
http://www.oussamaharb.com/
In IE <= 10, Safari, Chrome, and FireFox, the header section of that page stays put when scrolling. However, only in IE11, when you scroll the page the the header jumps around and jitters. Essentially IE11 will do this on any div with a fixed
background image.
Note the jitter does not happen if you grab the scrollbar with the cursor and move it up and down (which people rarely do). Some sort of bug when using mouse wheel has been introduced in IE11.You are too late to see. He removed
background-attachment:fixed with IE11. His link originally showed the stuttering. It looked too unsatisfactory.
You can still see his handsome design with FireFox where it continues to work well. (And also good with Chrome, Opera, Safari too). See how the picture on top stays fixed when you scroll the page? Not with IE anymore. With IE
that great effect is removed, sacrificed to cure the ugly wart. The picture now just scrolls upward with the page to avoid the IE11 bug. Too bad.
Since your first reply here 7 months ago. Have you any special MVP insider-info yet how to make this great CSS3 port-hole feature scroll smoothly with IE11? Or possibly, you have encouraging news that it will become corrected in IE12? Your
name is IECustomizer MVP. It sounds like you will know.
Here are more stutter examples for you to examine. You may click the background to toggle several different ways to see the affliction during scroll. Please post back and tell your observation that you can see this stutter.
https://googledrive.com/host/0B8BLd2qPPV7XOGl1Sjk3c29uVlU
Possibly somebody still hasn't yet noticed in bryanangler's example ("OP"), IE11 needs to be maximized (or large) to observe the problem. At least,
somebody has not acknowledged. Bryanangler's page is Responsive Web Design (RWD). The menu on top is present when space permits. That's when the
background-attachment:fixed applies and makes the horrid stutter. -
Background does not appear after applying template
CS4
template defined and saved in template folder.
when applying template to new html page, all transfers but background image does not appear, url is in code but does not find file. any ideas???
body {
background-image: url(file:///F|/projects/BBMD Projects/bbmd site v2/images/bridgelv2.jpg);
background-repeat: no-repeat;
background-color: #D2D2D2;
background-attachment: fixed;
background-position: 75px top;
height: 400px;
width: 600px;
position: inherit;
overflow: scroll;
top: auto;
left: auto;
right: inherit;
font-family: "Lucida Console", Monaco, monospace;
font-size: small;
font-style: normal;
color: #000;
border-top-style: none;
text-align: left;
vertical-align: top;
bottom: auto;
border-right-style: none;
border-bottom-style: none;
border-left-style: none;template defined and saved in template folder.
when applying template to new html page, all transfers but background image does not appear, url is in code but does not find file. any ideas???
If this is a new site and a newly created template, you DON'T need to 'apply' the template.
The best way to create new child pages is to :
FILE>New>Page from Template
There will be a list of any templates you've created, select the correct one and press create. Child page created :-)
Save as newpagename.html (not inside the Template folder though !)
PS; as others have pointed out, the link to the background image is incorrect it's pointing to your harddrive. Is the file within the defined site working folder?
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
After closing Firefox to use IE8 or any other program (like InterVideo to watch a DVD), everything is very choppy and slow. I have to go into Taskbar, Processes, and close firefox.exe manually (which is using up all the memory/CPU and should have closed before). Then, and only then, does everything behave normally. What is going on and what am I doing wrong or missing??
== This happened ==
Every time Firefox opened
== about a couple months ago and happens every time I close Firefox.<u>'''Kill Application'''</u>
In Task Manager, does firefox.exe show in the <u>'''Processes'''</u> tab?
See: '''[http://kb.mozillazine.org/Kill_application Kill Application]'''
'''<u>Causes and solutions for Firefox hanging at exit:</u>'''
'''[[Firefox hangs]]'''
'''[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit (Mozillazine article)]'''
'''[[Firefox is already running but is not responding]]'''
<u>'''Safe Mode'''</u>
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox SafeMode is a diagnostic mode that disables extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes before starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your extensions and then try to find which is causing it by enabling one at a time until the problem reappears. You have to close and restart Firefox after each change via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
<u>'''''Other Issues''''': to correct security/stability issues</u>
<u>'''Update Java'''</u>: your ver. 1.6.0.19; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed. -
Hi,
I'm currently making a website which need a fixed background, sort of like a patterned wallpaper. I need it to extend to any maximum adjustment of window browser. The background has gradient colors in it, so I can't make it repeatable. Can anyone help?
I'm using Adobe Flash CS3, a newbie in web design and have really tried exploring but I can't seem to find the right script for it.
Everytime I tried adjusting the window (I set it to 1024x768), it ended up to have white borders around.
I created the file in an actionscript 2.0. Am I doing things wrongly?
Please help..
example of same webpage background concept:
www.bambako.com (only mine created with flash)
www.merekastudio.comthat's css you put it in the head section of your html or if you have a external css file you can put it there. In case you dont know about css and don't have a css script in your html the entire script would look like this.
<style>
body {margin:0; padding:0; overflow:auto;}
</style>
the overflow auto has nothing to do with the gutter but will elininate a vertical scrollbar in IE7 and maybe other versions of IE. -
Fixed Background/Scrolling text table
I have a fixed background image (no repeat) I have a table
inserted (760px) that contains my text. My pages are different
lengths. How do I get the table to scroll over the background
image? (www.soulseekers.org.uk) Thanks for your help....Just be aware that background-attachment:fixed doesn't work
in IE6 and
earlier on anything other than the body tag....
I'm not sure about IE7, but I think it's OK there.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"FreakyJesus" <[email protected]> wrote in
message
news:fmi781$8el$[email protected]..
>I think it looks great. If i had any quibble it would be
it's too good an
>mage
> to waste mostly hidden.
> But now I see, though, that you've made it more visible
by removing the
> black
> bg in the table, and i think it's perfect as-is. If you
do want the image
> to
> appear only behind the table (i think that's what you're
describing) then
> you
> have to cheat a little. There are few methods but i
think the easiest
> might be
> to create a DIV the same width as the table. Give it
left and right
> margins set
> to auto (to centre it on the screen) and then make your
image the
> background to
> this DIV and make it fixed like before.
> Wrap this DIV around your table, and this will give you
the effect. But
> honestly, I think it's better as you have it now with
the image taking up
> the
> wider area. I love it.
>
> Andy
> -
Texture background does not come up or save with font with effect
I did this before and it worked-now it does'nt. I am picking a font in Live Type and putting a brick background behind-and I am clicking apply and apply new track. The brick background does not show up when I import it into Final Cut Express. Any ideas-stumped?
see my response to your other similar question
-
Here is my body tag...
<body onLoad="scrollit(100);" BGPROPERTIES="fixed" background="images/highway-bg.jpg">
I want my background to be fixed. Will this work in the Firefox browser? Is there another way?Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum. -
When I am in safari, I try to bookmark a web page and it is not doing it, it worked before I updated to the ios6 version, does any one know why ? It pulls up the screen to save it but then it is not showing up on the bookmark drop down menu, it continues to show the standard google,iPad user guide, yahoo....
hello sofg777, when you're at a page you want to print try to press ctrl+P and select a different printer than the Microsoft XPS Document Writer which seems to be set as your default printer in firefox at the moment.
-
FTXP-error-Domain MWART fixed value does not exist- Message no. F4341
Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
and enter values that represent the tax code for input tax which are
encountering the problem.
KALSM (tax procedure)
MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
This should only have a value "V" to represent input tax (or "A" if
output tax).
5) The cause of the error F4 341 is when this column does not contain
any value or is blank. Which means that there is no defined tax type
"A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
corresponding tax codes and complete all the customizing settings
relating to tax on sales and purchases thereunder. Afterwhich you
should no longer experience the error message.
Regards,
REnan -
Background does not show up when creating a PDF in InDesign
I have placed the same image in Illustrator and the PDF does show up the image.
Ooh. Ok. Thank you! I'm using InDesign CS5.5, Acrobat 10.1.6. Mac OSX (10.6.8).
Layer 1: background (TIFF): does not show up
Layer 2: Type and logos (EPS): do show up in my pdf.
-When I select Overprint Preview in Indesign the background is missing.
-I have created pdfs in different presets (smallest, high quality, etc) and still background does not show up.
-When I place ONLY the background on a new InDesign document, it does show up in the PDF.
-I have created a pdf with the background in Illustrator and it does show in my PDF.
Thanks! -
I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?
I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet. -
Retain background jobs and its variants before system refresh activity
Hello All,
I am going to perform system refresh activity on quaity system on monday. Customer wants to retain the background jobs and its variants in the quality system. Please guide me and let me know the steps to retain the background jobs and its variants before starting the system refresh activity.
Regards
SubbuDear Subbu,
You have to export the TBT* Tables to retain the jobs. You can do this with R3trans:
1. Make Export file
2. Make Import file
3. Make Export in Q System before Systemcopy
4. Start Database and not SAP
5. Make Import in Q after Systemcopy
6. Start sap
1. Make Export file /tmp/export_cmd
export
file='/tmp/export_Q.dmp'
client=<your client>
delete from TBTCA
delete from TBTCB
delete from TBTCCNTXT
delete from TBTCCTXTT
delete from TBTCCTXTTP
delete from TBTCI
delete from TBTCJCNTXT
delete from TBTCJSTEP
delete from TBTCO
delete from TBTCO_V01
delete from TBTCP
delete from TBTCPV
delete from TBTCR
delete from TBTCS
delete from TBTC_SPOOLID
delete from BTCEVTJOB
select * from TBTCA
select * from TBTCB
select * from TBTCCNTXT
select * from TBTCCTXTT
select * from TBTCCTXTTP
select * from TBTCI
select * from TBTCJCNTXT
select * from TBTCJSTEP
select * from TBTCO
select * from TBTCO_V01
select * from TBTCP
select * from TBTCPV
select * from TBTCR
select * from TBTCS
select * from TBTC_SPOOLID
select * from BTCEVTJOB
2. Make Import file /tmp/import_cmd
import
file='/tmp/export_Q.dmp'
3. Make Export in Q System before Systemcopy
R3trans -w /tmp/Q_export.log /tmp/export_cmd
4. Start Database and not SAP
sqlplus "/as sysdba"
SQL> startup
or
startsap
stopsap r3
5. Make Import in Q after Systemcopy
R3trans -w /tmp/Q_import.log /tmp/import_cmd
If you want to undo this, start the export script in P system and the Import script in Q system.
Don't be afraid of the delete statement but without delete it doesn't work!
6. Start sap
startsap
Best regards
Willi Eimler
Maybe you are looking for
-
Anybody have a suggestion on how to clean up audio in a video without having to re-import the files into iMovie? Thanks!
-
Primevera & BPM Integration and Installation
Hi Experts, Please help me with the installation of Primavera 6 V8.2 i have a working environment of BPM now how to install P6.I have followed the Admin guide but i was unable to install it properly.So plz any one who has completed the installation o
-
JavaHelp show under current window
Hi, I am trying to use JavaHelp (version 2.04). If I press F1, it works. But if I press a JMenuItem, the help system shows, but under the current window. The current window is a modal dialog, I can not bring the JavaHelp window on the top. How to fix
-
How to transfer stk from interim Strg Type in WM
I have Handling Unit Mgt active, & I want to know how I can transfer partial qty from an interim storage Type area to Physical storage Type area? I tried with LT01 but since there are two quants for same HU system is not allowing to do so.
-
Using Numbers as an Address Book?
I do not yet have iWork 08, but I was wondering if I can use Numbers as a second address book, with email, contacts and web pages etc. I would like to be able to copy and paste addresses straight into mail as you would from address book. I am really