FKPE1 - Create additional document FI-CA
Hi all,
I have a problem in FI-CA.
When I post a document with FPE1 I want to create another document automatically.
I have seen that it is possible with events (trx FQEVENTS).
Probably the event i have to use are 10, 20 , 30. I have implemented 10 , 30. In event 30 i call fm FKK_CREATE_DOC_ADDITIONAL, but the system dump for an error message (Internal errore: lock missing for modification..).
Anyone know how these event work?
Thanks,
enzo
Were you able to make these events work. I am getting short dump MESSAGE_TYPE_X.
Please suggest .
Similar Messages
-
Created a Document : Waiting for moderation - Status display will be a good addition
Hi SCN Support Community,
i had created a document a week ago, Since this is my first attempt to give back to the community , I am very impatient about when this will be published ( as its under moderation). I understand from the FAQs of Pre-moderation section that we have volunteers to moderate content and it takes roughly 3 days. I also understand that there is no way to check the status of my document till i get the relevant notification. However i feel it will be really helpful if we have in the portal where we can atleast see the status ..doesnt matter if it says "Under- Moderation" (there might be a reason why scn has opted away from this , if there isnt any, why not .
Thanks & Regards,
TashiHi Tashi Norbu,
Your document is released now. Thanks for sharing your experience with a good document.
Here is your document WebDynpro ALV: Editable ALV using Property Binding(Without dedicated boolean attributes)
Keep participating in SCN. -
Beyond being seriously annoyed at an Apple Employee recommended we go the NAS route at an Apple Store no less—only to find it doesn't work for storage OR Time Machine backups of iPhoto (after spending weeks organizing/transferring date, outside of a good deal of coin)—we are now perplexed as how to set up/store based on our needs.
Goals
Create additional storage (iPhoto, iTunes, documents) for the family laptop
Accessible by anyone/device on the home network (iPad, mini iPad, iPhones, etc..)
Would prefer the ability to access this offsite as well
Backup of the laptop
Backup of the storage HD
Ensure we do not lose iPhoto libraries data/files
Here is what I am thinking—need to know if it will work.
Purchase two HDs
Plug them into my base station
Allocate one HD @2T for storage (additional iPhoto libraries, home movies, iTunes libraries, etc...)
Partition the second HD @3T to handle two Time Machine backups
(a) Time Machine of the laptop (up to 1T of backups)
(b) Time Machine of the first HD (up to 2T of backups) - Is this possible?
What I need to know is
Is it possible to partition a HD to Time Machine two backups from different sources—one being a HD?
If this is not a good solution—what is? I am pulling my hair out trying to figure out how to deal with a lot of data related to iPhoto due to the formatting limitations there.While most do not advocate mixing Time Machine backups with other files, I have 3 Time Capsules with files and backups on the same partition and have never had a problem despite doing it for many years. All 3 Time Capsule are set up as NAS devices.
One Time Capsule holds the Snow Leopard partition backup of two computers. The other two each have a backup of the Mountain Lion partition of two computers. Time Machine is set up to alternate between the devices, which it can now do. On these 2 Time Capsules is a copy of the iTunes Library and a copy of the iPhotos Library, which provides a backup for the two. Every so often I manually copy the new files from the primary iTunes/iPhotos library to the backup on the other Time Capsule.
If the computer is on, I can access the computer from my iPad and then access the hard drives and the files.
Hopefully, I have been able to make this clear. -
Managers can't see their employees when creating apprisal documents in Performance Management
Hi All,
I'm looking for you experts to enlighten me regarding an issue with the SAP Performance Management solution. We have recently (2013) implemented the Performance Management solution and everything has worked as expected. Now, we are in the process where the managers create the employees appraisal documents for the evaluation of the year 2013. The issue we are encountering is that managers who have been transfer to a new organizational unit are not able to see the employees which they supervised before the transfer.
Currently our company has an structural profile which is assigned to all the managers and supervisors, and this profile gives access to the employees which are assign to the manager or supervisor. In addition we have an MSS role for managers and supervisors, and here we added the authorization object P_HAP_DOC to authorize manager to perform the PM process.
Why the managers/supervisors who have been transfer are not able to see their employees?
Your help is greatly appreciated.
Santhiel RamosThank you for your response,
Yes, as the manager (appraiser) I have created the document in documents_todo.htm.
I went to t-code phap_admin_pa and the document exists. The manager's name and employee's name are listed and the status is listed as In Process.
When I use t-code phap_start_bsp, then documents_received_open2.htm and log in as the employee, there are no documents listed.
I am not sure what is missing Any more ideas? -
Bug: Create New Document From Current State (Win 7 HomePremium SP1)
1. Open a new document, any size you want, any bit mode you want
2. Click on the Text tool and write something
3. Add a new layer mask do the text layer and fill it black or something else. Just something you can visualize if you'd took it off.
4. Unblock the layer mask from the layer so you can move tha layer mask separate from the text
5. Go to your history pannel and click "Create new document from current state"
Result: You'll notice that the layer mask is gone from your text, even though it had something in it.
This only seems to happen with text layers
Expected Result: Everything should stay exactly the same, as it's a duplicate from the current state.
System Info:
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:11, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2493 MHz
Built-in memory: 3071 MB
Free memory: 723 MB
Memory available to Photoshop: 1674 MB
Memory used by Photoshop: 100 %
Image tile size: 132K
Image cache levels: 4
Photoshop crashed on 29-03-2012 at 19:49:02 (AllocateSharedGLResources)
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 4600 Series
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1360
Video Card Number: 1
Video Card: ATI Radeon HD 4600 Series
OpenCL Unavailable
Driver Version: 8.632.1.2000
Driver Date: 20090817000000.000000-000
Video Card Driver: atiumdag.dll,atidxx32.dll,atidxx64,atiumdva.cap,atiumd64,atiumd6a,atitmm64
Video Mode: 1360 x 768 x 4294967296 colors
Video Card Caption: ATI Radeon HD 4600 Series
Video Card Memory: 512 MB
Video Rect Texture Size: 8192
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\Motta\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 228,7G, 28,9G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Viveza 2 2.0.2.10710
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins:
Camera Raw 7.0
Color Efex Pro 3.0 Complete 3.1.10.8263
Color Efex Pro 4 NO VERSION
Color Efex Pro 4 NO VERSION
HDR Efex Pro 1,20
HDR Efex Pro Metadata 1,20
Merge to HDR Efex Pro 1,20
Nik Selective Tool 2.1.0.15202
Noiseware Professional 4.2.0.5
Silver Efex Pro 2 2,0
Silver Efex Pro 2 2,0
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEYep, that existed in CS5 as well.
We'll log a bug on it. -
Create DMS document from direct object transaction instead of CV01N
Dear Experts,
I have raised an issue for the same thing in past and got helpful reply also. However it is not working here. I have searched enough but did not get satisfactorily answer.
My requirement here is to create and store DMS document directly from the object attached to DMS document type instead of CV01N e.g. create PR ME51N, create project CJ20N etc.
So far I have done the required configuration to get create option in transaction while entering DMS document number. I kept document description field as an optional for respective document type and created and assigned role in Define profile step. Number range is internal. So I think all necessary configuration in place. Now problem here is when I am clicking on create easy document icon, it ask me to select document type and file from local machine also. But nothing is happening afterwards and document is not getting created and stored. Transaction return on screen without any number and so. Please help me out. Did I miss anything?
Looking forward for your reply. Points will be allocated for answer.
Best Regards,
BhagatHi Bhagat,
Select the document type in question,navigate to "Define object links".Please verify if the following values have been maintained:
Screen no-233
When new version-1
Create document-1
Document version-1
Additional functions-checked
Post this,re-test the scenario and share the results.Also,do confirm if you are able to create documents of the above document type using CV01n transaction successfully.
Regards,
Pradeepkumar Haragoldavar -
Is it possible to do this? I need to create a document so that I can export as a high quality CMYK for print and export the same file as RGB jpeg / pdf for web and email use. Do I have to create the document with 2 different colourspaces, or can I change / convert the colourspace after I have created and finished the document? or is there some simple way to select an RGB / CMYK option when saving/exporting?
look forward to your reply!
TomTom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller. -
Hello good people of the Adobe Community! I have a user of Adobe Reader XI that is having the following problem:
She is viewing, what we will call, the "main document," and this document has many links to other PDF documents. When she clicks on one of the links, the main document gets replaced by the new document. She then needs to re-open the main document to view it again. This happens with every link she clicks. I worked with the document in Reader XI and am able to open every link as an additional document, thus allowing me to immediately view both the main document and the new document.
My questions are:
Is there some setting in her Reader that I do not have turned on/off, which is why she is having this issue and I am not?
If not, then why is the user experiencing this "replacement" of the main document?
How do I help her resolve this issue?
Thank you for your time and attention.
BenI don't know if there is any way to configure this in the Reader preferences.
However, it can be decided in the document itself. I just created a test document (using Acrobat DC) with two links:
one to open in the same window
on the open in a new window
Both links do what I selected:
one opened in the same Reader window (replacing the original document)
the other one opened a new Reader window
When creating the links there was actually a third option: Window set by user preferences. However, I cannot seem to find such a user preference in Adobe Acrobat Reader. The default (in my case) seems to be to open in the same Reader window. -
I have iWorks 9 that includes Pages 4.3. I created a document and saved it as a "pages" file. When I tried to open the document the next day, a dialogue box told me I needed a newer version to open the file. The information provided stated the new app would cost $19.99 and the customer ratings are quite low. Why can't I open a previously created document in iWorks, regardless of the version. This is the first time Apple has demanded that I pay for a new version to open existing documents.
I am with Peter on this issue. Additionally, if you installed the latest IOS Pages (v2.01) on an iPhone or iPad and opened a .pages file on iCloud that was created by Pages ’09 v4.n, or IOS Pages v1.7.n — that document is now in the new .pages file format and only Pages v5 on OS X can open it.
-
"Create Simple document" from other objects
Scenario: Creating a document using option "Create Simple document" from other objects
I have created a document type and defined the object link for Functional Location with option "create simple document"
When clicking on create icon on the additional data tab on IL02 screen, The system asks for the document type and then the file to be uploaded.
The document type that i have defined has the Description filed as mandatory field and hence i am not able to create the document.
However, for the Document type when i set the description field as not mandatory the system creates DIR. But this DIR has no description.
Please let me know if there is a BADI, using which i could set the Functional location name as the description OR if there is some enhancement by which the user is asked to enter the description when creating the document.
Warm Regards,
Vivek MohankumarHi Vivek,
After my tests I would like to inform you that this is
the standard system behavior as the document description field is
maintained as mandatory in transaction DC10. Please note that for the
simple creation of documents this should not be set as a mandatory
field.
The creation mode can be defined in transaction DC10 for each object
under 'Define object links'.
Please note that the value "1" for the creation of documents is used
to enable a user to simple attache a word file to an object
without going to the transaction CV01n. Therefore the system behaviour
is different then creating a document by CV01n and attaching a
file to it. With simple creation mode there should not be any
mandatory fields as the user cannot enter anything during the creation
process.
However, you can change the behaviour how the document is created by
MM02 transaction if you change the customizing in transaction DC10
like this:
If you maintain the value "2" for creation of documents, the user is
put to transaction CV01n and then the description can be entered. So
maybe this would solve the issue.
Regarding a useful BADI I can only recommned you to test BADI DOCUMENT_OBJ1,
DOCUMENT_OBJ2 or DOCUMENT_MAIN01 for fill the description field.
I hope this information could be useful for you and help to avoid the
mentioned error message.
Best regards,
Christoph -
Error creating WEBI document in InfoView
Hey all,
I'm hoping there's someone out there that can help me with the issue I'm currently experiencing when trying to create a new WEBI document from within InfoView.
Environment: Windows Server 2003 SP2, BOE XIR3.1SP3, CR2008, MS SQL Server 2005
Using the Designer I've created as simple a universe as I believe you can... ODBC connection to DB, one table, and no modifications to object properties (ie. field names, descriptions, etc.). I saved the Universe in the Enterprise repository (have also tried saving to local disk) and exported the Universe.
In the CMC I granted schedule rights to the Universe for UserA.
When I logon to InfoView as UserA I am able to select the New | Web Intelligence menu option on the Document List screen and am presented with the Universe selection screen. I select the universe created in the designer and the system attempts to create a new WEBI document. It gets to the point where it is launching new document and I received the error below...
An internal error occured while calling 'createDocument' API. (Error: ERR_WIS_30270)
The preferences for WEBI in InfoView are: View Format - Web; Creation/Edit Tool - Advanced.
Now for a couple of twists...
1) When I first created a single table universe after the issue first appeared on a more complex universe, I was able to create new WEBI documents without issue. When I tried adding an additional table to the simple universe I experienced the issue above and have been unsuccessful ever since even with new single table universes.
2) If I logon to InfoView as an administrator (or make UserA an administrator) I can create new WEBI documents with no problems on any of my universes (simple or complex).
I have read other posts related to this error and have tried the suggestions that have been put forth to no avail. It appears to be an issue with security settings but I have been unsuccessful in identifying what those settings might be. If anyone has any suggestions or can provide a breakdown of the security settings required to give users the necessary access to create WEBI documents from universes I would be grateful.
As a side point, I have implemented complex universes at other clients without this issue appearing at other sites.
Thanks!Hi,
May be you can try with full control rights on universe and connection.After that check yor are getting error or not.this issue with one user or with all users except administrator.
Thanks,
Amit -
How do I automatically create additional chapter menus in Encore
I have built a menu in Photoshop. It has four window frames which will represent the chapters from 1 - 4 and will be motion menus. I have brought it into Encore CS4 and verified that it will work. I am able to select each window which are labeled Chapter 1, Chapter 2, Chapter 3, and Chapter 4. I am also able to link each window to a chapter in my timeline, render it, and each window does show motion video correctly.
What I am now trying to do, is to add additional menus for the remaining chapters of the video. I am unable to figure out how to do this without going back to Photoshop and creating a new menus which show the additional chapters, and then bringing them into encore as additional menus.
From what I have read, it seems that encore is supposed to be able to do that for me automatically. One of the ways I tried was to go to the menu section and try to create a menu index, and when I click on that, I get a window that opens up and a window opens up which says "The chapter index could not be created because the current menu does not contain any chapter buttons." Perhaps I am not understanding that message correctly. When I select the different chapter areas on the menu, a selection window does surround that area. I thought that indicated that this area was a button. Can someone help me understand what I'm doing wrong?Hi Bill,
Thank you. I will use your procedures, however h
ere is the place where I read about the automation I was attempting. Am I reading it wrong about what I can do with this procedure? It appears to allow me to take my original menu and using the steps shown, Encore will create additional menus and links all my additional chapter points.
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=automatically%20create%20chap ter%20menu&cat=support
It is the first article shown in this PDF document. The second page shows the procedure I was attempting. It is the second paragraph titled "Automate Chapter Button Creation". Terry -
Photoshop won't open or create new documents, works breifly after full windows restart.
Hi everyone,
I am having an issues with photoshop becoming unresponsive. After about 10 minutes Photoshop will not open or create a document.
I've spent hours trying to fix this with no results. I've spent time on Nvidia's forums and tried downgrading the driver back to 275.33 with the same results. I've disabled opengl in photoshop with the same results. This error occurs on both CS5 and CS6 versions of photoshop. I've tried reinstalling photoshop (not removing and reinstalling, just reinstalling).
I can't tell if it's a photoshop issue or a Nvidia issue. I've read countless threads on this forum and can't find any help. Please help.
I've made this video to show you the issues. Thank you for your help
Video of issue - http://screencast.com/t/kG1YgmQ7
Windows 7 x64
Nvidia GTX 275 v296.10
12gb DD3 Ram
Adobe Photoshop CS5/CS6Hi,
I'm having the same trouble as OP: Photoshop opens but will not create a new document or open an existing one. In addition to that, I've noticed that if you hammer on ctrl+n enough times and manage to actually get a document open, PS won't save it but will go through the motions of doing so.
There have been quite a few reports of this issue now over the last year or so and they seem specific to PS CS5 and up. They all remain unresolved. This is actually an easily searchable issue now.
http://forums.adobe.com/message/3986474
http://forums.adobe.com/thread/911210
http://forums.adobe.com/thread/912268
http://forums.adobe.com/thread/915994
I'm currently working on a big project across the suite and all the other Adobe applications are running fine.
I have tried all the suggested fixes with no result. One other issue that did become apparent, was re-installing PS. After uninstallation, the Adobe installer kept encountering "Exit Code 7" when trying to reinstall PS. The only way around this in the end seemed to be removing all Adobe software from the system and starting again. The original issue remains.
Finally, it's worth mentioning that PS CS5 has worked without any problems on this system for just under a year now. I haven't made any drastic changes to the system so I'm completely baffled as to why this is happening.
Hope this post goes some way to the issue being acknowledged and rectified.
-Windows 7 64 bit
-NVIDIA GeForce GTX 550 Ti
-16 GB RAM
-100 GB + Remaining Disk Space -
Additional document directories
Does anyone know how to set up additional document directories in the weblogic.properties
file ? I already have a document root when I set up the weblogic.httpd.documentRoot
directory
Now I need to create a relative link , for example
documentRoot = /some/directory/name
if someone hits http://server.name:7001/abcd , it automatically sends them to
/some/directory/name/abcd/public_html ??
Is this possible ??
Thanx
KalHi.
I don't think there is a way to do this. I presume you are talking about WLS 5.1 or
earlier. Each instance of the server has only 1 instance of a document root.. All resources
served must be in that root or in a subdirectory underneath it.
Requesting http://server.name:7001/abcd will request a resource in the abcd directory under
your document root.
Michael
Kalyan wrote:
Does anyone know how to set up additional document directories in the weblogic.properties
file ? I already have a document root when I set up the weblogic.httpd.documentRoot
directory
Now I need to create a relative link , for example
documentRoot = /some/directory/name
if someone hits http://server.name:7001/abcd , it automatically sends them to
/some/directory/name/abcd/public_html ??
Is this possible ??
Thanx
Kal--
Developer Relations Engineer
BEA Support -
How to create a document/report on all objects in the BW system?
Hi,
The requirement in our company is to create a document/report with the list of all the objects that exist in the BW system for various applications. This list should contain the technical details of the different objects and where an object is used, what's the source for the object etc. The information should be similar to that in the Metadata repository but it should be one single document/report which includes all the objects.
I tried using the 0TCTBWOBJCT info object (content browser) but it was not of great help.
Can anyone help me out in this task?
Thanks,
AnuHi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar
Maybe you are looking for
-
Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.
-
Validator on the generated form on the server WL
Hello, i'm using Jdev 10g. i have the form <af:iterator value="#{informClient_bean.fields}" var="row" rows="40"> <af:switcher id="sw1" facetName="#{row.type}" default
-
Running a Dell xpAfter an update of AIR, programs using it will not run, nor can it be reinstalled. When I look under programs in Control Panel, neither AIR nor Flash appear. How can this be fixed?
-
Error:" Failed to save package list! "while creating package
Hello I m working in BPC 7.5 NW version.Here I am trying to create a package for the process chain /CPMB/IMPORT_IOBJ_MASTER and /CPMB/IMPORT_IOBJ_HIER,however when I am trying to save them to the package list, an error is popping up saying"Failed to
-
Solution Manager 4.0 Support Stack 9
Support Stack / Support Pack 9 of Solution Manager has been called an Enhancement Pack or Feature Pack by SAP. This means it includes new functionality. Two new features that I have been able to identify are the Maintenance Optimizer and the "Synch