Fixing webcam drivers

i have a hp pavilion dv7 running windows 7 64 bit that has an internal Hp True vision hd webcam. however when i look for it in the drivers its not there, and when i start youcam or whatever the program is called it asks me to turn on my webcam or plug it in. How do i fix this i have alread tried re installing you cam. are there drivers i need if so where can i get them?

Hi,
Please use this to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Need sound and webcam drivers for Satellite A660-156

hi all,
my hard disk was physically damaged and replaced by new one. All data and setting were copied.
But I found that no sound and webcam drivers are installed. I successfully had found them and installed, but still no changes. See sound icon with 'no sound' indication, click on it to fix the problem, but no problems have been found.
Offered to see additional info or close the window. On Toshiba website found two sound drivers, but it doesn't help.
Any idea how to fix that problem?
Thnx in advance!

Hmm I think you shoud ochekc if you have installed all the drivers in the right order:
Here is the one which i found in one thread:
1 Windows 7 64bit
2 QFE KB974332
3 QFE KB974431
4 QFE KB974571
5 QFE KB975467
6 QFE KB975806
7 QFE KB978258
8 QFE KB977620
9 QFE KB975777
10 QFE KB972270
11 QFE KB977609
12 QFE KB979099
13 QFE KB978251
14 QFE KB971468
15 QFE KB975560
16 QFE KB977074
17 QFE KB978207
18 QFE KB978506
19 QFE KB978262
20 QFE KB976422-x64
21 Registry Patch for System Restore V1.00.00
22 PlayReady PC Runtime 1.3
23 TOSHIBA Bulletin Board 1.6.07.0
24 TOSHIBA ReelTime 1.6.06.0
25 Intel Chipset SW Installation Utility 9.1.1.1024
26 Intel Management Engine Interface V6.00.40.1215
27 NVIDIA Display Driver 189.58
28 Intel Turbo Boost Technology Driver 1.1.1.1007
29 Intel Rapid Storage Technology Driver 9.5.7.1002
30 TOSHIBA Supervisor Password Utility 1.63.0.9C
31 TOSHIBA HW Setup Utility 1.63.0.22C
32 TOSHIBA Flash Cards support utility 1.63.0.6C
33 TOSHIBA Value Added Package 1.3.4_64
34 Realtek Audio Driver 6.0.1.6069
35 NVIDIA HD Audio Driver 1.0.9.1
36 Broadcom Wireless LAN Driver V5.60.48.35_DrvOnly
37 Synaptics Touch Pad Driver V15.0.8.1
38 TOSHIBA HDD Protection 2.2.0.4
39 Bluetooth Stack for Windows by Toshiba v7.10.10(T)
40 Realtek LAN Driver V7.013.0112.2010
41 Jmicron Card Reader V1.00.44.01
42 ENE CIR Driver (if available) V3.2
43 YUAN DVB-T/ATSC Tuner Driver (if available) 2.3.3.31
44 TOSHIBA Sleep Utility 1.4.1.1
45 TOSHIBA eco Utility 1.2.11.64
46 Intel Proset 13.1.1.0.1.s64
47 TOSHIBA HDD/SSD Alert 3.1.64.6
48 TOSHIBA Service Station 2.1.40
49 HDMI Control Manager 2.0.0.5.64
50 TOSHIBA Remote Control Manager 3.0.1.0
51 TOSHIBA PC Health Monitor 1.6.0.64
52 TOSHIBA Fingerprint Utility 1.0.2.27
53 ConfigFree 8.0.29
54 TOSHIBA Web Camera Application V1.1.1.15
55 TOSHIBA Face Recognition 3.1.3
56 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
58 PatchFiles PCIIDEREG-1.1
59 PatchFiles TosVolRegulator_x64_1.1

Trackpad: Please fix the drivers.

Dear whoever is responsible for Boot Camp drivers for Windows,
You must know that the trackpad drivers are nearly unusable in Windows, right? Since you go to so much trouble to support Boot Camp, won't you spend a couple days fixing the drivers?
My primary complaint, shared by tons of people, is really simple. Running under Lion or Mountain Lion, as well as in Windows, I always turn off the "tap to click" feature. Some people use it; I don't because I accidentally tap all the time when I'm working. So, it's great that you have the option to turn that off. So far, so good.
Now, if I want to click and drag, it's simple: I just click by holding down the trackpad, physically clicking it with my index finger, and then I drag with my middle finger. Again, great! Works beautifully.
HOWEVER, in Windows/Boot Camp this doesn't work reliably. The very same gesture doesn't function, because often it's interpreted as a right click. If I very slowly and carefully move all my fingers away from the trackpad, click carefully, hold, and then start to gingerly drag, it works ok. But any normal-speed motion is misinterpreted as right-click.
I use right-click (by holding down 2 fingers) all the time -- it's an essential part of operating in Windows. So I'm used to making that work. It's strange that it activates by accident all the time during a drag operation.
Simple fix: just implement whatever algorithm you use in Lion. It works fine. Don't go into right-click mode when I'm trying to do a simple click-drag.
Let me know if you need help writing the drivers, but I'm sure you should be able to ask an intern to add the necessary line of code or two to fix it yourselves, if you can make it a priority.
Thanks in advance,
Eric

namja
NOTE on #1: this is based on a Windows 8.1 setting. By default, there is a delay so that you don't accidentally hit the touchpad while typing (I think this is the reason why). Go into PC Settings and you can change the sensitivity on this or just turn it off.
Are you talking about the options at the button of Mouse and Touchpad settings that has a drop-down for: No delay (always on), Short delay, Medium delay, Long delay and Turn off taps?
I tested all 5 out and didn't notice any difference in the cursor delay. I tested it by slowly moving my finger on the Touchpad until the cursor responds. The slower I move my finger the longer it takes to respond.

Fix of drivers in windows 8

Hi, I'm using windows 8 pro on my macbook air late 2010; and it seems that some of my drivers don't work correctly.
The drivers that don't work correctly on my mac are:
-The built in iSight driver
-The Coprocessor driver
-SM Bus Controller driver
I have already run all the drivers of bootcamp and it seems that those three don't work correctly, so is there any way to fix these drivers issue?
Any help?

Hi KeithWeisshar,
WSD drivers are supplied and supported by Microsoft. The version numbers and dates are not comparable to the numbers and dates for our drivers. While WSD will provide you with basic printing capability and some features, to get the most from your printer, I recommend using the drivers found on our website.
If you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to dectek webcam drivers using JMF

Hi,
I am unable to detect the webcam drivers(civil:\\?\usb#vid_04f2&pid_b119&mi_00#6&18e8659b&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global) using JMStudio.
FYI : jmf.properties is already available in the classpath
whereas using FMJ(fmjstudio) am able to detect the webcam drivers. i realized upon having civil.dll in the fmj library path able to detect the webcam drivers sucessfully.
Please suggest how we can take forward using JMF
Thanks
vijay

user13614010 wrote:
I am unable to detect the webcam drivers(civil:\\?\usb#vid_04f2&pid_b119&mi_00#6&18e8659b&0&0000#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global) using JMStudio.civil://? Not sure JMF supports that...
whereas using FMJ(fmjstudio) am able to detect the webcam drivers. i realized upon having civil.dll in the fmj library path able to detect the webcam drivers sucessfully.FMJ does still JMF doesn't. JMF only works with the VFW api to detect web cams in Windows...

Where do I download Webcam Drivers? (DV4)

I have a Pavilion DV4, and need to get the latest webcam drivers!
Cant find any on the supportpage?
Where do I download it?
/Jocce

create a Windows support software (drivers) CD or USB storage media

GE600 Webcam Drivers

I have recently purchased an MSI GE600 Notebook. I'm looking for the Webcam drivers as Windows 7 Ultimate does not list it under Device Manager. Can someone point me in the right direction go obtain these drivers?
Thank you,
PC

Online manual: http://global.msi.eu/index.php?func=downloadfile&dno=11452&type=manual
Pg 2-13. Fn+F6

[Solved] GS60 Ghost Pro 3K No webcam drivers

I couldn't find them on the downloads page.
No program will recognize it. There's no webcam even listed in devices.
Thanks for any help,
Kevin

Quote from: Britewood;104698
I can't find them either... Wow.. all those drivers and no webcam drivers.
So here is what I found.
For me at least. I had somehow hit FN-F6 and that disables/enables the webcam. Enough that it doesn't show up in devices when disabled (stupid).
So try doing that and checking to see if it works. Hopefully it does.
Kevin

Windows 7 64-bit Webcam Drivers for dv5t-1000

I have to say, the dv5t has been rock solid and performs admirably for the 3+ years that I've had it. In terms of operation it is nearly perfect.
Here's my problem. I upgraded to Windows 7 Ultimate 64. Everything works except for the webcam. It is not detected as an unknown device. To the OS, it appears that it just doesn't exist.
Here's what I have tried:
Installing all the drivers for 32 bit and 64 bit Vista and Win 7 that could possibly related to the webcam to include various iterations of "HP MediaSmart Webcam Software" current, past and old versions for all the related dv5t models. The software will not install due to no detected webcam. I did get version 2.2 to install and it runs but you can't do anything due to no webcam being detected.
Then, I went to the Intel website to ensure I had the most current chipset offered. According to Intel, everything was valid or current except my wired NIC. I updated that. Still, to no avail.
I have done numerous hardware scans and still no detection of webcam. I have all the latest patches from Microsoft and HP where applicable.
I tried to look up the actual manufacturer to the webcam for a model number and work backwards from there, but I was unable to find any info on that.
Contacting customer support didn't yeild any results. (they have been great in the past, btw)
I tried seaching in the HP forums and across the internet. In the forums there are others that do and don't have the same problem but it wasn't clear which flavor of dv5t they had. I tried the solutions offered in the forum but still nothing. The internet didn't get results on this issue either.
The webcam did work with Vista Home 32, the OS that orginally shipped with the laptop and i have tried those drivers too.
If I had to guess the is just some disparity between the OS, webcam or motherboard.
Please, if you have a solution, post and share the wealth.
Really, I am satisfied with the dv5t as it's the only model of that type at the time to offer a 16 x 9 screen (all others were 13 x 8 and WOW what a difference).
Anything definitive to resolve this would be great.
Thank you in advance for your time on this.
This question was solved.
View Solution.

In device manager tick Show hidden devices, under view on the toolbar.
If DM cannot see it you cannot install a driver, not sure why that hardware will not get detected.

How i can download hp pavilion webcam drivers for window 8.1 pro os?

please tell me how can i download hp pavilion webcam driver for os window 8.1 pro i am using in my laptop

Hi,
Could you mention the product and model of the system for which you want to download drivers of webcam.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Some webcam drivers (Quicktime Components) no longer work in Snow Leopard

I have two webcams, both of which worked before the update to Snow Leopard, both of which no longer work.
They are recognised by their own utility applications and I can see the video, but the QuickTime components used to transport this video to other programs eg Skype, simply do not work.
Does anyone know why this is? Is there anything that can be done about it?
Is it something about QuickTime that got removed or changed in the update? Can this be rectified? Does it require the vendors of these webcams to rewrite their drivers (I can't see why they should)?
The webcams in question are:
Microsoft LifeCam VX-1000, previously working via a Sonix driver for the chipset it uses, that was modified to recognise the product ID of the device. Partially working with Macam.
Creative PD1000, previously working with the Macam component.
Macam works, just not the QuickTime component.
Any help at all would be greatly appreciated.

K T wrote:
Have you updated Skype to the snow leopard compatible version?
Yes. Nothing to do with Skype, although latest version of Skype has huge problems on it's own anyway.
Many plug-ins need to be updated, and I wouldn't be surprised if you had a codec involved that might need updating as well...
Well that does seem to be the case, although I can't see webcam manufacturers updating their legacy products' drivers just for SL.
Does it require the vendors of these webcams to rewrite their drivers (I can't see why they should)?
You don't? Do you know about the 64-bit capabilities that are now part of Snow Leopard?
Uh, yes, but surely 32-bit plugins still work? System Preferences does just fine with 32-bit preference panes.. surely they wouldn't just yank out support for hundreds of old webcams without saying anything?
I'd really like to get Apple's official take on what's going on here. in the Macam forums, soo many people are reporting broken webcams under Snow Leopard.

Creative Webcam Drivers for Vi

Hello!
I purchased a Creative Li've! Ultra for Notebooks webcam (the one here: http://www.creative.com/products/product.asp?category=244&subcategory=253&product=4 9&nav=3) back in November when I first came to college. It worked extremely well for me on Windows XP.
I recently upgraded to Vista Home Premium, and was wondering whether there were going to be drivers for Vista for this device. I see that it is one of three cameras that are still on sale on Creative's website, and hope that it will be updated. Can anyone tell me if there is a timeframe for an updated Vista driver?
I would definitely like to use it on Vista. If that is not possible, I will probably have to give it away and buy another brand, unfortunately.

mre9brg wrote in message news:<[email protected]>...
> Hello,
> I'm trying to make an application with my USB webcam and LabVIEW/IMAQ.
> Unfortunately I haven't been successfull in aquiring the video stream
> to LabVIEW. Are there any drivers available for LabVIEW 7.0?
I am unaware of a USB driver, but I have successfully used the
firewire drivers (although with some issues of setting it up) that NI
sells here:
http://sine.ni.com/apps/we/nioc.vp?cid=12892〈=US

MSI 370i Webcam Drivers?

I have a MSI 370i Webcam, any driver for this one?? I can't find anything! I want to use in my Macmini i5!! Any ideas??

Hmmm, I didn't think you needed drivers for UVC USB Video Class compliant ones?
http://www.msi.com/product/mm/StarCam-370i.html
Might try MacCam...
http://www.macupdate.com/app/mac/9087/macam
http://webcam-osx.sourceforge.net/
And I don't it on the list here, but might work...
http://ioxperts.com/products/webcamx.html
http://ioxperts.com/devices/supportedvideo.html#usb

How can I use my camcorder as a webcam (drivers)?

My camcorder used to work fine as a webcam.
I would plug it into the usb via an adapter and it would show up on skype as s-video or composite selection
I installed this echofx software and it came up with a logo over my video so I uninstalled it and now my camcorder does not show up at all so I cannot skype with it anymore.
Is there software for mac to download so my camcorder will show up on skype (or other program) settings again?

Haven't a clue, but suggest contacting the makers of echofx.

Wiped the T42p (2373-GUU) and can't fix the drivers.

Hello,
I'm hoping some of you can help me out with this. It's extremely frustrating. Our old laptop got hit by viruses and I had to wipe it's OS. The problem is, I had no discs so now I can't find the drivers. I've been downloading and installing just about every driver on this site and none of them seem to be the right ones.
System Information:
Windows XP Professional Service Pack 2
Device Details
Ethernet Controller
PCI\VEN_168C&Dev_1014&Subsys_833117AB&REV_01\4&39A85202&0&10F0
Ethernet Controller
PCI\VEN_8086&DEV_101E&Subsys_05491014&REV_03\4&39A85202&0&08F0
Multimedia
PCI\VEN_8086&DEV_24C5&Subsys05371014&Rev_01\3&61AAA01&0&FD
PCI Modem
PCI\VEN_8086&DEV_24C6&Subsys_055A101&REV_01\3&61AAA01&0&FE
Unknown
ACPI\IBM0068\5&2890D699&0
I was trying at first just to get the driver for the network hardware so I could get the computer online so that I could then update the other drivers.
So, if any of you just know which network driver I need, I would appreciate it so much.
Thank you!

Hi Esonnier! Welcome to the Lenovo User Community!
If you are in the right place on the Lenovo Support & download site, you should be getting somewhere with the drivers you downloaded.
First, just checkin: Lenovo driver installs are a two-step process. 1. Double click the download to extract the files (usually to a directory under C:\DRIVERS). 2. Go to the extract directory and run the install (usually double click setup.exe but not always). The instructions have the exact procedure for each driver.
Are you doing the two steps?
Message Edited by bananaman on 06-18-2009 12:36 PM
I don't work for Lenovo. I'm a crazy volunteer!

Fixing webcam drivers

Similar Messages

Maybe you are looking for