Fixed BOM - Assembly Operation and Data to Collect on Assembly

On a fixed BOM for a repetitive order the Assembly Operation is populated with the correct operation for reporting consumption to ECC.  However, the Data to Collect on Assembly on the material is set to NONE.  Why does ME do an auto assemble at the first step for all the material regardless of the setting of the Assembly Operation on the BOM?

Hello,
If assy data type is set  to NONE, component is considered as auto assembled component. These type of components are automatically installed into parent material during SO release. This is controlled by a hook that is set up and enabled by default on site level.
regards,
Konstnatin

Similar Messages

  • OIM: How to get the last operation and data from a child form action

    Dear OIM guru,
    I have a regular Process form, a child form and a process definition. When there is an insert/delete into child form a trigger is raised and the process task gets called. The process task does whatever it needs to do on the target system. This is all fine. However, after the task completes, lets say successfully, I want to send out an email to the user saying, for example, group 1 has been added to you or just got deleted.
    I am not able to figure out how to get that last operation and child form data. I am sure you came across this and if so please let me know how to do this.
    Thanks

    So, Can I add a similar process task with the same exact condition one more time? I thought I couldn't use the same condition again. For example, when a group is deleted can I use the process data->child data->group Id with old value check box checked on another process task?

  • Sub Order and Super Order - Operations and date in IW49N

    Hi Experts,
    Please explain in brief the scenario of Sub Order concept
    I am trying to use this scenario if we couldn't able to perform number of activities which is in Superior order
    I am copiying those activities in Sub Order and deleting those activities from Superior order
    And i am changing the date in sub order which is in future (i.e in main order date is 07.06.2014 and in sub order i am chnaging the date is 070.07.2014)
    It means further activities i will do in next month date.
    Correct if i am wrong
    And please explain the effect in report IW49N , Sub Number , Sub Operation , Superior Activity not showing and
    Sub Order is showing in Order and my main order showing in Super Order
    For Super Order Activity not able to seen.
    Please help which report we can refer to check where we can see activities for both orders along with date.
    Thanks & Regards,
    Abhishek Patel

    Sami,
    What issue?  Those results are perfectly acceptable under certain business scenarios.
    Your sched start/finish implies that your routing has no duration being calculated during the schedule process.  If this is your issue, look at the various forumulas attached to the scheduling tab of your work center(s)(CR03).
    Rgds,
    DB49

  • TS4526 Found a fix for the time and date issue

    ROKU GEN 3

    I am simply lookig for some help not an argument.  I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts.  I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another.  As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP.  This MBP was running Leopard when the problems started
    I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue.  I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion.  In Windows 7 I am able to print and scan to my hearts content without any issues.  I am able to browse the internet as much as I want.  I close Fusion and try to connect to my printer via wireless and nothing.
    In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems?  Out of the 1000 + posts is there a consolidation of which answer is the best?  BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
    In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time.  Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. --  Thanks

  • How to Create Fixed Bom using BAPI

    Hi all,
    Iam using the BAPI "BAPI_BOM_UPLOAD_SAVE" for creation of Fixed BOM of Materials.
    I don't know how that is used,I mean i don't know the inputs,
    Pls can any one Provide me TEST DATA for this Bapi.
    or a sample Program how fixed bom is created.and how can we know thet bom has been created.
    for e.g if we create super bom ,the Bom links are  stored in cs41,so we are able to know super bom has been created but how to check for fixed bom.is that the same for fixed also.
    i have some inputs and with that inputs ,BOM is not being created and the BAPI return table type was E.

    Hi,
      The FM BAPI_BOM_UPLOAD_SAVE is using CSAP_MAT_BOM_CREATE to create the BOM but it does not have any option to specify the alternative to be created.Look for some other FM if you need to create an alternative BOM.Check if the FM BAPI_MATERIAL_BOM_GROUP_CREATE can be used as an alternative
    also  check this FM.
    CS_BI_BOM_CREATE_BATCH_INPUT1 - Create a new BOM or New Alt. BOM.
    CS_BC_BOM_CHANGE_BATCH_INPUT - Maintain the BOM.
    <b>Reward points</b>
    Regards

  • Operator and Unparseable Date "0"

    Has anyone come across this Unparseable Date "0" error when starting up OPERATOR?
    It has just started happening in the last couple of days.
    Operator still works OK but the error is really annoying
    Thanks,
    G
    UPDATE_
    OK - I have operator installed on another workstation which does NOT get the error. On that machine, I have not changed the odiparams.bat file whereas on the workstation where I get the error is configured to point to my sql server master and work repository in the ODI_SECU_DRIVER, ODI_SECU_URL, ODI_SECU_USER, ODI_SECU_ENCODED_PASS, ODI_SECU_WORK_REP,ODI_USER, and ODI_ENCODED_PASS settings....
    Edited by: geeo on Sep 24, 2008 4:06 AM

    Hi-
    It seems to be a bug with ODI operator and concern data values incorrectly populated in filter definition. To fix this issue temporarily, do the below steps:
    1. Open ODI Operator.
    2. Click on the "Filter" button under the menu bar to open a window called "Define Filter".
    3. In this window, clear the 2 "From" and "To" fields.
    4. Close ODI Operator and all other open ODI GUI applications.
    5. Reopen ODI Operator.
    6. Uncheck the "Filter" checkbox in order to disable filtering.
    7. Close ODI Operator and all other open ODI GUI applications.
    8. Reopen ODI Operator.
    Thanks,
    Saravanan Rajavel

  • Create New Operations for data collection(View Object)

    ADF data collection(View Object) supports Create, CreateInsert, Delete, etc operations.
    And would like to add more operations like clear, etc. How do i create my own operation and add it to data control for all the view objects in the data control.
    Thanks
    JP

    hi esjp2000
    I'm not sure what kind or "clear operation" you are looking for, but I recently asked about a "clear search" in this forum thread:
    " ADF BC : "clear search" using executeEmptyRowSet() "
    ADF BC : "clear search" using executeEmptyRowSet()
    It is about the executeEmptyRowSet() method, and that might not be what you are looking for. (It might not even be what I am looking for because it is undocumented and that is what my question is about and I haven't had an aswer yet.)
    But ... it does provide an example of a "service method" Shay is referring to, in the example application:
    http://verveja.footsteps.be/~verveja/files/oracle/ClearSearchStuff-v0.01.zip
    (So, the specific service method implementation, "ScottServiceImpl.executeEmptyRowSetOnEmpWithParamsVOVI()" in the example, would be different in your case, depending on the specific "clear operation" you are looking for.)
    success
    Jan Vervecken

  • Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help the client in Data Mapping activity.

    Hello All,
    Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
    Thanks,
    Mownesh

    There are standard templates in HCI data sources.
    e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
    KNVP is the table for customer in ECC from that you can select the fields as required
    KUNNR for customer Number
    ADRNR for Address
    List of a few commonly used table names of ECC:
    Product Related:
    MARA – Material Master (MATNR)
    MARC – Material Master with Plant Data (MATNR, WERKS)
    MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
    MAKT – Material Master Material Descriptions (MATNR, MATKL)
    MBEW – Material Valuation Data (MATNR, BWTAR)
    MVKE – Material Master : Sales related Data
    MDKP, MDTB – MRP related Data( Header, Item)
    MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
    Vendor/Supplier related:
    LFA1 – vendor data (LIFNR)
    LFB1 --  Company Code Segment : Vendor Data(LIFNR, BUKRS)
    LFC1 --  FI Related Vendor Data (LIFNR, BELNR)
    LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
    PReq/PO, BOM Related:
    EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
    EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
    EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
    ELBK, ELBN, ELBP – Vendor Evaluation Related Data
    EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
    EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
    Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
    For RFQ it is ‘A’ and for PO it is ‘F’
    MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
    MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
    Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
    use the following very often.
    EQUK – Quota (Header)(QUNUM, MATNR)
    EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
    EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
    EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
    EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
    EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
    T163F – Confirmation Texts (EBTYP, EBTXT)
    T156 – Movement Types (BWARE)
    T024 – Purchasing Groups
    T024E – Purchase Organizations
    T163 – Item Category’s in Purchasing Documents(PSTYP)
    T149D – Valuation Types
    T134 – Material Types
    FVLK – Delivery Types
    STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
    STPU, STPN, STST, STZU – BOM Related Tables
    RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
    KONO, KONH – Pricing data
    T006 – Basic Unit Of Measurements
    Customer/Sales Order Related:
    VBAK : Sales Document(Header Data) (VBELN)
    VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
    Enquiry, Quotation, Sales Order are differentiated based on Doc.
    Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
    LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
    LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
    (LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
    VTTK : Shipment Table(Header Data) (TKNUM)
    VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
    (VTTP – VBELN = LIKP – VBELN)
    VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
    VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
    (VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
    Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
    following tables frequently.
    VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
    VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
    VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
    VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
    VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
    VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
    VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
    TVLKT: Delivery Type: Texts(LFART, VTEXT)
    KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
    NAME1,LAND1)
    KNVK: Customer Master Contact Person(PARNR, KUNNR)
    KNVV: Customer Master Sales Data.
    LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
    MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
    TVKO: Sales Organizations(VKORG)
    TVKOV: Distribution Channels(VTWEG)
    TVTA: Divisions(SPART)
    TVKBZ: Sales Office(VKBUR)
    TVBVK: Sales Group(VKGRP)
    T077D: Customer Account Group(KTOKD)
    T001W: Plants(WERKS)
    T001L: Storage Locations(LGORT)
    TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
    TVAU: Sales Document (Order) Types
    KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
    T685T: Condition Types Texts.
    ADRC: To get Addresses of Partners
    VBBE, VBBS: Sales Requirements Data
    VBKA: Sales Activities Data
    VBPV: Sales Document Product Proposal
    Based on the functionality you can search ECC table names and fields
    Hope this information is helpful for you.
    Thanks and Regards,
    Anjali

  • Apex Collections and dates

    Apex Collections and Dates
    I made an earlier posting today on the forum titled “‘ORA-01861: literal does not match format string’ error after my hosting company upgraded to Apex 3.2.” The issue relates to Apex collections and dates. Prior to the hosting company upgrading Apex 3.2 from 3.1 all was working OK. It seemed a reasonable assumption that the issue relates to the upgrade to 3.2. Having tested the code against another Apex 3.2 installation I am satisfied that the issue is not with Apex 3.2. That said, I am still getting the issue on the hosting site.
    To demonstrate the issue to my hosting company and this forum, I put together a simple one page application that demonstrates the issue using the least amount of code.
    I created a page with an ‘On Load – Before header” process that sets up an Apex Collection with a single value of ’20-FEB-2009’ in the c001 element as follows:
    if apex_collection.collection_exists(p_collection_name=>'THEISSUE') then
    apex_collection.delete_collection(p_collection_name=>'THEISSUE');
    end if;
    apex_collection.create_collection(p_collection_name => 'THEISSUE');
    APEX_COLLECTION.ADD_MEMBER(
    p_collection_name => 'THEISSUE',
    p_c001 => '20-FEB-2009');
    I added an SQL REPORT region to the page which uses the Apex Collection as follows:
    select to_date(c001,'DD-MON-YYYY') testdate
    from apex_collections
    where collection_name='THEISSUE'
    and to_date('20-FEB-2009','DD-MON-YYYY')
    = to_date(c001,'DD-MON-YYYY')
    When the page is run I get the ‘ORA-01861: literal does not match format string’ error.
    If I remove the following from the SQL Report Region:
    and to_date('20-FEB-2009','DD-MON-YYYY')
    = to_date(c001,'DD-MON-YYYY')
    and run the page, the date is displayed OK, i.e., c001 is converted to a date OK. This made me wonder whether it does not like the line to_date('20-FEB-2009','DD-MON-YYYY')? So I changed the where code for the report to :
    and to_date(c001,'DD-MON-YYYY')
    = to_date(c001,'DD-MON-YYYY')
    i.e., convert c001 to a date and compare it to itself. The rationale being that if the c001 converts to a date OK, then comparing c001 converted to a date with itself should not give an error. It did it gave the same error ‘ORA-01861’
    It would seem on my hosting site since the upgrade, that Apex and Oracle have problems with Apex Collection elements being converted to dates as part of the where clause.
    Now my understating of Oracle Apex collections in simple terms is that all Apex collections are held in a single Oracle table managed by a series of Apex functions. Given that all Apex collections are in the same table, could the issue be with the Oracle database when it is creating its execution plan for the query? Could Oracle be including the value of c001 from other collections (i.e., when c001 is not in a date format ) in the initial stages of its execution plan?
    I hope the above make sense and thanks in advance.
    Ian

    Scott,
    I believe I have found the answer the statistics on WWV_FLOW_COLLECTIONS$ and WWV_FLOW_COLLECTION_MEMBERS$. are out of date and Oracle is doing a full table scan instead of using the indices to select only the c001 columns that belong to the given collection_id. If I change my simple example to store the date value in c050 it works ok. (In all probability this will be the only collection on the hosted database to use c050).
    I have asked the hosting company to gather stats on all the apex tables.
    Thanks for your help
    Ian

  • My gradson got ahold of my grandaughters IPod touch and I no longer have a settings button.  The time and date on this is wrong.  How can I fix this problem.

    I need help...  I no longer have all of the buttons on my IPod touch screen.  My grandson got a hold of it and boom..  The time and date is wrong also, and I have no access to fix this problem.  There is no settings button.
    Any help would be appreciated.

    Assuming that by buttons your mean the icons for various apps are missing, use the Spotlight search feature (double click the Home button and go all the way to the left past the music controls) and search for: Settings. Go to Settings>General>Reset>Reset Screen layout and also correct the time inthe Genera settings.
    The Setting app can't be deleted or hidden via Restrictions.

  • The find function (Ctl+F) , doesn't not expanding the xml file , to search for given search. If the the xml file is expanded , then find function finds the tag and data. How to fix this.

    The find function doesn't expanding the xml nodes to search. If the xml is expanded , then find function highlights both matching tag and data. how to fix this.
    == This happened ==
    Every time Firefox opened

    <xsl:value-of select="x"/> produces a string that consists of all text nodes in x.
    <xsl:copy-of select="x"/> produces an exact copy of x.
    Go to http://www.zvon.org/ for more information like this.

  • Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?

    Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?

    If your preferences keep getting messed up try this:   make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Happy Holidays

  • Measure Formulae for Uploadable and Data collection report

    Hi,
    I have query related to application of measure Formula for Uploadable and Data collection report.
    Consider a scenario where i use a MDX query to create a data collection report and I map these columns from these reports to an rowsource using a loader file. Can I use measure formula feature like onchange to work with Uploadable and Data colection reports such that changes to any one column should take effect in another column.
    Regrads,
    Wesley

    Wesley,
    IOP uploadable reports are used for sending data to the server in batch. They are coupled to the IOP model via a rowsource. You have a lot of flexibility with the spreadsheet you build for staging the upload. It's really just a function of how crafty you are with vb. Cascading changes from one column to another can be easily accomplished this way.
    Onchange formulas are for something else. They are part of the model definition and are used for describing how to cascade changes between IOP data blocks.

  • Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

    Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

    Hi, do you mean a real Dial-up Modem as in the old days?
    As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
    http://www.zoomtel.com/products/dial_up_external_usb.html
    Or is the Modem on the other end Cable/DSL/FiberOptic?

  • The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

    I agree and I found your post because I did a google search ical typeface dim.
    If I find anything out, I will post back here.

Maybe you are looking for