Flag when record extracted from R/3 to BW

Hi,
Quick question, is there any way of indicating on the transaction “xxxxx” table whether the record has been transported ok to BW ?
i.e. can BW update a flag on the record on the transaction server when the record is collected ?
Thanks

Hi:
As far as I know, nope.
New and changed records in R/3 are copied to a set of internal tables known as "update tables". Those are system tables part of the whole process of updates, delta queues, etc...
Regards,
Luis

Similar Messages

  • Webcam Video pauses when recording sound from microphone

    I have a strange problem which i am encountering when recording and playing back webcam video.
    I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
    I am using AS 3.0, FMS 3.5 and flash CS 5.5
    When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
    I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
    I tried using the flvplayback component and even their it pauses.
    Any help is appreciated.

    Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
    However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

  • Error while importing record extracted from R3

    Our sceerio is R3-MDM one,
    When any changes occured in R3 in any masterrecord it will trigger change pointer and generate the record thru XI and send it to MDM inound file using XI.
    The error import server is not able to import it,taking into structural exception.
    When i import it manulayy it is showing error as
    "Logon error:Failed to Parse XML File
    Error:
    COM error 80004005 Unspecified error
    Source=    Description=
    SAX2 Error : errorCode=80004005,PublicId=,
    System Id=file//C://                    ................./matmas.xml,Line 2,Column=5045
    Error Message=Attribute ' SEGMENT ' has a value which does not match the fixed value defined in DTD/Schema."
    Can anyone help me in finding me out the solution,I can send the xml file and DTD file if maild id provided.

    Hi Nagalakshmi,
    Check for the above imp points for the MDM-XI-R/3 integration:
    - Firstly make sure your XML file contains all the three segments that are essential for processing the XML as pointed by minaz above (the control seg,data seg,status seg).The xml must be in the complete format.
    - Check and compare your XML input file with the XML schema that you are using in MDM for import.
    - If there are mismatch even in the form of field name or order of the field,your import will fail.
    So check for the above imp points.if there is an error in any o fthe above area your imp might fail causinga n exception to occur.
    Additionaly you can go through the integartion documents to check the steps you have followed are correct:
    /people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration  (MDM-XI-R3 integration)
    /people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration  (XI-MDM integration)
    /people/balas.gorla/blog/2007/02/05/r3-xi-mdm-outbound-scenario ((MDM-XI-R3 integration outbound scenario)
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Lots of audio pops when recording from mixer

    I'm using FCP 5.1.4 on a mac laptop (don't know what type it is, but think it's somewhat recent). I'm recording a stage play's audio.
    Here's my audio flow:
    Mixer's 1/4" headphone jack -> 1/4" Stereo audio cable -> 1/8" stereo adapter at other end (have also tried 1/8" mono) -> Laptop's microphone port (no other input audio port available)
    I can get a good signal, but there's constant audio pops/clicks happening at a steady rate. I remember reading somewhere else that problems can arise when recording directly from a mixer due to the high signal strength coming from it. Any ideas why this is happening? How do I fix this?

    Phillip Roh wrote:
    What is a mic bus level output?
    Most better mixers have direct bus ins and outs. Just like plugging in a mic.
    Laptop doesn't have a line in port
    Get a different computer if you're expecting to enjoy doing audio capture.
    If i used the RCA or XLR output jacks, would the popping still occur?
    Irrelevant, it's all about signal type, resistance, milliamperes, millivolts and milliwatts. Not connectors. You can put an XLR on your power supply and it wouldn't change the voltage.
    I think my workplace may have a few USB audio things lying around. Like it has 2 XLR input ports, then connects to computer through USB. Do you know if they tend to need certain software, or if they're plug and play?< </div>
    Unknown from here. this is not a FCP question.
    bogiesan

  • Recording Audio from additional sources:  Why doesn't the "Audio File" show

    Hi, when recording audio from another source and saving: where does logic store the file? Shouldn't it be in the "audio' folder or the set path you set it to>?
    For some reason after we record the "Audio File" we recorded is not to be found in the "Audio" folder we created within our project?
    clues?

    Can you define "from another source". I'll assume for now, you mean, from an external live source, like a vocal, or guitar.
    Yes, if you had saved the song using the "Save As Project" command, the audio path to that songs audio folder should have been set. and all audio files recorded into that song would reside in that location.
    The only thing that you might want to check, is hit "A" with the song open, and make sure "choose path" is set to "Song Recording Path" and not "Global Recording Path".

  • How to see deleted records in delta extraction from view

    Hi folks,
    i am currently reflecting about delta extraction from a view:
    The view contains a date field (change date) which is used to identify new or changed records.
    So the delta extraction of new and changed records works without problems.
    But what is happening with records that are deleted in the source system?
    My current understanding is that deleted records will not be shown in the view. Therefore the deletion is not visible in the extraction.
    - Is there a workaround for this problem?
    - How is deletion of records normaly handled in generic extractors? 
    - Is it impossible to extract a deletion when using views?
    any suggestions and help will be appretiated...
    bye

    Hello Florian,
    Generally records will not be deleted (until if you physically delete it from table) but will have a status deleted.
    So it doesn't matter whether you use view or tables the deleted records will be extracted through the view to update the BW data targets.
    Thanks
    Chandran

  • When I extracting data from DSO to Cube by using DTP.

    When i am extracting data from DSO to Cube by using DTP.
    I am getting following erros.
    Data package processing terminated (Message no. RSBK229).
    Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
    Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
    Data package processing terminated. (Message no. RSBK229).
    Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
    This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
    I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
    my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
    please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
    please help me out on this issue . I am not able to move forward .its very urgent

    hello
    Have you solved the problem ?  
    I have the same error...
    as you solve this error,
    can you help me please I have the same error
    yimi castro garcia
    [email protected]

  • Short dump error when extracting from one of the datasource in R/3 to BW

    When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
    Source code extract
    Get boundaries of next TID block
    L_FROM_INDEX = L_TO_INDEX + 1.
    IF L_FROM_INDEX GT NFILL.  EXIT.  ENDIF.
    L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
    IF L_TO_INDEX GT NFILL.
      L_TO_INDEX = NFILL.
      L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
    ENDIF.
    Create hashed index on TID of TID table
    CLEAR L_TH_TID_IDX.
    LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
      L_S_TID_IDX-TIDIX = SY-TABIX.
      L_S_TID_IDX-TID   = TIDTAB-TID.
      COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
    ENDLOOP.
    Select TID block from STATE table
    SELECT * INTO TABLE L_T_STATE
           FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
           WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
             AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
             AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
             AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
           ORDER BY PRIMARY KEY.
    Consistence check
    DESCRIBE TABLE L_T_STATE LINES L_LINES.
    IF L_LINES NE L_BLOCK_SIZE OR
       L_LINES EQ 0.
      MESSAGE X097(SY).
    ENDIF.
    PERFORM DELETE_BATCH_JOB
            USING    L_T_STATE
            CHANGING L_S_TID1.
    Update LUW-Status und Zeit
    CLEAR L_T_STATE_IDX.
    CLEAR L_TH_TID2_IDX.
    CLEAR L_T_TID.
    LOOP AT L_T_STATE INTO L_S_STATE.
      L_S_STATE_IDX-TABIX = SY-TABIX.

    Hi Pavan,
                     This is a table space error.
    Regards,
    rahul

  • TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

    when attempting a restore,  as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

    Hello JD_NINJA,
    Thanks for using Apple Support Communities.
    Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device.  To troubleshoot this issue please follow the directions below.
    Check your security software
    Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
    Get help with iOS update and restore errors - Apple Support
    When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
    Restore your device from an iCloud or iTunes backup - Apple Support
    Take care,
    Alex H.

  • I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards,  I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

    I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards,  I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

    iPhoto 9.6 cannot open iPhoto Libraries on CD/DVD. The iPhoto Library needs to be on a writable storage.  Copy the iPhoto library from the disk to a folder in your Pictures folder. And then run the iPhoto Library Upgrader on that copy, see this link:  iPhoto '11: About the Library Upgrader

  • Problem when recording from the AUX phono output using creative x-fi elite

    Hello everyone?Hopefully someone will be able to help me out here, as I've tried everything, however nothing seems to work. I am using the x-fi elite pro on a windows vista ultimate PC. When recording analogue material, from a tape Dec, for instance, I am using the creative audio console which accompanies the x-fi elite pro. I am using the aux phono input on the back of the box, and everything has gone smoothly until a few days ago. When trying to record from my tape Dec this last week, I suddenly noticed that the sound was very distauted in the left channel. Right channel was fine.Of course the first thing I checked was the level, and this was absolutely fine too, both channels were set to around 50% in the sound-options control-panel. I then checked the cable and then tried it on other equipment as well, and everything was also fine here. I then re-connected it to the audio consul, but got the same results. Fine sounding audio in the right channel, but distauted in the left. I then tryed re-installing the newest vista-driver to see if this would solve my problem, however it didn't. Now I've only got audio in the right channel, but no audio at all in the left. Has somebody inhere experienced anything simurlar, and if yes, can you please tell me what could be wrong??All the best from Allan

    On certain mobo/graphics card set ups and some sound cards there is an issue with bus latency. In short while playing back audio you will hear a frequent crackling of the audio. That is not the same as the slight click the Elite pro makes when changing modes. It has been a Creative issue for many years but is only present with certain combinations of hardware. I have experienced that issue myself but several years ago. My current Elite Pro/PC set up does not have this issue.

  • I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

    I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • Problem parsing XML with schema when extracted from a jar file

    I am having a problem parsing XML with a schema, both of which are extracted from a jar file. I am using using ZipFile to get InputStream objects for the appropriate ZipEntry objects in the jar file. My XML is encrypted so I decrypt it to a temporary file. I am then attempting to parse the temporary file with the schema using DocumentBuilder.parse.
    I get the following exception:
    org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element '<root element name>'
    This was all working OK before I jarred everything (i.e. when I was using standalone files, rather than InputStreams retrieved from a jar).
    I have output the retrieved XML to a file and compared it with my original source and they are identical.
    I am baffled because the nature of the exception suggests that the schema has been read and parsed correctly but the XML file is not parsing against the schema.
    Any suggestions?
    The code is as follows:
      public void open(File input) throws IOException, CSLXMLException {
        InputStream schema = ZipFileHandler.getResourceAsStream("<jar file name>", "<schema resource name>");
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = null;
        try {
          factory.setNamespaceAware(true);
          factory.setValidating(true);
          factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
          factory.setAttribute(JAXP_SCHEMA_SOURCE, schema);
          builder = factory.newDocumentBuilder();
          builder.setErrorHandler(new CSLXMLParseHandler());
        } catch (Exception builderException) {
          throw new CSLXMLException("Error setting up SAX: " + builderException.toString());
        Document document = null;
        try {
          document = builder.parse(input);
        } catch (SAXException parseException) {
          throw new CSLXMLException(parseException.toString());
        }

    I was originally using getSystemResource, which worked fine until I jarred the application. The problem appears to be that resources returned from a jar file cannot be used in the same way as resources returned directly from the file system. You have to use the ZipFile class (or its JarFile subclass) to locate the ZipEntry in the jar file and then use ZipFile.getInputStream(ZipEntry) to convert this to an InputStream. I have seen example code where an InputStream is used for the JAXP_SCHEMA_SOURCE attribute but, for some reason, this did not work with the InputStream returned by ZipFile.getInputStream. Like you, I have also seen examples that use a URL but they appear to be URL's that point to a file not URL's that point to an entry in a jar file.
    Maybe there is another way around this but writing to a file works and I set use File.deleteOnExit() to ensure things are tidied afterwards.

  • Cannot found url error when i try to play my camera recorded video from my iphone 4S running ios 5.01

    I got an error cannot Find url when i attempt to play my camera recorded video from my iphone 4S 32 gig. I try to restart my phone but still no luck. There was no problem previously, but suddenly i got this problem with no reason. I also unable to copy the video to my computer using itunes. So please helppp...
    Thanks a ton!!
    Note: My iphone 4S is running ios 5.01.

    See if it helps to delete the firmware file and download a new one:
    Rename, move, or delete the iOS software file (.ipsw)
    iTunes uses "ipsw" files to restore your iPod or iPhone. If those files are unusable, then try deleting them, renaming them, or moving the file to a different directory. This will cause iTunes to download a new copy of the IPSW. When a restore issue is specific to a user, it is likely due to an unusable .ipsw file. If removing the .ipsw file does not resolve a user-specific restore issue, then the issue is caused by other user-specific security software settings or iTunes preferences. Creating a new user will also cause new .ipsw restore files to be downloaded in the new user. You can find the ".ipsw" files in these locations:
    Mac OS X
    iPhone
    ~/Library/iTunes/iPhone Software Updates
    iPad
    ~/Library/iTunes/iPad Software Updates
    iPod touch
    ~/Library/iTunes/iPod Software Updates
    Note: The tilde "~" represents your Home directory.

  • I have recorded mono on a sony hxrmc200e how can i play stereo when I download from imovie to fce 4??

    I have recorded mono on a sony hxrmc200e how can i play stereo when I download from imovie to fce 4??

    While you really can't make a mono track true stereo, you can make it play to both left and right channels.  Pan the track to center (0), or you can duplicate the track and pan one copy left (-1) and the other right (1) ... or select both tracks in the Timeline (original and copy) and hit Option l (lowercase L) to make them a stereo pair.
    -DH

Maybe you are looking for

  • Import Standard Purchase Orders

    Hi Experts, I'm working in EBS 12.1.3, i'm creating the PO (Purchase Orders) using interface method. I inserted data into po interface tables and running 'Import Standard Purchase Orders' to create POs; It's working fine. My requirement is to submit 

  • Dequeue Advanced Options

    Hi I would like to know somebody had this kind of requirement earlier ( hope this is common requirement most of them will have) We are using AQ as part of our new design of app... how to achieve the following requirement using AQ (I am new to this co

  • I'm suddenly unable to run Dreamweaver CS5.5 - I get error 1, a configuration error. What to do?

    I am unable to run Dreamweaver CS5.5, all of a sudden. I get 'error 1' - looks to be a configuration error. Please help!

  • Mouse scroll with dockingstation!

    Hi guys! I got my self an IBM Thinkpab R51, and just bougth a dockingstation for this one. And everything is working well - except the mouse. Even though its a normal PS/2 mouse (connected using the dockingstation) I' m not able to scrool with my mou

  • IStumbler 98 crashes with 10.5.1 after a few seconds

    Does anyone recognize this? It runs fine for a few (15?) seconds, nice display, good info, then crashes every time. Any hints? Thanks. Process: iStumbler [1798] Path: /Applications/iStumbler.app/Contents/MacOS/iStumbler Identifier: net.istumbler.rele