Fixed Bellsouth Send Problem

http://support.att.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=18f5 302e-9dfe-4e61-b80a-8b883a2d41d2
I followed the instructions in this help article and can now send AND receive, vice send only.

Try one of the tricks posted by me or Old Toad in this Thread http://discussions.apple.com/thread.jspa?threadID=1201381
and, really important, DO NOT DELETE QUICKTIME PLUGIN.PLUGIN AND QUICKTIME PLUGIN.WEBPLUGIN, since you will solve your flash problem but you will not be able to view Quicktime embedded videos in websites (i.e.: www.apple.com/trailers)
Hope this will help!! Bye

Similar Messages

Adobe Send - Problem with uploading files. When is this going to get fixed?

When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.

The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod

MMy iPhone 4s is struggling to send messages and dial out.. service is going back and forth between Verizon with a little circle, Roaming, and No Service.. Best fix for this problem..? Thanks

My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
Thanks

My iPhone 4s is struggling to send messages and dial out.. Service is going back and forth between Verizon (with a little circle), Roaming, and No Service.. Best fix for the problem..?
Thanks

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HP LaserJet Pro M127fn - fax sending problem - busy status all time

everytime i try to print via word or other app and choose the fax printer from the program, it opens the wizzard to enter options and number but then it gets into a busy loop, spooling etc, and I cannot send it.
why? the machine was working fine when i firt bought it 2 weeks ago.
from the machine itself it's working but from the computer choosing the printer it does not. the same with other PC from same workgroup.
i tried uninstalling and deleting the printers as well but the problem keeps on.
windows 7 on all machines connected via ethernet

Thanks for providing the screen shot georgi0.
Since you can't do the system restore, check and remove any recent Windows Updates, to see if that will fix this issue.
Open Windows Update by clicking the Start button . In the search box, type Update, and then, in the list of results, click Windows Update.
In the left pane, click View update history.
Do you have full Admin Rights on the computer?
With that error you are getting, I would restart the Print Spooler on the computer to see if it helps.
Click Start (), type services.msc in the Start Search box, and then press Enter.
Double click on Print Spooler in the list.
Click on Stop and then Start.
Close that window and restart the computer.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
It might show a issue with the software installed.
Find and fix common printer problems using HP diagnostic tools for Windows?
Check the Devices and Printers folder to see if you have a icon for the fax and the printer icon.
How does it list the printer name and fax? (LaserJet Pro M127fn/fax or Universal PCL 6)
Follow the steps in this document to get to the device manager to check for the printer entries. See if you have any conflicts for the fax driver. Also check devices and printers, to see if there is a icon for the fax.
How do I get into Windows Device Manager?
Then go to View, Show Hidden Devices. Check through the list for the printer entries. You might have to click on all the + signs to check under the headings. Open Printers, it should list the printer name and fax there and possibly under Universal Serial Bus Controllers. Look for anything with a ! mark on it. Right click and update the device.
If it isn't listed then go to Action across the top of the screen and Scan for hardware changes.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
How was the printer entries listed?
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

10.5.1 Doesn't fix two key problems

I realise that no update to an operating system will fix everyone's problems. However, here are two most annoying things about Leopard that I would sure like to have fixed.
1) Repairing permissions. In 10.5 I would try to repair permissions. The barber pole would spin around indefinitely, and finally permissions would be repaired. In 10.5.1 the barber pole does not appear, but I get the progress bar chugging along indefinitely, and finally permissions are repaired. Considering permissions repair is supposed to be routine maintenance in OSX, I would have hoped that Apple would make it just as speedy as in 10.4.
2) Administrator password. The only way I can shut down or restart my computer is by logging off all users, including myself. Otherwise I get a message that my password is incorrect. However, my password is recognised at other times, such as doing Software Update. This is particularly vexatious.
Has anyone got a suggestion?
Thanks!

Interesting. My main screen has the higher resolution and is my main monitor. I tried the experiment someone mentioned of moving the menu bar over to the second, lower resolution screen, and then QuickLooked a file on the Desktop from there--the preview opened on my big monitor even though it was no longer the main monitor. So you are correct, and it is a bug. Be sure to send Apple feedback:
http://www.apple.com/feedback/macosx.html
Or you can join Apple Developer Connection and file a bug a report--although obviously some people have already filed bug reports on the issue. It would still be worthwhile to at least send feedback, sticky wheel gets the grease sort of thing.
Francine
Francine
Schwieder

A new clue to the Apple Mail sending problems?

In my continuing efforts to fix the SMTP/POP mail failures with Apple mail, I've noticed a glitch that some of you more advanced readers might be able to decipher.
After lots of fruitless messing around with port numbers, preferences, and keychain fix attempts, what did work for me (temporarily) was a cleaning out of all the servers listed on the mail account options window, and then putting the original names and other info back in. Somehow, the mail app is spontaneously generating multiple combinations of server names, usually the original server name, plus a user name, the server name again, or some other redundant combination.
As I use mail to manage two separate POP accounts, sometimes it also creates hybrid server names by combining the server/user name pieces across both accounts.
This appears to happen entirely on its own; I had mail working for about 90 minutes, then it fell into this problem again. I'll probably have to keep cleaning it out, like a boat owner scraping barnacles off the hull, until Apple offers some kind of a patch.
Has anyone else who has the nagging "can't send SMTP mail" problem seen this phenomenon in their server/account preferences specs? If so, any ideas on how to stop this madness?

You haven’t said what the problem was in your case, i.e. what error message did you get when sending, if any, whether the mail account and the associated outgoing (SMTP) server were provided by your ISP or by someone else, etc.
Mail doesn’t spontaneoulsy generate outgoing server entries, but it keeps information about outgoing (SMTP) servers in a separate list independently of the mail accounts themselves. The account settings just associate one of the available outgoing servers with each account. Deleting an account doesn’t remove from the list the outgoing server that was associated with it. Orphaned or dangling outgoing server entries (i.e. not associated with any account) sometimes cause weird sending problems, and could very well have been the problem in your case as well.
As you appear to have already found out, you may go to Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP), choose Edit Server List from the popup menu, and delete any servers that shouldn’t be there — the Edit Server List panel shows the account each outgoing server is associated with.

Fix your email problem

Use our Troubleshooting Tool to diagnose and fix common email problems.
Troubleshoot Now
Forgotten Telstra broadband username or password
If you can’t remember your Telstra broadband username or password ([email protected], [email protected], [email protected]), you can retrieve your forgotten username or password.
Can’t send or receive email
If you can't send or receive email, it may be because:
Your computer or mobile isn't connected to the internet. Check if you can access other websites. If you can't, check your network cables to ensure they’re plugged in correctly. You can also check our service status in your area.
Your email has reached its storage capacity. Try deleting some old or unimportant emails to free up space.
Your mailbox has been suspended. Get help on restoring a suspended mailbox.
Your network has a firewall that’s blocking connections to your outgoing mail SMTP server.
Your email settings or authentication aren’t set up correctly. You can check your settings using these guides:
Set up Telstra email on the BigPond platform, on your computer
Set up Telstra email on the Outlook.com platform, on your computer
Set up Telstra email on the BigPond platform, on your tablet or mobile phone
Set up Telstra email on the Outlook.com platform, on your tablet or mobile phone
Can’t send emails, but can receive them, or prompted for a password to send email
If you can’t send emails, but can receive them, it may be because your email server settings are out of date or your outgoing email traffic is blocked (in Port 25) to combat spam.
A third party gatekeeper may be marking and blocking your emails as spam. In this case, you’ll get error messages from the gatekeeper. Read the messages carefully for help on how to fix the issue. If your account has been compromised, you should change your password, update your internet security software and run an anti-virus scan on each device that accesses the account.
What to do about spam or unsolicited email
If you’re receiving spam, it’s likely to be a hoax or scam. You can adjust your security settings to have higher restrictions on incoming email.
If you’re receiving spam from an email address you know, the account could be compromised.
If people are receiving spam from your email address, your account could be compromised. To restore your email service:
Update the internet security software and run an anti-virus scan on each device that accesses the account
Contact Telstra on 13 2200 to reactivate your mailbox
Reset your password through My BigPond or My Account and update your gateway and email programs with the new password, which must be different to any previously used
Learn more about Cyber Safety and how to protect your privacy online.
Slow email connection
If you experience a slow email connection, it could be due to a network issue or your email set up. To troubleshoot:
If you're an ADSL or Cable customer, use our Troubleshooting Tool
Check for known issues in your area that may be affecting your service
For general assistance
Contact our faults and technical support team for general assistance on 13 3933
Contact 24x7 Chat
Subscribe to Telstra Platinum for access to our technology experts on the phone, online or in-store, including 24x7 support and in-home options.

It doesn't address what I needed help with
My outlook email on my bigpond account is too slow it's taking far to long to download emails and it does not download all e.g. I have 99 emails and it has only downloaded 26. I have checked the service in my area and it reports OK as of 18/12/14. My ADSL is working properly and is connected through my phone line. Please help urgently as it affects my business.

Bellsouth "send" e-mail issues

I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to do with Bellsouth's conversion to AT&T or not.
Basically, I can receive e-mail and send newly created, blank e-mail. However, I am unable to send e-mail with attachments or reply to e-mails received or forward e-mails received.
I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
I am at a complete loss and don't know what to try next. Any suggestions????

Robert Daddario wrote:
I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to L"*_ with attachments or reply to e-mails received or forward e-mails received.
I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
I am at a complete loss and don't know what to try next. Any suggestions????
I had problems when I converted to Mac last Spring, and most of the problems came from the DSL Tech Support Team.
Please make sure that your settings haven't changed from the following.
Go to Mail - Accounts
POP Acct Incoming Server: mail.bellsouth.net
SMTP - Outgoing Mail Server: mail.bellsouth.net
Click on Server Settings:
Sever Port Should Be: 25
Make sure SSL - Secure Sockets Layer Is *NOT Selected*
Click OK
Select Addvanced on the upper right of the Accounts Tab.
Port should be : 110
*Do Not Select* Use SSL
Make sure the following are selected:
1) Enable This Account
2) Include When Automatically Checking For New Mail
3) Remove Copy From Server After Retrieving A Messagee
Hope this helps.
I work for at&t - formerly BellSouth, and we haven't done any email transformations for our FastAccess customers, and I'm sure that when we do a Transformation, you will have Dual (bellsouth -at&t) emails for a while so you can advise Family and Friends.

Yahoo! Mail send problem

Hello all, anyone know when we will see a fix for the Yahoo! Mail sending problem? (This is when the iphone appears to have sent an email by playing the "swoosh" sent mail sound, but the message was not sent, the way users have been getting Yahoo! Mail to send again is by turning their iphone off then back on).
Cheers

For what it's worth I also had this problem with Yahoo mail on my iPhone. After getting tired of waiting for Yahoo to do something about it, I decided to cancel my Premium Yahoo account and switch to Gmail. I have to tell you Gmail has been amazing and I haven't looked back since. IMAP Gmail on my iPhone has made my email experience a pure joy.
BTW - I had my Yahoo account for over 7 years. And did you know that Yahoo is an acronym for You Always Have Other Options? Well I took them up on their advice since I wasn't too impressed with their service! My 2 cents.

"Send" Problem with Mail

When I reply to an email in Mail, the "send" button in the reply message windeow is greyed out and will not function. This has occured since the machine was updated to OS X Tiger. What is the fix?

In case you're missing something, instructions for setting up an AOL account in Mail can be found here:
http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html
The instructions are for Mail 1.3, but they can be used for Mail 2.x as well, noting that the Special Mailboxes preference pane is called Mailbox Behaviors in Mail 2.x.
You may also want to read the more general guide the above article is part of:
Accessing the AOL Mail System using IMAP - An Unofficial Guide
Also, Mail Help has some articles devoted to sending problems, e.g. I can't send email or I can't send email because the connection to the server on port 25 timed out. You may want to take a look at them in case there is something there that applies to you. Something that usually works is changing the outgoing server port to 587 instead of 25.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem?

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Fixed Bellsouth Send Problem

Similar Messages

Maybe you are looking for