Flag for First Article Inspection report
Hi
My client wants a report to flag the part number for First Article Inspection which was lapsed in production for 2 years.
Historic data is coming from SAP Complex assembly manufacturing solution ( CAMS) and can be extracted using BODS and data is coming from SAP ECC too.
The requirement is to pull the Part number, Part description, Revision and Date manufactured from CAMS and ECC to BW on Hana database and flag the part number which was lapsed 2 years for production.
Please advise me how I should go ahead for this requirement .
Thanks
Ranjith
Hi GS,
What do you mean by first article inspection during manufacturing ?
You create first production order for a material (SFG/FG) and completes the production order make the GR..stock goes in to quality with inspection lot generation..Now till the time this first inspection lot is cleared system should not allow create/release the second production order for the same material..
is this the requirement ????..
if yes... then it is not possible in standard SAP...you need to go for some enhancement...
if no...elaborate your requirement in detail...
Thanks
Kumar
Similar Messages
-
Quality managment - First Article Inspection
In SAP is there any standard functionality for First Article Inspection. It is
better to have all the transaction and inspection reports in
SAP. It is easy to maintenance, easy to access and able to
monitor/evaluate the supplier with rejection and acceptance
rate.Hi Kaushik,
First Article Inspection is similar to first part appoval that is inspection of new part which is first time received from supplier. Can we record the result of this inspection ? Is there any standard functinality. I understand we maintain Q info record. But then we can not enter inspection results for first part and not even track rejections and approvals.
Please revert back for any other information.
Thank you for your time. -
Hi,
Has anyone successfully implemented first artlicle inspection during manufacturing ?
Also during purchase order receipt we can have first article inspection via the Q info record. This workss fine to have the 0101 inspection type for teh first article. However if the first article inspection lot is not dispositioned, the system does not allow me to receive subsequent lots.It says "No inspection lot can be opened for vendor and material". Is it possible to allow the system to allow subsequent receipts to take place though the first article is open ?
ThanksHi GS,
What do you mean by first article inspection during manufacturing ?
You create first production order for a material (SFG/FG) and completes the production order make the GR..stock goes in to quality with inspection lot generation..Now till the time this first inspection lot is cleared system should not allow create/release the second production order for the same material..
is this the requirement ????..
if yes... then it is not possible in standard SAP...you need to go for some enhancement...
if no...elaborate your requirement in detail...
Thanks
Kumar -
First Article Inspection(FAI)
Hi all,
I've been hearing about FAI.Does anyone know what is First Article Inspection?Which Industries use FAI?Is it something like a Source Inspection?
regards,
NaikFirst article inspection as I understand it means that you set up an agreement with a vendor to produce a specific part. You have such trust in the vendors ability to perform that you only inspect the first shipment of the material. If the material meets all requirements of the contract, you are assuming that all future shipments will be similar and you do no more inspections.
I think the standard SAP process for this would be Dynamic modification where you up the rule to inspect once and then have like 9999 skip lots. Some places set it up with a time limit, like 365 days. So that you inspect at least one shipment a year.
Craig -
First article -Inspection lot issues
We maintained 0101 inspection type and 04 inspection type in the material master. we maintained the Quality info-record with the profile and we maintained usage as 5 ( Good receipt ) in the inspection plan ..Inspection lot is creating for the production process , but not for the first article and it is directly receiving in to unrestricted type . Any input will be highly appreciated
Thanks,
NicInspection lot is creating for the production process
Because you set up the inspection type '04' in the material master, an inspection lot is created when you make GR for production order.
but not for the first article
SAP does not support any inspection type for the first article of production order.
The inspection type '0101' is relevant to purchasing process only, not production.
it is directly receiving in to unrestricted type
Check the inspection set up in material master and select check box of 'Post to inspection stock' for inspection type '04'.
Regards
Luke -
Sap qm first article process?
We are trying to implement the first article process, does anybody know the process in sap to flag(identify first article) for the parts newly received into sap? Is there any t-code or existing process in sap?
thanks,
MaggieHello Nehal,
Thanks very much for your kind response, I feel very lucky to know someone has implemented similar First Article process before.
I have some questions to clarify:
1). How to deal with scenario of receiving material from different suppliers? Our first article inspection should be the combination of material and supplier(e.g. supplier A's first article got accepted does not mean for the same part we do not do FA from vendor 2, vendor 2 still requires first article)
2). I treid the exact steps you suggested, but could not get vendor populated in inspection lot, we do not need to do the level of characteristics for inspection, simply a sampling procedure will work for us, but I am missing the vendor info, this will defeat the whole purpose. Can you please explain more in detail how can we link vendor info for material to show in inspection lot, inspection plan is at material master level(mm02), but we want supplier/vendor combination.
3). We also need to meet the requirement for buyer/quality people to manually update/change the FAIR, any suggestion on this?
<<Personal information removed>>
Thanks a lot!!
Maggie
Edited by: Matt on Apr 23, 2009 7:50 AM - please do not put personal information such as email addresses on these forums. You can maintain an email address through which people can contact you, on your business card. -
Hi,
I would like to understand how to handle this senario first artical inspeciton.
As I understood ,Need to create new inspection type and new status profile and info record with ref to mat/plant.
but Iam not clear. if some one of you can explain me in detail how and what is right process to handle would be great help
regards
KrishI would like to understand how to handle this scenario first article inspection.
As I understood ,Need to create new inspection type and new status profile and info record with ref to mat/plant.
but I am not clear. if some one of you can explain me in detail how and what is right process to handle would be great help
There are various way like QM info record ,establish the QM suppy relationship though status( 0101 inspection type)
go through following may add some value.
sap qm first article process?
Quality managment - First Article Inspection
First article inspection
First Article Inspection(FAI)
Edited by: SujitSND on Apr 20, 2010 3:43 PM -
Setting the 'reportable' flag for a very large ODS
Hello Community,
I am working on a very large BW system (6 Tb), and we recently have the need to set the 'BEx Reporting' flag on some very large ODS objects.
It was my impression that setting this flag would be easy to do. But the transport that contains this flag for six large ODS objects has already been running for more than 16 hours.
Can you tell me, what actually happens in the database when the 'BEx Reporting' flag is turned on for an ODS ?
Thanks !
KeithHello Bhanu,
Thanks for the quick response. Are you able to provide some more information ?
are the SID values created in a new SID table ?
if the ODS was already very large, then would you expect the new SID table to also be very large ?
what about the case if a SID value already exists for the characteristic ?
Thank you !
Keith -
Print Bar code for inspection report
Dear all,
I have a requirement for printing bar code in the inspection report. Normally, we use QGA3 print inspection report which based on the script form. Now as I would like to add bar code, as I know, I have to use smart form to realize. but it can just enter Form in the standard way. So could anyone give me some useful suggestion to realize this requirement?
Thanks a lot.
Best regards,
Benny.Hi,
Identify corresponding form.In the character format we have to define the bar code and assign that one infornt of which we need the bar code.
eg:
SE71 screen if you go the character
there below you will get the bar code
specify one character for that bar code and
in place of which u want to print place it.
for eg u have character specified as bb,
and in place of Inspection lot (w_lot) you want to have bar code
the just type.
<bb>w_lot</>, this will print the bar code for instead of inspection lot
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 22, 2008 7:26 AM -
How to remove flag for deletion for an article in SAP IS Retail
Hi,
I wish to know , is it possible to remove flag for deletion at client level for the article (in SAP Retail System) ?
I have already tried to do remove the flag using the tcode MM06 (MM) method.
But the system says that, it cannot be done for the articles maintained using the retail functions.
I there any other Tcode ?
Or it's the end of the road ??
If possible please reply asap.
Regards,
Anirban Royawaiting response.
-
What is the condition for First write statement in reports?
What is the condition for First write statement in reports?
In
TOP-OF-PAGE & START-OF-SELECTION.
U have to write what ever u want to dispaly.
Top-of-page will trigger first and write the statements.
SAmple report program for reference.
REPORT ztemplate
NO STANDARD PAGE HEADING
LINE-SIZE 130
LINE-COUNT 65
MESSAGE-ID zm.
* The Data Declarations
TABLES: mara." General Material Data.
* Type Declarations:
TYPES : BEGIN OF ty_mara,
cb(1),
matnr LIKE mara-matnr,
mtart LIKE mara-mtart,
matkl LIKE mara-matkl,
END OF ty_mara.
* Internal Tables:
* The following structure type must be defined in the data dictionary
DATA : i_output TYPE ty_mara OCCURS 0 WITH HEADER LINE.
DATA: lines TYPE i, free TYPE i.
* The Selection Screen Definition
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-b01.
*SELECTION-SCREEN skip.
SELECT-OPTIONS: s_matnr FOR mara-matnr. "Material No
*PARAMETERS: P_XXXXX like XXXX-XXXXX. "Description
*PARAMETERS: CB_XXXX as checkbox. "Description
*PARAMETERS: RB_XXXY radiobutton group XXX default 'X'. "Description
*PARAMETERS: RB_XXXZ radiobutton group XXX. "Description
*SELECTION-SCREEN COMMENT fmt name.
SELECTION-SCREEN END OF BLOCK b_main.
*SELECTION-SCREEN ULINE.
*eject
* INITIALIZATION
INITIALIZATION.
* AT SELECTION-SCREEN
AT SELECTION-SCREEN.
*Validate material no details
IF NOT s_matnr[] IS INITIAL.
LOOP AT s_matnr.
IF NOT s_matnr-low IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
FROM mara
WHERE matnr = s_matnr-low.
IF sy-subrc NE 0.
MESSAGE i128.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
IF NOT s_matnr-high IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
FROM mara
WHERE matnr = s_matnr-high.
IF sy-subrc NE 0.
MESSAGE i128.
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
* START-OF-SELECTION
START-OF-SELECTION.
REFRESH: i_output.
CLEAR : i_output.
SELECT matnr
mtart
matkl
INTO TABLE i_output
FROM mara
WHERE mara~matnr IN s_matnr.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-002.
" No records found for selected criteria
leave list-processing.
ENDIF.
IF NOT i_output[] IS INITIAL.
LOOP AT i_output INTO wa_output.
WRITE:/001 wa_output-cb AS checkbox,
003 wa_output-matnr,
015 wa_output-mtart,
024 wa_output-matkl.
CLEAR wa_output.
ENDLOOP.
ENDIF.
* END-OF-SELECTION
END-OF-SELECTION.
lines = sy-linno - 1.
SET PF-STATUS 'ZSTATUS'.
AT USER-COMMAND.
wa_output-cb = space.
SET PF-STATUS 'ZSTATUS' EXCLUDING 'SAVE'.
DO lines TIMES.
READ LINE sy-index FIELD VALUE wa_output-cb.
IF wa_output-cb = 'X'.
MODIFY i_output FROM wa_output INDEX sy-tabix TRANSPORTING cb.
ENDIF.
ENDDO.
CASE sy-ucomm.
WHEN 'SAVE'.
DELETE i_output WHERE cb = 'X'.
WHEN 'BACK'.
LEAVE SCREEN.
ENDCASE.
* TOP-OF-PAGE.
TOP-OF-PAGE.
ULINE.
FORMAT INTENSIFIED OFF.
FORMAT COLOR COL_HEADING.
WRITE:/001 'CB' ,
003 'Material No',
015 'Mat type',
024 'Mat group'.
FORMAT COLOR OFF.
FORMAT INTENSIFIED ON.
ULINE. -
Report of "flagged for deletion" customer
Hi,
is there any way that i can see the list of the customers who have been flagged for deletion?
similarly list of customers who have been blocked for delivery / order etc?Hi,
Go to SE16 u2013 Give table name KNA1 u2013 Enter u2013 then go to settings u2013 list format u2013 Choose fields. Here chose only two fields KUNNR and LOEVM(DELETION FLAG) and execute.
For Billing block and delivery block select FAKSD and LIFSD fields respectively.
You will get the list of customers with deletion as X marked.
OR
Go to Tcode S_ALR_87012179 - under further selection check check mark field only with delete flag.
Hope this helps you.
Regards,
Abhee.
Edited by: Abhee J on Feb 3, 2009 12:34 PM
Edited by: Abhee J on Feb 3, 2009 2:32 PM
Edited by: Abhee J on Feb 3, 2009 2:51 PM -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detectedI was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause. -
Error when launch MaxDB studio for first time
Dear, Experts
I faced with one issue for launch MaxDB studio for first time.
It reported:
Connect user failed
SAP DBTech JDBC: Cannot connect to jdbc:sapdb://.../.UMDB [Restart required].
Creating default user management failed
Could not create database ".UMDB": [C:\sapdb\clients\DatabaseStudio\pgm\dbmcli.exe] > ERR, -24832, ERR_SHMNOTAVAILABLE ...
Could you please help me on this?
Thank you in advance.
Best RegardsIf not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.
Maybe you are looking for
-
Start background Job when another is finished (NOT with the JobSteps)
Hi guys, i need your help. I've already searched here in forum, but i wasn't able to find a good solution. I have this problem. I have a program that create a background job with the FM FM JOB_OPEN.. SUBMIT report with parameters .. JOB_CLOSE. I want
-
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will
-
Printing a commercial envelope on an MB5320 in Word 2013/Windows 8.1 is bugged?
I just purchased one of these printers. I was testing printing envelopes, which was one of the main reasons I purchased the printer. I noticed that when setting the paper size to the Commercial D10 envelope (4.125 x 9.5) preset in the Word (using the
-
Does WLS6.1-sp2 support J2EE-1.3 spec by default?
hi All, Just installed WLS6.1-sp2 30-day evaluation. I tested on it with a simple Filter servlet, but it didn't work at all. I tried to find some docs related to J2EE spec compliance and they say the default is
-
Cannot update to software 1.2
Today I purchased a 2nd generation nano that I plan to use with the Nike + iPod system (I bought the sport kit too). The instructions say that I must have software version 1.2 on my nano in order for the Nike + thing to work. However, I cannot get 1.