Fixed Top Margin for Web Report

Report generated with Htmlcss, we had setup the Top Margin of Page to 0.5
First Page Top Margin is 0.5 but the second page takes the Top Margin more than 0.5 (could be 1").
Any help would be much appreciated.
TIA

Are you sure that you set the bottom margin to be 0. Assuming you aren't using page streaming, the gap between the pages is the sum of the top and bottom margins.
Hope this helps,
Danny

Similar Messages

Authorizations for WEBI report based on BPC data model

Hi All,
We are strugelling with setting up authorisations for the reporting on BPC data model.
We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
Kasia

Anybody can help with this issue please?

How to make Management of row level restrictions easy for webi reports?

Hi all
Our BO Product version is 12.3.0.601 (BO 3.1)
We are applying row level security for webi reports at universe level...
Since Universes are more in Number we have to create same restrictions and apply it to the users lets take a restrictions on region....which is common across all universes.
So the problem lies with the management of restrictions created at universe level.
Can we have a setup in where we can centralized the restirctions at a place so that management would be easy ......???
Shall we have to import the roles(restrictions) from R/3 or BW or Database level...?
Then how we will restrict our report (webi) to a region?????
So basically webi reports should run with the restrictions lets say region....How we will achieve this?/
Thanks and Regards
Ritu Raj

Hi,
what is your Datasource?
If its SAP BW i would highly recommend you use the SAP Authentication in your BOE XI 3.1 So the users log into BOE with their SAP Username and Password and than the Data restriction of your BW takes place when the users run their Reports.
Informations on how to confiure the SAP Authentication you will find in the installation Guide of the SAP ITK.
Regards
-Seb.

Setting different top margin for first page

I have been trying to set a 5cm top margin for the first page of a thesis chapter and a 2.5 cm top margin for the rest of the pages to conform to requirements. I have set a section break and gone into Inspector to make first page different but I still get any margin changes on the first page through the whole document. I do what HELP says but it isn't working. Anyone help me out before I go troppo?

The easiest way to do this, especially if all the text ina particular chapter is in the same section, is to just set the 'before' value in the Layout Inspector. As text flows from one page to the next, it will conform to the global setting. If you insert a Section Break, the new section will start on a new page and the first line will be down the same amount as your initial chapter page. If you insert a layout break it will also be moved down that initial amount.
If you want to capture this behavior you can capture multiple pages to use as well. Some of the preset templates have multiple pages where the first page has different characteristics than the subsequent pages added when oyur text overflows from the first page.

Change File Name In The "File Download" Dialog Box For Web Reports

Hi All ,
I followed the below note to change the "File Download" name.
How To Change The File Name In The "File Download" Dialog Box For Web Reports? Doc ID: Note:418366.1
However its not working. Has anyone tried this and works fine ?
Basically I wanted to change the name "rwservlet" when a report is run in an
excel format.
Rajesh Alex
Rajesh Alex

Hello,
Have you checked if a HTTP header "Content-disposition" is returned ?
You can use ieHTTPHEaders for IE
http://www.blunck.se/iehttpheaders/iehttpheaders.html
and
Live HTTP Headers for FireFox
https://addons.mozilla.org/en-US/firefox/addon/3829
Regards

Which folder i have to put my .jsp file for web report?

for web report(not the paper report) i put my .jsp files in the
\reports\j2ee\reports_ids\web
folder
this is for the DS(Developer Suite)
i'm trying to move this file to different machine where AS(Application Server)
is installed.
but couldn't find above path. where do i have to put .jsp file for
web report?
or do i have to modify in the registry? if so, where?
Thanks

Hello,
Take a look to the thread :
where to add new jsp reports directory location in path
"...You have to keep jsp files under document root that is OH/j2ee/OC4J_BI_Forms/applications/reports/web directory. You can create sufbolders under this directory and keep jsp files. ..."
Regards

Execution time for web reports

Hello every one,
How to calculate execution time for web reports, for query execution we will go through RSRT, by giving query name and press execute + Debug button then select statistical data & Do not Cache buttons then press enter, after getting output press on back button, we will get duration of the query.....
But my question is , can we calculate execution time for webreport, if so can you please guide me.
and can you also tell me , if there is any RRI for one report, how to calculate execution time for these queries.
Ex : Query ABC have XYZ as its drilldown report , i need to calculate execution time for XYZ report via ABC report.
Thanks in advance,
Best Regards.
NP.

Hi,
For reports executed in java web you can add the parameter &PROFILING=X
to the URL in order to record the execution time. Please have a look at SAP note 1048691 for further information.
Best regards,
Janine

Prerequisites for webi reports 4.0 to view in Mobile

Hi,
Please can anyone provide me the details regarding Prerequisites for webi reports 4.0 and design studio 1.2 (like Server requirements,Bo Mobile requirements,supported components ) to view in Mobile .
Thanks in advance,
Regards
Sushma

Did you check the admin guides (available here: Business Intelligence – SAP Help Portal Page) ?
For example,
Design studio: http://service.sap.com/~sapidb/011000358700000146402014E/ds12SP01_admin_bip_en.pdf -Chapter 5.4

The action cannot be performed error for Webi Report

HI,
I am getting the error The action cannot be performed error for Webi Report. I am getting this error after i save the report and open it again.

This is happening for only 1 particular report. In the end i removed some of the objects from the query and added some new ones.
Strangely it worked!

RRMX for web report?

Hi,
Just busy defining authorizations for web reports based on BEx queries. In the role is the S_TCODE=RRMX REALLY needed? And if so does that entail that the users can use BEx query designer as well?
Thnx for thinking.

Thnx.
Do you refer to the "change local/global definition" in "excel" via the BEx query designer? Because that is the functionality that I would like to restrict, web access only.
By different "auth objects" you refer to the S_RS_COMP etc?
Thnx in advance.

Documentation for Web Reporting

Hi All,
Is there any documentation available for web Reporting...if so please let me know...
Regards
srinivas

Hi..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/828d9590-0201-0010-95a7-ea8cf8814b94
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d8eee909-0701-0010-9b88-c8431b5f1ce5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49dfeb90-0201-0010-a1a2-9d7a7ca1a238
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdfbb990-0201-0010-d78b-81e475fc1010
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8f742499-0701-0010-ca98-a15ee9eec03e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a751d990-0201-0010-55b3-8b83d9afbd9b
<b>https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9a444d6e-0901-0010-93b6-a3b2415f8188
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad0a4b07-0301-0010-5095-ef7615676fc0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bda556e9-0c01-0010-83b0-d519d6deb9e9</b>
Message was edited by:
search

Changing default page margins for Web Intelligence

Is it possible to change the default page margins for new Web Intelligence documents. The default size is 76px which most people find exceedingly large.
The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc. Can anything be done to this file to change the default page margins as well?
Any help would be appreciated ...
Thanks

Hi James,
Following information might be helpful for answering your queries.
An ER has already been raised for the functionality yo want and the ER# Id is ADAPT01081135
State
Submitted
Origin
Customer
Date Entered
2008-05-23 12:29:54
Subject
XIR2: Webi: Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Current Functionality
The default 'Page Layout Margins' are set to 76px each for a new Webi report.
Create a new Webi report - Go to Page Properties - Page layout - By default, Top margin=76px, Bottom margin=76px, Left margin=76px, Right margin=76px.
Requested Functionality
Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Expected Added Value
There should be an option in Webi / Infoview to set any property value to any required default value. This should be independent of the user, because it may differ from user to user.
Found In Product
Business Objects Enterprise.
Found In Product Version
XIR2.
Found In PFA
Web Intelligence
B) use SDK kit (this is only a suggestion though)
https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary
https://boc.sdn.sap.com/codesamples
You would find almost everything here that BusinessObjects supports (about the SDKu2019s). You could also use the forums to check if anybody have already done what you are looking for)
Regards,
Sarbhjeet Kaur

Error in MDDataSetBW.GetCellData for WebI report on SAP BW

Hello All,
I am getting below error when running a WebI report (BOBJ XI SP3) on top of a universe built on a SAP BW BEx Query (SAP BW 7.01 Level 0007).
"A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please enter a valid value for characteristic ZPRODCODE.. (WIS 10901)"
I observed that
1. Error is coming only with more number of restrictions in selection criteria.Without those selections ( as they are optional prompts ) data is coming properly with all 950 records. So as mentioned in old threads huge data is not an issue here
2. Error is coming only when data is not available in cube for the given selection criteria after taking long time.
Any idea why error is coming instead of report throwing No Data to retreive.
Vamsi Ch

Hi,
There are couple of threads around this issue. Go through the below links and hope you might get the proper info.
error MDDataSetBW.GetCellData
Error in MDDataSetBW.GetCellData (WIS 10901)
Webi throwing error MDDataSetBW.GetCellData
Re: Error in MDDataSetBW.GetCellData
-Noor.

Filter condition for Webi report scheduling

Hello,
I have a Webi report with a query that has one filter (it states the starting and ending date of data to be displayed in the report). This report has to be scheduled but it has to contain different filter values each time the report is run.
I'd like to know if there is a way to schedule this report taking into account that each iteration of the scheduling process has to use different values for the filter.
On the same way, the Webi report has a XY diagram with a text title made up of a fixed literal label. Is there any way to inject the text title from the scheduling process (in order to avoid editing the report before each scheduling iteration occurs)?
Thanks a lot!

Victor,
one filter (it states the starting and ending date of data to be displayed in the report). This report has to be scheduled but it has to contain different filter values each time
There are a couple of ways to handle this requirement, depending upon other environmental factors. Here is one method, but it requires the ability to update/change data at the database using an external tool (anything that permits processing transactional information).
You can set up an additional table with two columns: starting_date and ending_date
Someone updates the additional table as appropriate before the next run will kick off in the schedule.
The tricky part is in getting your current report to incorporate the other table, and for this you may need to either create a view in your database or a derived table in your universe. Here is the rudimentary SQL structure that might work for you:
create table start_end_dates (beginning_date datetime,end_date datetime)
go
insert into start_end_dates values ('9/1/2009','9/30/2009')
go
create table my_data (col_a char(1),month_id datetime)
go
insert into my_data values ('a','9/1/2009')
insert into my_data values ('a','10/1/2009')
go
select *
from my_data
where month_id >= (select beginning_date from start_end_dates) and
month_id <= (select end_date from start_end_dates)
The start_end_dates table is the one that receives a single input, populated with the starting and ending date of data. The "my_data" table is an example of how the source table can call in the "parameters" of the "start_end_dates" table to fulfill its quest for filtering (additional filtering on other things within your scenario can also be applied).
Once you can get the mechanics of the SQL to work for you (either in the universe or a view), then you can set the report up to work hand-in-glove with the above structure. In the report, you can either have a second data provider that selects on the "start_end_dates" table, storing that data in the report and displaying it somewhere, or you could use the min(month_id) and max(month_id) concepts and display that somewhere too.
Thanks,
John

Question for webi reports

Hello expert,
         I have some questions as follows:
   (1) I want to design a webi report without drill down operation, how can I deactivate drill down feature?
   (2) I want to use a colunm to represent the number of rows by some group criteria, such as for year 1999, number of rows by the year is displayed, how do I formula this column for the number of rows?
   (3) I am not sure if I drill down on some block, drilldown operation will be effective in another block of the same report?
Many Thanks,

Howdy bo zhang,
1. Click the drill button up in the top right in the Tool bar when editing the report.
2. =Count([[Date]]; All) In ([[Year]])
3. in InfoView, click preferences in the top right. Expand the Web Intelligence section. There's a tick box for 'Synchronise drill on report blocks'
For number two, read up on 'input and output contexts' in the webi functions manual: http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_webi_ffc_en.pdf
DG

Fixed Top Margin for Web Report

Similar Messages

Maybe you are looking for