Fl8 OSX - how to deactivate?

Hi there,
I want to move my Fl8 installation to a different Mac, but
I'm not sure
how to deactivate it on the current machine. I checked the
menus,
searched the Adobe KB, but to no avail.
Any pointers would be very much appreciated.
Cheers Martin

Hey fredb83300641,
If you could not see Deactivate option under Help menu, then Acrobat has been already deactivated and the Activate option must be clickable at that time.
If there is no Activate option as well under the Help menu, then Acrobat might not have activated properly on your machine.
So, you can simply uninstall & reinstall the software and then again activate it using the same serial key.
You can also refer the below mentioned link for Activation/Deactivation help for Acrobat :
Activation & Deactivation Help
Please try the same way and let me know.
Regards,
Anubha

Similar Messages

  • How to deactivate other phones from using my itunes account

    Please help how to deactivate other phones from using my itunes account?

    Hello Kirstyspencer
    I would sign out of your Apple ID on those devices and also change the password to your Apple ID. That should stop people from accessing and using your Apple ID.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    Regards,
    -Norm G.

  • How to deactivate the marketting attributes for BP in CRM

    Hi,
    how to deactivate the marketting attributes for BP in CRM
    I can add and maintain the same using tcode crmd_prof_char
    But how do I deactivate.
    Points will be rewarded
    Thanks

    .

  • How to deactivate a license from a dead hard drive

    how to deactivate a license from a dead hard drive

    You can't. However, Support or chat may be able to help you reset the activations.

  • I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    I want to install my original SnowLeopard (from the installation disc) to a partition I created in the now upgraded Mavericks OSX, How can I install it on the new partition?

    That's easy.
    2 methods:
    1. Change the Startup Disk in System Preferences, then restart:
    2. Hold down the "Option" key while starting or restarting the Mac. Then chosse the partition that you want to startup from.
    The 1st mehtod is the quickest, because you don't have the additional step of choosing the drive. Plus, whatever you have selected in System Preferences becomes the default startup drive.

  • How to deactivate adobe photoshop cc on one machine so that to be able to use it on another machine?

    how to deactivate adobe photoshop cc on one machine so that to be able to use it on another machine?

    Use Photoshop CC menu Help>Sign Out.... to deactivate the activated install.

  • How to deactivate withholding tax base amount field

    Dear Experts,
    My in client is using the extended withholding tax with setting Define Formulas for calculating withholding tax, my client feel that the tax base amount field is open and user may accidentally input the wrong amount there thus can anyone tell me how to deactivate this tax base amount field?
    thank you

    Dear,
    Go into Withholding tax type under SPRO>Financial Accounting Global Settings>Withholding Tax>Extended Withholding Tax>Calculation>Withholding Tax Type.
    While maintaining the Withholding Tax type you have selected "W/tax base manual" under the control data. Just don't select that option then your requirement will be met.
    There are other options also like Manual W/tax amt. which you might want to go for.
    Regards,
    Chintan Joshi.

  • CO down payment update is active in controlling area , How to Deactivate?

    Q1) CO down payment update is active in controlling area , How to Deactivate the same?
    I am trying to post,vendor Downpayment in F-48, it is aking for Maintain default cost element in controlling area .
    Is that required?

    Hi,
    Generally, SAP makes that the down payments are always updated in CO. To maintain the default cost elements, you could use OKEP transaction. However, it's possible to deactivate this function by implementing note 388843.
    Regards,
    Eli

  • How to deactivate Adobe Acrobat 9 Standard on notebook(old), to get the license free for an installation on notebook(new)?

    How to deactivate Adobe Acrobat 9 Standard on notebook(old), to get the license free for an installation on notebook(new)?

    Yes, I do need deactivation, because the other one runs on my desktop pc. 
    And no, there is no deactivation option in the help menu in my version (acrobat 9 standard).

  • How to deactivate adobe acrobat Pro version 10?

    I need to reformat my hard drive and I need to deactivate Adobe Acrobat Pro version 10.  I go to the help options and "Deactivation" is not even an option.
    Any idea of how to deactivate the software if there isn't even an option?
    Thanks for your help
    Dave

    Hi Dave,
    You are not getting the deactivate option as it might be possible that Acrobat was installed with volume license serial key.
    If the deactivate option is not available then please go ahead and uninstall the program.
    After reformatting the drive, re install the software.
    Regards,
    Anand

  • How to Deactivate 'Save  Parked Document' in MIR7

    Hi..Friends,
    In Transaction Code MIR7, how to Deactivate Main Menu -> Invoice Document ->'Save  Parked Document' .
    Thanks in Advance,
    N.G. Mahender.

    Hi Friends,
    I got my answer in in Mr.  Pablo Casamayor  referenced posts,
    thank U very much Mr.  Pablo Casamayor .
    Reference Links
    Deactivate 'SAVE" pushbotton in transaction MIRO
    Error message in case of One time vendor in MIR7 and MIR4.
    Tcode MIRO with BADI: MRM_HEADER_CHECK
    Regards,
    N.G. Mahender.

  • How to deactivate ERS output??

    Hi All,
    When I run the MRRL transaction I get the error as
    "ERS settlement: No message was found for partner XYZ/company code ABC"
    When I maintain the condition recor in MRM, the error disappears and the invoice gets posted.But at the same time it gets printed.
    I do NOT want to print the invoices. How to deactivate the ERS output so that I do not need to maintain any condition records in MRM1 and the system should also not give any error message like the above.
    Regards,
    V S

    Please refer to the column Information Text, which is stated that " ...
    No message was found for....". Please double click on this for further
    information about this and the error message should be M8 446:
    You can change the attribute of the message thru path in customizing :
    Materials Management, Logistic Invoice Verification => Define
    attributes of Systems Messages'. Here you can use the pull down menu
    and set the message to "switch off message" this can be set up for
    individual users or for all users.
    In this step, you can define the category of message received by
    individual users for certain messages in Invoice Verification. This
    allows you determine whether a user receives a message as an indication
    of:
    - Information
    - Warning
    - Error
    - Or whether no message should be issued at all: message switched off
    Hope the information help !!! 

  • How to Deactivate Subtypes for INFOTYPE 0105.0021

    Hi Seniors,
    Can anybody tell me how to deactivate the assignment of subtypes assigned to infotypes.
    I have 7 subtypes of Infotype 0105 and 5 for 0021 out of which 3 are not required by clients both in 0105 & 0021,now i have to remove the assignment made to the Infotypes but i am wondering about the customiizing steps and Tables to be maintained please help.
    Waiting for some valuable responce.

    Hi Woody,
    Thank you very much for the update,it really worked but would like to ask you 1 more guideline to delaet the subtypes of 0041-date specifications.
    There are certain specifications which are not available in 0041 but still poping up automatically ,
    i have checked the settings in T548Y but no help it doesnt have the options but in maintaing 0041 the options coming up .
    Can you guide me on this.
    Thanks in advance.

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • Can any one tell me how to deactivate vendors in sap whom we have not done business for last 18 Month

    Can any one tell me how to deactivate vendors in sap whom we have not done business for last 18 Month>

    Hi Jahanzaib,
    You can go to transaction FK05 and block the vendor if you want to deactivate the vendors.
    Thanks,
    Ameet

Maybe you are looking for

  • Convert a String to Decimal Format in European format

    Hi Experts, I am having a string as a context type for a input field, where the user can enter the Price, I need to convert the same into European format "###.###,00", I am using this below code to convert the string to decimal format User will enter

  • How do I get Finder windows to display free space on hard drive?

    In Snow Leopard if you opened a Finder window, at the bottom it would show how much free space your hard drive had left.  Lion by default does not do this.  Is there a way where I can turn that option on so i can view space availible when opening Fin

  • Mac plus operating system?

    Hello everyone, I just pulled my old mac plus out from my garage, and was wondering where i could get a operating system floppy disk so i could use it, because when i turn it on it either: Has a black screen and beeps continuously. Or just has a blan

  • Oracle Timesten Geo-redundent architecure deployment queries

    Hi, We have 6 sites and each site connect with lease line. There are 5 different physical Remote Site we want to deployed the active/standby timesten database on 5 sites We want to create the READ ONLY LOCAL CACHE GROUP for each 5 Sites which is auto

  • How to remove update icons from Launchpad?

    I have updated Skype now I have noticed a second icon for the update in the Launchpad screen. Is there a way to remove the one for the update? Larry V