Flag multiple recordings for deletion?

I think I see what you're saying. Are you talking about a "multi-select" function to grab multiple shows for deletion?   Anon24542 wrote:
@mycooler - thanks, but I'm not referring to a group (i.e. a folder) of recordings with the same name, but rather a list of recordings.    

I fear this may be another feature I've lost after moving to the X1 platform (i.e. no buffer recording, no reminders, no favorites button, etc.), but ... is there any way after pressing the Xfinity button // Saved // Recordings to display the list of recordings, to FLAG a subset of them and then press OK (or the "D" button) ONCE to delete them all? As it stands, to delete say 10 recordings, I must successively highlight each one, press "D", press OK to confirm ("Delete Now"), then wait 5 agonizing seconds before "Successfully Deleted" finally disappears! (p.s. I already KNOW it's been deleted successfully because it's disappeared from the list, so why the painful confirmation message?) Anyway, thanks in advance for your thoughts.

Similar Messages

  • Find flagged process orders for deletion

    Hi all ,
    How do i find flagged process orders for deletion ?
    i need report or t-code

    Hello,
    Try with t-code COOISPI. In selection,Put material no and system status(sel. at header level) as DLFL
    and also check  "with deeltion flag indicator"
    Check with result and revert.
    Regards,

  • How to flag a material for deletion?

    Hi All,
    Any FM or transaction that I can use to flag a material for deletion?
    Thanks in advance.

    <b>FYI</b>
    BAPI_MATERIAL_DELETE           Flag Material for Deletion                  
    MALU                           Update Program: Set Deletion Flag Mat.      
    MATERIAL_UPDATE_LVORM          Update changed deletion flags in material mas
                                                                                    DPRL                 Change Material When Profile Deleted      
    MBAD                 Delete Material Documents                 
    MM06                 Flag Material for Deletion                
    MM16                 Schedule Material for Deletion            
    MM70                 Sel. Materials Flagged for Deletion       
    MMDE                 Delete All Materials                      
    PPRL                 Change Material When Profile Deleted      
    Tip: You can see the Package =<b>M*</b> to find out all MM related object in SE37,se93 as well as in SE38.
    Hope this’ll give you idea!!
    <b>Pl... award the points.</b>
    Good luck
    Thanks
    Saquib Khan
    "Some are wise and some are otherwise"

  • Flag Material master for deletion at plant level using MM17

    Hello Everybody,
    Here is the issue.
    We are trying to flag materials for deletion using MM17.
    When we try to set deletion flag at client level everything looks good.
    But when we try to set deletion flag at plant level we are getting the following error message.
          Messages have been issued: number MASS172234000587
          Message no. MK101
          Diagnosis
          During inbound processing for the IDoc, messages have arisen while checking material data.
          System Response
          The system has filed these messages in the form of an application log with the number        
    Any thoughts..
    Regards
    Pravin

    If you get such red message in MM17, then you can select it and click the button for detail.
    This will get you into the application log where you can review the detailed error cases.
    Alternative, you can access the log with transaction SLG1, enter as object: MASS and as sub object: BUS1001
    Execute.
    Double click the message text "Messages have been issued: number MASS172234000587
    You get a pop-up from where you can disply the application log (hyperlink Execute at the very end of the text)

  • Safari4Windows: how to hilite multiple files for deletion

    Am asking about Links/URLs  in the 'Bookmarks' section on the left side (the caps title 'Bookmarks' below the Collections section and NOT anything IN the Collections section) . I have several  hundred and can't take the time to delete each one.

    Thanks Carolyn - that works for URLs within a *folder* which in turn is within the lower 'Bookmarks' section, but I mostly have individual URLs in that section (they got there by my dragging URLs off the desktop and they wont drag back again).
    When I highlite one of them, it is of course deletable in the section to the right of the URL, but if I hold down CTRL and click on another URL, it will highlite but the one that was originally hilighted becomes unhighlighted. Nor can I Shift-click a second URL farther down the list and have all the intervening URLs highlite.
    I tried uninstalling Safari for Windows, and reinstalling hoping all the subject URLs would not be there but the new copy of Safari apparantly finds a cache of the old data somewhere (cache.db does not seem to be on the Windows computer anywhere - even with the Develop menu enabled). I have not looked in the registry yet - mite try that. And during these experiments I have disabled syncing with the IPhone 4 (which also has all these unwanted URLs). 
    The saga continues !

  • Mass For Deletion of Info Record

    Dear Experts
    Is there any Code  for Deletion of the Purchasing  Info record By Mass T-code.
    Rgds
    Pankaj Agarwal

    Hi Pankaj,
    find below the steps,
    1. Flag Info-Records for deletion
    2. Run the archiving program - RM06IW30 (Menu path -> Logistics - Materials Management u2013Purchasing - Master Data - Info Record - Follow on Functions - Archive)
    Create Archive File: Info Record:
    a) Select Action: Archive and enter a new Variant, for example: Z_EINA_ARCH_ 01, press 'Maintain'
    b) On selection screen enter the data range (Vendor, Material, etc.) you want to archive.
    c) Deselect the 'Test' flag if you don't want to test first.
    d) Press green back-arrow and enter the description of this new variantt on the screen which follows.
    e) Save the variantt which brings you again to the selection screen. Press green back arrow again.
    f) To start archiving process (batch-job), press the 'Start Date' button and select the time when you want to start this process. Select 'Immediate' for instant processing and press the 'Save' button on the bottom of the Start Time' window.
    g) Select the 'Spool Parameter' button and save entries. Eventually enter a valid printer to have the result outputted.
    h) You are ready now to start the process. Press the 'Start' button and monitor the success with the 'Job Overview' button You can also go the 'fast path' by using transaction SE38, program RM06IW30 to archive info records. For large data archiving, use the background jobs and run those during off-peak times. If you run the program online, you will see a confirmation on the status bar telling 'New Archive file created:.... '
    Delete Archived Records: Info Record
    a) Follow the menu path: Tools - Administration - Administration - Archiving
    b) Select the Object Name MM_EINA for info records
    c) Select the menu button 'Delete'
    d) Select the menu button: 'Archive Selection'
    e) Click the archive created in previous step
    f) Select Start Date for process and Spool Parameters for output
    g) Submit selection.
    h) Check status by pressing the Job Overview button 
    Hope the above answers your query.
    If helpful award points
    Regards,
    Vivek

  • FM to delete multiple items for a plan in IP02 transaction

    In IP02  transaction we cannot delete  multiple items for a maintenance plan.
    Is there any FM which can be used for the same ?
    If not how can we select data for multiple line items using  BDC ,
    i mean how can we identify specific item for a plan in recording.
    Can anyone share your ideas ?

    Hi,
    There is a fm PM_MPLAN_ARCHIVE_OBJECT wrapped in PM_MPLAN_WRITE_ARCHIVE but not so promising.
    As you said there is no deletion facility seen in the transaction.
    May be there should be atleast a possibility to set the deletion flag at the db level.
    I'll get back to you if i come across anything.
    Keshav

  • Report of "flagged for deletion" customer

    Hi,
    is there any way that i can see the list of the customers who have been flagged for deletion?
    similarly list of customers who have been blocked for delivery / order etc?

    Hi,
    Go to SE16 u2013 Give table name KNA1 u2013 Enter u2013 then go to settings u2013 list format u2013 Choose fields. Here chose only two fields KUNNR and LOEVM(DELETION FLAG) and execute.
    For Billing block and delivery block select FAKSD and LIFSD fields respectively.
    You will get the list of customers with deletion as X marked.
    OR
    Go to Tcode S_ALR_87012179  - under further selection check check mark field only with delete flag.
    Hope this helps you.
    Regards,
    Abhee.
    Edited by: Abhee J on Feb 3, 2009 12:34 PM
    Edited by: Abhee J on Feb 3, 2009 2:32 PM
    Edited by: Abhee J on Feb 3, 2009 2:51 PM

  • The material does not exist in plant or flagged for deletion

    Hi All,
    I have done the integration of R3 back end with SRM system (SRM 5.0) Classic scenario is working fine.
    In the direct Material Procurement I get an error message that "the material does not exist in plant or flagged for deletion".
    I checked R/3 side material is active only and I have assigned plant in extend attributes.
    Can you please help me to resolve this problem..
    Thanks
    Ravi

    Hi Ravi
    check you validit date from and to for that material in comm_product table.* if it is valid you can do shopping or else you cant.
    regards
    Muthu

  • Scheduling Agreement flagged for deletion

    Hi
    Once a scheduling agreement has been archived it is no longer visible from transaction ME33L, but can be viewed with Read program RM06ER30.
    When a scheduling agreement was flagged for deletion with the Pre-Processing program RM06EV47 it has not been archived yet, although a message stipulates that it has. ME33L is possible, but ME32L is not allowed.
    The particular scheduling agreement in question was flagged because it complied to the residence time configurations BUT business now want s it back (even though the lack of maintenance on their side caused the document to be flagged for deletion)
    How do we 'unflag' a scheduling agreement and take it back to its original state where it can be changed again?
    Your help will be appreciated
    Thanks

    Hi Jurgen
    I am waiting for authorization on MEMASSPO.
    In the interim, I noticed that field  LOEKZ contains the value L.
    I further notice that MEMASSPO is mass maintenance for Purchase Orders. Will I be able to only select one scheduling agreement to unflag?
    And lastly I noticed on our Dev environment that there are no variants created in the system. Where will I do this from?
    Thank you

  • Partner selection at sales order entry: ship-to's flagged for deletion

    Hi All,
    I need some inputs for the following issue.
    For Partner selection at sales order entry level: ship-to's flagged for deletion are also proposed as it is entered in customer master. I dont want to delete the ship-to's marked for deletion in the customer master.
    In short - only the ship-to's that are not marked for deletion should get populated.
    Kindly suggest if there is an userexit for the same.
    Regards
    KCB

    Hi,
    You can try Blocking option for the particular Ship to Party.
    But this will not disable it appearing in the Partner Function Selection Pop up.
    Once you block it; though it appear in the selection pop up, you cannot select & proceed, as it gives a error message.
    You can set this block in 2 ways.
    1 - Tx: XD05
    Go to the Tx give the customer number, sales area & Pres enter.
    There you can set different type of blocks depend on your scenario.
    Save
    2 - Tx: XD02
    Go to TX, Give the Customer number (Ship to Party) & go in. Since you have marked him as a delete, you'll get a warning message there too.
    Select Menu option -> Extras -> Blocking Data
    You'll coime to the same screen as above.
    Maintain relevant blocks & Save
    Check whether it satisfy your requirement.
    Best regards,
    Anupa

  • Materials flag for deletion upon creation of sale order

    hi experts
    When I use a material that is flag for deletion the system issues the following messge : "Material xxxx is marked for deletion"
    message no V1406 - application area: V1, message number 406
    This message is displayed only as "Information" only however I need to change to "Error" where the user will not be able to proceed.
    Any suggestion as how I can change this message to "Error"
    thanks

    Hello cyrus,
    You need to setup material status message and assign it to material master instead of changing the message (I think it is defined as warning message in program itself , experts pl. confirm)
    The following thread will helps you.
    http://www.sapfans.com/forums/viewtopic.php?p=515309&sid=d48b8c16cd95dbf811cfb970512c6cf6
    Regards
    Arif Mansuri

  • Is it possible to change PO item that is flagged for Deletion or Blocked ?

    other than to unflag the item.
    What I'm trying to determine is:  if the deletion flag is set or an item is blocked, is it correct to say that the date last changed (EKPO-AEDAT) is the date that the item was flagged for deletion or blocked ?  (I'm assuming only manual setting of the indicators and not update via a program method).
    Is there any way to effect EKPO-AEDAT after an item is flagged for deletion or blocked, without unflagging/unblocking ?
    (ECC 5.0 system)

    Hi,
    Once the PO line item is deleted, no changes other than reseting the delition indicator can be done. So EKPO-AEDAT will not be affected if a PO line item is deleted.

  • Info records flagged for deletion don't update purchase orders

    Hi, I would like to know how I can customize SAP-MM in order to avoid that the info records flagged for deletion update the purchase orders.
    When I create a PO from a Purchase requisition (which have data with texts like "Vendor material number"), the Info record flagged for deletion update this data.
    Thank you

    Hello
    I think inforecords flagged for deletion is not being considered for PO updation. Could you please check again.
    It might be posible that 'Vendor material number' is spcified in Purchase requisition and when you create PO from Purchase requisition, it is copied from there to PO.
    I hope it will resolve your issue.
    Best regards
    Avinash

  • Best practice for deleting multiple rows from a table , using creator

    Hi
    Thank you for reading my post.
    what is best practive for deleting multiple rows from a table using rowSet ?
    for example how i can execute something like
    delete from table1 where field1= ? and field2 =?
    Thank you

    Hi,
    Please go through the AppModel application which is available at: http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
    The OnePage Table Based example shows exactly how to use deleting multiple rows from a datatable...
    Hope this helps.
    Thanks,
    RK.

Maybe you are looking for

  • Sold to party showing editble mode in sales contract

    Hi all, I created a sales contract and followed by sales order, delivery billing the movement i am checking sales contract SOLD TO Party its showing editable  mode in contract over view screen and i check in header  partners it showing sold to party

  • Detecting file type in vba for word

    I have directories full of files on a Mac.  Most of these files are Doc files, some Txt files and some other types. Unfortunately the files don't have file extensions (not hidden but actually no file extensions).  On a PC in a macro I need to open th

  • 6/23/2014 - Beta - Flash Player 14.0.0.139

    The latest Flash Player 14 beta builds are now available.  Beta builds can be downloaded from labs.adobe.com. Testing Focus: The initial validation of SWF files is now more strict. In the event that a SWF fails the initial validation checks, it will

  • Specs of memory mac mini 2011 on a 2012?

    I have a mini 2011 w. 8gb ram. Planning to buy a mini 2012 i7. I look at the different specs of both versions for memory. Could i use the 8 gb of the 2011 in the 2012 ? (And either the 2012 4gb in the 2011 or i simply put back its original 4gb which

  • OBIEE 11g: Chart showing Hand Symbol on Over

    Hi All, We've an issue with Chart. Chart is currently showing Hand symbol when over the mouse on bars(Vertical or any type of bar) though no action link/drill enabled. Customer doesn't want the hand symbol pointer as user thinks that there is some na