Fixed telephone lines and names

Hi,
The recent updates to Skype have wiped all the names from my list of contacts to fixed land lines only. Skype contacts are still shown.
The telephone numbers are still there but the names have gone. Now I have lots of numbers in my list but don't know how to put a name to the number. When I click on the number it comes up as an unnamed contact.
Does this mean I have to phone all the numbers one by one to find out who the contact is.

Hi, dondovaston, and welcome to the Community,
You report a strange problem that I do not recall having seen previously.   
Please post back with the details of which version of Skype you are using, and on which computer/operating system and/or device.  I may need to arrange to transfer your post to another message board here in the Community so others using the same system may lend assistance to diagnosing and resolving this.
Thank you,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

  • Getting someone to fix your line and getting feedb...

    hi had a fault since since sun18th November reported it Monday since then had to complain as Bt missing supposed deadlines. I know it has been busy with the gales floods etc and have had deadline pushed back but new one also expired yesterday. Only received one SMS saying they will contact me today to let me know of progress ? After they intended to fix it? Seems a little odd to me. Is anyone else fed up of having to use their mobile running up bills and having to visit library and friends to do internet email etc. Am I alone in being fed up to the back teeth with the lack of service. I have complained twice via email for all the good it has done me. Then just to add insult to injury a BT Openreach went to one of my neighbours on tuesday but did not even visit my property.

    the Openreach engineer that visited to your neighbour would not have known of your fault there fault may have been older than yours as you have posted Openreach are currently very busy following the recent bad weather and repairs are being delayed and rescheduled daily
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How can I remove telephone lines and the like, on PS CC?

    Hi,
    I have done this already but for the life of me I just cant remember how I did it (it was just so easy!!!) and i cant find it in answers either.
    Please how do you do it?
    Thanks
    Serge

    Yes those can be used but with CC there is a neater way by simply clicking at the two extremities and pouf it goes away...
    But I dont remember how to do it
    Thanks
    Serge

  • Any fix for CC render issue with the new MacPro Firepro D700.  Getting lines and flicker as documented in threads

    Hi,
    We're facing some critical problems with our new MacPros, CC, and the Firepro D700's.   It appears that after we upgraded to 10.9.3 the D700's no longer work with Creative Cloud.  Our Premiere renders are full of artifacts, lines, and drop out.   Same issue as documented in RENDER PROBLEM - AME and Premiere Pro CC causing random horizontal lines on H.264 Renders     Can you advise as to when the fix will be pushed?  We have turned to "software only" render, which is killing us for time.  We have a huge amount of work that goes through 4 edit bays and its putting us days behind.
    Please let us know,
    Sincerely, Jim Janicek
    Janicek Media, Inc.
    720-891-6276
    [email protected]

    You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Also, this is an OPEN forum, not Adobe support... please do not post personal information

  • I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other. We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this

    I have two location one is Delhi(IP-192.168.100.*) and another is Mumbai(IP-192.168.1.*) and both are connected by MPLS line and ping with each other.
    We have one DC in Delhi location and domain name is CAPLDC and Delhi location all PC is member of this domain and working properly.
    now i am trying join the Mumbai location PC with my Domain(CAPLDC) but they are not join with my DC and generate the error.
    I have chek the DNS and nslookup all are correct but this is generate error. 
     Is this possible Mumbai location join with this Domain(CAPLDC)???
    One more thing when i have created another DC with this name (papldc.com) then Mumbai location is joined properly.
    Pls find the error message below and also find the attachment.
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "capldc" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "capldc":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.capldc
    The following domain controllers were identified by the query:
    capldcserver.capldc
    win-dyfq2poc88q.capldc
    However no domain controllers could be contacted.
    Common causes of this error include:
    - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses.
    - Domain controllers registered in DNS are not connected to the network or are not running.
    Pankaj Kumar

    Why are you using a single labeled domain? I would recommend renaming the domain name to be something like domain.com.
    Please refer to the articles below to fix your current issue:
    http://www.wincert.net/tips/networking/1614-cant-join-pc-to-a-domain-with-single-label.html
    http://www.itgeared.com/articles/1128-using-single-label-dns-names-for-active/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • BT Telephone line failure and cut off broadband mo...

    I am writing to complaint about BT service!.
    The beginning of July: I phoned BT because...., whenever I received phone calls from outside or overseas, or I phoned to my house from my mobile phon, I heard very bad noise. Morover, when someone phoned landline our internet line was cut off.
    BT operator answered that i would be fixed within 2, 3 days.
    26th July (Friday): I phoned BT again because the condition was the same. BT operator said the same answer the before. He said that ' Next Tue and Wed, our engineer would sor it out.'
    We went summer holliday from 27th July to 18th Aug.
    23rd Aug (Friday): I had to phone BT again because the condition was the same... not fixed.. BT operator said that "27th and 28th Aug, our engineer would ficed for you."
    5th Sep (Thurs) at 2:50PM: BT enginner came to my house and he cut off the broadband line without my permission.
    After that, I phone BT almost every day (6th to 11th Sep) what is going on??? However, BT operators didn't explain it to me any ditails.... THe said just excuse....
    12th Sep (Thurs): I phoned BT and BT operator said that one of their managers would phone me tomorrow(13th Sep Fri.).
    HOWEVER, NOBODY PHONED ME !!!
    13th Sep (Fri): I had to phone BT at 5:00PM. I was very very upset at that time, because we couldn't use any internet.
    BT operator said that BT would phone me around 3:00PM tomorrow.
    14th Sep (Sat): Finally, BT phone me at 2:50PM and BT operator (Female) said that BT obtain permission for digging from Council. Therfore, it would be fixed soon.
    I was waiting any progress information from BT until 18th Sep (Wed).
    18th Sep (Wed): I phoned BT at 1:00PM and BT operator(Prithika) said that BT engineer would come to my house at 6:30PM for fixing lines for me.  HOWEVER, HE DIDN'T TURN UP. (BT let me down again.)
    at 6:40PM: I had to phone BT. BT operator(Basba) expained it to me (excuse again!) then,
    at 7:00PM:   He put me through "Broadband Team' to temporary close the internet line to activate, but in vain.
    at 7:15PM:    He put me through "Technical Department". BT operator (Ranjeet) expained that there were 2 failures in my case.
    at 7:45PM:     He put me through "Telephone Line Department. BT operator (Vanshi) said I had to wait until BT is received the permission from council.. (I heard that BT have already obtain permission from Council!. BT told a lie to me.)
    19th Sep (Thurs):  BT(Sourajit) phoned me at 10:55AM. He said that someone would contact me around 1:30PM.
    at 1:00PM: BT (Jay) phoned me that BT hasn't obtained permission from council yet.
    26th Sep (Thurs): BT (Shrlini) phoned me around 5:00PM that the condition was the same as before. BT hasn't obtaind permission for digging yet...
    3rd Oct: BT(Sumshard) phoned me at 11:00AM that BT got permssion for digging (I can not trust what BT said any more)
    and 15:35PM BT(Amir who care team) phoned me that someone would contact me next Monday....
    4th Oct: BT(David) phoned me and he said that contractors didn't give BT any schedule. They said that it would be more than 5 weeks....
    We have used a Japanese broadband (NOT BT Broadband). We used BT line with the Japanese broadband. Therefore, BT doesn't care my problem. We can not use internet more than 1 month... We had to use a pocket FiWi which I had to top up £25 for 7GB X 7 times so far..... (my children needs to connect internet for homework, download etc...)
    I asked BT to use BT Wifi but I havn't used BT broadband. That is why they didn't support customer's care.
    I am very very upset... I had to keep paying the pocket wifi until BT fix the line..
    BT doesn't care the costomer's condition at all. Only care the customers who using BT products.
    I am very much upset this service... However, I have to use BT line after fixing it.... very sad......
    Millie Abingdon Oxfordshire OX14 5PT

    Hi mtpoweraoki1302,
    I'm really sorry about the fault with your line, please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and I'll be happy to look into this for you. You can find the link by clicking on my username.
    Thanks
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • IMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

    iMessage on MacBook Pro shows i'm my friend. My friend's photo and name shows in every conversation instead of mine. How do I fix this?

    I am using my own Apple ID.  (My father doesn't even have one).  I seem to recall having to select a contact or something to assign to my iMessage app when I used it the first time on my iPad.  I checked the settings and it is set to my apple ID and correct email address.  Any other ideas?

  • How do you get a list of your contacts nick names and their phone numbers on line and print them out?

    How do you get a list of your contacts nick names and their phone numbers on line and print them out?  I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site.  Does anyone know how to do this?

    Log into your online account. In the, 'I want to', box type, Manage Contacts.
    Place your cursor over any contact, a pop screen will appear with the option to print your contacts

  • I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

    I had this problem too, I fixed it by going to my settings and under general at the bottom there is a reset option, go there. One of the options should be reset network settings, select that one. I’m not sure why it happens but that worked for me; hope you have the same luck!

  • After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    After I synced my iphone (4S with ios 8.1.2) using itunes with MS outlook on my new PC , suddenly all my contacts without telephone number and what I have the name of the contact only ?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • Table Names ( for quotations , quotation lines and price breaks)

    Hi Experts,
    What are the table names for quotation, quotation lines and quotation price breaks.
    Thanks,
    MPH

    Quotes and POs share the same tables.
    The type_lookup_code in po_headers_all identifies the type of the document.
    Quotations > po_headers_all (or you can use PO_HEADERS_RFQQT_V)
    lines => po_lines_all (or you can use PO_LINES_RFQQT_V)
    price breaks => po_line_locations_all (or you can use PO_LINE_LOCATIONS_V )
    Hope this answers your question,
    Sandeep Gandhi

  • The display on my 4 year old iMac has horizontal lines and gradations of gray. Is my machine on its way out? Can I fix the screen?

    My four year old iMac has developed horizontal lines and gradations of gray over the last month. Is my machine on its way out? Is there anyway to fix the display?

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
    Genius Bar Reservation

  • When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this

    When i import my AutoCad PDF into photoshop my lines and text become blurry. How do i fix this?
    Is it resizing as I import it  or maybe a printer thing?

    It is rasterizing the PDF at the resolution you tell it to, unless it's an image only PDF - then the image will be opened as-is.

  • So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

    So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

    Hi Rahhh829, 
    Welcome to the Apple Support Communities!
    It sounds like you may want to get your iPhone evaluated for repair. Please review the following web link for information on the iPhone repair pricing and process. 
    iPhone Repair and Service - Apple Support
    Regards, 
    Joe

  • Can't fix jagged images and horizontal lines when scanning

    Hello, I just bought the HP Envy 5660 and it prints fine but scanning is horrible. I keep getting jagged and horizontal lines after scanning. They came out fine a few times but even on 300 ppi it looks bad. Please give me some advice. Thank you.

    Hello Hulkamania,
    Welcome to the HP Forums.
    I see that you are having some issues with the scan quality with lines and jagged images.
    I have seen this issue before and I was able to resolve it quit easily by doing one simple step.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Use the ON/OFF button to do a proper power cycle on the printer once it has been connected to a wall outlet.  This will do a Semi Power reset on the printer.
    Try another scan and let me know how it turns out.  Try multiple scans if you like.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Insert into Microsoft access 2010 Database on sharepoint using OLEDB

    Hi, want to insert data into a microsoft access web db using oledb object. but the i am unable to open the database.     dbLoc = "http://XXXX.com/project/design/Test_Web_DB     Dim strConnection As String = "Provider=Microsoft.ACE.OLEDB.12.0;Data Sou

  • Short dump using CS_BOM_EXPL_MAT_V2 with different user ids

    Hi We are getting a short dump in our program when using FM'CS_BOM_EXPL_MAT_V2' and this is happening only for super user roles but not with regular user ids in production. We are not able to identify the solution yet, and it needs to be resolved as

  • MSS - Approval of working time

    Hi As a manager (MSS) i am getting three option when an emp(ESS) submits working time, viz, approve all, reject all, resubmit all. I want to delete the resubmit all option. I have checked in R/3, the documentation says that this entry is defaulted by

  • How to make flash animation using images

    Hello all dear, please give me solution of my problem please look at the headline

  • Changing column positions of a table

    Hi Please lemme know how do we change column postions in a table Table A ( x number , y varchar2(10), z number) How do i make it A (x number , z number , y varchar2(10)) Thanks