(fla8) Panoramica de 180º

Hola amigos, tengo que hacer en flash una aplicacion de una
foto panoramica
de 180º alguien tiene algfun fla o me puede guiar donde
sacar algo para
hacer esto? pero tiene que ser de 180º no de
360...muchas gracias!! a todos!
siempre me ayudan en todo! un abrazo

Adrian, claro necesito que vaya de izquierda a derecha con
control del mouse
o sea cuando moves el mouse de izquierda a derecha se mueva.
en esa
direccion.
muchas gracias.
"Adrián Gómez" <[email protected]>
escribió en el mensaje
news:efjh9f$5pc$[email protected]..
> Hola Luciano,
> necesitas hacer la imagen con muchas fotos o que es lo
que necesitas?
> Si es mostrarla, de que manera querés mostrarla?
con controles? que vaya
> de izquierda a derecha sola o como?
> Saludos
>
> Adrián
>
> "PIXEL" <[email protected]> escribió en
el mensaje
> news:efje2i$20r$[email protected]..
>> Hola amigos, tengo que hacer en flash una aplicacion
de una foto
>> panoramica de 180º alguien tiene algfun fla o
me puede guiar donde sacar
>> algo para hacer esto? pero tiene que ser de
180º no de 360...muchas
>> gracias!! a todos! siempre me ayudan en todo! un
abrazo
>>
>>
>
>

Similar Messages

[Solved]Xorg 1.6 with nvidia 180.44 2D performance painfully slow

Hi folks,
Since the latest upgrade of Xorg and Nvidia all screen refreshes have become visibly very slow. Anything that has to redraw the whole screen takes a full second and my cpu usage jumps to 15%. The wierd thing is that glxgears is getting 200fps and looks perfectly smooth. Direct rendering is enabled and the client and server versions of the driver match. There are no errors in the Xorg.0.log apart from warnings about ACPI
I am using an Nvidia 6200 in TwinView mode with 2 identical monitors.
Here's my files/logs:
xorg.conf:
# nvidia-settings: version 1.0 (buildmeister@builder63) Tue Nov 4 14:08:09 PST 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
# Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "1"
Option "AutoAddDevices" "false"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "TEU TL970"
HorizSync 30.0 - 81.0
VertRefresh 40.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TEU TL970"
HorizSync 30.0 - 81.0
VertRefresh 40.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "NoDRI"
EndSection
Section "Screen"
# Removed Option "TwinView" "0"
# Removed Option "TwinViewXineramaInfoOrder" "CRT-0"
# Removed Option "metamodes" "CRT-0: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-1"
Option "metamodes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
Option "NoLogo" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
Xorg.0.log
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux vostok 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 10 April 2009 07:03:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 14 11:11:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0@3:0:0) Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) rev 2, Mem @ 0xe0000000/16777216, 0xe3800000/16384, 0xe3000000/8388608, BIOS @ 0x????????/65536
(--) PCI:*(0@10:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe1000000/16777216, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NVIDIA dlloader X Driver 180.44 Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 0a@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1280+0, CRT-1: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:10:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.10.52
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:10:0:0:
(--) NVIDIA(0): TEU TL970 (CRT-0)
(--) NVIDIA(0): TEU TL970 (CRT-1)
(--) NVIDIA(0): TEU TL970 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TEU TL970 (CRT-1): 400.0 MHz maximum pixel clock
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Display Devices found referenced in MetaMode: CRT-0, CRT-1
(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):
(II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
(--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode
(II) NVIDIA(0): "CRT-0:nvidia-auto-select+1280+0,CRT-1:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "NoDRI" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Thanks for your kind attention.
Last edited by sekenre (2009-04-14 16:48:38)

Dheart wrote:glxinfo | grep direct ?
Also try to run some game to see whether it will work.
Already done:
direct rendering: Yes
And I'm at work, no games sorry
I lowered the colour depth to 16bpp and it's a little bit faster on window refreshes. It's good enough to be usable but it's still annoying.

Mega 180 Temps

Let me start off by saying that the Mega 180 is a great idea for a product but unfortunately it is not finished. MSI is using us as beta testers - at our expense. I build computers for people as a side business and against my better judgement, I built a customer a Mega 180 based system and I've had nothing but problems with it and it's damaging my reputation. But, OK enough of that.
One major problem with the Mega 180 is it's CPU and hard drive temp and here's what you can do to fix it. First off, the CPU heat sink is nice and big and made of copper - very nice. However, the underside of the sink (the part that touches the CPU) is absolutely aweful! The bottom should be mirror smooth. Mine looks like the surface of a record. Therefore, you need to lap it. Look this process up on the net to see exactly how to do it. Once lapped and the bottom is mirror smooth and you can see your reflection, use ARTIC SILVER thermal grease (just a tiny bit) and put the sink back on. Your CPU temp under load will be about 8 degrees cooler. Next, replace the small fan on the cooler with a bigger one (make sure you use one that's sensored, like the one you're replacing). Lastly, get some flexible ducting from the hardware store (plastic, not aluminum), attach one end over the sink's big fan and carefuly route the other end to the side of the case (may not be possible if you are using an AGP card) and position it so it sucks in outside air. Now that your CPU is cooled with fresh air, you will see another 2 - 3 degree reduction of CPU temp.
Finally, the hard drive is way too hot. I measured it with a IR temp meter after a full defrag and my jaw hit the ground when I saw how hot it was - 152 degrees F. That type of temp will kill your hard drive. Fix this by placing a fan inside the case (RAM side) blowing fresh air right onto the hard drive. This brought the temp down significantly. It also cooled other items too (CD drive, chipset).
The only downside to this is your system will be louder due to fan noise. However you will have fewer system lock-ups and mystery reboots (caused by overheated components).
One last idea, if the case is just too cramped for you, remove the power supply, buy a new one and mount it outside the case on the back. It doesn't look good but it sure frees up space and improves air flow (plus you'll have more power if you buy a higher watt supply).
Peace!

Hey cb31,
Even though this thread is about temps, I too think noise is the biggest problem with the Mega, and my current efforts are targeted at killing the constant background noise. My goal is the same as your's - I want to leave the computer on most of the time and not be bothered with it.
I'm proceeding slowly however, and so far I've only done the following:
-Replaced the 60mm Delta fan with a Papst of the exact same size. I found the Delta to be noisy, while others report that it's doing ok. Don't know about you... The Papst is really quiet and actually cools a little bit more effective, though that's a bonus feature! But on the overall it didn't have the effect I hoped for
-The smaller Delta fan (outtake side of heatsink) already is quiet enough, so doesn't need to be replaced on behalf of noise anyway...
-Took out the PSU and put White Lithium Grease in the fan for smoother operation since I figured it made a lot of noise. That didn't help much either... I'm thinking about replacing the PSU fan with something better, even though a lable on the back of the PSU states "W/ Noisekiller". It's still a no-name fan and can be improved upon.
Right now the loudest noise in my Mega doesn't seem to come from any fan at all, but rather from the hd. And it's not so much the actual noise from the unit as vibrations reverberating through the chassis. A common problem obviously, but there isn't any room for hd suspension systems in the Mega, so other actions are required here! I tried to slide in thin sheets of plastic between the drive and the cage, to act as silencers, but that didn't have any real effect as the cage touches the drive in several places, thus transfering the vibrations anyway. A new drive cage could do the trick, but I haven't gotten that far yet, and might not ever...
The Seagate Barracuda is considered to be a silent drive, so replacing it probably wouldn't help.
To conclude: If your fans are noisy, replace them or grease them for better operation, but you might not even hear the difference...
The major flaw seems to be the internal design of the Mega, and there's isn't much to be done about that, unless you're handy with a Dremel and sheets of metal. I might be, but I will have to get back to you on that!
Cheers!
-M

Keyboard not disabling past 180 Degrees (Yoga 13)

The keyboard on my Yoga 13 is (apparently ouf of the blue) not disabling when I open the Yoga passed 180 degrees. It doesn't shut off until the Yoga is nearly fully folded back on itself (tablet mode). This is a big problem for me as I love using the Yoga in stand mode on my lap when sitting in my recliner.
Any way to adjust this?

hi slydog75,
Thanks for Posting,
I personally would suggest
Going into Device Manager and uninstall the Drivers under Sensors
Then Restart the computer the reopen device manager see If the sensors are back then try the Keyboard again
There is a similar discussion about this issue as well Please Check as some Suggest was able to fix this issue.
http://forums.lenovo.com/t5/IdeaPad-IdeaTab-Slate-Tablets/Yoga-13-keyboard-not-turning-off-until-alm...
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Quota deduction when EE has been inactive for more than 180 days / Advance quota days when employee does not have enough balance

Dear experts,
We have two requirements regarding to the "Anual leave" quota.
1. Quota reduction when employee is inactive for more than 180 days
2. Advance quota days when employeee does not have enough balance
We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
First, we need to clear the balance that was calculated above in the schema.
Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
Thanks in advance!
Kind regards,
Alex

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

Cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items"

I cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items". Macbook Pro, 10.6.8

Maybe the items are locked.
Mac OS X 10.6 Help: Shortcuts for working with items in the Finder
Shortcuts for working with items in the Finder Command (⌘)-Shift-DeleteEmpty the Trash without any warning or when it contains locked filesCommand (⌘)-Shift-Option-Delete
http://docs.info.apple.com/article.html?path=Mac/10.6/en/cdb_cpmvfky.html

TV-Out on Mega 180 (Composite)

Hi there,
I just received my Mega 180 some days ago. So far I'm really satisfied. I just have one problem an perhaps you could help me.
I at first used the S-Video out from Mega to my S-Video-Scart-In of my TV. That worked without problems.
Now I wanted to use the Composite out instead of S-Video out from the Mega 180. So I connected a composite-adapter to the S-Video port and connected a composite cable to it. Now my TV only shows the picture black/white.
I know that this is an issue connected with S-Video. So I changed in nvidia-driver the automatic detection to manual (composite). But whenever I change this, I just get a complete black screen. I tried this with many nvidia driver versions. All the same.
And now the really misteryous thing: when I de-install the nvidia driver (graphic) and start windows with standard vga-mode, I have a colored picture with the mentioned composite out without having changed anything.
Anyone has an idea? Thanks in advance.
My Hardware:
- MSI Mega 180
- Athlon Sempron 2800
- WinTV 350 PVR
- 512 MB
- onBoard graphicscard

Quote
I at first used the S-Video out from Mega to my S-Video-Scart-In of my TV. That worked without problems.
Quote
I want to use composite instead of s-video because my tv doesn't support s-video. It only supports composite.
just re-reading this post has got me a little confused. are you now connecting to a different TV now?

QuickTime Pro - I am trying to find a way to retrieve my Quick Time Pro code and re-register it but, because I bought it more than 180 days ago, I cannot find the code anywhere, or any way to get an answer from Apple's website.

I have been going round in circles, trying to resolve this
I bought the MPEG2 component from the Apple UK store on 4th July 2010. I still have the email and the order number but they are no use to me because it is more than 180 days since I ordered this from them.
My operating system got corrupted and I had to do a clean install, then a return of the relevant files, folders and applications from my Time Machine. With that should have been my MPEG2 component for QuickTime Pro but it refuses to register.
I need it to convert my videos taken on my older video camera, which is a Sony, using mpeg2. I cannot look at any of these videos any more, which is deeply irritating. Still lots of editing to do.
I think it is a bit off if I have to buy it all over again
Any ideas?
Mac OS X 10.6.8
Quick Time and Quick Time 7

I still have the email and the order number but they are no use to me because it is more than 180 days since I ordered this from them.
The registration cade is contained in the email Apple sent you on purchasing.

MEGA 180: A story of stupidity mixed up with bad product design

This is more for a word of caution to Mega180 users and future owners.
A bit angry as I managed to burn ( physically ) 2 harddrives because of carefulness about 10 mins.
Spend quite some time looking for a SATA to ATI power converter while looking for a solution to CPU temp problem. Could not find one ( and I don't know if any one does it )
As my old HD did not start the OS on Mega180 for some data transfer I was not able to use my USB external HD. So I decided to connect old HD as slave and do a HD to HD transfer. Here comes the bad design, the HD connection cable specifies a slot for a slave HD however there is only one power connector (ATI) for supported IDE HD. and there is a useless SATA power connector,it is useless as MEGA 180 does not support SATA.
Here comes the stupidity, for a min I came up with the bright idea of using the CD drives power connector ( I now remember that I ruled this option earlier, I wish I remembered it all along) As there is always a current on this cable (when there is a power connection - for the HIFI mode to work ) I guess some static electricity effected my HD. Not having realised the HD is already affected, I swapped the cables as the HD connection cable is not long enough to keep 2 HDs in a steady state.
As a result both my HDs are now not working, when I tried the original master HD I was horrified to see a spark and some fume
I wish I never tried to use my old graphics card - which I wanted only for the DVI support. This led to CPU temperatures of average 70 degree celcius and when I ever I tried to use the PC properly I was had to turn it off due to extreme temperatures over 75 degree celcius.
All I was after is a troublefree smooth working nice looking PC, yet I am stuck now... I am both upset for the data I lost as well as hours I spend in trying to put this thing together. I will decide in the morning to return or keep the product. If I keep it the next challenge will be getting my external HD to run an OS as I need to save up again to buy a new HD, I was hoping my next HD would be a SATA one :(
This is definately a bitter lesson. Such a pity that with just a little more effort MSI could have really improved the profuct most are listed here but I want to summarise:
1. before getting the new product out try fitting a new graphics card and a TV card and operate both for 2 hours... That is if you could fit them both in the first reason why you could not is the cables from power supply is unnecessarily long for supplying power to the board and unsuitably located. the best you could do is place them all infront of the cpu fan.
2. It is really great to have detachable ODD and HD yet Floppy drive ( card reader ) bay is static
3. a better location for CPU or card slots would have contributed to airflow far more.
Better close here... I am still not sure if positives of the product companates all the negatives.

Simply, be aware that the power cable for the CDRom is live most all the time that your backpanel power cord is plugged in. Its for the support of CD/MP3 in HI-Fi mode. If you shut down your system, and not unplug the power, and you try to connect or disconnect anything to the IDE cable, and you are using the power cable for the CD, you can cause static/surging on the component you are hooking up....
If you must hookup an alternate drive [slave] for data dumping/imaging etc. use a Y cable from the HDD power cable. It only activates when the PC power switch is utilized....

Is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

The app developer chooses the alert sound, or provides a way for you to change it.

I need help highlighting an expiration date on my Numbers '09 spreadsheet. I want the text/fill of a cell to change color when the expiration date of an item is within 180 days of the current date.

I need help highlighting cells on my Numbers '09 spreadsheet. I want the cell text/fill to change color when the date is 180 days or less from the current date. I already have a cell with the current date in it. I also know how to change the fill/text colors. All the cells have been formatted to show date only. I am having trouble with the formula. I can get to the Conditional Formatting menu and select "With Dates" but after that I am lost. Can anyone help?
Thank you for any assistance.
B

Set a Conditional Format rule as shown in the illustration below. The rule has been applied to all dates in column B of the table.
Regards,
Barry

I bought an album on itunes which costs 120 rupees,but my account was charged 180 rupees.i would like to know why the extra 60 rupees was charged

the question is i bought an album worth 120 but was charged 180 why

This is a user to user forum, you will need to contact itunes app store support, use the link in the bottom right of this page "Contact Us".

Logic error in rotating a bot towards a target (switch from -180 to 180 and vice versa causes error)

Hi,
I am making a Bot class. This function rotateTo makes the bot rotate towards some coordinates, xTarget and yTarget.
There are two targetRadians lines because it is easier to read for me.
The target radians shows the angle of the target from the bot where the bot angle is this.angleRot.
if the bot-angle minus the target-angle (it says in radians but is actually in degrees) is less than 0 it turns right and if it is greater than or equal to 0 then it turns left.
public function rotateTo(xTarget, yTarget):Void {
                    targetRadians = Math.atan2(yTarget-this.yPos, xTarget-this.xPos);
                    targetRadians = Math.round(radiansToDegrees(targetRadians));
                    trace(targetRadians);
                              if (this.angleRot-targetRadians<0) {
                                        turnBot(5);
                              } else {
                                        turnBot(-5);
This basically works. The bot rotates towards the target at 5 degrees per frame.
The angle setup is that if the target x, y is below the bot x, y, the target angle is about 90, if it's to the right its about 0, if its above it's about -90 but as the angle is decreased to -180 from above to the left of the bot, when it goes below the bot (and to the left) the target angle switches to 180.
So something like: with the bot in the middle and the target being located at one of the numbers;
          -90
-180               -1
180               1
           90
The fact the target angle switches from -180 to 180 or 180 to -180 confuses the bot and the bot decides to turn ALL the way the opposite direction BECAUSE;
if the bot angle is 160 and target angle is 175, the bot angle increases because target is greater than bot angle. If the target angle changes to -180, bot angle decreases even though it's more efficient to change from 160 to -180 through increasing the bot angle as at 180 it changes to -180. I just cannot work out the logic to use to make this work though.
Any suggestions? Thanks.

Hey I got it to work finally:
public function rotateTo(xTarget, yTarget):Void {
                    targetRotation = Math.atan2((yTarget-this.yPos), xTarget-this.xPos)*180/Math.PI;
                  if (this.angleRot-targetRotation>180) {
                              this.angleRot -= 360;
                    } else if (this.angleRot-targetRotation<-180) {
                              this.angleRot += 360;
                    if (this.angleRot-targetRotation<0) {
                              turnBot(5);
                    } else {
                              turnBot(-5);
so basically I added a couple of if statements before the main business.... I don't really have a coherent explanation for the fix but it works!

Transaction type 180 not possible (no affiliated company specified)

Hi,
I am trying to do the down payment Request in F-47 with Purchase order and asset. When I am trying to do this by giving the Asset number and Purchase order with Item 10. I am getting this error Transaction type 180 not possible (no affiliated company specified). The vendor is also not linked to trading partner and not an affilated company specific.
Please help me solving this issue.
Regards,
Raj

Hi Raj,
If in OBY6, no company ID is defined for company codes, they are NOT affiliated companies and the opposite.
Please check also via OBA7 (document type), if the field "Enter trading partner" is flagged
If yes -> you need to use a transaction type (AO74) which post to affiliatedcompany
If no -> you need to use a transaction type which does NOT post to affiliated
Best regards Bernhard

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

(fla8) Panoramica de 180º

Similar Messages

Maybe you are looking for