Fixup script generation for 12c silent installation

Hi,
I am trying to generate fixup scripts using silent installation of RDBMS 12c
but there are no response files created (as it was for 11g previously)
only scripts for the check in /tmp/CVU_12.1.0.1.0_oracle
At the same time, there are no problems to generate fixup scripts through OUI
and under the directory mentioned above sub-directory fixup generated and
it has XML files to executed by runfixup.sh
Thanks,
Andrey

I was told by MOS that option to generate fixup scripts for RDBMS 12c not available only for GI
And why they did that...

Similar Messages

  • Silent installation of Cloud agent 12c failed on a windows 2003 host

    Hello All,
    I've done multiple installations by silently installing the cloud agent 12c using a response file. However, the configuration portion failed on this one windows 2003 host.
    Has anyone seen this? I've searched on metalink and see other problems like TZ, service already exists, incorrect PERL settings etc..but found nothing that helps so far.
    In log file:
    The action configuration is performing
    The plug-in Agent Configuration Assistant is running
    AgentConfiguration:agent configuration has been started
    Validating OMS_HOST and EM_UPLOAD_PORT
    Performing free port detection..
    AgentConfiguration: Executing emctl deploy agent command...
    AgentConfiguration:agent configuration finished with status = false
    The plug-in Agent Configuration Assistant has failed its perform method
    The action configuration has failed its perform method
    In Agent Deploy log file:
    value passed to dir splitC:/oracle/em/agent_inst
    INFO: length of temp is2
    INFO: Return value:C:
    \/oracle/em/agent_inst
    INFO: ** Agent Port Check completed successfully.**
    INFO: ERROR: The
    Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh
    monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent
    software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in,
    if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-
    in, view the plug-in deployment log C:\oracle\em\agent_inst\install\logs to check if the plug-in
    configuration for the oracle.sysman.oh monitoring plug-in failed.
    INFO:
    INFO: perform - mode
    finished for action: configure
    INFO:
    INFO: You can see the log file: C:\oracle\em\core
    \12.1.0.3.0\cfgtoollogs\oui\configActions2013-12-23_11-07-08-AM.log
    INFO:
    INFO: C:\oracle\em>exit
    /b 3
    INFO: Plugin homes:
    INFO: Plugin homes:
    INFO: C:\oracle\em\core\12.1.0.3.0\oui\bin
    \runConfig.bat ORACLE_HOME=C:\oracle\em\core\12.1.0.3.0 RESPONSE_FILE=C:\oracle\em\core
    \12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML=
    {oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
    SEVERE: ERROR: Agent
    Configuration Failed
    SEVERE: ERROR: Agent Deployment Failed

    Thanks for the reply Rahul.
    I've used that same response file for deployments on other servers without any problem.
    See response file below: (note i've changed the server name)
    ## copyright (c) 1999, 2012 Oracle. All rights reserved.          ##
    ## Specify values for the variables listed below to customize     ##
    ## your installation.                                             ##
    ## Each variable is associated with a comment. The comment        ##
    ## identifies the variable type.                                  ##
    ## Please specify the values in the following format:             ##
    ##         Type         Example                                   ##
    ##         String       "Sample Value"                            ##
    ##         Boolean      True or False                             ##
    ##         Number       1000                                      ##
    ##         StringList   {"String value 1","String Value 2"}       ##
    ## The values that are given as <Value Required> need to be       ##
    ## specified for a silent installation to be successful.          ##
    ## This response file is generated by Oracle Software             ##
    ## Packager.                                                      ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #OMS_HOST:<String> OMS host info required to connect to OMS
    #EM_UPLOAD_PORT:<String> OMS port info required to connect to OMS
    #AGENT_REGISTRATION_PASSWORD:<String> Agent Registration Password needed to
    #     establish a secure connection to the OMS.
    #AGENT_INSTANCE_HOME:<String> Agent instance home is the location of agent state directory.
    #AGENT_PORT:<String> Agent port on which the agent process should be started.
    #b_startAgent:<boolean> Agent will not be started after configuration if the value specified is false.
    #ORACLE_HOSTNAME:<String> Fully qualified domain name of host where is the agent is deployed.
    #s_agentHomeName:<String>Customized Oracle home name for the agent home. Example: s_agentHomeName="agent12gR1"
    OMS_HOST="omshost.company.com"
    EM_UPLOAD_PORT="1159"
    AGENT_REGISTRATION_PASSWORD="complicatedpassword"
    AGENT_INSTANCE_HOME="e:/oracle/em/agent_inst"
    AGENT_PORT="3872"
    b_startAgent=true
    ORACLE_HOSTNAME="targetserver.company.com"
    #s_agentHomeName=<Value Unspecified>
    #s_agentSrvcName:<String> Sets the agent Service Name and this variable can be
    #      used to overrite the agent service name calculated by the install. This is
    #      required for only Windows.
    #      Example:
    #      s_agentSrvcName = "GridAgent"            ;  User specified value
    #s_agentSrvcName=""
    #Please Don't change the values of these variables
    #EM_INSTALL_TYPE:<STRING> install type
    EM_INSTALL_TYPE="AGENT"

  • Urgent: How to do the Silent Installation for J2RE v1.4.1

    Hi guyz,
    Can anyone tell me How to perform Silent Installation of J2RE v 1.4.1.
    I checked out with J2RE V 1.4.2 which supports Silent mode installation but not JRE 1.4.1
    thanks in advance,
    Saurabh Bhatnagar

    Hi People,
    Just found out a site which has information on Silent Installation of JRE 1.4.1 ... but its not a straight fwd one. You need to run the installer atleat once to create a response file which will ecord your actions and you can use it in later installs for a silent installation.
    The article says about Slent installation in JRE 1.3 but I just check it ... and it works perfectly with JRE 1.4.1 also.
    Here's the link
    http://java.sun.com/products/plugin/1.3/docs/silent.html
    Hope it might of help to some of you ......
    regards,
    Saurabh Bhatnagar
    Sasken

  • Error 1719 during Office 2010 Silent installation

    Hi, 
    I have created a logoff vbs script enforced through GPO for a silent installation of office 2010 SP. The main part of the script run the following command: 
    SetupCommand = ShareDir & "\x86\setup.exe /config " & ShareDir & "\x86\ProPlus.WW\config.xml"
    ReturnValue = oShell.run(SetupCommand, 1, True)
    installation files are located on a network share (permissions: full control for everyone)
    The installation seems to work correctly until installation of updates when I get error 1719 Windows Installer service could not be accessed preceded by a warning event 1530: 
    Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.  
    DETAIL - 
    2 user registry handles leaked from \Registry\User\S-1-5-21-682003330-507921405-725345543-4463:
    Process 2760 (\Device\HarddiskVolume2\Windows\System32\msiexec.exe) has opened key \REGISTRY\USER\S-1-5-21-682003330-507921405-725345543-4463
    Process 2760 (\Device\HarddiskVolume2\Windows\System32\msiexec.exe) has opened key \REGISTRY\USER\S-1-5-21-682003330-507921405-725345543-4463\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
    I've tried the script on 5 different hosts and I always get the same error. I've tried once to use the same script at logon and it worked.
    If I run the command manually it works. Do you have any idea why the script is not working at logoff? do you have any workaround to suggest? 

    Hi Michele,
    à
    get error 1719 Windows Installer service could not be accessed
    Please refer to following KB and check if it help you to troubleshoot Windows installer service issue.
    How to troubleshoot issues with Windows installer service
    Based on your description, I understand that you had configure logoff script via Group Policy to install office
    2010. Meanwhile, you had confirmed that logon script will work fine if use same script. So, I guess the script should be correct, there seems to have some issues in Group Policy settings. Please refer to following articles and check relevant log files if find
    more clues.
    Fixing Group Policy problems by using log
    files
    Fixing Scripts policy settings problems
    If anything I misunderstand or any update, please don't hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Looking for what software required for Enterprise Manager Installation

    Hi All,
      I am fairly new in working with Enterprise Manager, Previously used 11g Database Control, but never install Enterprise Manager (OEM). Now due to the increase in databases, I am considering to install OEM (Oracle Enterprise Manager) to list all database (from over 20 Linux severs) to one location.
    I have read documentation and still confused on what should be installed for OEM. I am planning to use OEM 12c Release (12.1.0.4), my current databases are 11gR2 (11.2.0.4 ).
    Could you tell what I need from below list?
    OEM (12.1.0.4)
    Web Logic server (Do I need that separately, or will this be installed with OEM?)
    OEM Agent on all other 20 servers (do I need to install separate software on them? Please guide)
    Any specific version of Java.
    Please guide me if I need any other software or plugin.
    I have already installed oracle software and have created a database by using “Custom” option in DBCA. My server OS is Linux 64 Bit for Enterprise Manager.
    Thanks in Advance.

    Hi,
    You would need 12c OEM cloud control software , Database software(For creating repository) and agent software (For monitoring targets on other hosts)
    Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11g Release 1 (10.3.6) are installed by default with the 12c OMS installation although you do have a option of installing it separately if you want but Oracle strongly recommends using the 12c installation process to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12c.
    Below is the link for Enterprise Manager Cloud Control 12c Architecture
    http://docs.oracle.com/cd/E24628_01/doc.121/e25353/overview.htm#EMCON112
    For 12c OMS installation steps refer to
    http://docs.oracle.com/cd/E24628_01/install.121/e22624/toc.htm
    EM 12c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using GUI Mode (Doc ID 1488154.1)
    For agent installation refer to
    Installing Management Agents Using Add Host Targets Wizard or EM CLI
    http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC181
    Installing agents using other methods
    http://docs.oracle.com/cd/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323
    To download 12c software
    http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
    Regards,
    Rahul

  • JCOP tools ANT script generation

    Hello,
    does JCOP tools plug-in within Eclipse IDE provide facilities for automatic Ant .xml script generation for building the project (i.e. compilation and convertion) like it provides for javadoc generation?
    I can write compilation .xml script for Ant on my own. But what about the convertion to CAP files?
    Best regards,
    Eve

    I do not know of any possibility/task/facility that generates you an ant script. Ant itself is a way to automatize tasks. So I am afraid you need to dive into ant. It's worth it.

  • Integration 10g silent installation will not install WebLogic Workshop

    Hello,
    I am attempting a silent installation, using wli10gR3_win32.exe. I have created a silent.xml using the information on this page: http://download.oracle.com/docs/cd/E13214_01/wli/docs85/install/silent.html.
    I have used that page in the past to successfully create silent installations for versions 8 and 9 of Weblogic, but for version 10g it is not quite working as advertised. I have not found instructions for a silent installation for 10g.
    My silent.xml file contains the following line:
    <data-value name="COMPONENT_PATHS" value="WebLogic Server|WebLogic Workshop|WebLogic Integration|WebLogic Portal" />
    When I run the package with this line, an error is produced in the log file stating that WebLogic Workshop cannot be found.
    When I remove the WebLogic Workshop part of the line then Server, Integration, and Portal all install without errors. Unfortunately, Workshop was requested as well.
    When I run the installation manually, I am offered Workshop as one of the products.
    If somebody can point me to the correct installation documentation or provide the correct syntax for the silent.xml file that would be swell.
    thanks.

    Hi,
    I had faced the same issue today, So I had removed workshop and the installation was successful. But the weird thing is after the installation I could see the "workshop" was installed under BEA_HOME.
    Did any one face the same issue?
    Thanks.
    Vijay Bheemineni.

  • Oracle Client Silent Installation

    I tried to do A Silent Installation with an Oracle Client CD Release 10.1.02
    I record the installation with the command line
    setup.exe -record -destinationFile c:\client.rsp
    then I am installing a custom Installation. every thing seems to be alright.
    then I am installing an Oracle Client with the this responsefile
    setup.exe -silent responseFile c:\client.rsp
    the Installation runs automatically but
    many components are missing such as
    networking; ODBC; OLE DB .....
    Is this a bug in the record of the destinationFile or is there a speciell way to record a custopm installation with all the selected features?
    here the recorded responseFile:
    ## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## identifies the variable type. ##
    ## Please specify the values in the following format: ##
    ## Type Example ##
    ## String "Sample Value" ##
    ## Boolean True or False ##
    ## Number 1000 ##
    ## StringList {"String value 1","String Value 2"} ##
    ## The values that are given as <Value Required> need to be ##
    ## specified for a silent installation to be successful. ##
    ## This response file is generated by Oracle Software ##
    ## Packager. ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #Name : UNIX_GROUP_NAME
    #Datatype : String
    #Description: Unix-Gruppe, die in dem Bestandsverzeichnis festgelegt werden soll. Nur auf Unix-Plattformen gültig.
    #Beispiel: UNIX_GROUP_NAME = "install"
    UNIX_GROUP_NAME=" "
    #Name : FROM_LOCATION
    #Datatype : String
    #Description: Vollständiger Pfad zu products.xml.
    #Beispiel: FROM_LOCATION = "..\stage\products.xml"
    FROM_LOCATION="C:\orainst\stage\products.xml"
    #Name : FROM_LOCATION_CD_LABEL
    #Datatype : String
    #Description: Diese Variable sollte nur in Installationen mit mehreren CDs benutzt werden. Sie umfasst die Beschriftung der CD, auf der die Datei "products.xml" gespeichert ist. Die Beschriftung ist in der Datei "disk.label" in demselben Verzeichnis wie products.xml gespeichert.
    #Beispiel: FROM_LOCATION_CD_LABEL = "CD Label"
    FROM_LOCATION_CD_LABEL=<Nicht festgelegter Wert>
    #Name : ORACLE_HOME
    #Datatype : String
    #Description: Vollständiger Pfad des Oracle-Standardverzeichnisses.
    #Beispiel: ORACLE_HOME = "C:\OHOME1"
    ORACLE_HOME="C:\Oracle\product\10.1.0\Client_1"
    #Name : ORACLE_HOME_NAME
    #Datatype : String
    #Description: Name des Oracle-Standardverzeichnisses. Wird beim Erstellen von Ordnern und Diensten verwendet.
    #Beispiel: ORACLE_HOME_NAME = "OHOME1"
    ORACLE_HOME_NAME="test"
    #Name : TOPLEVEL_COMPONENT
    #Datatype : StringList
    #Description: Die Komponente der obersten Ebene, die während der aktuellen Session installiert werden muss.
    #Beispiel: TOPLEVEL_COMPONENT = {"oracle.client","10.1.0.2.0"}
    TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_SPLASH_SCREEN
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der anfängliche Splash-Screen in OUI angezeigt werden soll.
    #Beispiel: SHOW_SPLASH_SCREEN = true
    SHOW_SPLASH_SCREEN=true
    #Name : SHOW_WELCOME_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Willkommen-Seite in OUI angezeigt werden soll.
    #Beispiel: SHOW_WELCOME_PAGE = false
    SHOW_WELCOME_PAGE=true
    #Name : SHOW_CUSTOM_TREE_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit der benutzerdefinierten Verzeichnisbaumstruktur in OUI angezeigt werden soll.
    #Auf dieser Seite können Abhängigkeiten markiert bzw. Markierungen entfernt werden. Diese Seite wird nur bei benutzerdefinierter Installationsart angezeigt.
    #Beispiel: SHOW_CUSTOM_TREE_PAGE = false
    SHOW_CUSTOM_TREE_PAGE=true
    #Name : SHOW_COMPONENT_LOCATIONS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Verzeichnis der Komponente in OUI angezeigt werden soll.
    #Diese Seite wird nur angezeigt, wenn Produkte vorhanden sind, deren installiertes Verzeichnis geändert werden kann.
    #Wenn Sie diesen Wert auf False festlegen, kann der Benutzer keine alternativen Verzeichnisse angeben.
    #Beispiel: SHOW_COMPONENT_LOCATIONS_PAGE = false
    SHOW_COMPONENT_LOCATIONS_PAGE=true
    #Name : SHOW_SUMMARY_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Übersichtsseite in OUI angezeigt werden soll.
    # Auf dieser Seite wird eine Liste aller während dieser Session zu installierenden Komponenten angezeigt.
    #Beispiel: SHOW_SUMMARY_PAGE = true
    SHOW_SUMMARY_PAGE=true
    #Name : SHOW_INSTALL_PROGRESS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über den Installationsstatus in OUI angezeigt werden soll.
    #Auf dieser Seite wird der aktuelle Installationsstatus angezeigt. Sie werden dabei darüber informiert, welches Produkt installiert und welche Datei gegenwärtig kopiert wird.
    #Beispiel: SHOW_INSTALL_PROGRESS_PAGE = true
    SHOW_INSTALL_PROGRESS_PAGE=true
    #Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den erforderlichen Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste aller erforderlichen Konfigurationsassistenten angezeigt, die Bestandteil der Installation sind.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
    #Name : SHOW_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste der Konfigurationsassistenten angezeigt, die Bestandteil der Installation und so konfiguriert sind, dass sie automatisch gestartet werden.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_CONFIG_TOOL_PAGE = true
    SHOW_CONFIG_TOOL_PAGE=true
    #Name : SHOW_RELEASE_NOTES
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Versionshinweise dieser Installation am Ende der Installation angezeigt werden sollen.
    #Dieses Dialogfeld kann aus dem Register Ende der Installation gestartet werden und enthält die Liste mit Versionshinweisen, die für die gerade installierten Produkte zur Verfügung stehen.
    # In diesem Fall muss auch die Variable SHOW_END_SESSION_PAGE auf True festgelegt werden.
    #Beispiel: SHOW_RELEASE_NOTES = true
    SHOW_RELEASE_NOTES=true
    #Name : SHOW_ROOTSH_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn das Dialogfeld "Bestätigung", in dem die Ausführung des Skripts root.sh gefordert wird, in OUI angezeigt werden soll.
    #Nur auf UNIX-Plattformen gültig.
    #Beispiel: SHOW_ROOTSH_CONFIRMATION = true
    SHOW_ROOTSH_CONFIRMATION=true
    #Name : SHOW_END_SESSION_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Ende der Session in OUI angezeigt werden soll.
    #Auf dieser Seite wird angezeigt, ob die Installation erfolgreich abgeschlossen wurde.
    #Beispiel: SHOW_END_SESSION_PAGE = true
    SHOW_END_SESSION_PAGE=true
    #Name : SHOW_EXIT_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Bestätigung beim Beenden von OUI angezeigt werden soll.
    #Beispiel: SHOW_EXIT_CONFIRMATION = true
    SHOW_EXIT_CONFIRMATION=true
    #Name : NEXT_SESSION
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer zu dem Register Dateiverzeichnisse zurückgehen können, um eine weitere Installation vorzunehmen. Dieses Flag muss außerdem auf True festgelegt werden, um eine weitere Antwortdatei zu verarbeiten (siehe NEXT_SESSION_RESPONSE).
    #Beispiel: NEXT_SESSION = true
    NEXT_SESSION=false
    #Name : NEXT_SESSION_ON_FAIL
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer eine andere Session aufrufen können, auch wenn die aktuelle Installations-Session nicht erfolgreich war. Dieses Flag ist nur relevant, wenn NEXT_SESSION auf True festgelegt wurde.
    #Beispiel: NEXT_SESSION_ON_FAIL = true
    NEXT_SESSION_ON_FAIL=true
    #Name : NEXT_SESSION_RESPONSE
    #Datatype : String
    #Description: Gibt optional den vollständigen Pfad der Antwortdatei der nächsten Session an. Wenn nur ein Dateiname angegeben wird, wird die Antwortdatei aus dem Verzeichnis <TEMP>/oraInstall abgerufen. Diese Variable ist nur aktiv, wenn NEXT_SESSION auf True festgelegt ist.
    #Beispiel: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
    NEXT_SESSION_RESPONSE=<Nicht festgelegter Wert>
    #Name : DEINSTALL_LIST
    #Datatype : StringList
    #Description: Liste der Komponenten, die während einer Deinstallations-Session deinstalliert werden sollen.
    #Beispiel: DEINSTALL_LIST = {"oracle.client","10.1.0.2.0"}
    DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_DEINSTALL_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Deinstallationsbestätigung während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_CONFIRMATION = true
    SHOW_DEINSTALL_CONFIRMATION=true
    #Name : SHOW_DEINSTALL_PROGRESS
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der Deinstallationsfortschritt während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_PROGRESS = true
    SHOW_DEINSTALL_PROGRESS=true
    #Name : ACCEPT_LICENSE_AGREEMENT
    #Datatype : Boolean
    #Description: Wenn Sie für diese Variable True festlegen, stimmen Sie dem Lizenzvertrag zu. Diese Variable wird nur für vollautomatische Installationen verwendet.
    #Beispiel: ACCEPT_LICENSE_AGREEMENT = true
    ACCEPT_LICENSE_AGREEMENT=false
    #Name : SELECTED_LANGUAGES
    #Datatype : StringList
    #Description: Sprachen, in denen die Komponenten installiert werden.
    #Component : oracle.client
    SELECTED_LANGUAGES={"de","en"}
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installationsart der Komponente.
    #Component : oracle.client
    INSTALL_TYPE="Benutzerdefiniert"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # netca, : Oracle Net-Konfigurationasssistent
    # netca_deinst, : Oracle Net-Konfigurationsassistent - Skript deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"netca"}
    #Component : oracle.networking.netca
    oracle.networking.netca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # vipca, : Virtual Private IP-Konfigurationsassistent
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"vipca"}
    #Component : oracle.options.ops.vipca
    oracle.options.ops.vipca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # LocalConfig, : Oracle Cluster Synchronization Service deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"LocalConfig"}
    #Component : oracle.options.ops.csscommon
    oracle.options.ops.csscommon:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : s_recodHTTPPort
    #Datatype : String
    #Description: HTTP listener port for the recod service
    #Component : oracle.cartridges.ordmts
    s_recodHTTPPort="2030"

    I tried to do A Silent Installation with an Oracle Client CD Release 10.1.02
    I record the installation with the command line
    setup.exe -record -destinationFile c:\client.rsp
    then I am installing a custom Installation. every thing seems to be alright.
    then I am installing an Oracle Client with the this responsefile
    setup.exe -silent responseFile c:\client.rsp
    the Installation runs automatically but
    many components are missing such as
    networking; ODBC; OLE DB .....
    Is this a bug in the record of the destinationFile or is there a speciell way to record a custopm installation with all the selected features?
    here the recorded responseFile:
    ## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## identifies the variable type. ##
    ## Please specify the values in the following format: ##
    ## Type Example ##
    ## String "Sample Value" ##
    ## Boolean True or False ##
    ## Number 1000 ##
    ## StringList {"String value 1","String Value 2"} ##
    ## The values that are given as <Value Required> need to be ##
    ## specified for a silent installation to be successful. ##
    ## This response file is generated by Oracle Software ##
    ## Packager. ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #Name : UNIX_GROUP_NAME
    #Datatype : String
    #Description: Unix-Gruppe, die in dem Bestandsverzeichnis festgelegt werden soll. Nur auf Unix-Plattformen gültig.
    #Beispiel: UNIX_GROUP_NAME = "install"
    UNIX_GROUP_NAME=" "
    #Name : FROM_LOCATION
    #Datatype : String
    #Description: Vollständiger Pfad zu products.xml.
    #Beispiel: FROM_LOCATION = "..\stage\products.xml"
    FROM_LOCATION="C:\orainst\stage\products.xml"
    #Name : FROM_LOCATION_CD_LABEL
    #Datatype : String
    #Description: Diese Variable sollte nur in Installationen mit mehreren CDs benutzt werden. Sie umfasst die Beschriftung der CD, auf der die Datei "products.xml" gespeichert ist. Die Beschriftung ist in der Datei "disk.label" in demselben Verzeichnis wie products.xml gespeichert.
    #Beispiel: FROM_LOCATION_CD_LABEL = "CD Label"
    FROM_LOCATION_CD_LABEL=<Nicht festgelegter Wert>
    #Name : ORACLE_HOME
    #Datatype : String
    #Description: Vollständiger Pfad des Oracle-Standardverzeichnisses.
    #Beispiel: ORACLE_HOME = "C:\OHOME1"
    ORACLE_HOME="C:\Oracle\product\10.1.0\Client_1"
    #Name : ORACLE_HOME_NAME
    #Datatype : String
    #Description: Name des Oracle-Standardverzeichnisses. Wird beim Erstellen von Ordnern und Diensten verwendet.
    #Beispiel: ORACLE_HOME_NAME = "OHOME1"
    ORACLE_HOME_NAME="test"
    #Name : TOPLEVEL_COMPONENT
    #Datatype : StringList
    #Description: Die Komponente der obersten Ebene, die während der aktuellen Session installiert werden muss.
    #Beispiel: TOPLEVEL_COMPONENT = {"oracle.client","10.1.0.2.0"}
    TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_SPLASH_SCREEN
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der anfängliche Splash-Screen in OUI angezeigt werden soll.
    #Beispiel: SHOW_SPLASH_SCREEN = true
    SHOW_SPLASH_SCREEN=true
    #Name : SHOW_WELCOME_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Willkommen-Seite in OUI angezeigt werden soll.
    #Beispiel: SHOW_WELCOME_PAGE = false
    SHOW_WELCOME_PAGE=true
    #Name : SHOW_CUSTOM_TREE_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit der benutzerdefinierten Verzeichnisbaumstruktur in OUI angezeigt werden soll.
    #Auf dieser Seite können Abhängigkeiten markiert bzw. Markierungen entfernt werden. Diese Seite wird nur bei benutzerdefinierter Installationsart angezeigt.
    #Beispiel: SHOW_CUSTOM_TREE_PAGE = false
    SHOW_CUSTOM_TREE_PAGE=true
    #Name : SHOW_COMPONENT_LOCATIONS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Verzeichnis der Komponente in OUI angezeigt werden soll.
    #Diese Seite wird nur angezeigt, wenn Produkte vorhanden sind, deren installiertes Verzeichnis geändert werden kann.
    #Wenn Sie diesen Wert auf False festlegen, kann der Benutzer keine alternativen Verzeichnisse angeben.
    #Beispiel: SHOW_COMPONENT_LOCATIONS_PAGE = false
    SHOW_COMPONENT_LOCATIONS_PAGE=true
    #Name : SHOW_SUMMARY_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Übersichtsseite in OUI angezeigt werden soll.
    # Auf dieser Seite wird eine Liste aller während dieser Session zu installierenden Komponenten angezeigt.
    #Beispiel: SHOW_SUMMARY_PAGE = true
    SHOW_SUMMARY_PAGE=true
    #Name : SHOW_INSTALL_PROGRESS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über den Installationsstatus in OUI angezeigt werden soll.
    #Auf dieser Seite wird der aktuelle Installationsstatus angezeigt. Sie werden dabei darüber informiert, welches Produkt installiert und welche Datei gegenwärtig kopiert wird.
    #Beispiel: SHOW_INSTALL_PROGRESS_PAGE = true
    SHOW_INSTALL_PROGRESS_PAGE=true
    #Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den erforderlichen Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste aller erforderlichen Konfigurationsassistenten angezeigt, die Bestandteil der Installation sind.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
    #Name : SHOW_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste der Konfigurationsassistenten angezeigt, die Bestandteil der Installation und so konfiguriert sind, dass sie automatisch gestartet werden.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_CONFIG_TOOL_PAGE = true
    SHOW_CONFIG_TOOL_PAGE=true
    #Name : SHOW_RELEASE_NOTES
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Versionshinweise dieser Installation am Ende der Installation angezeigt werden sollen.
    #Dieses Dialogfeld kann aus dem Register Ende der Installation gestartet werden und enthält die Liste mit Versionshinweisen, die für die gerade installierten Produkte zur Verfügung stehen.
    # In diesem Fall muss auch die Variable SHOW_END_SESSION_PAGE auf True festgelegt werden.
    #Beispiel: SHOW_RELEASE_NOTES = true
    SHOW_RELEASE_NOTES=true
    #Name : SHOW_ROOTSH_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn das Dialogfeld "Bestätigung", in dem die Ausführung des Skripts root.sh gefordert wird, in OUI angezeigt werden soll.
    #Nur auf UNIX-Plattformen gültig.
    #Beispiel: SHOW_ROOTSH_CONFIRMATION = true
    SHOW_ROOTSH_CONFIRMATION=true
    #Name : SHOW_END_SESSION_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Ende der Session in OUI angezeigt werden soll.
    #Auf dieser Seite wird angezeigt, ob die Installation erfolgreich abgeschlossen wurde.
    #Beispiel: SHOW_END_SESSION_PAGE = true
    SHOW_END_SESSION_PAGE=true
    #Name : SHOW_EXIT_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Bestätigung beim Beenden von OUI angezeigt werden soll.
    #Beispiel: SHOW_EXIT_CONFIRMATION = true
    SHOW_EXIT_CONFIRMATION=true
    #Name : NEXT_SESSION
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer zu dem Register Dateiverzeichnisse zurückgehen können, um eine weitere Installation vorzunehmen. Dieses Flag muss außerdem auf True festgelegt werden, um eine weitere Antwortdatei zu verarbeiten (siehe NEXT_SESSION_RESPONSE).
    #Beispiel: NEXT_SESSION = true
    NEXT_SESSION=false
    #Name : NEXT_SESSION_ON_FAIL
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer eine andere Session aufrufen können, auch wenn die aktuelle Installations-Session nicht erfolgreich war. Dieses Flag ist nur relevant, wenn NEXT_SESSION auf True festgelegt wurde.
    #Beispiel: NEXT_SESSION_ON_FAIL = true
    NEXT_SESSION_ON_FAIL=true
    #Name : NEXT_SESSION_RESPONSE
    #Datatype : String
    #Description: Gibt optional den vollständigen Pfad der Antwortdatei der nächsten Session an. Wenn nur ein Dateiname angegeben wird, wird die Antwortdatei aus dem Verzeichnis <TEMP>/oraInstall abgerufen. Diese Variable ist nur aktiv, wenn NEXT_SESSION auf True festgelegt ist.
    #Beispiel: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
    NEXT_SESSION_RESPONSE=<Nicht festgelegter Wert>
    #Name : DEINSTALL_LIST
    #Datatype : StringList
    #Description: Liste der Komponenten, die während einer Deinstallations-Session deinstalliert werden sollen.
    #Beispiel: DEINSTALL_LIST = {"oracle.client","10.1.0.2.0"}
    DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_DEINSTALL_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Deinstallationsbestätigung während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_CONFIRMATION = true
    SHOW_DEINSTALL_CONFIRMATION=true
    #Name : SHOW_DEINSTALL_PROGRESS
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der Deinstallationsfortschritt während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_PROGRESS = true
    SHOW_DEINSTALL_PROGRESS=true
    #Name : ACCEPT_LICENSE_AGREEMENT
    #Datatype : Boolean
    #Description: Wenn Sie für diese Variable True festlegen, stimmen Sie dem Lizenzvertrag zu. Diese Variable wird nur für vollautomatische Installationen verwendet.
    #Beispiel: ACCEPT_LICENSE_AGREEMENT = true
    ACCEPT_LICENSE_AGREEMENT=false
    #Name : SELECTED_LANGUAGES
    #Datatype : StringList
    #Description: Sprachen, in denen die Komponenten installiert werden.
    #Component : oracle.client
    SELECTED_LANGUAGES={"de","en"}
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installationsart der Komponente.
    #Component : oracle.client
    INSTALL_TYPE="Benutzerdefiniert"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # netca, : Oracle Net-Konfigurationasssistent
    # netca_deinst, : Oracle Net-Konfigurationsassistent - Skript deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"netca"}
    #Component : oracle.networking.netca
    oracle.networking.netca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # vipca, : Virtual Private IP-Konfigurationsassistent
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"vipca"}
    #Component : oracle.options.ops.vipca
    oracle.options.ops.vipca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # LocalConfig, : Oracle Cluster Synchronization Service deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"LocalConfig"}
    #Component : oracle.options.ops.csscommon
    oracle.options.ops.csscommon:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : s_recodHTTPPort
    #Datatype : String
    #Description: HTTP listener port for the recod service
    #Component : oracle.cartridges.ordmts
    s_recodHTTPPort="2030"

  • Grid Control 10.2.0.1.1 Silent Installation Problem

    I seem to be having issue installing Grid Control 10.2.0.1.1; I am using the silent install with existing database method and for some reason, the installation process is not using some variable I have specified in the response file.
    My operating environment is as follows
    Redhat Enterprise Linux 5.2 [Tikanga] - 32bit
    Repository: Oracle Database 11gR2Variables that I have specifed in the response file and are not being used are below.
    >
    s_mgmtTbsName="/u02/oradata/emrep/oradata/mgmt.dbf"
    s_ecmTbsName="/u02/oradata/emrep/oradata/mgmt_ecm_depot1.dbf"
    >
    slientInstall log has the following entries
    silentInstall2010-08-18_01-15-29-PM.log
    *** Error Dialog: OUI-10150:Error: The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory. in component Oracle Enterprise Manager Grid Console 10.2.0.1.1 . Installation cannot continue for this component. ***
    User Selected: S&top installation of this component only.
    The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory.
    This silent installation was unsuccessful.installActions log file has the following entries
    INFO: Setting variable 's_mgmtTbsName' to '/u01/app/oracle/product/oms10g/oradata/mgmt.dbf'. Received the value from the variable calculation.
    INFO: Calling Query fileQueries10.1.0.3.0  exists
    filename = /u01/app/oracle/product/oms10g/oradata
    INFO: Query Returned: false
    User Selected: S&top installation of this component only.
    The file system location /u01/app/oracle/product/oms10g/oradata does not exist. Please enter the path of an existing directory.
    This silent installation was unsuccessful.Regard,
    Phiri

    [oracle@oracledba Disk1]$ cat response/em_using_existing_db.rsp
    ## copyright (c) 1999, 2004 Oracle. All rights reserved.          ##
    ## Specify values for the variables listed below to customize     ##
    ## your installation.                                             ##
    ## Each variable is associated with a comment. The comment        ##
    ## identifies the variable type.                                  ##
    ## Please specify the values in the following format:             ##
    ##         Type         Example                                   ##
    ##         String       "Sample Value"                            ##
    ##         Boolean      True or False                             ##
    ##         Number       1000                                      ##
    ##         StringList   {"String value 1","String Value 2"}       ##
    ## The values that are given as <Value Required> need to be       ##
    ## specified for a silent installation to be successful.          ##
    ## This response file is generated by Oracle Software             ##
    ## Packager.                                                      ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #Name       : UNIX_GROUP_NAME
    #Datatype   : String
    #Description: Unix group to be set for the inventory directory. Valid only in Unix platforms.
    #Example: UNIX_GROUP_NAME = "install"
    UNIX_GROUP_NAME="oinstall"
    #Name       : FROM_LOCATION
    #Datatype   : String
    #Description: Complete path to the products.xml.
    #Example: FROM_LOCATION = "../stage/products.xml"
    FROM_LOCATION="/u02/orasoft/gc_10201/Disk1/rdbms/Disk1/stage/products.xml"
    #Name       : FROM_LOCATION_CD_LABEL
    #Datatype   : String
    #Description: This variable should only be used in multi-CD installations. It includes the label of the compact disk where the file "products.xml" exists. The label can be found in the file "disk.label" in the same directory as products.xml.
    #Example: FROM_LOCATION_CD_LABEL = "CD Label"
    #FROM_LOCATION_CD_LABEL="EM10g"
    #Name       : BASEDIR
    #Datatype   : String
    #Description: Directory where the ORACLE_HOMES gets created
    #Example: BASEDIR = "C:\OHOME1" or BASEDIR = "/scratch/OracleHomes"
    BASEDIR="/u01/app/oracle/product"
    #Name       : INSTALLATION_NAME
    #Datatype   : String
    #Description: Oracle Home Name. Used in creating folders and services.
    #Example: INSTALLATION_NAME = "OHOME1"
    INSTALLATION_NAME="oms10g"
    #Name       : NEXT_SESSION
    #Datatype   : Boolean
    #Description: Set to true to allow users to go back to the File Locations page for another installation. This flag also needs to be set to true in order to process another response file (see NEXT_SESSION_RESPONSE).
    #Example: NEXT_SESSION = true
    NEXT_SESSION=true
    #Name       : NEXT_SESSION_ON_FAIL
    #Datatype   : Boolean
    #Description: Set to true to allow users to invoke another session even if current install session has failed. This flag is only relevant if NEXT_SESSION is set to true.
    #Example: NEXT_SESSION_ON_FAIL = true
    NEXT_SESSION_ON_FAIL=true
    #Name       : DEINSTALL_LIST
    #Datatype   : StringList
    #Description: List of components to be deinstalled during a deinstall session.
    #The following choices are available. The value should contain only one of these choices.
    #The choices are of the form Internal Name, Version : External name. Please use the internal name and version while specifying the value.
    #    oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
    #    oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
    #    oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
    #Example: DEINSTALL_LIST = {"oracle.sysman.top.agent","10.2.0.0.0"}
    DEINSTALL_LIST={"oracle.sysman.top.oms","10.2.0.1.1"}
    #Name       : SHOW_DEINSTALL_CONFIRMATION
    #Datatype   : Boolean
    #Description: Set to true if deinstall confimation is needed during a deinstall session.
    #Example: SHOW_DEINSTALL_CONFIRMATION = true
    SHOW_DEINSTALL_CONFIRMATION=true
    #Name       : SHOW_DEINSTALL_PROGRESS
    #Datatype   : Boolean
    #Description: Set to true if deinstall progress is needed during a deinstall session.
    #Example: SHOW_DEINSTALL_PROGRESS = true
    SHOW_DEINSTALL_PROGRESS=true
    #Name       : REMOVE_HOMES
    #Datatype   : StringList
    #Description: List of the homes to be removed during a deinstall session. Each home is represented by its full path.
    #Example: REMOVE_HOMES = {<full_path_of_home1>,<full_path_of_home2>, ...}
    REMOVE_HOMES=<Value Unspecified>
    #Name       : ACCEPT_LICENSE_AGREEMENT
    #Datatype   : Boolean
    #Description: By setting this variable to true, you are accepting the license agreement. This variable is used only for silent installations.
    #Example: ACCEPT_LICENSE_AGREEMENT = true
    ACCEPT_LICENSE_AGREEMENT=true
    #Name       : TOPLEVEL_COMPONENT
    #Datatype   : StringList
    #Description: The top level component to be installed in the current session.
    #The following choices are available. The value should contain only one of these choices.
    #The choices are of the form Internal Name, Version : External name. Please use the internal name and version while specifying the value.
    #    oracle.sysman.top.agent, 10.2.0.0.0 : Oracle Management Agent 10.2.0.0.0
    #    oracle.sysman.top.em_seed, 10.2.0.0.0 : Oracle Enterprise Manager Repository Database 10.2.0.0.0
    #    oracle.sysman.top.oms, 10.2.0.0.0 : Oracle Enterprise Manager Grid Console 10.2.0.0.0
    #Example: TOPLEVEL_COMPONENT = {"oracle.sysman.top.agent","10.2.0.0.0"}
    TOPLEVEL_COMPONENT={"oracle.sysman.top.oms","10.2.0.1.1"}
    #Name       : SELECTED_LANGUAGES
    #Datatype   : StringList
    #Description: Languages in which the components will be installed.
    #The following choices are available. The value should contain only one of these choices.
    #The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.
    #    en,   : English
    #    de,   : German
    #    es,   : Latin American Spanish
    #    es_MX,   : Mexican Spanish
    #    es_ES,   : Spanish
    #    fr,   : French
    #    fr_CA,   : Canadian French
    #    it,   : Italian
    #    iw,   : Hebrew
    #    ja,   : Japanese
    #    ko,   : Korean
    #    pt_BR,   : Brazilian Portuguese
    #    zh_CN,   : Simplified Chinese
    #    zh_TW,   : Traditional Chinese
    #Example: SELECTED_LANGUAGES = {"en"}
    #SELECTED_LANGUAGES={"en"}
    #Name       : COMPONENT_LANGUAGES
    #Datatype   : StringList
    #Description: Languages in which the components will be installed.
    #The following choices are available. The value should contain only one of these choices.
    #The choices are of the form Internal Name : External name. Please use the internal name while specifying the value.
    #    en,   : English
    #    de,   : German
    #    es,   : Latin American Spanish
    #    es_MX,   : Mexican Spanish
    #    es_ES,   : Spanish
    #    fr,   : French
    #    fr_CA,   : Canadian French
    #    it,   : Italian
    #    iw,   : Hebrew
    #    ja,   : Japanese
    #    ko,   : Korean
    #    pt_BR,   : Brazilian Portuguese
    #    zh_CN,   : Simplified Chinese
    #    zh_TW,   : Traditional Chinese
    #Example: COMPONENT_LANGUAGES = {"en"}
    #Component  : oracle.sysman.top.oms
    COMPONENT_LANGUAGES={"en"}
    #Name       : s_reposHost
    #Datatype   : String
    #Description: Hostname of the Repository database
    #Component  : oracle.sysman.top.oms
    #Example    :s_reposHost="stadv26.us.oracle.com"
    s_reposHost="oracledba"
    #Name       : s_reposPort
    #Datatype   : String
    #Description: Port on which the Repository database is running
    #Component  : oracle.sysman.top.oms
    #Example    :s_reposPort="1521"
    s_reposPort="1521"
    #Name       : s_reposSID
    #Datatype   : String
    #Description: SID or Service name  of the Repository database
    #Component  : oracle.sysman.top.oms
    #Example    :s_reposSID="emrep"
    s_reposSID="emrep"
    #Name       : s_reposDBAPwd
    #Datatype   : String
    #Description: Password of DBA user used to create repository schema
    #Component  : oracle.sysman.top.oms
    # Example   : s_reposDBAPwd="password"
    s_reposDBAPwd="emgc10g"
    #Name       : s_mgmtTbsName
    #Datatype   : String
    #Description: Mgmt tablespace name
    #Component  : oracle.sysman.top.oms
    #This will get created on the machine where the database is present
    #So make sure that the directory given here is present in the machine where the database exists
    #ORACLE_HOME/oradata/mgmt.dbf
    #Example   : s_mgmtTbsName=/scratch/OracleHomes/oradata/mgmt.dbf
    s_mgmtTbsName="/u02/oradata/emrep/oradata/mgmt.dbf"
    #Name       : s_ecmTbsName
    #Datatype   : String
    #Description: ECM tablespace name
    #Component  : oracle.sysman.top.oms
    #This will get created on the machine where the database is present
    #So make sure that the directory given here is present in the machine where the database exists
    #ORACLE_HOME/oradata/mgmt_ecm_depot1.dbf
    #Example    : s_ecmTbsName=/scratch/OracleHomes/oradata/mgmt_ecm_depot1.dbf
    s_ecmTbsName="/u02/oradata/emrep/oradata/mgmt_ecm_depot1.dbf"
    #Name       : b_emailSelected
    #Datatype   : Boolean
    #Description: Whether to receive automatic threshold notification email
    #Component  : oracle.sysman.top.oms
    #Example    : b_emailSelected=false/true
    b_emailSelected=<Value Unspecified>
    #Name       : s_emailAddress
    #Datatype   : String
    #Description: Address to receive threshold notification email, this will be effected only when b_emailSelected=true
    #Component  : oracle.sysman.top.em_seed
    s_emailAddress=<Value Unspecified>
    #Name       : s_emailServer
    #Datatype   : String
    #Description: SMTP gateway used to send threshold notification email, this will be effected only when b_emailSelected=true
    #Component  : oracle.sysman.top.em_seed
    s_emailServer=<Value Unspecified>
    #Name       : b_metalinkSelected
    #Datatype   : Boolean
    #Description: Whether MetaLink connection was configured
    #Component  : oracle.sysman.top.em_seed
    #Example    : b_metalinkSelected=false/true
    b_metalinkSelected=<Value Unspecified>
    #Name       : s_metalinkUser
    #Datatype   : String
    #Description: user name for MetaLink access, this will be effected only when b_metalinkSelected=true
    #Component  : oracle.sysman.top.em_seed
    s_metalinkUser=<Value Unspecified>
    #Name       : s_metalinkPassword
    #Datatype   : String
    #Description: password for MetaLink access, this will be effected only when b_metalinkSelected=true
    #Component  : oracle.sysman.top.em_seed
    s_metalinkPassword=<Value Unspecified>
    #Name       : b_proxySelected
    #Datatype   : Boolean
    #Description: Whether proxy connection was configured
    #Component  : oracle.sysman.top.em_seed
    #Example: b_proxySelected=false/true
    b_proxySelected=<Value Unspecified>
    #Name       : EM_PROXYUSER
    #Datatype   : String
    #Description: User name for proxy access,this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_PROXYUSER=<Value Unspecified>
    #Name       : EM_PROXYREALM
    #Datatype   : String
    #Description: Server providing proxy access, this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_PROXYREALM=<Value Unspecified>
    #Name       : EM_PROXYPASSWORD
    #Datatype   : String
    #Description: Password for proxy access, this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_PROXYPASSWORD=<Value Unspecified>
    #Name       : EM_PROXYHOST
    #Datatype   : String
    #Description: Server providing proxy access, this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_PROXYHOST=<Value Unspecified>
    #Name       : EM_DONTPROXYFOR
    #Datatype   : String
    #Description: Domains which should not use proxy access, this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_DONTPROXYFOR=<Value Unspecified>
    #Name       : EM_PROXYPORT
    #Datatype   : String
    #Description: Port for proxy access, this will be effected only when b_proxySelected=true
    #Component  : oracle.sysman.top.em_seed
    EM_PROXYPORT=<Value Unspecified>
    #Name       : s_securePassword
    #Datatype   : String
    #Description: Password for secure communication with Management Server
    #Component  : oracle.sysman.top.oms
    #Example    : s_securePassword="password"
    s_securePassword="emgc10g"
    #Name       : s_securePasswordConfirm
    #Datatype   : String
    #Description: Confirmation of password for secure communication with Management Server
    #Component  : oracle.sysman.top.oms
    #Example    : s_securePasswordConfirm="password"
    s_securePasswordConfirm="emgc10g"
    #Name       : b_lockedSelected
    #Datatype   : Boolean
    #Description: Whether agent communication should be locked
    #Component  : oracle.sysman.top.oms
    #Example    : b_lockedSelected=true/false
    b_lockedSelected=false
    #Name       : s_reposPwd
    #Datatype   : String
    #Description: Password of repository schema owner
    #Component  : oracle.sysman.top.oms
    #Example    : s_reposPwd="password"
    s_reposPwd="emgc10g"
    #Name       : s_reposPwdConfirm
    #Datatype   : String
    #Description: Password for repository schema owner
    #Component  : oracle.sysman.top.oms
    #Example    : s_reposPwdConfirm="password"
    s_reposPwdConfirm="emgc10g"
    #Please Don't change the values of these variables
    n_firstInstanceValidation=2
    n_firstReposValidation=1
    n_firstReposPwdValidation=2
    n_firstSecureValidation=2
    n_firstVldnEmailSer=2
    #Name       : b_upgrade
    #Datatype   : Boolean
    #Description: To Specify whether it is Normal Install or Upgrade
    #Component  : oracle.sysman.top.oms
    #PLEASE DON'T CHANGE THIS VALUE
    b_upgrade=false
    #Name       : b_showOptConfigPage
    #Datatype   : Boolean
    #Description: whether to perform optional configuration
    #Component  : oracle.sysman.top.oms
    #PLEASE DON'T CHANGE THIS VALUE
    b_showOptConfigPage=TRUE
    #Name       : s_installType
    #Datatype   : String
    #Description: Type of Grid Control install being performed
    #Component  : oracle.sysman.top.oms
    #PLEASE DON'T CHANGE THIS VALUE
    s_installType="NOSEED"
    [oracle@oracledba Disk1]$

  • BO31 Silent Installation

    Hi,
    Can any one share their experience in silent installation ,
    How it works in BO ? I know in DataStage  we go for a dummy manual installation and get the response file created and we use the same file for further installations  is it the same way we have here , I have only manual installation experience in BO.
    I tried going through the installation document but I am not clear yet.
    May be a step by step information  is very helpfull .
    Thank you,
    Neo.

    http://help.sap.com/content/bobj/bobj/index.htm  - Install guide has all the rigth steps for silent install.
    I'm not sure how else to describe it.
    maybe you can post a specific step from that guide that you need help with ?
    For my silent installs I like  "Install with responce file" method.

  • Silent installation of Adobe RoboHelp 7

    I've been asigned to build a package for a silent
    installation of Adobe RoboHelp V7.
    The installation itself was successful but during the first
    start of one feature (RH for Word or HTML)
    the user is asked to enter a valid key.
    I've tried to avoid this process using the command
    C :> msiexec /qn /L* “<Log file>” /I
    “<Path to RoboHelp MSI file>”
    SERIALNUMBER=<serial number>
    but it did'nt work.
    Any ideas for the reason? Thanks in advance for your help.
    Gromminger

    Sorry, I thought that item included the additional
    information you will find in this article.
    http://www.adobe.com/devnet/robohelp/articles/before_install.html
    You will see that the user does have to enter the serial
    number.
    You may want to report this to bump the priority for fixing.
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Silent installation of Teamviewer

    Hello,
    i am still looking for a silent installation of Teamviewer using MDT 2012.
    /s is not enough.
    Anybody with a full option?
    Thx

    Do you have a license  with teamviewer or are you using the free version? If you have license you can download the msi from the downloads section which will make deployment much easier.
    http://www.teamviewer.com/en/download/msi.aspx?version=8
    If not you can try this.
    Download the program (preferably the latest version) ..or ..if you have it on your hard drive , open it... (AND LET IT OPEN!
    DO NOT CLOSE OR INSTALL THE APLICATION. JUST DUBLE-CLICK IT!!)
    Then , go to C:\Documents
    and Settings\Administrator\Local Settings\Temp. There you'll see a folder called TeamViewer. Open that folder. Inside
    you'll have 2 files. Teamviewer.exe and tvinfo.ini
    Copy the Teamviewer from that folder and paste wherever you want. After this you can close the other application. 
    With the new teamviewer.exew which you copyed from the temp folder , u can run it sillently. Use the /S Switch. Works with WPI
    also. 

  • Uninstall Labview after Silently installation

    I installed Labview 7.1 using the silently installation and I need to do an uninstall like this (Using a .BAT file), for the Silently installation I used the Spec files attached.
    In order to have a complete custom installation I also had to run separate the device drivers setup with its own spec file.
    I already tried to uninstall using this same spec files changing for each feature to = Absent (This is suppose to remove if installed) but it doesn't completely uninstall. The Data Socket and the NI Spy remain.
    Thank you in advance
    Attachments:
    LVspec.txt ‏1 KB

    Hello EJPEREZ,
    After further investigation, it appears that DataSocket is still present on the system because the LabVIEW Runtime Engine is still installed. To verify this, open the control panel, double-click on add/remove programs, select National Instruments Software, click on change and you will see a list of National Instruments Software that is installed on the computer. You can use this method to find out which NI Software product is leaving NI Spy on your computer as well.
    Uninstalling the LabVIEW Runtime Engine will remove DataSocket from your computer. The way to do this from the command line is to use msiexec and the LabVIEW Runtime Engine MSI file. The command will look something like "path:\>msiexec /quiet /uninstall lvruntimeeng.msi" depending on your preferences and file locations. MSIexec is a Microsoft Windows utility and you can get more information about it on there website (http://www.microsoft.com). If you need more information about the commmand line parameters for msiexec, just type in "msiexec" in the command line and hit the "enter" key. The LabVIEW Runtime Engine msi can be found on your installation cd in the "components\lvruntimeeng\" folder.
    Make sure you run this command AFTER you do the core uninstallation using the "setup.exe LVspect.txt /q" operation. Then you can use msiexec to uninstall the program that is leaving NI Spy on your computer.
    I hope this helps,
    E.Lee
    Applications Engineer
    National Instruments
    Eric
    DE For Life!

  • ORA-01017: invalid username/password;  for  Oralce 12c OEM  installation

    Hi Experts,
    Following error Oralce 12c OEM installation ,i have no clue sys user passowrd is correct in response/new_install.rsp file
    [oracle@sdp12 OEM_Packages]$ ./runInstaller -silent -responseFile /oracle/oracle8/OEM_Packages/response/new_install.rsp
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 400 MB. Actual 1222 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 4000 MB Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-02-24_06-22-19PM. Please wait ...[oracle8@sdp38 OEM_Packages]$
    ERROR: ERROR:Exception occurred while connecting to database. Check the connection details of the database you specified and retry.
    ORA-01017: invalid username/password; logon denied
    Unable to connect to the database and validate whether it is a supported database due to one of the following reasons:
    (1) Incorrect credentials
    (2) Listener may be down
    (3) Database may be down
    Check the credentials ,the status of the listener and the database and retry.
    i am able to connect using same username password
    [oracle8@sdp38 response]$ sqlplus sys/sys512@TET1
    SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 24 18:29:15 2013
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL>
    From response/new_install.rsp file
    DATABASE_HOSTNAME=sdp12
    LISTENER_PORT=1521
    SERVICENAME_OR_SID=TET1
    SYS_PASSWORD=sys512
    SYSMAN_PASSWORD=sysman512
    SYSMAN_CONFIRM_PASSWORD=sysman512
    i have no clue here, any help greatly appropriated
    thanks

    few things you can check :
    a) Is there a password file ? Is the password correct in it ?
    b) SYSDBA remote login is disabled. remote_login_passwordfile is not set to EXCLUSIVE in the spfile or init.ora.
    Set: remote_login_passwordfile= EXCLUSIVE
    Create a password file:
    Unix: $
    orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=sys entries=5
    Windows:
    C:\> orapwd file=%ORACLE_HOME%\database\pwd%ORACLE_SID% password= sys entries=5
    To synchronize the password for sys for normal connections and connections as sysdba connect as a sysdba user and reset the sys password:
    $ sqlplus "/ as sysdba" SQL> ALTER USER SYS IDENTIFIED BY change_on_install;

  • PDQ - Create Silent installation for EXE install package

    The first question is: Do you have the free version or paid for version of PDQ Deploy? This will make a little difference in your approach for deployment.For the .net part, just download the off line installer for the version you want to deploy. This will be in a .exe form just append the /quite /norestart options to the command line. No need to check if .net is already installed, the installer will just exit if there is nothing to do.For your application, you need to find out if there is a silent install option.For the registry you can just export the registry keys in question with regedit. then in your installer action/script just run the following command regedit.exe /s .regYou can add this all to the install sequence if you have the paid for version or in a .cmd file in the same location as the other install files in your packages...

    Hi,
    I got EXE file for installation
    want to create it a silent installation for deplying it to 100 computers.
    needs to check if Dot.Net 4.5 already install and if not install it before installing the EXE
    after Installing the EXE need to Activate it using Reg file
    how to create all this procces to be installed Silent mode
    Thanks.
    This topic first appeared in the Spiceworks Community

Maybe you are looking for

  • How to insert rows from an  xml file to a table

    im Using Oracle 11g It is showing below error when i execute.. declare charString varchar2(80); finalStr varchar2(400) := null; rowsp integer; v_FileHandle UTL_FILE.FILE_TYPE; begin -- the name of the table as specified in our DTD xmlgen.setRowsetTag

  • How to create logical fact table in BMM layer ?

    Hello, I have 3 Dimension table - 2 are in one schema and last is another schema. Using this 3 dimension tables, I need to create a logical fact table. So, my question is whether we can create this fact table by joining these 3 dimension table which

  • Smb protocol problem after upgrading to IOS 8

    Hi, I use SMB protocol to connect to Windows share folders in our company. Using IOS 7 on the iPad was working great until i upgrade one iPad to IOS 8. I can't connect using SMB protocol on the iPad with IOS 8. With an iPad with IOS 7 still works gre

  • Grid and objects at angle from the artboard

    Hi there... My issue is that the grid, and any shapes (such as a simple rectangle) are at a slight angle to the artboard - see the picture to see what I mean... The artboard has horizontal and vertical sides but the grid is off at an angle. And as yo

  • No X11 DISPLAY variable

    Hi , I am trying to start the Admin ACC from dynadmin. But when i click Start ACC in server VM . I am getting following error. The ATG Control Center could not be started. Dynamo received the following error message from the JVM: java.awt.HeadlessExc