Fixed material code and quantity in every BOM

Hi All,
I have a requirment of adding a fixed material code to every BOM. This means that whenever the user creates a BOM, that fixed material comes by default with fixed quantity and the user will not be able to modify or delete that material.
Is there any way in to do this. Please advise
Thanks & Regards
SAPXPT

Hi,
i think sap standared not provide the same u need to do some exit .
Contact Abaper.

Similar Messages

  • Material weight and quantity report

    Dear,
    Do you know if in standard SAP exists a report able to extract the material good movements and the material weight field to?
    For example; something like the MB51 but with the weight field.
    Thank you
    Regards
    Matteo

    In SAP standard, movement data is stored in base unit and unit of entry. In Oil&Gas solution, you have table MSEG2 with the movement store in every unit of measure defined for the material. If you have this industry solution, you can access that information.
    If that's not your case:
    You may create a Query or custom report (custom program) with a calculated field to translate the quantity to the desired UOM.
    You can create an Info structure using LIS, where you update your key figures based on an update formula.
    You should be aware that above solutions are very different in terms that the first one will perform conversion using current UOM translation data, and the second one, will use the conversion defined at the moment of the document update. This means that if you change your conversion factors during a period, this may have different influences.
    Now, regarding the use of querys or custom reports, I have to say that querys are actually customs reports, dynamically defined using the query transaction. But once you generate it, an abap program is created. Sometimes, this type of generated programs have issues regarding performance, because this dynamic generation of the program, not always defines the better design for performance. As you might know, not every table is the same in terms of database access, and talking about material movements, I believe that the information to manage is quite large.
    Anyway, its true that you don't require abap programmer if you use query tools, but you have to take into consideration your particular business case to define the best approach.
    Hope this helps!

  • I have a invalid iTunes code and have tried every possible combination and it is still not working help

    Please help!!

    You need to turn the phone off and leave it in dry rice for 3-5 days. Then, plug it in and charge it for about 15 minutes and then try to turn it on. If it doesn't work at that point, it will be time to get a new phone.

  • Material Receipt and Payment Process

    Dear Experts and MM Gurus,
    my requirement is explained below.
    1.Material is received  and  goods receipt is made . initially Payment is made for Excise Duty  only.
    2. Material is posted to Stock with out any Value.
    3. Payment of material is based up on performance ,i.e number of heats it can with stand.
    eg: in po mentioned order is for 5000 Heats and cost per heat is 500 rupees. material code and ordered quantity is mentioned with Value . But This Value is used for only Excise Payment. Further invoices are paid based on performance report.
    Part payments are done based on the performance Report i.e number of heats material has acheived.
    how to work on this scenario.
    suggestions / comments are recommended.
    Thanks in advance.
    regards,
    injeti.

    Hi ALL,
    pl sugest/ comment on the above issue.
    Regards,
    injeti

  • Cross company unique material codes

    Hi all,
    Three years ago we implemented SAP R/3 for our five companies which belong to same group of companies. Therefore these company codes are on the same client. Recently we have implemented a new company code on the same client which is responsible for export  activities. This new company code buys goods from other company codes of the group and sells goods to export customers. We have been told by SAP consultants that we can use intercompany and cross company functions to operate these processes. The problem is, we have not planned these functions before, therefore the material codes are different in every company code. We have been told that material codes must be unique in every company code to process intercompany and cross company. Since we have five different company codes and thousands of materials, it is a huge work load for us to create these materials uniquely and delete older materials. What we would like to know is, is there any other way or method to operate cross company and intercompany processes even if the material codes are not unique?
    Best regards

    Hi Mertan,
    I dont think that is possible, for inter company or cross company the material should be unique but if you still want to do with different material name then I think you have to go for development. Discuss this issue with your technical consultant and ask him whether he is able to create a table in which one material is assigned with different name  and assigned it with one unique name. So when you will do the intercompany then system will check that table and identify the material.
    Hope it helps,
    Regards,
    MT
    Edited by: M T on Apr 22, 2010 1:49 PM

  • In order level no duplication of material code

    Hai Guru's
    Client requirement: In order level he is entering minimum 100 line items per order.Any duplication of material code came in same order on that time system has to taken to  that line iteam and changed the quantity .
    01    x      100 quantity
    02     y       50   quantity
    03     z       80  quantity
    when ever the  X  material come next time in same order i dont want one more line item. If I enter X material code in same order automatically  01 line item has to come .here i will change the quantity as a 150
    01    x      150  quantity.
    why because  its very difficult to find X material in 100 line items.Client strictly telling he dont want second line item as same material X.
    This is Standard SAP not possible if anybody face this type of situation before give me the solution how to face it . If any Development requires please tell me the logic.
    Thank u
    Regards
    Sree Sree

    Dear Sree
    My suggestion is specific to your comments
    when ever the X material come next time in same order i dont want one more line item.
    If I enter X material code in same order automatically 01 line item has to come .
    here i will change the quantity as a 150"
      whereby, if you follow the first suggestion, definitely it will work.  The end user has just to input the material code and execute.  System will automatically go to first line item of that material code.
    For example, you have maintained a material ABC in line items 50, 70 & 100 and in VA02, if you follow the suggestion what I have proposed, system will by default, go to line item 50 only, where you can make changes as per your requirement.
    On the second suggestion, as you said a sale order contains some 100 line items in which the material ABC is flowing in line item 20, 60 & 90.  What the end user have to do as a one time job is that based on material code, they have to sort the data in excel format so that in the excel sheet, you can see for material code with preceding tabs line items 20, 60 & 90 continuously. 
    Your job is to develop a BDC with just three fields of course, the input data has to be sale order reference.  The format can be
    Line Item:::::Item Code::::::Quantity
    If the end user would like to change the quantity of ABC for line item 60 instead of 20, in the BDC template, they have to maintain the line item as 60, material code ABC and quantity xxx.
    Why dont you make a try with the option cited first ?? 
    thanks
    G. Lakshmipathi

  • Excise invoice tab for without material code

    Dear all,
    I have created a PO with vat Condtion TAx code.
    There are 5 line items are there in this PO. There are no material codes available for this 5 line items. all the line items are account assignment related items.
    While doing GRN its asking the erro messgae like enter excise i nvoice no and date.
    That too its not asking for all the line items. some items its asking some of them items its not asking the excise invoice.
    j1id i have checked without material code and plant one line item will be maintianed.
    But my doubt is why its asking excise tab for the items. That too only one item  why its not asking the excise tab.

    We are using TAXINJ so there is no chance to go for material group wise.
    In j1id also i have removed the without material code one chapter id was maintained.
    any clue?

  • Problem regarding Duplicate Material Codes in SAP

    Dear Xperts,
    In our manufacturing plant,we are not using Split Valuation for same materials procured either from the domestic or from the imported Vendor.Even they are not using the same for the materials received through free of cost or through proper payment process.They are using two material codes and for this data redundancy occurred.Now they want to club the same into one material code but do not want to use Split Valuation till now.
    They want the following:
    1. For domestic Vendor they will follow Purchae Order.
    2. For international Vendor they will follow Schedule Agreement.
    3. They want only Delivery Schedule to be generated through MRP.No Purchase Requisition will be generated.
    But how to proceed.Is it possible?
    Plz advice.
    Regards,
    Soumick

    HI,
    But is it possible to generate only Delivery Schedules thru MRP?Means not to generate PR if we use both PO and SA for same material but for different Vendors?
    PR not generated for scheduling agreement only schedule line will generated as per define schedule in scheduling agreement
    ME31L = to Create SA document type LA or LPA
    Me32L = to change SA
    ME38 = to maintain delivery schedule
    assign scheduling agreement in source list ME01 and select indicator 2 MRP relevant and in material master in purchasing view select JIT indicator
    MIGO = to enter GR against SA
    MIRO = to enter IR against SA
    check following link
    [MRP To Generate SCHEDULE LINES for Scheduling Agreement;
    Regards
    Kailas Ugale

  • Asset material code

    Dear Expert
    in our system presently we open asset code through as01 and in the PO we select the account assignment category A but now we want to create material code for the asset PO i.e with account assignment category A and material code how it effect the accounting procedure as we will be having 2 master material code and asset code . Is it hit the accounting of the company ??
    Regards

    There are two ways by which you can create an Asset PO.
    1. Create a material code with material type asset, that you need to create by copying from materoial type raw material.
    Create a normal PO and purchase as if you are purchasing raw material. Once the material is in your inventory then issue to an asset using movement type 241.
    2. In the second process, get the asset number created by your Finance department  and then create a PO with Account assignment A. In this case as soon as you do GR the cost will automatically get allocated to an Asset.
    Hope this will help
    Regards
    Prabhjot Singh

  • Change Material Number and unit of measure

    Can we change material code and / or its Unit of measure . Please help

    http://sap-img.com/materials/change-base-unit-of-measure.htm
    Re: change material code
    Change of unit of measure

  • How to make material code field mandatory in VA01

    Dear all,
    I want to make material code field mandatory while creating sales order (VA01). As of now even if I dont enter material code , and just enter customer code and P.O. number ,  I am able to save my sales order.
    I tried to do it with incompletion log , but could not succeed.
    SHD0 could be an option, is there any simpler way out ?
    Please suggest.
    Regards,

    Hi,
    You have 2 options.
    1 - Incompletion Log
    If you add Material filed to your incompletion log, then when you try to save the sales order it'll give the "Save / Edit" pop up message. But then by pressing Save button you can save the sales order.
    If you want to avoid that pop up; do this. (To avoid user saving Incomplete sales orders)
    Go to VOV8 Tx.
    Go in to your sales document type
    Under "Transaction flow" section mark the "IIncompletion messages" tick box
    Then try with a new sales order without a material number
    If won't give that pop up message any more where as it'll always go in to the incompletion log. So you can't save it without maintaining the material.
    That's a alternative way of doing.
    2- SHD0.
    Best regards,
    Anupa

  • Quality Inspection not cominf for a material code

    Hi!
                  For a  particular material code,already there a quality view in material master.but it is not coming  for inspection in QA32.what i have to proceed further for bringing the material for quality inspection?
    -M.Suba

    Hi Suba,
    Try this.
    1.     Go to MM02
    2.     Put material code and press enter
    3.     Go to QM view
    4.     Click on Insp.setup. (It looks like solid rectangular tab)
    5.     Assign inspection type 01 if the material comes from vendor, else 04 for final inspection.
    6.     Ensure that you tick on u201CActiveu201D checkbox.
    7.     Save
    Do fresh GR. System will generate lot this time.
    Regards,
    Anand Rao

  • Default material code during material master creation

    Dear All,
               While I am trying to create any material in MM01 screen , system automatically takes a material code .So I have to remove that code from there then put my desired material code and then proceed .
                I want to know why system takes that perticular  code during material code creation .I want to remove it permanently .
                Please suggest what I have to do ?
    Regards
    Abhijit Das

    Dear Abhijit,
    Material Number range & Internal or external number range setting is done in SPRO under
    Logistic General>material master>basic setting>material type>Define number range for a perticular material type.
    Now if u want to have your own desired code go on above path,Select your material type & tick for external number range & give range of external number( interval).
    This will solve your problem,
    Vivek

  • How to define material code

    our's is a valve mfg co.  We are planning to go for sap.  In sap Max length of material code is 18 and description is 40.  But  our existing material code maximum length is 25 and description length is 120. 
    I want to know, Is there any other way that they will going to handle these type of material code and description.

    Yes that right the MARA-MATNR field is restricted to be 18 chars long. But this is a really big number as slong as you will not hide information into the number.
    The automative solution has a long material number, where a recalculation between a 18 digit to 40 digit will be done. Please check Service portal for this lonng material number solution.
    The field MAKT-MAKTX has 40 chararacters and represents a SHORT text.
    120 characters is very long. You can try to change the valid lenght as modification in SE11 on the data element.
    As a result you can enter up to 120 characters, but in most UIs the display will be cutted, but scrollable.
    This is a modification.
    But see we hav also a long text field for basic data text in the master data view.

  • No link between PR material and PO Material code.

    Dear Gurus
    My industry is textile industry , here issue is that when MRP run it is giving auto PR based on BOM , but when purchase department is received PR , they start analyzing material the material requirement , they check in stock any raw fabric is there or not , if available they send that raw fabric for subcontracting (for dying) then after dying sent for other different operations, and then required material as per PR is ready......
      Now my problem is how to link this auto material PR to different subcontracting PO... because management need report based on what was the material required and why purchase department is not able to provide it on time. please guide me....
    Thanks & Regards,
    Akshay

    Dear Sir ,
    I can not maintain special procurement key as 30 in MRP 2 view as it is not at all conform how material will be procure directly or by subcontracting...
    if i do like that in PO manually change ilem catagory L , but the is possibility that to get right material as per PR purchase has to do more that 2 times subcontracting at different vendor ....if this is the case the material code in PR and PO defiantly different.... will SAP support this that PR and PO item is different?
    Thanks & Regards,
    Akshay

Maybe you are looking for