Fixed value Statistical key Figures based on Profit Centers - 9KE5

Hi all,
We have a Statistical Key Figure that is of Fixed Value category, based on Profit Centers. We are manually entering it in 9KE5.
Since it is of fixed value category, am I right to say that: once we enter in one period, it will automatically be updated in subsequent periods? But the current situation is, it does not update in subsequent periods, only the period which we enter.
Does anyone know how to correct this? So that once it is updated in 1 period, it will be automatically be updated in subsequent periods.
Thanks in advance!

Hi,
Yes, I saw the field and chose 1- Equal distribution.
I then select period 1, enter the quantities and save. Go back to 9KE5 and choose period 2, I expect the quantities entered in period 1 to be reflected in period 2. But this is not the case- there is no value for period 2.
I also managed to change the selection screen to have Period as select-options. If I choose Periods 1 to 12, the quantity I entered in 1 period is divided into 12, and it will only show that divided quantity. However, if I choose another Period, Period 3 for example, no value is shown.
Is this the correct behaviour? I am expecting the quantity entered in period 1 will also be shown in any other period.
Thanks!

Similar Messages

Retractor for Statistical Key Figures Not Sending Values

I have configured the standard retractor for primary costs and stat key figures based on all the documentation. Primary costs retract perfectly. Stat Key Figures do not send over the values.
I have configured UPBR_RETRACT with UPB_RET_STKEYFIG. In the update rules the only thing I have changed is assigned ZRATENU to 0BPS_PRICE and 0QUANTITY to 0BPS_QUANTITY. I copied the delivered planning level 4EXP0004 to a Z level assigned to my custom cube. In UPBR_STRUCT I assigned to the correct structures /1SEM/_YS_CHAS_210ZEXP0004 and /1SEM/_YS_KYFS_210ZEXP0004.
From BPS, when I run the retractor I get the message that "Retraction: Update completed without errors. Number of records:   56". All of this tells me things are running fine. My parameter group is setup as follows:
Retr. R/3 Comp.          6
Retractor Control          3
Delta Update          0
Destination          DE1CLNT209
Test mode Is Active          0
I go over to ECC and look at KP46. The stat key figures by cost center have been transferred but the planned values all show 0. When I go to table COSR, I see 0 in the planned fields.
Has anyone had this issue and do they know how to solve it?
Thanks,
Cherie

Dear Chrie,
Can u explain, what are the keyfigures that are not getting retracted to R/3?
If quantities and Unit of measure is not getting retracted, you will have to apply the note 889634. Check once.
If you are using the function modules UPR_COST_PLAN_INIT and UPR_COST_PLAN_EXECUTE, then make sure that you pass only Object Currency (0AMOCCC) values to it, as it supports only those.
Regards,
Srinivas Kamireddy.

Program for uploading Statistical Key Figure KK01 Stattistical Values KB31

Hi ,
I need a Program through which we can upload statistical kay figure and statistical key figure values data
any one who worked on this specific requirement please send the coding
Moderator message: this is not your code factory, please do some own research first.
Edited by: Thomas Zloch on Mar 2, 2012

Read [BAPI_ACC_STAT_KEY_FIG_POST|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_acc_stat_key_fig_post] documentation. For a list of such BAPI look at [BAPIs for manual actual posting in Controlling|http://help.sap.com/saphelp_46b/helpdata/pt/34/60afcfae724effe10000009b38f91f/frameset.htm] (or more recent ones) as well as transaction BAPI. Another solution is the [sdn search tool|http://www.sdn.sap.com/irj/scn/advancedsearch?query=kb31+bapi].
[Get back if you have more precise queries|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
Regards,
Raymond

Key Figure based on selection criteria

Hi SDNers,
I have Key figures which i would like to display based on multiple selection criteria... for this we donot have master data data restricted at the query level it should be at the key figure leve...
Eg:
Sales which i would like to display based on SORG,DIV,MATERIal Etc.. Kindly can anyone will help...
Thanks
Sonu

You can create restricted key figures if you want to use the same selection criteria in multiple queries. In which you can get value for key figure for selcted filters on that perticular key figure.
If you need it for just one query you can create a structure and in that structure you can create a new selection which has your restrictions on that key figures.
Search on help you will get to know hot to create structures and restricted key figures.

Key Figure based on condition between characterisics

Hello Guys
I have a key figure which needs to be displayed based on condition between 2 characteristics.
Scenario:
I have 2 fiscal periods : FP1 and FP2. and a Key Figure KF.
Condition:
Show KF only when FP1 not equals FP2.
EX: If FP1 = May and FP2 = May dont show KF.
If FP1 = May and FP2 = June then show KF.
How do i display a key figure based on a condition between 2 characteristics?
Please advise.
Thanks.

Create two formula variables based on replacement path that get the FP1 and FP2 (numeric values).
Let us say these are ckf1 and ckf2.
Create another CKF3 which is = "ckf1==ckf2"
Now, CKF3 will be 0 if these two are not equal, and 1 otherwise.
Create a condition on CKF3 so as to show only the records with a 0 value.
Finally hide CKF3.
That should be it.

IO settlement and statistical key figures

Hi experts,
Is it possible to make settlement based on statistical key figures (ex: M2) for internal order? as it is possible for the cost center (via cycle) i wondered if there is a way to do it for internal order.... Or the settlement with statistical key figures is only possible via cycle and thus only for CC??
Thanks in advance,
Chris

Hi Chris
This is possible, but in a slightly different way
Settlements cant happen based on SKF.. however, you can use Internal Orders as senders in assessment cycles.. For this refer note Note 605281.... It has a program which will allow you to use IO as senders in assmt cycle along with CC as senders
Then you can allocate from Internal orders based on SKF.. You need to define cycle in KSU1 and execute from KSU5... KO88 wont come into picture
Regards
Ajay M

LIS - Statistical Key figure

Hi Experts,
I am trying to create a statistical key figure with LIS. I have selected info set - Net Sales Value as key figure. system throwing the message
"No currency key figures can be processed at present
Message no. KS306
Diagnosis
You selected a key figure from the LIS describing a currency.
System response
No currency key figures can be processed using the present release.
Procedure
Select a key figure from the LIS that refers to a quantity".
Pl.Help
rajeswari

Hi Rajeswari,
while Link to LIS what are steps you followed
1) Click the Link to LIS, than one pop-up box will appear
2) Select Search by Info Stcture, than Enter
3) Select Related Item for Example 02 Purchasing than Enter
4) Select 012 Purchasing Enter
5) Select EMNG Invoice quantity
Depending the above Sequence you have to Select, Amount will not take the above sequence...

Calculated Key Figures based on Attributes

Hi
In one of our queries we need to create a calculated key figure based on an attribute. Any suggestions on the best way to do this?
I have looked at a Virtual Key Figure, but because our Cube name contains underscores (_) it shortdumps. Is there a way around this?
Thanks in advance.
Chami Herath

Hi,
what do you mean with calculated key figure based on an attribute? Is your attribute a characteristic in the cube or is it just a attribute of a characteristic? Let me know more details.
regards
Siggi

Why do we see only values of key figures of a cube in SE11?

Hi all,
When we view the contents of a cube in SE11 why cant we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
Please explain.
Thank you.
TR.

SE11 gives you the Table View.
A Infocube is a complex strructure where data is stored in mutiple Tables...
KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
So, to be able to read the values , you would need to know how data is organised in an Infocube
Regards.

Use of key figure based on period

Hello All,
I have 2 key figures in my multiprovider, e.g. Actual Amount and Budget Amount. I need to display one of the key figure based on period. Reports have January to December columns. Now, if current period is October, I have to display Actual Amount from January to October. For future periods i.e. November & December, I need to show Budget Amount.
Can anoybody please provide a solution for this? How should I proceed?
Thanks and Kind regards,
Ajay

HI Ajay
Looks like you are creating a Capital Forecasting report. In order to show amounts period by period what you need to do is
- Create one key figure for actual amount which might be based on 0Amount key figure with Debit/Credit indicator as S. (If this is not the case then please do so according to your requirement)
- Create one key figure for Budget amount (according to your requirement)
- Create one customer exit "Formula" variable called actual indicator. This variable will be populated with a number of 1 to 12 for each record in your cube based on the user entered month. i.e. if user enters October. assume your cube has 12 records one for each month the first 10 records will be populated with 1 and the records for Nov and Dec will be populated with a 0.
- Create one customer exit "Formula" variable called Forecast indicator. This variable will be populated with a number of 1 to 12 for each record in your cube based on the user entered month. i.e. if user enters October. assume your cube has 12 records one for each month the first 10 records will be populated with 0 and the records for Nov and Dec will be populated with a 1.
- Create a calculated key figure that is defined as (Actual Amount)Actual indicator + (Forecast Amount)Forecast Indicator.
- Create twelve restricted key figures with the CKF created in the previous step restricted with the month (Jan to Dec)
- Add the above created twelve RKFs in the query.
Regards,

How do i create a Statistical Key Figure ?

Hi everybody,
I want to create a statistical key figure ...
How can i proceed ?
Thanks
Rodolphe.

As explained - just enter master data straight into your ZInfoobject in BW
You can use the business content characterisitc for statuistical key figure or define your own
All you are doign is creatinging a partioning chacracteristic to differntiate your key figure in a restricted key figure
ie
create a object called ZTYPE char 2 with master data and text
create a key figure called ZKF with type number
enter master data into ZTYPE via maintain master data on ZTYPE
z01 with text "No of Flights"
enter master data into ZTYPE via maintain master data on ZTYPE
z02 with text "no of miles"
Then design a cube with say
0fiscperiod
0comp_code
0ztype
and
zkf as the key figure
Load a csv file into the cube so we have for example:
0fiscperiod = 003.2008
0comp_code = aa01
0ztype = z01
zkf = 10
0fiscperiod = 003.2008
0comp_code = aa01
0ztype = z02
zkf = 5
The create a query with 2 RKFs - one called "No of Flights" which has zkf and a restriction of 0ztype = z01
and the other RKF which is called "No of Miles" which has a zkf and a restriction of 0ztype = z02
The in your rows have fiscal period and co code
You will then see two columns of No fo Miles and No of Flights
As mentioned before you can add more 0ztypes without having to extend the columns of your cubes (hence the term partioning characteristics) - the same prinicipal as CCA uses in CO - ith actual and plans
phew - hope that explains it all

Authorization check on technical name for statistical key figures

Dear experts,
I need an authorization check on the technical name for statistical key figures. I would like to avoid that local users can change/modify centrally defined key figures which follow a given naming convention.
I checked the authorization object K_KA03 for statistical key figures but this doesn't help as it only checks controlling area and activity. I also couldn't find the technical name as an authorization field.
What can I do to set up an authorization check on the technical name of the statistical key figure if it is not foreseen in the standard?
Thanks for any ideas,
René

Try something in similar lines as suggested in below link:
https://wiki.sdn.sap.com/wiki/display/PLM/COValidationstoadditionalauthorisations+checks
Regards
Sreenivas

Cca-statistical key figures

Dear all,
I am a bw consultant. i got a development ticket. CCA is already implement in my company. now they want to pull statistical key figure data. i really do nt have any functional knowledge about CCA-STATISTICAL KEY FIGURES. Can some one pls detail step by step pre-requisites to pull the statistical key figure data from cost center accounting. Ur help would be highly regarded and rewarded.
Thanks in advance..
sastry

Hi Sastry,
Statistical Key Figures (SKF) are required to apportion the cost to different cost centers. It works as a basis for apportionment. This is the general concept for using Statistical Key figure.
For e.g. you want to apportion Canteen expenses to different cost centers. This will be done through Distribution/Assessment T.codes. To apportion the cost to different cost centers, you need specify the SKF cost centerwise.
For creation of SKF, T.code is KK01, For display it is KK03
To enter the SKF data in to master, T-code is KP46
For apportion of canteen expenses, you may define SKF as EMPL in the master. After you create (KK01) a master, fill the master data (KP46) with the number of employees in each cost center. System will apportion the canteen expenses with the help of SKF which will be used in your Distribution/Assessment cycles.
To get the figures of various SKFs, you can use T-code S_alr_87013618
Hope this will help you go ahead.
regards,
Makrand

Statistical key figures

what is the t-code for statistical key figures.in what tables the data will get updated ?plz reply to me.

Will tell you how to maintain SKF in SAP
1) Create new SKF
2) Map Hierarchy to SKF
3) Add new SKF to Assessement Cycle..
1 ) KK01 is
2) Map Hierarchy to SKF
means you need to plan your Cost center with SKF in T-code KP46
3) Add new SKF to Assessment Cycle..
Whenever you are creating Plan Assortment cycle in T-code KSU7, under
receiver tracing factor box, you need to select these options... Rule will
be Variable portions and Variable portion type will be plan
Stati.Keyfigure...etc
Under Receiver Tracing factor tab, you need to select your new SKF.
Regards
Satish

Restricting key figure based on - INPUT value or value in TRANSACTION data

Hi fellow BWers, hope you can help with this report requirement.
Manual input variable : 0CALMONTH.
<b>Is it possible to restrict a key figure (0amount) like this on-the-fly: </b>
If 0calmonth in input variable > 0calmonth in transaction data
then restrict 0amount with 0calmonth from input variable
else restrict 0amount with 0calmonth from transaction data
It's a must-have requirement to do it 'on the fly', not in the ETL.
Thanks very much,
AG

Thanks a lot, I get the idea
In order to get the 0calmonth from the transaction data, i need to :
1. display the lowest granularity in the rows (so that calmonth is unique)
2. then use formula variable with replacement path on the infoobject 0CALMONTH to get the value from transaction data?
Is this correct?
If yes...since the user does not want the lowest granularity in the report, he wants result pr. profit center, this will happen if I take 'No display' on the characteristics :
Profit center A || 20
Profit center A || 30
Profit center A || 10
Profit center B || 15
<b>Question</b> How do I get the total pr. profit center, despite having all the other characteristics (hidden) in the row?
Thanks
AG

Fixed value Statistical key Figures based on Profit Centers - 9KE5

Similar Messages

Maybe you are looking for