Fixing Audio in Video

Hello everyone! Today I filmed an interview with a handheld mic and a backup shotgun mic, the shotgun mic wasnt plugged in so the interview's audio was only recorded with one mono (left) channel of audio. after i drop the clip in on the timeline in premiere, how do i make it so its a sterio audio sound in the video? I'm sure to final cut pro where i would just copy the one track and paste it to a2 and it was bam sterio, this isnt the case with premiere. So in another words, when i drop my video on my time line, i only have mono left audio and i need mono left and right to make it a sterio sound. Thanks!

Now, with Fill Left/Fill Right (depending on what you have, and what you need), you will not have "true stereo," but will have 2-Channel, which will be "Dual-mono." Some folk do not understand the difference. They appear to be the same, but are not.
Still, for what you appear to want, that will accomplish your end result.
Depending on several factors, you might want to Pan each channel, to create what sounds more like "true stereo."
Hunt

Similar Messages

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

How do I fix out of sync audio and video on my ipad2?

How do I fix out of sync audio and video on my ipad2? The version is iOS 7.1.2

In what app?
Have you restarted or reset the device?

How to fix problems between audio and video sync?

Hello, I have this old camera DSR 200P and I'm trying to import to my final cut pro x. The importation success well but at the end the syncro between audio and video doesn't work. How can I fix it?
It's possible my mac doesn't accept this kind of camera or should I change any options of final cut?
Thank you

I use to edit footage for a client that was recorded on a DSR-250 (successor of the DSR-200) and every time, every single time, the audio sampling rate would not match my Sequence settings of 48khz, 16bit. The sampling rate of the captured video was always off by a slight amount. It might be 47999.9 one time and 48000.1 the next time ... but it was never at 48000 as it should have been. I chalked it up to Sony using cheap synthesized crystals (frequency generator) to control the rate.
Anyway, the fix was to export the captured clip using QuickTime Pro with the export's audio settings to 48khz, 16 bit.
-DH

Do you have fix for Photo Booth Audio and Video are not syncing properly, Do you have fix for Photo Booth Audio and Video are not syncing properly

My audio and video are not syncing properly. There is a lag from the audio to the video. Does anyone have a permanent fix for Photo Booth where the Audio and Video are not syncing properly?

If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. You aren't the only one having this problem.
One person having a Photo Booth problem, although not the same one as you are having solved it by running Disk Utility/Repair Permissions.

I have an error message, decompressing audio or video file, how do I fix it?

I have an error message, decompressing audio or video file, how do I fix it?

Hi carjam222,
Please mention some more details regarding your issue. Check the link below.
http://forums.adobe.com/thread/961741
Regards,
Vinay

Why Wont Apple Fix AUDIO / VIDEO Sync Issues

This has been a problem for awhile. Thank god there is a application fix but im receiving an iTouch very soon and I'm not sure if the same problem is going to be on that to..
It might be how Quicktime reads .MP4 and .M4V Files but i can play the videos on VLC and Zune Software fine..
I see other people posting this exact same problems. I see no answers... Apple Knows this is an issue. Why wont they fix it.
From what im hearing it is the audio that is going out of sync from the video.
Now my Final Question is
"Is this just a Software issue for the computers or is it also a Software issue (Assuming that quicktime is the software on these devices) for the iTouch / iPhone ?

well i got my itouch today and it seems that the audio and video sync issues are only on the computer distributions of quicktime and not the hand held device versions

No more audio or video preview in column view?

weird one... on my powerbook (g4) i suddenly have no ability to play/preview audio or video file in column view in the finder. works fine on my desktop machine with the same os and such...? highlighting a file just gives its name and dates and such, no ability to preview.
using 10.4.8 and QT 7.1.3. tried updating prebinding (and other normal quickfixes). think i might need to reinstall quicktime?

well, yes i tried all the basic quick fixes. (plus diskwarrior and applejack, etc.)
i thought i might find it in some of the preferences of finder or quicktime but no go.
the weirder thing is that if you highlight an audio or video file in the column view, while it gives no audio or video preview, if you click on the "get more info" button (or command-i) there will be the audio or video preview.
???

Audio and video sticking and jumping after installing windows 8.1

Hello,
I have a HP Pavilion G6 - 2292sa
The product no is C1Y93EA#ABU
I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related.
Any help you could give would be really apreciated.

Hi Greum,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
I suggest you run The HP Support Assistant to look for updates and help resolve issues. You also have a built in troubleshooter in Windows 8 and 8.1.
Press the Windows key +C to open charms
Type troubleshoot audio/video and press enter
Follow the on screen prompts.
If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
Here is a link to a document to assist you with updating.Updating Windows 8 to 8.1. Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through. Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center. Neither of these programs are able to start, from startup or even manually. They just won't run. Sound seems to come out fine still, but I do have video issues.
First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port. I still get an image, but it's set to current screen resolution instead of 1080i. I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens. Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen. I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires. When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer. So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
I did try updating the software with what's available through the support site, but nothing happened. I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software. Giving the audio and video a complete clean slate to work from, and got no positive results. I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv. Problems as described above still apply.
Anybody else have this issue? Anybody got a fix?

have you found a solution to this?
My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
*edit*
this worked for me i stumbled across this
I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked.

Photo Booth Audio and Video not in sync!

I am a YouTube musician. When I go to record I find it easiest to use the video feature in Photo Booth. However, ever since I upgraded to Mountain Lion my audio and video in my videos has been off of one another. They start off together but by the end of the video the audio is ahead of the video. When I went to try and see where it messes up I found that the video jumps frames creating almost a transition effect. I don't know how to fix this and would really like your help!

Check out the "More Like This" threads over in the right column------------>
Also check out KB Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and EZJim's Website for possible solution to your problem.

.Mov files in CC : The File Has no Audio or Video Streams

I recently updated premier to CC , since i have issues iimporting any .mov files at all.
The specific ones Im trying for my current project are exports from AE , rendered lossless animation .mov , worked fine in CS6 , will play in quicktime and other generic's but always getting the The FIle Has no Audio or Video Streams message when trying to import into a project.
Quicktime is updated so I can't understand why the won't play, is this a CC bug ?
i go back to cs6 on my other comp they open fine...
Ive seen a few topics on this none with a resolution and most of those where from cam's, this is an export from AE, anyone able to help this is stopping me from working atm ......
troy

I can verify that Apple screen recordings without audio do not import into any Adobe premeier.
Details on screen recording from Gspot v2.70a:
H.264
qt : Apple QuickTime (.MOV/QT)
File Type: QuickTime (.MOV)
Mime Type: video/quicktime
Len: 1:03.083
Frms: 1,521
Qf: 0.153
Frames/s: 20.000
wx: 1280 x 800
sar: 1.600 (8:5)
However Apple (MAC OSX) screen recordings WITH audio will import.
I would think this should be fixable with hotfixes...
If you (adobe staff) have access to macbook pros 2012 or 2013 models, open quick time pro, do a screen recording, make sure no audio is recording, just your screen movements.. then export to 1080p video (mov is only option).. then on a windows PC try to import that file into adobe premiere. The file will play perfectly fine natively in windows with any player so long as a H264 decoder is available on that system... the problem here is Adobe Premiere. Not the users system.
Edit:
To help those with this issue.. just make sure when you render your mov that you have ANY kind of audio in it.. and just remove the audio track once imported into premiere. I know it's frustrating and you would think something as simple as not having an audio track wouldn't break premiere but alas... we have to work around the shortcomings until they decide to fix it.. just like the VFR issue in premiere.

Audio and Video tracks don't go up/down together EVEN when linked selection is checked!

I'm sure this is something really simple but I just can't figure it out. And it must be a button or a option that I've checked because it didn't use to do that a few days ago.
Basically, I have a clip on the timeline which has a video and an audio track. I want to move the video clip up to the next video track but I want the audio to move down to the next audio track too. Right now it's not doing that. Only the video file moves up to the next track and the audio clip remains in the same track. How do I fix that so that however many tracks I move the video up by the audio goes down by that same number of tracks?

Hi Shooternz,
shooternz wrote:
Not sure how other NLES manage it but I think it would be a pain if audio automatically followed video in this respect. eg Blocked layers b'cos something is already there.
FCP &, and earlier behaved that way. I prefer the way Premiere Pro does it. You often do not need to move the audio to a different track when you move video to another track. I want to control the placement of audio and video separately now.
Thanks,
Kevin

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Fixing Audio in Video

Similar Messages

Maybe you are looking for