[fixed] /dev/cdrom broken since upgrade to kernel 2.6.28.8
Yesterday, before I upgraded to these packages:
kernel-2.6.28.8-1 (relevant)
not relevant (see discussion): klibc-udev-140, udev-140
I could use /dev/cdrom fine as a link to my actual CD-drive. For example I used
cdparanoia -Q
while having a Audio-CD inserted and this gave me the TOC of the CD.
After the update I have this:
/dev/cdrom exists but isn't accessible. By default,
cdparanoia stops searching for an accessible drive here.
Consider using -sv to force a more complete autosense
of the machine.
More information about /dev/cdrom:
Checking /dev/cdrom for cdrom...
Could not stat /dev/cdrom: No such file or directory
After some testing I found that my device names somehow "shifted". These both work
cdparanoia -Q /dev/sr0
cdparanoia -Q /dev/sg1
So, yes it works, but before I didn't had to set everything to /dev/sr0, because the default /dev/cdrom just worked.
Is this a bug or a feature in the new udev?
EDIT:
This seems to be not a problem with the udev upgrad, but rather with the kernel upgrade. See discussion below.
Last edited by JonnyJD (2009-03-31 23:30:16)
@skyscraber: I don't know if this is related. My problem boils down to just the kernel upgrade now and I haven't had problems that bad.
@magaso: I also that problem during testing. For me the fix was not using the new kernel with old udev-139. Doing that gave me "/dev/cdrom -> /dev/cd/cdrom-1:0:0:0" and "/dev/cd/cdrom- -> ../sr0".
Now back to the problem that started this thing:
This is NOT because of the upgrade to udev 140. Like I wrote above, I got the new kernel at the same time. Downgrading udev and klibc-udev didn't help with my problem, but downgrading to kernel 2.6.28.7-2 made everything work again.
The symlinks were also NOT the problem, because my symlinks itself work fine, even when the problem occurs. Either way they are like the ones from B:
lrwxrwxrwx 1 root root 21 26. Mär 17:16 /dev/cdrom -> /dev/cd/cdrom-1:0:0:0
lrwxrwxrwx 1 root root 6 26. Mär 17:16 /dev/cd/cdrom-1:0:0:0 -> ../sr0
brw-rw---- 1 root optical 11, 0 26. Mär 17:16 /dev/sr0
So with the old kernel "cdparanoia -Q" works again, without having to specify /dev/sr0 explicitely.
Similar Messages
-
[Solved] HDMI audio broken after upgrading to kernel 3.13.4
Hi,
Yesterday I upgraded to kernel 3.13.4 from 3.12.9 and
HDMI audio through my nVidia GTX660 card stopped working.
The problem occurs both with nouveau and nVidia drivers.
My system is an aged Intel quadcore Q9400 on a Intel motherboard.
By typing "aplay -l" I get:
card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
Strangely the alsa card number changed from 1 to 2
after the kernel upgrade.
I would really appreciate any help.
Thanks
Last edited by tenoriocalc (2014-02-23 16:02:46)Thank you very much, silenceleaf.
I managed to make it work with some tweaking like you said.
But only after a deep power cycle, unpluging any power to the system.
Just turning off the machine's power button was not enough. Odd!
Last edited by tenoriocalc (2014-02-23 16:09:44) -
Rendering of Arabic/Transliteration broken since upgrade to 29
Hello,
Mozilla Firefox 29.0.0 - 29.0.1, MacOS X 10.9.2
Problem: Arabic fonts (Lateef, Sheherazade) as well as transliteration Arabic > Latin is broken since update to 29. They were fine before. This happens when loading pages from a database. The protocol uses 'mixed content' and there seems to have been an update in Firefox's handling of such content. However, even explicitly unblocking such content doesn't solve the problem (apparently, one has to deblock every single page or is there an option for an entire domain? Otherwise, this is a pain in the neck and completely impractical). Firefox 'chooses' to select encoding seemingly at random: View > Character Encoding > Unicode/Western. Unfortunately, this version of Firefox scratched the possibility to select default encoding.
Now, the pages loaded do not declare their encoding. However, this was not a problem because FF would use Unicode (UTF-8) by default. Setting instead "Default for Current Locale" is obviously useless. That's where the problem seems to be. Why was the plain default option changed so that we have no longer access to it? As you will understand in mixed environments (using a variety of languages and keyboard layouts), 'default locale' is pointless. Any suggestions are most welcome.FredMcD. Thank you for the hints. I'm sure they help in most cases. It didn't solve my problem though. Normal websites work actually quite well, it's just the internal ones that have this problem.
cor-el. Thank you also for your hints. I checked and I'm pretty sure that it's not a corrupt font. The problem, as I've mentioned, is that the server does not declare its encoding. This wasn't a problem as long as UFT-8 could be declared as fall-back. Now, as I've written, there is only the option 'Default for Current Locale' which doesn't help. I suppose either Mozilla puts back the older option or we have to do something here. Would love to post link but I'm not sure there is general access to our servers (probably not) but I'll ask.
I attached an exampled of how the 'garbled' text looks. It's more than garbled there just no font 'resolution'.
Thank you both again for taking the time to give advice. I think your hints will come in useful in general use of Firefox. -
Sound broken since upgrade from 2.6.29
I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated. -
Bash completion broken since upgrade
Hi,
since I did an upgrade the bash autocompletion behaves strange. Completing directories will end in a space instead of an slash. Eg you enter "/et[tab]" and it completes "/etc " instead of "/etc/". This makes navigating directory hierarchies a PITA. Can anyone confirm this? Any known workarounds?For those still looking for a solution to this:
From: http://aur.archlinux.org/packages.php?ID=16980
Comment by: vl981 on Fri, 31 Dec 2010 03:57:13 +0000
Hi.
For those who use this package and bash completion in same time:
remove the _filedir function from the '/etc/bash_completion.d/acroread'
file provided by the package. See http://forums.adobe.com/thread/745833.
P.S. Updated PKGBUILD and respected acroread files one may found here:
https://github.com/vp1981/pkgbuild/raw/master/acroread/PKGBUILD
https://github.com/vp1981/pkgbuild/raw/master/acroread/PKGBUILD
Last edited by kontax (2011-02-11 10:52:20) -
Ethernet broken since upgrading to Yosemite
On my Mac Mini (circa 2010) I upgraded to Yosemite and ever since I can only operate on the WiFi, Ethernet will not configure or work. It is currently stating there is not cable attached - but there is and I have tested the cable on my PC (it works just fine there). Any idea what to do?? Running OS X 10.10
Well, the issue with USB anything is that the device manufacturers have to supply compatible drivers. Check with CableMatters for an updated driver.
http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=131 -
Cannot automount usb, cdrom,dvd since I update kernel
Hi all,
I cannot automount my usbdrive, cd, dvd since I downgrade my kernel to kernel26-2-30.2 (which I know is not the latest).
I am also using hal 0.5.11-4 (downgrade again, since this is the only one that allow me to restart and shutdown without problems). I have to manually mount my usbthumb drive which is annoying to say the less. I have try the following:
1)udev tips and tricks
2)autofs
3) hal
but no sucess. what I want, is when I place my usb stick in the port it pop up on my desktop as it use to.
My desktop manager is xfce4. Any help please. ( I am a linux newbie)
ThanksCheck lsmod if libata is installed.
I remember seeing something that libata needed to be added manually to make DVD/CD work. -
Since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?
since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Since upgrade to 10.4.5: Faxing via shared fax modem broken?
Since upgrading my Macs to Mac OS X 10.4.5 sending faxes via a shard fax doesn’t work anymore. When attempting to send a fax the error message
"Error while printing"
pops up. However, when faxing directly from the Mac with the shared fax modem, everythings works flawlessly.
This used to work prior to upgrading to Mac OS X 10.4.5.
Anyone here with similar experiences?
Werner.
Mac mini Mac OS X (10.4.4)The kernel panic points to Airport. Either your Airport software is way out of date or your Airport card may not be properly seated or has failed. So the first thing to do is remove the Airport card. If the panics cease, then reinstall the Airport card and see what happens. If it panics again, then remove the Airport card.
The next thing I would do is:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The next thing I would do is download the 10.4.4 Combo Updater and reinstall the update. Then reinstall the Airport card and see if it works properly.
I would suggest that before installing the update that you first boot into safe mode. -
Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts. I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?
Hi Milrclan,
Thanks for contributing to the Apple Support Communities.
If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best Regards,
Jeremy -
Since upgrading to v 4.01 I am unable to print from a .pdf opened in the browser. How can I fix this?
I can save the page, open in Adobe Reader and print. When in the browser the File - Print command does nothing. Printer screen does not open.
Windows XP, all updates installed.Hi,
One thing to slow it down: low ink. Please check ink cartridges and replace if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Since upgrading my Macbook to Yosemite 10, I can no longer print to my Kodak AiO 5250. The fix on Kodak site with Terminal does not prompt to password like it says it will. Macbook has all available upgrades completed. Printer works with a PC.
This is where I found the Kodak fix: http://support.en.kodak.com/app/answers/detail/a_id/49247/selected/true
I'm not really comfortable in 'Terminal' but tried it. Nothing happened after pasting in the first command. The fix says it will ask for password.
I see now this seems to be a pretty common problem, I would have thought Apple would fix it with an update for the number of complaints I've found. Since Kodak is in receivership or bankruptcy, I would think it's unlikely they will have any more solutions. I feel like Yosemite stole my printer. -
Since upgrading to 11.1 ITunes keeps freezing, I have windows 7 64 bit. I have tried opening in safe mode and creating a new user, I have also uninstalled and reinstalled. What can I do to fix this? Its very frustrating.
Hey pbonnett!
Here is an article that will help you troubleshoot these issues with iTunes on your Windows computer:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Since upgrading to 8.0 I can no longer print from Mapquest Classic. It's not a Mapquest problem it's a Firefox problem as I am able to print using IE. I haven't encountered any other sites problems yet but I'm sure it's to come if I don't get this fixed. I need to be able to print. How can I fix this?
I also do not like the new layout. How can I go back to my previous version?What precisely do you mean by deleting the podcast app from both the phone and Mac? I have deleted the podcast app from my phone but on my Mac in iTunes->iPhone->Apps it shows up albeit with a button labelled "Install". I've resynced 3 times and when I try to access my Podcast playlist in the Music app, I still get a message telling me that podcasts have moved to the Podcast app. I'm really sick of some of the changes Apple has made to their software.
-
Since upgrading to 5.4 LR uses todae instead of photo creation date. How to fix this?y's dat
since upgrading to 5.4 on a mac, LR persists in using today's date instead of photo creation date when i use "Date" as part of renaming template. never did this when using 5.3. i rename images on import. Please help if anyone knows how to fix this. thank you. using os mavericks.
since upgrading to 5.4 on a mac, LR persists in using today's date instead of photo creation date when i use "Date" as part of renaming template. never did this when using 5.3. i rename images on import. Please help if anyone knows how to fix this. thank you. using os mavericks.
Maybe you are looking for
-
Iv just downloaded SDK v1.4.2, and after i tried to install it, i got "internal error 2775. 1624 http://forum.java.sun.com/webapps/download/getfile/1.4.2_01-bo6/windows-i586/java 2 sdk, SE v1.4.2_01.msi" Please help
-
all said oh, when i need java for some pages it doesn't show. but not all the time.
-
Hi All, I have transported my development from one environment to another. When i go to Sender agreement and display WSDL i am getting the follwing error " Problem updating the object id <obejctid> : ICF" The adapter used in sender agreement is WS ad
-
Is there anyway to have the caption come in separately from the photo or to add some kind of animation to it? Thank you in advance.
-
Ready to take the plunge, but dont want to face plant
Had this baby for 10 months. I thought before I tried to OC I'd post up and see what the Pro's have to say... have played with Core Center and NTune off the MSI site for my MB, dont like either. Core Center will clock to 2.4 stable, anything higher