Fixing entry already exists . Error in creation of fixed pegging

Hi,
we are calling CTP from GATP after product availability check. Using fixed pegging relationship through standarad abap class
error message is coming as
Error occurred during creation of fixed pegging relationships
Fixing entry already exists
Message no. /SAPAPO/OM_ERROR2328
diagnosis
   An application program called an LCA routine. This led to an error.
Procedure for system administrator
Contact SAP Service. Specify the application
message occurred.
You must also enter:
o   The message number
o   Return code 17313 (om_pb_fixentry_exists)
o   Error code COM Core

Dear Santosh,
the common cause for the error LC Return code 17313:
The heuristic tries to determine locking arguments, but other processes are locking these.
Therefore the proposal,
1. Don't run the MRP in a parallel mode.
2. Check the note 513827 for more information.
Regards,
Tibor

Similar Messages

SG300, FW 1.2.7.76, "Entry already exists" when changing ACL's

Hello,
I am getting very frustrated trying to modify/create ACL's on my SG300-20 switch.
I have the switch in L3 mode. I have created several VLAN's and ACL's for each VLAN controlling their access to each other. After the initial setup, I have started trying to create more VLAN ACL rules to allow more access between the VLAN's. The problem I keep running in to is that when I go to modify the ACE's in the ACL, I keep getting the error message "Entry already exists". For example, I go to modify the port ranges to tighten them up, and try to save the ACE after modifying it, and I get that error message.
I have gotten frustrated and deleted ACE's, and then tried recreating them, and I get the same error message! I noticed that if I wait long enough (many minutes, hours?) I can go in and create the ACE again. The ACE definitely doesn't exist but the web interface won't let me create it. I've even tried using a completely different Priority value which isn't used in any of the ACL's, that didn't work either.
Why is this happening? At this point I am finding it next to impossible to configure this thing. Frustrating...

Here is a screenshot of one of my ACL's. This ACL is being applied to every port which is in the VLAN with the IP range 10.0.0.0/24
http://imgur.com/C6iQk
I just tried to add a new rule which failed with the same error:
Priority 89
Action: Permit
Source IP Address: 10.0.0.21
Source IP Mask: 0.0.0.0
Destination IP Address: 10.1.0.0
Destination IP Mask: 0.0.0.255
Source Port Range: 8080
Destination Port Range: 49152-65535
So I am trying to allow anything from the 10.1.0.0/24 network to talk to port 8080 on 10.0.0.21. This failed with the "Entry already exists" error.

Getting error message 2053 "This entry already exists in the following tab"

Hi all
i have a user form which is connected to UDO of type document which has a document line user table which is bounded to a matrix within the user form.
when i add a new line to the matrix and press update it works fine. when i change a value in one of the fields of the newly added row and press the update button, i recieve the error message:
"2053 This entry already exists in the following table".
question is what is causing this error and how can it be fixed?
appreciate the help
Yoav

Hi Yoav,
If you run "Restore numbering"from the administration/.../Restore menu it will probably be solved.
Regards
Ad

A/R invoice update error-Entry already exist in ado4

Hi all,
Currently I am using version PL39 when i am trying to update my A/R invoice its giving following error -This entry already exist in following table ado4[message 131-183].
As per my knowledge ado4 is history table for A/R invoices.
Kindly help me.. why this error is coming and how to resolve this error.
Thanks in advance,
Regards,
Jitendra Sali

Jitendra Sali,
I would suggest you escalate this to SAP Support as you wait for an answer from this Forum.
Suda

Error message Entry already exists in UDO

I am working with SAP B1 Release 2005B. The software was working fine for more than 11 months. Now suddenly from last 2 days no entry is getting saved into an UDO. the error message displayed is
' This Entry already exists in the table '(@CREQ) (odbc-2035)
I found the same problem addressed in the forum many times but no solution
Kindly help . The data entry into the system is not taking place
Bye

Hi,
for me this sounds like the Numbering File got damaged.
Administration -> Utilities -> Restore -> Restore Numbering File
lg David

Entry Already exists in the follwoing table : Error

SBO 2007A.
System shows error while entering business partner customer or supplier group as " This entry already exists in the following tables 'Card groups' (OCRG) (ODBC -2035)
kindly help as clinet is unable to create any of the business partner group.

Check if the group exists already by running this query in Query Generator
SELECT * FROM OCRG T0

Hi,Error when adding chart of account This entry already exists in the foll

Hi,
I am getting these below error while adding new chart of account.
This entry already exists in the following tables '' (UDO1) (ODBC -2035) [Message 131-183]
This entry already exists in the following tables 'G/L Accounts' (OACT) (ODBC -2035) [Message 131-183]
please suggest solving . Thanks Advance.
Regards
Rajkumar Gupta

Hi,
You may check this thread:
Re: This entry already exists in the following tables -Message
Also check SAP Note Number: 1054713 to see if it applies to you. It might be a bug too.
Thanks,
Gordon

Error: This entry already exists in the following tables "(ALR2)(ODBC -2035

Dear Expert,
I can not prepare Sales Order and Purchase Order in SAP B1-2007 SP 1(Both Documents Having on Approval ), due to following system error.
System Error:
This entry already exists in the following tables "(ALR2)(ODBC -2035) [Message 131-183]
Kindly check it and provided me solution.

Hi,
Check This
This Entry already in following tables "AIT1) (ODBC-2035) [message 131-183]
Regards
Deepak Tyagi

Inventory Revaluation Error : This entry already exists in the foll.table

Dear community members,
For Inventory Revaluation, we have used Primary Series for fiscal
year2008-2009( April2008 -March2009) and total number of documents
posted last fiscal yr are 43(Primary 1 to Primary 43)
Starting Fiscal year 2009-2010(April2009-March2010), we havedefined
series 09-10 (First Number 1) and assigned it to current fiscal year
(Period Indicator 09-10), but when we are trying to post first
Inventory Revaluation documnet for fiscal year 09-10 (Series 09-
10,documnet number 1) , system gives an error "This entry already
exists in following table(OMRV)
Please provide the solution ASAP
Regards,
Mukesh Agrawal

Hi,
You can check the similar settings in the Demo database and if the issue is not reproduced, it can be a database corruption.
Probably, you need to log a support Ticket to SAP in order to get your issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

ERROR ENTRY ALREADY EXIST

WHEN I CREATING NEW BP AS CUSTOMER,AT THE TIME OF SAVE RECORD ERROR MESSAGE SHOW THAT :-ENTRY ALREADY EXIST.
I HAVE UNIK BP CODE(IT IS NOT IN DATABASE)
Edited by: Sandeep Sharma on Aug 2, 2008 1:36 PM

HI,
The Business Partner code cannot be the sames as G/L Account code, otherwise the Financial Booking is not working.
Example:
> G/L Account Code: 11010000
> You are not able to add a BP with code 11010000.
You can test with the following query:
SELECT AcctCode,'G/L' as Place FROM OACT T0 WHERE T0.[AcctCode] = N'[%0]'
UNION ALL
SELECT CARDCODE, 'BP' as Place from OCRD T0 where T0.[CardCode] = N'[%0]'
Regards,
J.

Error when updating Budget-This entry already exists...Budget (OBGT)

SAP 2007A SP00 PL49
When updating Budget, get following error:
This entry already exists in the following tables 'Budget' (OBGT) (ODBC-2035) [Message 131-183]
Any ideas?
Thanks,
Ajay Audich

Hi,
Vitor Vieira,
Thank you that your answer helped me solving my problem to some extent.
I solved the problem by creating document and document lines table and creating a UDO with it. Because the problem was with assigning some data to the u201CCodeu201D field when using master type tables.
I didnu2019t get any problem after using the document and document lines table.
Also,initially I didnu2019t bind the # column of my matrix with the LineID field of table. After doing that it is working fine and I am able to update the records.
But still this is not a proper solution and I didnu2019t get answer for why master type UDO doesnu2019t support updating.
Thanks,
V.M.Nivasini

This entry already exists in the following tables OCRD

I'm trying to create a Business Partner Master Data in SBO2007 SP 01 PL 05 and I got the following error:
This entry already exists in the following tables 'User-Defined Object' OUDO) -(ODBC - 2035) also this error:
This entry already exists in the following tables 'Business Partner' (OCRD) -(ODBC - 2035)
Any idea what should I do ?
I try the restore function, run a RSP task, comment the code in the Transaction Notification and the problem continue and I need to create new Busines Partner Master Data in the database.
Any comment will be useful.
Thanks.
Regards,
Gabriela.

Hi,
If you are trying to create a Business Partner code where the code is same as another added in the database already as a G\L Account, then the error also occurs.
If the issue is not fixed by running the task, it is a database corruption for which further investigation from support is necessary.
Please log a support ticket to get the issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

This entry already exists in the following tables -Message

Hi,
Im getting a [RDN1.WhsCode][line:3], 'This entry already exists in the following tables(ODBC-2035)'
This message is presented frequently in returns and credit memos. Our company uses batch numbers for our items. When the item is returned, is returned to a different warehouse from it was originally delivered, so we change the warehosue in the return form and credit memo form. So we need to click the "create" button in the batch selection window, because there are no batch numbers to be selected.
Any Ideas as how to solve the problem?
Thank you.

Hi,
This entry already exists in the following tables Message is always related to duplicated record creation or application error. For you case, I think it is better to return to original warehouse first and do inventory transfer to the actual return location in the second step.
Thanks,
Gordon

"this entry already exists in the following table "(MSN2)(ODBC-2035)"

Dear All,
Im running the MRP wizard with a multilevel BOM I created and when I run the MRP wizard the first time using the item, it runs through fine and I can view the recommendations. If I run the MRP scenario again using the same item, an error message is displayed "this entry already exists in the following table "(MSN2)(ODBC-2035)"
I have several items in the database with the same description but different item numbers but I dont think this could be the problem.
Any suggestions ?
Thanks,
Indraj.

Dear,
Please try the query in note 930001 below, if you get any result, I would like to recommend you to report
a message for your issue and request a DB fix.
The following error message appears when running the MRP Wizard:
"Violation of primary key constraint" in the MSN2_primary".
In order to confirm whether the above issue affects your DB, please run
the following query:
       Select T0.itemcode, T1.Objectcode, T1.itemcode from OITM T0
       inner join
       (Select 'OITT' ObjectCode, code Itemcode from OITT
       union all
       Select 'ITT1-Father', Father from ITT1
       union all
       Select 'ITT1-Code', Code from ITT1
       union all
       Select 'OWOR', Itemcode from OWOR
       union all
       Select 'WOR1', Itemcode from WOR1
       union all
       Select 'MSN2', Itemcode from MSN2
       union all
       Select 'MSN3', Itemcode from MSN3) T1
       on T0.itemcode = T1.itemcode where
       CONVERT(binary(5000),T0.itemcode) <>
       CONVERT(binary(5000),T1.itemcode)
Thanks & Regards
Apple

Unable to select multiple with holding tax codes. -"This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]"

Unable to select multiple with holding tax codes.
This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]

Hi,
Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
Thanks & Regards,
Nagarajan

Fixing entry already exists . Error in creation of fixed pegging

Similar Messages

Maybe you are looking for