Fixed width Portal

Team,
We are trying for a fixed width portal in 6.1, by changing the portalContent style in portal60.template and generating the styles, we are able to get the portal with fixed width. But portal is left aligned, how can we make the portal centered.
used "text-align: center" but it didn't help.
.portalContent
width: 950px;
text-align: center;
overflow: auto;
Which style we need to use for this.
Thanks,
Ramesh
Edited by ramesh.totakoori at 01/16/2007 6:15 PM
Edited by ramesh.totakoori at 01/16/2007 6:16 PM

Hi Ramesh,
Try adding "margin: auto" to the .portalContent CSS block and it should work in any correctly-implemented browser (Firefox, Safari, Opera).
Leave the "text-align: center" in there because I think it's needed for IE 6. Not sure if IE 7 addressed this issue or not.
Hope this helps!
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com

Similar Messages

Trouble with Fixed Pixel Width Portal

I'm working on a portal for the University of Tennessee Martin, and I'm trying to make it a fixed pixel width(800). We tried setting the width for each region, but it would always revert to a percentage. We then tried adding empty regions out to the side. It worked for IE 6, but when we looked at it on Safari and Netscape spaces between regions had been added, things weren't aligned; it was a mess. Could someone tell me if this is possible and how?

Hi Josh,
Take a look at this post:
Re: Fixed Width Region not being Honored
or do a search of this forum on 'pixel'

How can I convert my web page from a fixed width layout to a fluid grid layout?

I'm taking a web design class (I'm using Dreamweaver CS6, btw) wherein the professor started us out building our websites in a fixed width layout but now I want to change my site into a fluid grid layout. My "site" so far is just one long page, and I've already designed it with fluid grid adjustments in mind (most things are centered in the layout) so it shouldn't need excessive tweaking.
Is there a way to duplicate the site folder that holds my first page, re-open a new document in fluid, then copy the code in and tweak the width parameters for the different layouts?
Did I just answer my own question? Help - I am new at this!!
Thanks all,
KC

Herbert2001 wrote:
A bit off-topic, but Osgood: have you ever used SASS or LESS? When you are building your own grid systems it can save you a tremendous amount of time, and it's a lot of fun.
Take the following simple example - it generates all the 23 css classes automatically for a 12 grid system. And simply changing one variable allows you to create and calculate any number of columns!
//variables
$desktop: 1025px;
$large-columns: 12;
@media only screen and (min-width: $desktop) {
     //regular grid span classes
    @for $i from 1 through $large-columns {
        .span-large-#{$i} {
            width: percentage($i/$large-columns);
     // push classes
    @for $i from 1 through (($large-columns)-1) {
        .push-large-#{$i} {
            margin-left: percentage($i/$large-columns);
No, not explored it yet, and may never....I don't know. I don't really make much money out of web design. It's becoming more and more difficult to find the desire to learn new techniques when the opportunities aren't really there to put them into practice on as regular basis as I would like. I've got a very good handle on css, php, html, jQuery - I'm not sure I want to add another layer at the moment, given I'm never quite sure how long I will continue to 'bang my head against the wall' . I'm getting to the stage where I keep asking myself do I really need the problems associated with learning new stuff to the point of being comfortable with it if the financial rewards at the end don't equate to the efforts of learning it.
I don't really enjoy web development if truth is known. I come from a Graphic Design background which I much prefer but somehow got side tracked and pushed in this direction and there's no way back now, lol. Whilst I concede Web Development is much more exciting its also 100 times more complex/difficult and the skills needed are considerably more.
Your example looks interesting and I should think I could pick it up reasonably easily given I work with php which uses variables on a similar basis.

How to create a fixed-width column within an APEX 4 interactive report?

This thread is a follow-up to {message:id=9191195}. Thanks fac586.
Partial success: The following code provided by fac586 limits the column width of the Apex 4 interactive report column as long as the column data contains whitespace within a Firefox 3.6 browser:
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
</style>
</pre>
Notes:
1. The code above is put into the HTML header section for the page.
2. T_DESCRIPTION is defined as VARCHAR2(2000).
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I tried adding "float: left;":
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
<font color="red"> float: left;</font>
</style>
</pre>
Notes:
1. "float: left;" does not require whitespace and successfully splits the column between characters in lieu of whitespace.
2. "float: left;" shrinks the cell height and allows the page background to show through... couldn't determine how to fix this.
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I've done some more research, but I still haven't discovered how to create a fixed-width column within an APEX 4 interactive report that displays properly within an Internet Explorer 7 browser.
Any ideas and help will be appreciated.

Thanks for your help with this!
<pre class="jive-pre">
what theme are you using?
</pre>
A customized version of theme 15.
<pre class="jive-pre">
Floating a table cell makes no sense (to me anyway).
</pre>
You are correct. I was just trying a different approach ... trying to think out of the box.
<pre class="jive-pre">
Think you'll need to create an example on apex.oracle.com with sample data
if there are any further problems.
</pre>
Great suggestion! The code your provided works in the Firefox 3.6.12 browser, but still doesn't work within my Internet Explorer 7.0.5730.13 browser.
UPDATE:
I have recreated the problem at apex.oracle.com, you can use the following information to check it out:
URL: http://apex.oracle.com/pls/apex/f?p=43543:100::::::
Workspace: IR_FIXED_WIDTH_COLS
Username: GUEST
Password: Thx4help
Application: 43543 - CM_RANDY_SD
Note: Table name is TEST_DATA
The following code provided by fac586 works in both Firefox 3.6 and IE7 using default theme "21. Scarlet" at apex.oracle.com; however, it doesn't work when I use a copy of our customized theme "101. Light Blue":
<pre class="jive-pre">
<style type="text/css">
.apexir_WORKSHEET_DATA {
th#T_DESCRIPTION {
width: 300px;
max-width: 300px;
td[headers="T_DESCRIPTION"] {
max-width: 300px;
word-wrap: break-word;
</style>

</pre>
Any idea what in the theme could be causing the fixed width column to be ignored in IE 7?
Edited by: CM Randy SD on Dec 7, 2010 11:22 AM

FDM Fixed-Width Import Format & Multiple Accounts/Periods Issue

Hi FDM experts,
I have an issue that I wanted to reach out to you on regarding fixed-width import formats and how to cater for my current scenario for export to Hyperion Planning.
I am working with a flat file (.txt) I need to import to FDM with the current format;
A
B
C
D
E
F
G
Z
Year
Channel
Product
Jan-MTD-Account 1
Jan-MTD-Account 2
Jan-YTD-Account1
Jan-YTD-Account2
Dec-YTD-Account2
2013
Channel_1
Product_1
1000
2000
1000
2000
10000
These are all fixed in width so the field lengths will need to be defined in the import format. The requirement for loading to the system is only a speciifc Month YTD value for both Account1 and Account 2.
If my chosen Month is 2013 Jan, I will only require columns F and G to be loaded. These are the issues I have identified;
Can a fixed width import format cater for loading to multiple accounts in the same file? Or would I need a separate import format per account?
Can a fixed width import format cater for loading to a variable Actual Month period? Or do I need 12 import formats/locations per month?
Your help is much appreciated!
Many thanks
Aaron

Hi Aaron,
the solution you are looking for needs pivoting your source file.
Think that FDM, by default, only accepts files with one single column for amount. You have to pivot your file based on your logic and import the pivoted file.
For example:
Year     Channel     Product     ... Jan-YTD-Acc1     Jan-YTD-Acc2 ...
2013     CH1          PR1               1000                    2000
If your POV is Jan-2013, your data imported will look like:
Year     Channel     Produc     Account     Amount
2013     CH1          PR1          ACC1          1000
2013     CH1          PR1          ACC2          2000
All this process can be automated by playing with Import Scripts.
HTH

How to determine the fixed width I can use to generate html columns in java

I have a jsp where I dynamically generate menus for a web page.
Table's cells are generated with different width, making the menus look differently.
When clicking on menus, cells changing sizes.
What is the best way to implement that, so I have a fixed width for every column?
Thank you

That's what I do.
The code determines the width of the column now.
The only drawback is that I manually assign values to the width depending on the menu item length.
Is there any way how to do it dynamically, by determining how many px width will be by having the menu item lenght?
<TABLE cellspacing=0 cellpadding=0 border=0 width="100%">
               
                    
               <%
                    int gs = menu.getSelectedGroupNum();
                    MenuGroup menuGroup = menu.getMenuGroup(gs);
                    int is = menu.getSelectedItemNum();
                    int maxScr = 10; //10 screens buttons per line
                    int totScr = menuGroup.getSize(); //total number of screens for the selected menu
                    int rowsNum = 0;
                    rowsNum = (int)Math.ceil((double)totScr/maxScr);
                    System.out.println("Num of scr per line: " + maxScr +
                                             " Num of scr/menu: " + totScr +
                                             " Num of rows: " + rowsNum);
               for(int     screenRow = 0; screenRow < rowsNum; screenRow ++){
                    //for (int item = 0; item < menuGroup.getSize(); item++)%>
               <tr><td>
                    <table border="0" cellspacing="0" cellpadding="0" height="20">
                     <tr>
                       <td width="251"><img src="images/Menu1L.gif" width="8" height="25">
                    <%
                    for(int item = screenRow*maxScr; item < (screenRow + 1)*maxScr && item < totScr; item ++)
                         MenuItem menuItem = menuGroup.getMenuItem(item);
                         String title = menuItem.getDisplay();
                         String link = null;
                         String cssClass = null;
                         System.out.println(title + ":" + title.length());
                         if(!menu.isDisabled())
                              link = "<A href=\"Menu.do?top=" + gs + "&side=" + item + "\">";
                         %>
                         <%
                         else{
                              link = "";
                              title = "<i>" + title + "</i>";
                         MenuItem subMenuItem = null;
                         boolean isSubMenu = menuItem.containsSubMenuItem();
                         String subText = null;
                         //determine the width of the column
                         int width = 0;
                         if(title.length() > 5 && title.length()<20)
                              width = 158;
                         if(title.length() > 20)
                              width = 193;
                         if(title.length() <=5)
                              width = 60;
                         if (is == item){
                              //link = "<A href=\"Menu.do?top=" + gs + "&side=" + item + "\">";
                              cssClass = "ScreenItemSel A";
                         else
                              cssClass = "ScreenItem";
                         %>
                         <TD align = "center" nowrap class = "<%= cssClass%>" background ="images/Menu1F.gif" width="<%=width%>"> <%=link%><%=title%></TD>
                         <TD class="Screen" nowrap><img src="images/Menu1Sep.gif" height=25 width=16></TD>
                    <%
                    }%>
                              <TD width="100%" valign=top align=right class="ScreenName" background="images/Menu1F.gif"><%--<%=mode%>--%></TD>
                              <TD><IMG src="images/Menu1R.gif" width="8" height="25"></TD>
                         </td>
                    </tr>
                    </table>
               </td>
               </tr>
               <%}
               %>
               
</TABLE>

Spry menubar not working correctly in IE9 - fixed width or padding or...?

Need help. My spry menu bar isn't all the way to the right when in compatibility mode in IE9. When not in compatibility mode it is even further from the right. Is there a way to make it so that it is all the way to the right on both compatibility and non-compatibility modes. Is there a better way than changing the padding or can I do a fixed width? www.superedgar.com
The spry code is below.
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
font-family: Arial, Helvetica, sans-serif;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1010;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: auto;
float: left;
white-space: nowrap;
border-top-width: 1px;
border-right-width: 1px;
border-bottom-width: 1px;
border-left-width: 1px;
border-top-style: solid;
border-right-style: solid;
border-bottom-style: solid;
border-left-style: solid;
border-top-color: #cccccc;
border-right-color: #cccccc;
border-bottom-color: #cccccc;
border-left-color: #cccccc;
background-image: url(../images/Menu%20Bars/metalsubmenubargray.gif);
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0%;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
width: auto;
left: -1000em;
float: none;
white-space: nowrap;
background-image: url(../images/Menu%20Bars/metalsubmenubargray.gif);
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
cursor: auto;
left: auto;
background-image: url(../images/Menu%20Bars/metalsubmenubargray.gif);
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
float: none;
width: 14em;
background-image: url(../images/Menu%20Bars/metalsubmenubargray.gif);
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
margin: -5% 0 0 95%;
border-right-style: solid;
border-left-style: solid;
border-right-color: #999999;
border-left-color: #999999;
border-right-width: 2px;
border-left-width: 1px;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
position: absolute;
width: 14em;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
color: #392B68;
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
font-size: 14px;
font-weight: bold;
padding-top: 8px;
padding-right: 29px;
padding-bottom: 7px;
padding-left: 30px;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
color: #392B68;
background-image: url(../images/Menu%20Bars/metalsubmenubargrayhover.gif);
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
color: #392B68;
width: auto;
float: none;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-position: 95% 50%;
color: #392B68;
width: auto;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-position: 95% 50%;
color: #FCFDFF;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-position: 95% 50%;
width: auto;
float: none;
color: #392B68;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-position: 95% 50%;
color: #FCFDFF;
width: auto;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;

because of the interpretation of the different browsers, it is very difficult to get the correct outcome each time.
In your case, I would do exactly as you have done, that is apply an auto width to the menu item and then apply a padding to fill the rest. I then centre the menubar so that the difference is equally divided betweeen left and right.
Gramps

Switching from delimited to fixed width and had to retype 115 column names

Hi we run 2012 enterprise. I just changed a delimited flat file over to fixed width and had to retype all 115 column names. Is there a way to preserve at least some of what ssis already knows (eg col names) in the flat file connection when
this kind of changeover is occuring?

Thx Mike. I appreciate your help so dont take this the wrong way.
Lets be honest. This kind of behavior and some of the others I've posted recently when it comes to switching in and amongst flat file formats (fixed,unicode,unnecessary data type conversion etc etc) in ssis cannot possibly be by "design".
You might think I'm arrogant but hear me out.  As a graduate from one of the better engineering schools in the US and having earned a BSCS from that school, my thinking is that even a first year college student would design this little part of
ssis in a more flexible fashion. And the sad part is that legacy mainframe technologies from way way back baked this kind of flexibility into their products without add ins.  SSIS is purportedly .net technology and as such should follow the
most fundamental rules of OO which include flexibility and reusability.
We should be more careful about the term "by design". I believe this is actually a limitation which I'm sure would have been dealt with had there been more time, money and experience invested. One of my other posts cites a recommendation (from
ssis) that displays along with one of these flat file errors and has something to do with dt_ntext. But the recommendation actually doesnt work. So are we going to say that a recommendation that doesnt work is also by design? I dont think
so. By design infers "for valid reasons".   And I dont believe there are any valid reasons for this/these behaviors.   If there are , pls share.

How to fix Width of column in classic report.

Dear Friends
i am using Apex 3.2.
i have created Clasic Report and i have summary column in my report that column have description of issue so i want to fix width of that column nn Classic report .
i have try some code in html expression
<span>style="width: 480px; display: block; white-space: normal; font-size: 11px;">#ACTIVITY_SUMMARY#</span>
{code
after apply abovemention code that display me in my summary like this and not manage width of column.
style="width: 480px; display: block; white-space: normal; font-size: 11px;">Dear Cherryl, Greetings !! Thank you very much for the new query and we are pleased to confirm the availability of one single cabin in all the three categories of cabin on M.V. Mahabaahu. We would like to inform you that both the departures 15th Oct 2013 & 29th Oct 2013 (Golden triangle with Cruise) are operational and attached are the prices for your kind consideration. As a special promotion for the 15th Oct 2013 departure only, we are offering USD 100 per person reduction on the Golden triangle portion combined with the cruise. Kindly review and advise us to block the accommodation accordingly. Regards...pankaj
How to fix Width of column in classic report.
Thanks

Hi,
I'm working an example in APEX 4.2 so YMMV (your milage may vary!).
For Classic Reports, where the Column Attributes "Display As" is set to Display as Text (escape special characters ...:
1) I find that Column width and Element Width setting have no effect to make the column smaller or larger.
2) Here is one way that works:
- In the Region's Region Definition, under Attributes give the Static ID a name (no spaces), say, class-report.
- In the columns you want to affect, place "<div>#ENAME#</div>" in the columns Column Formatting "HTML Expression". Where "ENAME" here is the actual column name.
I'm using the EMP table as an example.
- Finally, in the page's HTML Header put, for example
<style>
#classic-report td.data[headers="ENAME"] div {
width: 200px;
color: blue;
#classic-report td.data[headers="JOB"] div {
width: 50px;
white-space: nowrap;
word-wrap: break-word;
</style>This makes the ENAME column wider and the JOB column smaller and wraps it.
Much more could be said. If you tweak you will find you can also affect spacing above, below and right/left of the data.
#classic-report .report-standard th.header {
border-left: #9fa0a0 1px solid;
padding: 2px 3px 4px 5px; /* top right bottom left margins */
font-size: 11px;
font-weight: bold;
vertical-align: bottom;
#classic-report .report-standard td.data {
border-left: #9fa0a0 1px solid;
padding: 3px 4px 5px 6px;
font-size: 9px;
}Does this help?
Howard

How to display fixed width column in Advanced Table?

Hi,
This is probably a newbie question for OAF. My requirement is quite simple but I couldn't find the answer in either the OAF developer's guide or anywhere else so I turn to the experts here. I have a region of type Table or Advanced table with three items in them. One of the Item is of type comments which could be up to 4000 characters.
I wanted to show all three on the first page but only have fixed width for the comments section like only show the first 50 characters for example and then if they want to see more detail they can click on a link to see full comments.
The problem is I cannot figure out how to make the comments item fixed width. I have played with the table width properties but it keeps displaying the comments in multiple lines (I don't want that...). I have also tried putting the Table in a Row Layout but it doesn't seem to help.
Since this is new development I can change my region style to anything to meet my requirements.
I hope this is an easy question and if someone can help me that would be great....:-)

Hi,
Thanks but I was not wanting to change the VO attribute length size since I want to have a link on the first page which would enable to see a user the full 4000 comments using the same VO object. Then if I limit it to 50 characters in the VO, I will not be able to display the full comments on the second page.
Isn't there some way in the UI that I can limit it? I know one workaround I can use for now is to have another column in the VO with the 50 character value such as substr(comments, 1, 50) and then have the full comments selected also in the VO and then show this subtr value in the first page and the comments value in the 2nd. I just thought there would be an easier way about it then doing all this workaround.
Any ideas?
Thanks

How can i change standard font and fixed-width font in ipad 2?

i need to change standard font and fixed-width font in my ipad 2, but i can not find safari setting menu. it is alower me to change that?

Sorry, the font is not user selectable in Safari on iPad, like it might be on a desktop. You can change the font size, but not the actual font.

Importing fixed width text from a .txt file

I am really struggling to do in Numbers '09 something which I can do easily in Excel.
I have a txt file containing plain text in fixed-width columns which I would like to import into numbers.
I just cannot find a way to do it.
I have tried using the Insert/choose menu item - but it won't take .txt files.
I have tried to copy/paste the data, but it get's pasted into a single column.
The data consists of many lines like this:
Part Value Device Package Library Sheet
A-IN JST-2.0-4 JST-2.0-4 JST-20M KMILLAR 1
A-IN JST-2.5-4 JST-2.5-4 JST-25M KMILLAR 1
A-IN JST-2.8-4 JST-2.8-4 JST-28M KMILLAR 1
(and so on....)
(Each column is an exact number of characters wide, but these forums make that hard to see due to the variable spaced fonts).
How can I import this data into numbers?
(Sorry, but I cannot get the data in any other format, such as CSV, the application which exports it only support fixed width colums with spaces for padding).
Many thanks in advance,
Kenny

Here is a script treating the case of fixed widths values.
--[SCRIPT fixedwidth_values_toTSV.scpt]
Enregistrer le script en tant que Script : fixedwidth_values_toTSV.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
aller au menu Scripts , choisir Numbers puis choisir fixedwidth_values_toTSV
Choisir un fichier texte.
Le script détermine la largeur des différentes colonnes puis remplace les groupes séparateurs par des caractères TAB.
Le résultat est passé dans le presse-paiers et est enregistré à la place du contenu initial.
Vous pouvez alors
(1) coller dans le document de votre choix
(2) ouvrir le fichier texte modifié dans Numbers qui accepte sans broncher les ficiers .txt.
Utilisation alternative : enregistrer le script en tant que Progiciel (Application sous 10.6.x)
Glisser-déposer l'icône d'un fichier texte sur celle de l'application lancera le traitement voulu.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
Sous 10.6.x,
aller dans le panneau "Général" du dialogue Préférences de l'Éditeur Applescript
puis cocher la case "Afficher le menu des scripts dans la barre des menus".
--=====
Save the script as a Script: fixedwidth_values_toTSV.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
go to the Scripts Menu, choose Numbers, then choose "fixedwidth_values_toTSV"
Choose a text file.
The script scan the file's contents to extract the width of every column then it replace the separator groups by TAB characters.
The result is passed to the clipboard and is written in the original file.
So you may :
(1) paste in the document of your choice
(2) open the modified text file with Numbers which is fair enough to do that.
An alternate track is to save the script as an Application Package (Application under 10.6.x)
Drag and drop the icon of a text file on the application's one will do the job.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2010/08/19
--=====
on run
set un_fichier to choose file with prompt "Choose e text file…" of type {"public.plain-text"} without invisibles
my commun(un_fichier)
end run
--=====
on open (sel)
set un_fichier to item 1 of sel
tell application "System Events" to set type_ID to type identifier of disk item ("" & un_fichier)
if type_ID is "public.plain-text" then my commun(un_fichier as alias)
error "The file “" & un_fichier & "” isn’t a text file !"
end open
--=====
on commun(le_fichier)
set le_contenu to read le_fichier
set le_contenu to "azer ertyuio wxcv dfghj
qszaed dc fghj mlkjhgf nbvcxw
aqwzsx edcrfv tg byhn aaaaaaa "
set listedelistes to {}
set plusgrandelongueur to 0
set pluspetitelongueur to 999999
set listelignesbrutes to paragraphs of le_contenu
repeat with refd_uneligne in listelignesbrutes
set maybe to contents of refd_uneligne
set maybe2 to count of maybe
if maybe2 > plusgrandelongueur then set plusgrandelongueur to maybe2
if maybe2 < pluspetitelongueur then set pluspetitelongueur to maybe2
copy my decoupe(maybe, space) to end of listedelistes
end repeat
set differencedelongueur to plusgrandelongueur - pluspetitelongueur
set des_espaces to space
repeat differencedelongueur times
set des_espaces to des_espaces & space
end repeat
set largeur1 to 0
repeat with refd_uneligne in listedelistes
set maybe to length of first item of refd_uneligne
if maybe > largeur1 then set largeur1 to maybe
end repeat
set liste_finale to {}
repeat with refd_uneligne in listelignesbrutes
set maybe to contents of refd_uneligne
set maybe2 to text 1 thru largeur1 of maybe
repeat while maybe2 ends with space
set maybe2 to text 1 thru -2 of maybe2
end repeat
copy maybe2 to end of liste_finale
copy text (largeur1 + 2) thru plusgrandelongueur of (maybe & des_espaces) to contents of refd_uneligne
end repeat
Enter the bigger loop *)
set cest_Lafin to false
repeat
Deprieve the stored rows of the treated column's items *)
set flag to 0
repeat
set flag to flag + 1
set flag2 to 0
repeat with refd_uneligne in listelignesbrutes
if "" & character flag of contents of refd_uneligne is space then set flag2 to flag2 + 1
end repeat
if flag2 < (count of listelignesbrutes) then exit repeat
end repeat
repeat with refd_uneligne in listelignesbrutes
copy text flag thru -1 of contents of refd_uneligne to contents of refd_uneligne
end repeat
Prepare the extraction of next column *)
repeat with refd_uneligne in listelignesbrutes
copy my decoupe(contents of refd_uneligne, space) to end of listedelistes
end repeat
Extract the width of the column to treat *)
set largeur1 to 0
repeat with refd_uneligne in listedelistes
set maybe to length of first item of refd_uneligne
if maybe > largeur1 then set largeur1 to maybe
end repeat
Extract the column's values *)
repeat with i from 1 to count of listelignesbrutes
set maybe to contents of item i of listelignesbrutes
set maybe2 to text 1 thru largeur1 of maybe
repeat while maybe2 ends with space
set maybe2 to text 1 thru -2 of maybe2
end repeat
copy (contents of item i of liste_finale) & tab & maybe2 to item i of liste_finale
try
copy text (largeur1 + 2) thru -1 of maybe to item i of listelignesbrutes
on error
set cest_Lafin to true
end try
end repeat -- i
if cest_Lafin then exit repeat
end repeat -- bigger loop
set le_contenu to my recolle(liste_finale, return)
set the clipboard to le_contenu
set eof of le_fichier to 0
write le_contenu to le_fichier
end commun
--=====
on decoupe(t, d)
local oTIDs, l
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to oTIDs
return l
end decoupe
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) vendredi 20 août 2010 12:44:33

Fixed width file outgoing with header,detail and trailer in one map

we have a scenario where in we have to create an output file. the file is fixed width with three different kinds of records namely header, details and trailer. if the specification of the metadata of the file is specified how will we incorporate the creation of the file in one map since the map produces only one call to UTL_FILE and writes it.
there is a work around in a crude way where in we can define the file as a CSV and pass everything in an appanded string in one column. but i wanted to know how we can get the three logical records in one map..
thanks
kamal

The problem is not with generating the records.. i mean header , detail and trailer.
it is how we put them into a fixed width sampled file. if we look at the code generated we will see only one call being made to generate the file.

Out of memory error - from parsing a "fixed width file"

This may be fairly simple for someone out there but I am trying to write a simple program that can go through a "fixed width" flat txt file and parse it to be comma dilmeted.
I use a xml file with data dictionary specifications to do the work. I do this because there are over 430 fields that need to be parsed from a fixed width with close to 250,000 lines I can read the xml file fine to get the width dimensions but when I try to apply the parsing instructions, I get an out of memory error.
I am hoping it is an error with code and not the large files. If it is the latter, does anyone out there know some techniques for getting at this data?
Here is the code
   import java.io.*;
   import org.w3c.dom.Document;
   import org.w3c.dom.*;
   import javax.xml.parsers.DocumentBuilderFactory;
   import javax.xml.parsers.DocumentBuilder;
   import org.xml.sax.SAXException;
   import org.xml.sax.SAXParseException;
    public class FixedWidthConverter{
      String[] fieldNameArray;
      String[] fieldTypeArray;
      String[] fieldSizeArray;
       public static void main(String args []){
         FixedWidthConverter fwc = new FixedWidthConverter();
         fwc.go();
         fwc.loadFixedWidthFile();
        //System.exit (0);
      }//end of main
       public void go(){
         try {
            DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
            DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
            Document doc = docBuilder.parse (new File("files/dic.xml"));
            // normalize text representation            doc.getDocumentElement ().normalize ();
            System.out.println ("Root element of the doc is " +
                 doc.getDocumentElement().getNodeName());
            NodeList listOfFields = doc.getElementsByTagName("FIELD");
            int totalFields = listOfFields.getLength();
            System.out.println("Total no of fields : " + totalFields);
            String[] fldNameArray = new String[totalFields];
            String[] fldTypeArray = new String[totalFields];
            String[] fldSizeArray = new String[totalFields];
            for(int s=0; s<listOfFields.getLength() ; s++){
               Node firstFieldNode = listOfFields.item(s);
               if(firstFieldNode.getNodeType() == Node.ELEMENT_NODE){
                  Element firstFieldElement = (Element)firstFieldNode;
                  NodeList firstFieldNMList = firstFieldElement.getElementsByTagName("FIELD_NM");
                  Element firstFieldNMElement = (Element)firstFieldNMList.item(0);
                  NodeList textFNList = firstFieldNMElement.getChildNodes();
                  //System.out.println("Field Name : " +
                           //((Node)textFNList.item(0)).getNodeValue().trim());
                  //loads values into an array
                  //fldNameArray[s] = ((Node)textFNList.item(0)).getNodeValue().trim();
                  NodeList typeList = firstFieldElement.getElementsByTagName("TYPE");
                  Element typeElement = (Element)typeList.item(0);
                  NodeList textTypList = typeElement.getChildNodes();
                  //System.out.println("Field Type : " +
                           //((Node)textTypList.item(0)).getNodeValue().trim());
                  //loads values into an array
                  //fldTypeArray[s] = ((Node)textTypList.item(0)).getNodeValue().trim();
                  NodeList sizeList = firstFieldElement.getElementsByTagName("SIZE");
                  Element sizeElement = (Element)sizeList.item(0);
                  NodeList textSizeList = sizeElement.getChildNodes();
                  //System.out.println("Field Size : " +
                           //((Node)textSizeList.item(0)).getNodeValue().trim());
                  //loads values into an array
                  fldSizeArray[s] = ((Node)textSizeList.item(0)).getNodeValue().trim();
               }//end of if clause
            }//end of for loop with s var
            //setFldNameArray(fldNameArray);
            //setFldTypeArray(fldTypeArray);
            setFldSizeArray(fldSizeArray);
             catch (SAXParseException err) {
               System.out.println ("** Parsing error" + ", line "
                  + err.getLineNumber () + ", uri " + err.getSystemId ());
               System.out.println(" " + err.getMessage ());
             catch (SAXException e) {
               Exception x = e.getException ();
               ((x == null) ? e : x).printStackTrace ();
             catch (Throwable t) {
               t.printStackTrace ();
      }//end go();
       public void setFldNameArray(String[] s){
         fieldNameArray = s;
      }//end setFldNameArray
       public void setFldTypeArray(String[] s){
         fieldTypeArray = s;
      }//end setFldTypeArray
       public void setFldSizeArray(String[] s){
         fieldSizeArray = s;
      }//end setFldSizeArray
       public String[] getFldNameArray(){
         return fieldNameArray;
      }//end setFldNameArray
       public String[] getFldTypeArray(){
         return fieldTypeArray;
      }//end setFldTypeArray
       public String[] getFldSizeArray(){
         return fieldSizeArray;
      }//end setFldSizeArray
       public int getNumLines(){
         int countLines = 0;
         try {
                //File must be in same director and be the name of the string below
            BufferedReader in = new BufferedReader(new FileReader("files/FLAT.txt"));
            String str;
            while ((str = in.readLine()) != null) {
               countLines++;
            in.close();
             catch (IOException e) {}
         return countLines;
      }//end of getNumLines
       public void loadFixedWidthFile(){
         int c = getNumLines();
         int i = 0;
         String[] lineProcessed = new String[c];
         String chars;
         try {
                //File must be in same director and be the name of the string below
            BufferedReader in = new BufferedReader(new FileReader("files/FLAT.txt"));
            String str;
            while ((str = in.readLine()) != null) {
               //System.out.println(str.length());
               lineProcessed[i] = parseThatLine(str);
               i++;
            in.close();
             catch (IOException e) {}
            //write out the lineProcess[] array to another file
         writeThatFile(lineProcessed);
      }//end loadFixedWidthFile()
       public void writeThatFile(String[] s){
         try {
            BufferedWriter out = new BufferedWriter(new FileWriter("files/outfilename.txt"));
            for(int i = 0; i < s.length -1; i++){
               out.write(s);
}//end for loop
out.close();
catch (IOException e) {}
}//end writeThatFile
public String parseThatLine(String s){
int start = 0;
int end = 0;
String parsedLine = "";
int numChars = getFldSizeArray().length;
//Print number of lines for testing
//System.out.println(numChars);
String[] oArray = getFldSizeArray();
//String chars = oArray[0];
//System.out.println(chars.length());
//oArray
for(int i = 0; i < numChars -1; i++ ){
if(i == 0){
start = 0;
end = end + Integer.parseInt(oArray[i])-1;
else
start = end;
end = end + Integer.parseInt(oArray[i]);
parsedLine = parsedLine + s.substring(start, end) + "~";
}//end for loop
return parsedLine;
}//End of parseThatLine
I have tried to illeminate as many arrays as I can thinking that was chewing up the memory but to no avail.
Any thoughts or ideas?
Message was edited by:
SaipanMan2005

You should not keep a String array of all the lines of the file read.
Instead for each line read, parse it, then write the parsed line in the other file:      public void loadFixedWidthFile() {
         BufferedReader in = null;
         BufferedWriter out = null;
         try {
            //File must be in same director and be the name of the string below
            in = new BufferedReader(new FileReader("files/FLAT.txt"));
            out = new BufferedWriter(new FileWriter("files/outfilename.txt"));
            String str;
            while ((str = in.readLine()) != null) {
               //System.out.println(str.length());
               str = parseThatLine(str);
               //write out the parsed str to another file
               out.write(str);
         catch (IOException e) {
            e.printStackTrace(); // At least print the exception - never swallow an exception
         finally { // Use a finally block to be sure of closing the files even when exception occurs
            try { in.close(); }
            catch (Exception e) {}
            try { out.close(); }
            catch (Exception e) {}
      }//end loadFixedWidthFile()Regards

Problem with printing perfomance when using a fixed width font

Hello.
I'm using the java.awt.print.Printable interface for printing text.
Everything works fine when I choose a font like Serif.
When I choose a fixed width font, like Courier, the printing becomes too slow!!!
Any Idea?
My code looks like that :
private int sizeFont = 10;
private font myFont = new Font ("Courier", Font.PLAIN, sizeFont);
public int print(Graphics g, PageFormat pf, int indice)
Graphics2D g2=(Graphics2D)g;
while(myCondition){
g2.drawString(myString,0,0);
g2.translate(0,this.sizeFont);
return Printable.PAGE_EXISTS;

If it interests someone, I have found a solution :
do not use "Courier", but "Courier New" .

Fixed width Portal

Similar Messages

Maybe you are looking for