[fixed] Touchpad suddenly not working on Acer Aspire 5670
I am using gnome 2.28 and i never had any problem with my touchpad: I actually cannot recall having updated before this issue came out..... just, suddenly, the touchpad is not working... no movement, no clicking... nothing at all.....
I am using an external useb mouse........ i am also using hotplugging (no xorg.conf).... any idea? Not having mouse is quite frustrating
Last edited by Xi0N (2009-10-29 12:40:11)
that's odd..
does the touchpad works on login screen?
(mine did it there, but no in the desktop)
is it enabled in Bios option?
did you try erasing and re-installing xf86-input-synaptics?
pacman -Rsn xf86-input-synaptics, and then pacman -S xf86-input-synaptics
just giving you ideas.. 'cause i don't know what can be the cause
ps: did you read this wiki? http://wiki.archlinux.org/index.php/Touchpad_Synaptics
Last edited by palinux (2009-10-24 03:21:40)
Similar Messages
-
[ALSA] surround 5.1 not working on Acer Aspire 8943G
My laptop Acer 8943G has a ALC670 Realtek chip.
And it has built-in Dolby Home Theater 5.1 Cinematic Surround.
My problem is that I can't bring all the 5 speakers + subwoofer to work.
I'm using gnome3 (gnome-shell). In pulseaudio I see only surround 4.0, so speaker-test -Dsurround40 -c4 is working great and -Dsurround51 -c4 too but not with -c6:
[_artem_@linux-void ~]$ speaker-test -Dsurround40 -c4 -twav
speaker-test 1.0.24.2
Playback device is surround40
Stream parameters are 48000Hz, S16_LE, 4 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 32 to 8192
Period size range from 16 to 4096
Using max buffer size 8192
Periods = 4
was set period_size = 2048
was set buffer_size = 8192
0 - Front Left
1 - Front Right
3 - Rear Right
2 - Rear Left
Time per period = 5.717822
0 - Front Left
^C
[_artem_@linux-void ~]$ speaker-test -Dsurround51 -c6 -twav
speaker-test 1.0.24.2
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Channels count (6) not available for playbacks: Invalid argument
Setting of hwparams failed: Invalid argument
[_artem_@linux-void ~]$
as pulse audio has no 5.1 profile for my hardware I decided to remove it completely, so I did.
now I have just alsa: speaker-test -D default -c6 -twav gives sound only on front-left, front-right, but it gives no error on hwparams
Yesterday on pulseaudio I got speaker-test -c6 -twav to give sound on all the speakers including LFE (subwoofer).
But that worked only with speaker-test, sound settings of gnome still gave me 4.0 profile where I could test only 4 channels.
That's why I wanted to play all the sounds directly through alsa without pulseaudio.
here is alsa-info
http://www.alsa-project.org/db/?f=4467f … 7f061397cb
here is alsamixer:
it has no options for channels, only FRONT (left-right) and SURROUND (left-right) no other controls, no LFE, no CENTER, nothing.
the last thing I tried:
[_artem_@linux-void ~]$ cat .asoundrc
ctl.jack51 {
type hw
card 0
device 0
pcm.jack51 {
type asym
playback.pcm {
type plug
slave.pcm "surround51"
slave.channels 6
route_policy duplicate
capture.pcm {
type hw
card 0
device 0
[_artem_@linux-void ~]$
[_artem_@linux-void ~]$ sudo jackd -d alsa --device jack51 --inchannels 2 --outchannels 6
jackd 0.121.2
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
creating alsa driver ... jack51|jack51|1024|2|48000|2|6|nomon|swmeter|-|32bit
ALSA lib control.c:882:(snd_ctl_open_noupdate) Invalid CTL jack51
control open "jack51" (No such file or directory)
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM jack51
ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM jack51
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
cannot load driver module alsa
[_artem_@linux-void ~]$
I read already almost all the manuals but can't get it working, I played with default.pa, daemon.conf (both with pulseaudio) + .asoundrc
now since I delited pulseaudio completely, I tried everything with .asound + /etc/modprobe.d/alsa.conf (setting default card, manual setting the model) but nothing works.
I hope you can help me, because I have no idea what to do next
Last edited by _artem_ (2011-07-02 13:13:27)I tried all the models from HD-Audio-Models.txt
ALC662/663/272
==============
3stack-dig 3-stack (2-channel) with SPDIF
3stack-6ch 3-stack (6-channel)
3stack-6ch-dig 3-stack (6-channel) with SPDIF
6stack-dig 6-stack with SPDIF
lenovo-101e Lenovo laptop
eeepc-p701 ASUS Eeepc P701
eeepc-ep20 ASUS Eeepc EP20
ecs ECS/Foxconn mobo
m51va ASUS M51VA
g71v ASUS G71V
h13 ASUS H13
g50v ASUS G50V
asus-mode1 ASUS
asus-mode2 ASUS
asus-mode3 ASUS
asus-mode4 ASUS
asus-mode5 ASUS
asus-mode6 ASUS
asus-mode7 ASUS
asus-mode8 ASUS
dell Dell with ALC272
dell-zm1 Dell ZM1 with ALC272
samsung-nc10 Samsung NC10 mini notebook
auto auto-config reading BIOS (default)
and I figured out that only this do something in the right direction...
[_artem_@linux-void ~]$ cat /etc/modprobe.d/alsa.conf
#options snd-hda-intel model=3stack-6ch
options snd-hda-intel model=3stack-6ch-dig
#options snd-hda-intel model=base
#options snd-hda-intel model=eeepc-ep20
[_artem_@linux-void ~]$
here is how the uncommented model looks like in alsamixer:
so I now have CENTER and LFE that are missing in the default alsa config (screenshot in first post)...
but speaker-test
[_artem_@linux-void ~]$ speaker-test -Dsurround51 -c6 -twav
speaker-test 1.0.24.2
Playback device is surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 5440
Period size range from 32 to 2720
Using max buffer size 5440
Periods = 4
was set period_size = 1088
was set buffer_size = 5440
0 - Front Left
4 - Center #silent
1 - Front Right
3 - Rear Right #silent
2 - Rear Left #silent
5 - LFE #silent
Time per period = 8.522361
rear left and rear right are always silent on model=3stack-6ch-dig even if I pass to the speaker-test -c4, on another model=*** with -c4 I could here all 4 speakers, but on -c6 only front left and front right (weird because they work on -c4 but on -c6 they are silent...)
if I set in alsamixer Channel Mode to 2 instead of 6, the above command gives me hwparameter error, so it's correcter than before because it can't play 6 channel on a "set to 2 channels hardware".
but I don't still know how to get "center", "rear-*" and "lfe" to give sound.
Maybe you know another models (names) that I can try. I have googled on alc670 alsa models but can't find anything related... one thing (saw in a patch diff that it's quiet "equal" to alc622 and alc272 that's why I tried all the models from above. and some of them are at least visually correcter than the default alsa detection: I mean they give me the correct parts (lfe, center), default one gives only Front and Surround).
p.s. I recompiled kernel with alsa support other ways I wasn't able to compile alsa-driver manually and had no cards to try different model options, because there was no kernel module for snd-hda-intel... -
Suspend not working on Acer Aspire One AO751h
Hi everyone!
New forum user here
So, I did a fresh install of Arch on the Aspire One AO751h. I worked out pretty much everything I need except the suspend function. I have 2 main problems with it:
A- If I close the lid, the netbook enters immediately suspend mode but there is no way to wake it up except by unplugging every power source and booting again.
Same result if I use
pm-suspend
B- If I try to enter suspend mode using Fn+F4, nothing happens.
Regarding point A, I already read https://wiki.archlinux.org/index.php/Ac … wer_button;
I didn't flash the bios because I don't actually need the suspend to work with the lid: I just want it to work from terminal or keyboard shortcut, so I prefer not to mess with the bios.
And I don't feel like using the custom kernel for aspire one because it's more than 2 years old.
Any other solutions?
Thank you in advance for your help!
Giacomo
ps: sorry for my poor english, non native speaker.Of course within a couple of hours of this post I figured it out.
I went to /etc/conf.d/gpm and added "-2" for two button mouse.
GPM_ARGS="-2 -m /sys/devices/platform/i8042/serio2/input/input8""
Now I can paste by simultaneously clicking the left/right buttons.
rs -
Battery not working on Acer Aspire V5
I got a strange one here - I was working on the computer changing the hard drive and I wanted to turn the power off. I held down the power button but the fan was still spinning (looking at the bottom of the computer). I figured because the fan was still spinning that the power was still on, so I held the button to force the computer to turn off, but the fan kept spinning. Finally I just flipped it over and realized it was off, so maybe the fan just keeps spinning even though the power is off to cool down the CPU? Also think during this time that the power cord was unplugged, but I'm not totally sure... Anyways, took the drive out, put it back in, then powered the system back up. I noticed there were no sleep options when I was trying to change the "close the lid" settings which I thought was kinda strange. Then I pulled the power cord out and the computer just turned off entirely. I don't know what happened to this thing. If I plug the cord in the charge indicator stays amber for about 5 seconds and then goes blue as if it's fully charge. Windows reports that it's fully charged, but it will not turn on without the power cable and will immediately shut off if I inplug it. So did I do something wrong by holding the power button down for so long? I even tried taking the CMOS battery out to see if the BIOS would reset, and also upgraded the BIOS to the latest version. The computer was working great on the battery before - does this seem like a motherboard problem or a battery problem?? Thanks!Mike
Hi Justin,I'm not sure which one as I gave it back to my girlfriend - fortunately buying a used battery fixed the problem!! I was so worried that there was some weird error with the charging circuitry on the motherboard. Thanks for getting back to me! Mike
-
HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working
Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Touchpad is not working properly on Satellite L30-X10
Hi to all of you.
I've got the following issue: On my notebook the scroll on the touchpad is not working. If somebody can tell me how to fix this problem it would be kindly appreciated.Hi,
I am not sure if this can be a good solution but maybe its worth to try it:
1. Download the latest touchpad software from here:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
2. Remove the old software
3. Reinstall the downloaded software
4. Go into your mouse properties and check if everything is configured (especially the scroll function)
Give some feedback in case of further questions..
Cheers -
Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Rules set in mail are suddenly not working?
I had my rules set in mail and now they are suddenly not working, what to do to fix?
I'm having the same problem, but not with all messages. Only a few slip through. However, when I right-click and Apply Rules to individual emails, the rule suddenly works.
What I'd like to work (and it doesn't), is to be able to select-all emails in inbox and then right-click, Apply Rules. But this never works. AND it'd be must faster than doing it individually. Thx! -
I purchased this Toshiba Satellite C55D-B5102 last week, I installed Windows 10 last night. After installing Windows 10 the touchpad did not work. I have since fixed that issue. However, now the buttons for the touchpad are not working and I'm unable to find a solution to this issue. I am able to use a wireless mouse for functionality, so that helps, however, this is a very hindersome problem... Any guidance would be much appreciated.
Hi I´m not sure if this gives any guide but this what I have done to "Win 10 + touchpad problems". I have a Satellite P30 W-B which is brand new. I installed Win 10 yeasterday and my Touchpad didnt work any good after that, I only had the cursor function and a click function working, no right click or so. I checkad all possible solutions here and there and what I finally did was to uninstall the ELAN tocuhpad driver and a ree-start. I thought the touchpad would be dead after that but it works fine! Now its a MS softwere instead automaticly, quite old. Now it works like before. THe ELAN driver came with he Win 10 package. I might have lost some functions incoperated in the ELAN driver like scroll or so but I wont install any new driver unless its working properly with Win 10 so I can wait for that. I hope this can be something for the moment.
-
HP G62 touchpad scroll not working after Windows 10 update
Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix? Best,
Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10. I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently. Have a great day! -
Touchpad scroll not working after Windows 10 update
Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix?
Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10. I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently. Have a great day! -
Touchpad does not work even after format - x220t
Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
stevexyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1 -
Help! My MacBook is all of a sudden not working past the login page. A white screen comes up that I cannot get rid of. I attempted a safe start up and that failed as well. It's a white screen where I have a mouse and when I click the volume buttons I can hear it working but nothing else just white. Please help.
Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)
-
Hello:
I have a Mac running OS 10.8.5 and I use Acrobat Pro and Acrobat Reader. Today for some reason, any time I try and access a pdf file from a web page, it won't open. I get a blank window. PDF files already on my computer open fine and I can create PDF files from Word docs, but I can't download or view any pdf file from any web page. Strangely, PDF files on web pages open just fine on my iPhone.
I checked that both my copy of Acrobat Pro and Acrobat Reader are up-to-date. They are.
I checked that my copy of Firefox is up-to-date. It is. And nothing changed with Firefox within the last 24 hours.
I am a humble computer end-user. I am baffled as to why this would suddenly not work. I have not changed any settings, etc. Any help or suggestions would be greatly appreciated.Thank you.
I checked your instructions you sent and as far as I can tell all of my settings, etc for Firefox (plugin updates and preferences) are correct but I am having the same problem.
However, everything works in Safari. I don't have time to attempt to diagnose why Firefox no longer works. I will just switch to Safari.
Many thanks.
Charles
Charles Deister
(503) 949-5762
[email protected]<applewebdata://81CB4171-226F-49DF-BD59-A38A7360B3FB/[email protected]>
PO Box 5032
Salem, OR 97304
http://www.pilotstrat.com<http://www.pilotstrat.com/>
This transmission (including any attachments) may contain confidential information, privileged material, or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful. -
ITunes on my iPhone 5 is suddenly not working.
iTunes on my iPhone 5 is suddenly not working. Updated to IOS8.0 (not running 8.0.1) a few days go but was fine up until today. Now, when attempting to play a list of songs (artist, playlist or album) it rapidly shuffles through all of them without playing and then it displays a red square next to songs and won't play them at all. It seems to sync with my MBP but then new playlists I've created don't appear on the iPhone even though iTunes on the MBP has them appearing when I click the "on my iPhone tab. Tried the obvious quit and restart approach. No effect. Does anyone have any ideas?
It's not a hardware problem. The same exact thing just happened to me. My husband reset all settings, not erase all content and settings, after the phone started back up, everything worked like normal again. You just have to redo your settings.
General>Reset>Reset all settings
Hope this helps you!
Maybe you are looking for
-
Phone numbers are no longer showing up on my email and text as links to call
Phone numbers are no longer showing up in my messages and on my emails as links so that I can call the number directly.
-
Error on opening links in Firefox from email in Thunderbird
Using Windows 7 sp1, 32 bit. My default browser is set to Firefox, and all http or https links from any program are opened in Firefox. There is no problem doing this from any program except from Thunderbird. It's fine if Firefox is not already open,
-
10.4.11 Just updated Java...browsers were quit...permission fixed etc..rebooted...cannot access American express website or Apple log in using Firefox. Safari works for some, but not AMEX. Web and Mail also now hang intermittently. How do I get back
-
Setting up FreeRADIUS and eDirectory for 802.1X Authentication
Not sure how many people know about this, but I sure didn't. Novell actually has a TID on how to set all of this up. Just thought I share this with you guys. Might just help someone out there. http://www.novell.com/support/php/se...200%2083136239
-
How can we findout the technical name and short,long description of an infoobject?. Regards, Srinivas,