Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010).  In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010  but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied.  But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document.  Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

Similar Messages

  • Data Extraction (Line Item Level) FI/CO

    Hi expert,
    Exp:the datasource 0FI_GL_4 is Data Extraction (Line Item Level) FI/CO.
    From sap help doc i kown that delta records are directly transferred to BW. No record is written to the BW delta queue.
    But i run rsa7 in ecc, the delta queue list had the 0FI_GL_4,moreover,it had many records in it,then i run delta in bw side the
    record is cleared
    I was confused about it,why the delta queue had many records in it?

    Hi James:
    Please refer to the presentation below:
    "Data Extraction (Line Item Level) FI/CO"
    https://websmp102.sap-ag.de/~sapidb/011000358700007881242002
    Regards,
    Francisco Milán.
    PS. Since the document is available on the SAP Marketplace you'll need an "S" account.

  • How can I add the expiration date at line item level

    My User is selling voucher. The voucher is sell at line item. eg GV$5, GV$10,etc
    Each voucher line item sold need to be entered with a EXPIRATION date of that voucher.
    Maybe 3 months from issue, maybe 6months/1 year from issue.
    How can I add this to the sales order line item level?
    Which field can I used and how to configure?

    Hi Colin ,
       The question is not very clear , but i assume that you are asking about the  self expiry date of the particular material ,
    1. The setting you can do by activating  shelf life data  in material master :Plant data/stor1
    2.  its better to have a batch managed material for that you can sort the material acording the self expiry date.
    3. Once you maintain self expiry date system by default pick  the material at the time of  delivery
    Note-Shelf life expiry it will give the life of the material from the day of manfacture,remaining shelf life also will  give .
    Hope it is helpful
    Best regards
    Venkat

  • Billing date at line item level in a sales order

    HI!
    Can anyone let me know the significance of billing date being present at the line item level in a sales order?
    And why does it get changed as per the Requested delivery date if the Prop. Pricing date in the maintanenece of sales doc type is set  as 'A'?
    Can it be different for different line items?

    Hello Asha,
    Can anyone let me know the significance of billing date being
    present at the line item level in a sales order ???
    The comprehensive information is available at SAP technical help(F1) for the "BILLING DATE" field at Sales Order line item level...Before raising these type of questions, i would urge to  conduct initiate analysis and then post at SDN forum if you are unable to find out answers...For your quick reference, i have extracted the same description for Billing date from SAP techincal help (F1) and pasted below.
    Billing date for billing index and printout
    +The date on which the billing is processed and booked for
    accounting purposes.+
    Use
    +You can use the billing date as one of the selection criteria
    when you process billing documents collectively.+
    Procedure
    +If invoice dates are defined for the customer, the system proposes
    the billing date from the invoice date calendar. If no invoice dates are
    agreed, then the actual goods issue date is formed on the basis of
    delivery related billing. In order related billing, the billing date of the
    order forms the basis of the billing date.+
    +If you are billing services, the system proposes the date of services
    rendered. You can change the date manually in the sales document.+
    +If you are using a billing plan to bill a project, the system can propose
    billing dates for the billing plan on the basis of planned or actual dates
    in the corresponding milestone.+
    +In a billing plan for a maintenance or rental contract, you can specify rules
    by which the system determines billing dates on the basis of other dates in the contract.+
    Regards,
    Sarthak

  • Request delivery date at line item level

    Hi,
    I understand that the requested delivery date at the order header level applies to all its line items, but is there any possibility that for different line items, we can have different requested delivery dates.
    If YES, where do we enter requessted delivery deates at line item level??
    Thanks in advance.
    Vinay

    Hi,
    In the sales order you can enter the requested delivery date at item level in schedule line tab page in the first column(Delivery dates)
    But this will cause in delivery split
    Regards,
    Amrish Purohit
    Message was edited by:
            AMRISH PUROHIT

  • TAX values in the line item level of PO

    Hi
    I am printing the PO form. I need to dispaly the tax values that is coming in the line item level.
    Can any one tell me where i will get these values.
    For every line item in the PO under the tab INVOICE we have the tax code and tax jurisdiction. Near to that there is a push button TAXES.. I need to fetch the values maintained under this.. Based on the condtion type,,
    Regards
    Ansari
    Edited by: Muhammed Ansari Abubekkar on Aug 27, 2009 3:46 PM

    Hi ,
    I have tried this option. But it does not give me the values on the basis of condition types. it gives only the totals.
    I am using ECC 6.0.. That button may be configuration dependent.
    Regards
    Ansari

  • Modify Delivery Date in PO at line item level

    Hi,
    when we create line items in PO, there is a fiels called dilivery date at line item level. I want it to modify by fetching the value of delivery date from custom table on the basis of some selection criteria during PO creation. Please anyone can tell us whcih user exit will work for this.

    hi,
          I think there is no customer exit available. Better try for the BADI.
    Use the BADI ME_PROCESS_PO_CUST's method PROCESS_ITEM to change the item level value.
    Regards,
    S.Velsankar

  • Send CV03N attachments present in Purchase order at line item level

    I have a purchase order and want to send it via email. The purchase order has attachments at line item level (e.g. a specification in pdf format). Attachments were able to see through T-code CV03N,
    When transferring the PO to vendor ,smartform is attached to email and sended to vendor .now we need additioanl attachments also to be sended in same email which is present at line item level (CV03N),Whether it is possible to copy the attachments into the email, so they are sent out, too?
    Please explain the methods
    Print program used for smartform is custom Z name space.
    Thanks in advance
    Regards,
    arun

    part 3
    *& Cet GOS attachments
    IF pa_incl = 'X'.
      CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
        EXPORTING
          classname          = 'BUS2010'
          objkey             = lv_ebeln
        TABLES
          gos_connections    = lt_gos_connections
        EXCEPTIONS
          no_objects_found   = 1
          internal_error     = 2
          internal_gos_error = 3
          OTHERS             = 4.
      IF sy-subrc <> 0.
        MESSAGE i001(zmm) WITH 'BDS_GOS_CONNECTIONS_GET' sy-subrc DISPLAY LIKE 'E'.
      ENDIF.
      LOOP AT lt_gos_connections INTO ls_gos_connections.
        CLEAR lv_docid.
        lv_docid = ls_gos_connections-loio_id.
        CALL FUNCTION 'SO_DOCUMENT_READ_API1'
          EXPORTING
            document_id                = lv_docid
          IMPORTING
            document_data              = ls_document_data
          TABLES
            object_content             = lt_object_content
            contents_hex               = lt_contents_hex
          EXCEPTIONS
            document_id_not_exist      = 1
            operation_no_authorization = 2
            x_error                    = 3
            OTHERS                     = 4.
        IF sy-subrc <> 0.
        MESSAGE i001(zmm) WITH 'SO_DOCUMENT_READ_API1' sy-subrc DISPLAY LIKE 'E'.
        ENDIF.
    * Create attachment name as file name
        CONCATENATE ls_document_data-obj_descr '.' ls_document_data-obj_type INTO at_subj.
    *add attachment
        IF ls_document_data-obj_type = 'TXT'. "If text document, attachment type should be 'RAW'
          CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'RAW'
              i_attachment_subject = at_subj
              i_att_content_text   = lt_object_content.
        ELSE.
          CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'BIN'
              i_attachment_subject = at_subj
              i_att_content_hex    = lt_contents_hex.
        ENDIF.
      ENDLOOP.
    ENDIF.

  • Fixed Value date- in Sales Order Line Item

    Hi ,
    The Filed Fixed Value Date , from where it gets the value.
    In My Case One Perticuler Material the Fixed Value Date is comming as Previous year date for todays billing document.
    How can avoide this fixed value date for the Sales order at Line item level. Where the Config is done for this.
    Thanks & Regards,
    Sridhar Sha

    Hi Sridhar,
    I dont think this feild is coming from some customization, I think user need to enter it manually.
    If it comes by default in your case  then please check, have you created current order with the refrence of old order?
    Because there is some chances that the date iscoming from the refrencing document.
    Regards.
    MT

  • How to change the posting date at the line item level in a sales order

    how to change the posting date at the line item level in a sales order

    Hi,
    I believe the POSTING DATE will appear on the accounting document
    In the Accounting document, the posting date will be based on the  Billing date.
    Please let me know if you need any more details
    santosh

  • The fixed value date is empty and not displayed in the VA05 report

    Hi SD Gurus,
    With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered. 
    But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank).  Can you any one help me with regard.
    We would like to fix this problem.
    Thanks in advance for providing solution to this query.
    Thanks and Regards,
    SAP-SD group

    Hi janarthanam,
    Ok.
    Goto t-code SQVI,SAP Quickviewer.
    Give a name to your query and enter description ,etc.
    Next enter the table from which you want to fetch data,ie,VBKD .
    Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
    Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
    the field u need to display ie. the fixed value date ( VALDT) .
    also select the fields u wish to have in the selection criteria.
    Enter these required information and u would get a report on the SAP screen or in your desired format.
    Hope it will suffice you.
    For any queries ,your are welcomed.
    Thanks,
    Umesh.

  • Custom filed at line item level in order.jsp

    Hi,
    I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
    similar to the below mentioned Standard functionality:-
    In order.jsp when we enter a valid item no in the item text box
    and press enter then the related data of the item is populated in order.jsp.
    Is this possible ??
    If yes please let me know how can we achiese this.

    Satish,
    the problem with product search is that ....
    custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
    so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
    but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
    can you tell me how is the item search done when we enter the item number and press enter?
    please suggest

  • Is there a user exit to modify PO line item level..

    Dear Friends,
    Is there a user exit to modify PO line item level..
    Ravi

    Hi...I'm not sure on any available customer exits for this purpose. However you can use the check function exit 'EXIT_SAPMM06E_012' of customer exit MM06E005 and using memory pointers you can change the item level data.
    The other option is to use BADI ME_PROCESS_PO_CUST's method PROCESS_ITEM to change the item level value. I would prefer the BADI rather than the customer exit.. Hope it works..
    Thanks,
    Jude

  • Tax column at line item level in VA01/VA02

    Hello All,
    I had a requirement to add the tax column at line item level for va01/VA02 transaction.
    I modified the screen 4900 and added the VBAP-TAXM1 column to the item table control and made that column input enabled.
    Now I had to calculate the TAX conditions based on the input in that tax column. None of the user exit is triggering when I change the values in this field, do I need to make any changes in the PAI of the 4900 screen in order to make the userexits trigger or am I missing anything?
    Thanks & Regards,
    SasiKiran.

    Hi
    Please, see SAP Note 862228 - Order reason for returns on item level. It is related with field AUGRU. Remember that it is a modification. I suggest you to add in addition data (for instance, SAP Note 209278 - Display of customer-specific fields in sales doc, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B', SAP Note 420546 - Additional data B and transaction variants in sales order and related notes).
    I hope this helps you
    Regards
    Eduardo

  • User Exit at line item level

    Hi all....
    I need a user exit which is applicable at line item level.
    The field 'first date' in line item, is same as first line in scehdule line.If i update 'first date in line item, the schedule line gets updated automatially. According to my requirement, i need a user exit at line item for date field.
    Thaks
    Aleem

    Hi,
    You can try this.
    USEREXIT_MOVE_FIELD_TO_VBEP                                      
    Use this user exit to assign values to new fields at the level of
    the sales document schedule lines.                               
    The user exit is called up at the end of the FORM routine        
    VBEP_FUELLEN.                                                    
    Thanks
    Krishna.

Maybe you are looking for