Fixing the "compile error in hidden module: DistMon"
Our computer images are WinXP SP2, with Office XP SP3. Some people have Acrobat 8.12 Pro installed, and 2 of them were getting the above error.
I found some help in the forums about exporting a registry key, etc. On the 1st person, I did all of that and the error was still there. I went into the VBE and saw a PDFMaker.xla module that could not be deleted. So I went to %user profile%\Application Data\Microsoft\Excel\XLSTART\ and deleted the PDFMaker.xla. No more error.
I tested on the 2nd person by just deleting that file, and no more error. They still have the Acrobat toolbar, so it didn't disable that.
I wanted to share this easy fix in case it works for anyone else.
E Powell
Austin, TX
re: Install error PDFX1aSet_PSR_ gravure
Greetings,
My installation of Acrobat Pro 6.0 hangs when it can't find the file PDFX1aSet_PSR_ gravure.pdf. Any ideas about how to fix?
Context clues:
- Acrobat was running fine (as would have the install CD, I believe) until I removed Acrobat due to an unrelated issue using the Windows Install Cleanup program.
- I've uninstalled and reinstalled Reader 8.0; no effect
- The error is also temporally related to getting the following error when opening and closing Excel: "..compile error.. autoexecnew," then "distmon," respectively. I attempted this solution, but failed:
http://www.adobeforums.com/cgi-bin/webx/.3bc307c7
http://support.microsoft.com/?id=307410
- I've uninstalled and reinstalled Office 2003; run repair w/in Excel; no effect
- In Internet Explorer, I can open a PDF successfully, but the following error also appears: "One or more Adobe PDF extensions are disabled. This may impact how PDFs are displayed... enable add-ons [in IE]." However, all the Adobe add-ons are already enabled in IE.
Thanks very much for your ideas.
Similar Messages
-
Hi,
I am getting below wrror while accesing the Ecel:
compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this applicationIIRC essbase is a financial reporting add-in (Hyperion, or something similar?).
This message is telling you that the add-in is not compatible with your current software. You should check with the vendor who provided the essbase add-in. Tell them what version of windows and Excel (and maybe Hyperion) you are using, and get a compatible
version from them...
If you do not need or run essbase/hyperion/etc then you should just remove/disable the add-in. If it doesn't show in your add-in menu, then you may have to do a repair installation or re-install Excel -
" compile error in hidden module: clBExevent bulider "error in BEx
when i go to BEx analyzer screen i could only see the following error message in the popup screen , instead of query creation screen in SAP BW 3.5 NETWEAVER platform.
" compile error in hidden module: clBExevent bulider"
it is a new installation and license was renewed today and since then the problem is persisting.
any suggestions?
regards,
RaviHi Ravi,
This sounds like something that needs to be reported to SAP via the Service Channel.
In normal operation, when you right-click on a query cell BEx Analyzer shows you a context-specific menu, right? The only way that the BEx Analyzer can know that you have right-clicked on a query cell (so that it can show you a context-specific menu) is to "trap" the "right-click event". The way to do this in Excel is to use a class module (thus, the name clBExevent).
If there is a compile error, you can't fix it. SAP will need to fix it and the BEx analyzer add-in for Excel will need to be replaced.
Sorry to have bad news.
- Pete -
Compile Error in Hidden Module:Autoopen
Hello everybody,
I'm having a very annoying problem:
We have an Excel spreadsheet used by several people on the company. After some update made by Microsoft around December past, whis spreadsheet just won't work anymore and Excel shows the message:
"Compile Error in Hidden Module:Autoopen"
I tried some solutions found here and there, but no remedy for the problem. The only solution is uninstall the updates from end of Deceber 13 until now.
Can anyone help me, please ?
Thank you very much !Hi,
According to your description, your issue seems related to the Microsoft Office Security Updates for December 2014, I recommend you try the method and check if it is help:
Delete the EXD files, these extender files will be under the user's profile and may also be in other locations, such as the following:
%appdata%\microsoft\forms
%temp%\excel8.0
%temp%\word8.0
%temp%\PPT11.0
%temp%\vbe
More reference:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/13/forms-controls-stop-working-after-december-2014-updates-.aspx
Microsoft understands the position our customers are in and we are working to find a solution besides a FixIt that can be deployed to remedy the issue. If we have any update, we'll post in the forum. Thanks for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
The error message in excel 2003 : "compile error in hidden module AutoExecNew" could be caused by Adobe Acroate add ins, thats waht microsoft told me.I use windows xp service pack3.I have got reader newest version and photoshop 6.0. With this and also with an older reader version I got the error message when opening excel. what can I do?
Best regards RayIf you have Adobe Reader, you (probably) don't have Adobe Acrobat, a
commercial ($$) product. 5.0 is a very old release.
But you can check if the files are there anyway from long ago. See
http://support.microsoft.com/kb/307410
Aandi Inston -
BI Desktop - compile error in hidden module
Hi,
I realise this is a common and old problem, but I'm having trouble setting up BI publisher desktop on my laptop with:
64 bit
Windows 7
Office 2007
I started with this
https://blogs.oracle.com/xmlpublisher/entry/template_builder_woes
and I've tried these suggestions
compile error in hidden module: module starter (Urgent)
even to the point of removing .NET 4 and re-applying v2
I have re-installed BI desktop quite number of times now, and I've given up trying. Any tips?
ScottHi,
I too was facing the same problem while clicking on the log in button on the Microsoft Word.
I just executed the below command and now I am able to login to Bi Publisher through my Microsoft Word.
Run command prompt as Admin
For 64-bit operating systems, type the following:
Regsvr32 "C:\Windows\SysWOW64\MSCOMCTL.OCX"
For 32-bit operating systems, type the following:
Regsvr32 "C:\Windows\System32\MSCOMCTL.OCX"
Thanks,
Ila -
ADI 7.2.11 - Error "Compile error in hidden module Utils.1"
Hi,
I've got the following Error message , with ADI 7.2.11 , with Excel 2003 and Excel 2007 , while Uploading Journal :
Microsoft Visual Basic Error : "Compile error in hidden module Utils.1"
Note : The following has been checked :
- In Excel 2003 : "Trust access to Visual Basic Project" has been Checked.
- In Excel 2007 : "Trust access to the VBA project object model" has been Checked.Hi Octavio,
Thank's for your Help.
I've checked Note 796512.1 : the following security Updates are not installed : KB936507, KB958690, KB960225. -
Microsoft XL Compile error in hidden module:
When i start and stop MS XL ,it give me this error message i chicked help and got this
Compile error in hidden module: <module name>
A protected module can't be displayed. This error has the following cause and solution:
There is a compilation error in the code of the specified module, but it can't be displayed because the project is protected. Unprotect the project, and then run the code again to view the error.
How i can Unprotect the project, and then run the code again to view the error.Is this an Oracle Database General question?Does it count if Oracle is installed on the machine? What about if an installation CD is near the keyboard?
:-) -
MS Word Compile error in hidden module: trav_surrogate, How do I correct this
Every time I try to open MS Word on my iMac, I get the message: COMPILE ERROR IN HIDDEN MODULE: TRAV_SURROGAE. Please tell me how to get rid of this message or clear up the problem.
Try asking your Microsoft Word question in the Microsoft Office forums where the Office gurus hang out. http://answers.microsoft.com/en-us/mac?auth=1
-
Getting Compile error in hidden module: Module_starter.
Hi,
I am trying to create a report from BIP using OBIEE.
In OBIEE, I have created and saved an Answer.
From MS Word, after logging into BIP, I chose Workspace as "Oracle BI". Then I select the Answer that I had created earlier. When I try to save this answer as Oracle BIP report, I get error "Compile error in hidden module: Module_starter."
Any idea what's going wrong here?Security Update for windows XP (KB936021)
-
BIP in Word having 'Compile error in hidden module'
Hi, I have a question refer to use BIP in Word.
I installed BIP Desktop and I have BIP Toolbar, but when I try use Oracle BI Publisher -> Log On I see:
Compile error in hidden module: UserForm_ProgressBar,
When I try load data I see:
compile error in hidden module: Class_TvwCommon
and so on.
I have Windows XP (SP3), BIP 10.1.3.4, Word 2002.
Where is problem? Can anyone help me out?
Thanks,
PatrickCan you try this?
1) Set the Template Builder for Word Language. After installing BI Publisher Desktop, go to BI Publisher Desktop program menu and set the UI language. Close any running Microsoft Office programs. Steps: All programs -> Oracle BI Publisher Desktop -> Template Builder for Word Language. Select your language and click OK.
Rgds
Chundi -
Compile error in hidden module:A_EEMain
if I open Excel macros in excel 2010, it comes a Error message. Then it should go ahead with Press OK . that Error is there as per below.
"Compile Error in Hidden Module:A_EEMain"
Please give any solution.Make sure you didn’t miss any references.
1. Open the VBE (Alt + F11)
2. From the Tools menu click References
Also you can refer to the links below:
http://www.mrexcel.com/forum/excel-questions/544280-excel-2010-incompatible-code-error.html
http://www.excelforum.com/excel-programming-vba-macros/388193-compile-error-in-hidden-module.html -
Compile error in hidden module: module starter (Urgent)
Hi Experts,
I am trying to logon to my word document template which was working fine before and now i am getting the error compile error in hidden module: module starter any advise or help can be greatly appreciated. I am using word 2010 and OBIEE version 11.1.1.5
Thanks,
RCI was getting same error and able to resolve this problem by following below steps. I have windows 7 and office 2007.
1. Uninstall BI Publisher. Check if all BI Publisher files are clean-up from your computer. Look for template file under C:\Users\UserID\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord and C:\Users\UserID\AppData\Roaming\Microsoft\Word\STARTUP. Recommended cleaning of temp folder under Window directory.
2. re-install BI publisher.
3. Rename MSComctlLib.exd file to MSComctlLib.exd_bak from “C:\Users\UserID\AppData\Roaming\Microsoft\Forms” directory. I have windows7, Path will not be same on other OS. Recommend searching for this file.
4. Restart MS Word, then click on Add-Ins->Oracle BI Publisher->Log On.
Hope this will help.
Edited by: user6107479 on Apr 25, 2012 1:47 PM
Edited by: user6107479 on Apr 25, 2012 1:49 PM -
Compile error in hidden module: AZWizardModul.
Receiving the following error message when opening Office Word 2010:
=========================================================
Microsoft Visual Basic for Applications
Compile error in hidden module: AZWizardModul.
This error commonly occurs when code is incompatible with the
version, platform, or architecture of this application. Click ‘Help; for
information on how to correct this error.
=========================================================
Microsfot Office Word 10 has never been a problem.
Recently purchased a new HP i7 laptop, have had problems since..
Have attempted several online solutions but nothing has worked.Hello StanleyBogacz. I understand that you're encountering this error when launching Word 2010. Is this correct?
The module it is referring to is an Avery Label Wizard template. Do you have Avery Label Wizard? It is not compatible with Office 2010. Here is a Microsoft Answers thread on the topic.
In any case, it would be a good idea to remove this template and attempt to use Word again. Follow these directions as this in a hidden folder within Windows.
Click Start, type "C:\users\\appdata\roaming\microsoft\templates" and press Enter.
Locate the AZWizardModul.
Right click this module and delete it.
Close any Word windows and re-open it.
Verify that the error is no longer there.
The easiest way to find your computer name is to click Start. Then right-click Computer and this will open the System Information window. In the middle area is a section labeled "Computer Name," it will be listed here.
I hope you find this information helpful; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
Compile error in hidden module
During software installationof Microsoft Office 2007 I got the following error. Compile error in hidden module. AZ Wizard Module.
See my reply.
-Jerry
Maybe you are looking for
-
I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to u
-
How do I get the website icon to stay on the desktop?
When I save a webpage to my desktop, via "drag webpage address to desktop", the website icon is replaced by a mozilla icon. How do I get the website icon to stay on the desktop?
-
Currently I have the separate sides listed as "Disc One", "Disc Two", etc, but I'd love it if there was a way to list the sides of a record instead. I just recently got the new Dum Dum Girls record and wanted to list it by side, so the only way I cou
-
How to remove oneself from discussion thread
how do you remove yourself from a discussion thread? i asked a question 6 months ago and i still get updates, i have checked my profile and every alert question i have selected no. ***?
-
I can't figure out why my IPad keeps crashing.
It's not pages I'm worried about It's my app that I just downloaded and every time I try to open it, it shows me a sponsor or it turns black than crashes. I have closed all running apps and powered off. I also delete it and rebooted it. Please help.