Fixing Virtual PC 7 on Corporate LAN with Outlook

I was having problems getting my new Quad with 10.4.3 and VPC 7.0.2 to work properly at home to connect my Outlook using my VPN into work. I tried a bunch of stuff and ran across the following post at Microsoft:
http://support.microsoft.com/kb/824440/
I was not familar with Virtual Switch but did the following which fixed my problem (for now):
I used my powerbook at work with VPN 7.0.2 installed to update first all Windows updates then all Office Updates, then connected to the corporate LAN and synced all my Outlook Folders (about 350 MBs.)
I then copied over the entire VPC file from my Powerbook to my Quad at home (file is user/Documents/Virtual PC List/BaseDrive.vhdp which was 4.5 GBs.)
I opened Windows XP and completely shut down (do not use Save State option.) Then went to settings and clocked Networking and then clicked the Virtual Switch option.)
I rebooted Windows, connected the VPN and Outlook popped right up with mailboxes all ready to go.
This is great as I now can use iMail in OS X at home with all my non-work email accounts working at the same time as being hooked to my corporate LAN through VPC and Outlook with out having to use the VPN option on OS X and looking everything else out.
Hope this helps some one else. . . .

This was not a question but advise.

Similar Messages

Z10 sync with Outlook

Did the recent update include a fix to allow the Z10 to sync with Outlook?
Please advise......

No, not if you're intending to sync with the desktop standalone Outlook.
RIM has stated the ability to transfer your data from Outlook to the Z10 is coming a few weeks (and that was about three weeks ago) and later would come two-way sync with Outlook <> Z10.
So, for now, no.
There are workarounds (some good, some complicated) if you need to ask further questions, please do.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
Max

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

Hyper-V Replication over Dedicated LAN and "is alive" checks over Corporate LAN

I am testing Hyper-V replication to see if it will be a suitable replacement for the ArcServer RHA product. One thing I am struggling with is configuring the replication to use the dedicated LAN, but still have the host servers verify over the corporate
LAN.
I have seen the blogs on how to use a dedicated route and editing the hosts file to get replication to use the dedicated LAN, but that also changes the LAN in which the host servers communicate. It seems to me that if the corporate LAN were to go down
on the master server, I wouldn't be able to fail over the virtual machines to the replica server without first having to connect into the master server through the dedicated LAN of the replica server to shut down the virtual machines.
I need to be able to fail over to the replica server if the corporate network connection on the master server drops without having to go through the extra steps of connecting into the master server first.
Is it possible for the two items to be separated? Can I tell Hyper-V to replicate using one specific IP destination on the dedicated LAN and have the replica server check to see if the master is live over the corporate LAN?

Hi Telrick,
>> It seems to me that if the corporate LAN were to go down on the master server, I wouldn't
be able to fail over the virtual machines to the replica server without first having to connect into the master server through the dedicated LAN of the replica server to shut down the virtual machines.
I want to say that there are "planned fail over" and "unplanned fail over " , the latter applies the primary server crashing (you can select "failover" on "replica server " then the VM will start up ,after the primary
server online again you can do "reverse" )
The point is that you can not use hyper-v replica as a backup (it will lost little data which have not yet been replicated to replica server when "unplanned fail over" happens )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Lync for mac 2011 not working in corporate LAN

Hi guys,
I have a mac client that has newest version 14.0.10 of lync installed. The Mac works on OS X Yosemite
operating system. The problem is that when you connect to corporate LAN, lync never connects and gives
following error:
Sign in to Microsoft Lync failed because the service is not available or you may not be connected to the Internet.
If you share a connection via mobile or connect via outside network, you are able to log in and lync functions properly
I have tried to update root certificate on mac via copying one from windows client, but with no luck.

Hi Itseeker1,
As ErikHMac stated, the new version of Lync for Mac 14.0.11 has been released, you can install it and check if the issue is solved.
I know you have installed the root certificate on Mac, but please check it again and make sure the certificate is issued by an Enterprise Certificate Authority (Internal CA) and
also should be trusted by the Lync Server.
In addition, it looks like an Internet connectivity issue, please try to flush the DNS cache by running the following command.
dscacheutil -flushcache
Hope it can be helpful.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pop/Imap retrieving and redistribute in LAN with OsX Server

It's possible to download mail accounts hosted in my isp and redistribut'em in my lan with OsX Server with it's own mail server?
The scope is not to have a local server mail because we have ADSL and sometimes the line broke up...
We prefere have mail hosted more securely in our external isp.
But an internal mail server is a commodity very useful...
Sorry if the questions is answered before...
Thanks in advance.

Maybe not easy but should work:
http://www.macosxhints.com/article.php?story=2002052509542613
man fetchmail

HT5624 my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account?

my iphone is connected to a old account that i have used in a while i have a new icloud i tried reseting my phone but now i can get in becuase it linked in with my old account how can i fix this so i can log in with my new account i reset my phone but i did it before on my new phone but this old is link to a account that i set up when i was so much younger can you advise what to do?
Thanks

Go into Settings App and turn OFF Find My iPhone. It will ask for your old password, but in the future you can use your new Apple ID account. If you need to reset the old password try this: https://iforgot.apple.com/password/verify/appleid?language=US-EN&returnURL=https ://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext

TS3212 What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."

What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)

http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat

I am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

i am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

Gerald
If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
neither reading nor responding on this User Community
http://www.apple.com/feedback/

LAN with TCP/IP doesn't work

Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very much

Perhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

Hi I am running a dual core Win7 64bit PC with Firefox Regular and Nightly on it. I also have 32bit Win XP Virtual PC on the same PC with Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ??? TIA... Rick...

Hi... I am running a dual core, Win7 64bit PC, with Firefox Regular and Nightly on it... I also have 32bit Win XP Virtual PC on the same PC with Regular Firefox... How do I sync all of them to give me the same bookmarks, history, cookies and passwords ???

I assume that you have separate Profiles for the Release and Nightly installations.
https://support.mozilla.com/en-US/kb/What+is+Firefox+Sync
Add each Firefox Profile to your Sync account as a '''new device'''. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

Any Fix for Syncing with Outlook 2003 - Ringtones are erased

I am not having any problems syncing with Outlook 2003 except that the ringtones I assign to various contacts are erased. Has anyone seen this? Does anyone have a fix for this?

download the desktop manager v4.2 service pack 2 and try again, here is the link
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Fixing Virtual PC 7 on Corporate LAN with Outlook

Similar Messages

Maybe you are looking for