Fixed headers while scrolling works fine in bids but not when deployed to reportserver
Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione
Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu
Similar Messages
-
Works fine in debug but not when published
So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
The code:
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
function slideNav(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.DOWN:
nextFrame();
break;
case Keyboard.UP:
prevFrame();
break;
case Keyboard.HOME:
gotoAndStop(1);
break;
case Keyboard.END:
gotoAndStop(this.totalFrames);
break;
When I test it using the debug (Ctrl+Shift+Enter) it works fine. When I publish it, the up and down arrows work but the Home and End keys do not work. They do nothing, no error messages, nothing.
Using Flash CS4 Pro 10.0.2. ActionScript 3. Windows 7 64-bit.
Any suggestions?
Thanks.Nevermind. That was stupid of me. Have to disable the keyboard shortcuts or it doesn't work.
-
I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.
-
The scroll function on my mousepad is disabled when viewing a pdf file in firefox version 5.0. The scroll works on the pdf, but not on the other tabs. When the pdf is closed, the scroll function returns to normal. Any ideas?!
Hey thanx for the help, it worked like a charm.
I think firefox changed the application lay out, as I used to be able to choose my PDF opener from the list at " Adobe Acrobat Forms Document' where I could choose Nitro-PDF reader, but it has now moved all the way to the bottom like you suggested to the obvious place of "Portable Document Format" section.
If someone didn't tell me , I wouldn't have scrolled all the way down to be able to find it... it really should be with all its cousins up the top...
Cheers again.. -
ITunes/Apple Mobile Device works fine w/iPod but not iPad
Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article? -
Query working fine in toad but not in forms 6i
i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
delete from fiaz.tmp_topten_prod;
for i in c1(:year,:month)
loop
insert into fiaz.tmp_topten_prod
values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
end loop;
standard.commit;
message('inserted in temp');
exception when others then
message (dbms_error_text);
message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman AfzalAs per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help -
Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!
Learning with Lynda.com!
Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
Thanks!Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".
-
Apple TV working fine with Wireless, but not on Ethernet
I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
I even upgrade to firmware 2.01Thanks for your help guys
I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda. -
Applet works in JDeveloper, but not when deployed to OC4J
I am working on an applet version of the BI Beans java client application. It works fine when running in JDeveloper (applet viewer), but fails when deployed to OC4J. The applet shows a red X, with a message in the status bar saying "Loading Java Applet Failed...". Contents of java console are as follows:
java.lang.NoClassDefFoundError: oracle/dss/selection/step/Step
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Any one have any ideas how to chase this one down?
Here is the message that JDeveloper shows when it runs the applet. I have gone thru this and ensured that all these references are selected in my .deploy settings:
C:\JDeveloper\jdk\bin\javaw.exe -ojvm -Xbootclasspath/a:C:\dev\jdev\Workspace1\TestClientApp\classes;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biaddinsrt.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biamlocal.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bicmn.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidataclt.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidatacmn.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidatasvr.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biext.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bipres.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bidata-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bipres-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\bicmn-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\biaddins-nls.zip;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\LW_PfjBean.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\share.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\jewt4.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\jlib\jewt4-nls.jar;
C:\JDeveloper\jdev\lib\ext\..\..\infobus\lib\infobus.jar;
C:\JDeveloper\BC4J\lib\bc4jmt.jar;C:\JDeveloper\BC4J\lib\collections.jar;
C:\JDeveloper\BC4J\lib\bc4jct.jar;
C:\JDeveloper\lib\xmlparserv2.jar;
C:\JDeveloper\jlib\jdev-cm.jar;
C:\JDeveloper\j2ee\home\lib\jndi.jar;
C:\JDeveloper\jlib\regexp.jar;
C:\JDeveloper\jlib\share.jar;
C:\JDeveloper\jlib\uix2.jar;
C:\JDeveloper\jdbc\lib\classes12.jar;
C:\JDeveloper\jdbc\lib\nls_charset12.jar;
C:\JDeveloper\j2ee\home\lib\ojsp.jar;
C:\JDeveloper\j2ee\home\jsp\lib\taglib\ojsputil.jar;
C:\JDeveloper\j2ee\home\oc4j.jar;
C:\JDeveloper\j2ee\home\lib\servlet.jar;
C:\JDeveloper\jdev\lib\ojc.jar;
C:\JDeveloper\jdev\lib\ext\..\..\..\bibeans\lib\olap_api_92.jar;
C:\JDeveloper\jdev\lib\jdev-rt.jar;
C:\JDeveloper\BC4J\lib\bc4jhtml.jar;
C:\JDeveloper\BC4J\lib\datatags.jar;
C:\JDeveloper\BC4J\lib\bc4juixtags.jar;
C:\JDeveloper\BC4J\lib\bc4j_jclient_common.jar
Any assistance would be appreciated.
s.l.i have the same problem
i cant load my applet on OC4J , i am wondering know how Oracle canot solve this problem -
Load swf works in Publish Preview but not when published
Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks
-
Podcast - works on iTunes page but not when subscribed
Hi, I produced my podcast, submitted the feed through iTunes store and was validated. However, it happens so that people can listen to the podcast on iTunes page but not when they subscribe to it and try to download. error points to URL issues apparently. Help.
It works perfectly well for me. On subscribing I saw all three episodes and downloaded and played Episode 2 without any problems. The only explanations I can suggest are that either some of your subscribers are having some sort of technical issue at their end: or that your server is intermittently sulking and failing to respond to requests. Try playing the episode from this link a few times on spaced-out occasions and see whether you ever get a failure:
http://thecricketcouch.com/CouchTalk/CouchTalk-AntSims-SanaKazmi-062611.mp3 -
Fixed header working fine for desktop but not for windows phone
I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
.header{
z-index: 3001;
position:fixed;
top:0px;left:0px;
background-color: white;
width:100%;height:150px;
This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
not visible but they are working if u manage to click at the exact place. Any fix for this?
I want to add that this problem is coming only in windows phone. So need fix for that.Hi User1508372,
The
Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
Windows 8).
The folks in the
Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
--Rob -
Device works fine with MAx but not with Labview visa serial
I have a Monarch rpm sensor hooked up to Monarch tachometer , it gives error while coding in labview and works fine in Max if the sensor doesn't read 0. I have written simple RS-232 programs never had an error but this one is giving errors ..not ablt to fix it..please help
Solved!
Go to Solution.No device can actually measure a speed of zero. It can only specify that the speed is less than some minimum, which depends on how long you are willing to wait for an answer.
I do not know anything about your instrument, but I would guess that you are getting an error which is the equivalent of "The instrument has waited the maximum permissible amount of time and did not detect any measurable motion." This is the instrument's way of saying that the speed may be zero, or very slow, or something is broken so that it cannot make a measurement but it cannot detect the problem.
Look at the manual for you instrument to see how it responds to the zero speed condition. This error may be normal. If so, you need to capture the particular error code and handle it however you think is appropriate.
Lynn -
I have some code associated with a Word Template. The template is opened, filled out and saved via a routing in vba. This all works fine in older 2007 version (which is version it was originally created in). Once this file is saved, the user can change the
date in a text box and re-save document. The code saves using the new date for part of new file name and then deletes that older file from the server. It fails at the delete function because the newer version of word is not dropping the file handle from the
first named file when user saves it to the new filename. In older version (2007) this handle was released as soon as file was saved to a different name. I can't seem to figure out how to release the old document filename so the old document file can be deleted.
I hope I explained this well enough.
Here's the code that woeked in version 2007 but fails in version 2010.
Option Explicit
Dim CAPEX01 As MSForms.ComboBox
Dim CAPEX02 As MSForms.ComboBox
Dim LocalPath As String
Dim NetPath As String
Dim OldPath As String
Dim OldPathNet As String
Dim DocName01 As String
Dim DocName02 As String
Dim DocName03 As String
Dim DocName04 As String
Dim DocName As String
Dim DocNameold As String
Dim TestDocName As String
Dim filesys
Dim newfolder
Sub AutoOpen()
ActiveDocument.ActiveWindow.View.Type = wdPrintView
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
End Sub
Sub AutoNew()
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
ComboBox1.Locked = False
ComboBox1.Enabled = True
FillList1
FillList2
End Sub
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
If Not TestDocName = DocName01 Then
Set filesys = CreateObject("Scripting.FileSystemObject")
If filesys.FileExists(DocNameold) Then
filesys.DeleteFile (DocNameold), True
'I get file permission error here
End If
End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
'''''''Document path functions''''''
Sub chkpath()
Set filesys = CreateObject("Scripting.FileSystemObject")
If Not filesys.FolderExists("\\yourPath\") Then
newfolder = filesys.CreateFolder("\\yourPath\")
End If
If Not filesys.FolderExists("\\yourPath\" & DocName01 & "\") Then
newfolder = filesys.CreateFolder("\\yourPath\" & DocName01 & "\")
End If
End Sub
''''''Save Function''''''
Private Sub CommandButton1_Click()
DocName01 = ActiveDocument.TextBox2
DocName02 = ActiveDocument.TextBox4
DocName03 = ActiveDocument.TextBox1
DocName04 = ActiveDocument.ComboBox1.Value
chkpath
NetPath = "\\yourPath\" & DocName01 & "\"
DocName = NetPath & DocName01 & "-" & DocName02 & "-" & DocName03 & "-" & DocName04
ActiveDocument.SaveAs2 FileName:=DocName, FileFormat:=wdFormatDocument
ComboBox1.Locked = True
ComboBox1.Enabled = False
ComboBox2.Locked = True
ComboBox2.Enabled = False
TextBox1.Locked = True
TextBox1.Enabled = False
TextBox3.Locked = True
TextBox3.Enabled = False
TextBox4.Locked = True
TextBox4.Enabled = False
DeleteOldDoc
End Sub
Sub FillList1()
Set CAPEX02 = ActiveDocument.ComboBox2
With CAPEX02
.AddItem "CASTING", 0
.AddItem "HOT ROLLING", 1
.AddItem "COLD ROLLING", 2
.AddItem "FINISHING", 3
.AddItem "PLANT GENERAL", 4
.AddItem "MOBILE EQUIPMENT", 5
End With
End Sub
Sub FillList2()
Set CAPEX01 = ActiveDocument.ComboBox1
With CAPEX01
.AddItem "A Name", 0
.AddItem "Another Name", 1
End With
End Sub
Private Sub CommandButton2_Click()
UserForm1.Show
End Submogulman52 and Don,
I went back and looked at my code and had already updated it to SaveAs in the new docx format. It still holds the lock handle in place until Word closes, unlike earlier versions which released the lock handle when you did a SaveAs.
As a note, all my Word and Excel macro-enabled (dotm & xltm) templates are read only and are never filled in, prompting the user for a file name on any close event or if they run the code gets auto-named. I do the SaveAs and concatenate the file name
from data on the document (or sheet) that has been filled in. During the SaveAs the docx gets saved to a network folder and also on a local folder. The lock gets renamed to the filename and remains until Word is closed.
So my code still fails at the point noted below while trying to delete an old filename version after the file has been saved as a new filename in a new folder. So....
The code is looking in the last folder where the docx file was saved for the older filename so it can be deleted. The newest docx version has already been saved in a different folder and has a new lock handle of its own. That lock is not my problem, it's
the older file lock which really exists in the same folder as the first filename that the docx was saved to. It does not release that lock until I exit Word. My work around has been to instruct all users to manually delete the older version file.
The other odd thing is this only happens when I run it from code, if you manually go through these steps with the SaveAs menu drop-downs in Word it will release the lock handle???
Hope this isn't to confusing and thanks for all your suggestions and help.
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
If Not TestDocName = DocName01 Then
Set filesys = CreateObject("Scripting.FileSystemObject")
If filesys.FileExists(DocNameold) Then
filesys.DeleteFile (DocNameold), True 'I get file permission error here- lock handle is still present from last SaveAs command in last folder where previous version of file was saved.
End If
End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
Glenn -
HTML Mashup works fine in Silverlight, but not in UI5
Hello community,
we are building an integrated Customer Service Management solution for a Client of ours, via the SAP Cloud for Customer platform (solution for Services).
Currently, we are trying to embed some external Business Process activities in our Service Tickets UI Screens, by using HTML Mashups. Our reference has been the standard Cloud Application Studio documentation, and some well-written articles here on the SCN, such as the following: HTML script mashup - launched from an Embedded Component by Vinita Sinha.
In our solution, the HTML Mashup has been connected via a Port Binding interface to the C4C UI Layer, in a way to pass it some relevant information such as the Ticket ID, the Customer ID and the Cause Category ID, as shown in the picture below:
We built a custom Port Binding object, but if you use the Standard "Ticket Information" port Binding (in category "Productivity & Tools"), the effect will be the same. The Standard Port Binding we used in the Mashup Authoring configuration floorplan is the following:
In addition, we discovered that, in our case, this Mashup development works just in Silverligh Web Interface, but not in UI5. While in Silverlight we are able to consume and correctly interact with our Mashup, in UI5 we can see just an empty pane stuck at the initial "Loading..." screen, as shown below:
We opened an incident with the SAP Support for our system, and we have been told to try to build the Mashup can work just with no Port Binding specified. Indeed, if we remove the Input Port Binding from the Mashup configuration, the screen seems to work fine even in UI5, as shown below:
Unfortunately, this technical constraint does not cover sufficiently our Business Scenario, because the Mashup should be initialized with our Service Ticket (and Customer) data.
Has anybody ever experienced this kind of issue? And how did you solve it? If it has no resolutions, is there available any possible workaround?
Thanks a lot for your contributions.
Cheers,
DavideHi Pragya,
thank you for the update.
Another question: could you please give us any reference about these corrections you told about? Maybe they could be relevant in our case too.
Our raised incident number is: 3100851983
Kind regards,
Davide
Maybe you are looking for
-
On my desktop on the dock, where the calendar app is, there is a rd circle with a 1 in it like the ones on iphone that show up for u pdates, I have never seen this on my desktop, does anyone know what it means? I don't think it is for an update?
-
Central Contract release in ME35K
In SRM a central contract was created and then distributed to SAP ERP ECC 6.0 Backend. In backend system a release strategy exists for the distributed contract. When trying to release this contract with ME35K the contract will not be found. Checking
-
Canon 5d mark iii camera raw files with CS3
Hi, I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3. I have looked at various plug ins but am struggl
-
I have a 2010 Macbook pro. A few months ago my laptop fell off a counter at work when I was out of the room. Since then, occasionaly my screen would go black and I would have to re adjust the screen and it would go back to normal. The bottom panel w
-
Why does the update icon always on my desktop photoshop elements 10 icon
why does the update icon always stay on the photoshop 10 icon on my desktop?