Flagging only one image

Hi. I am a longtime Lightroom user but trying to give Aperture a chance. I want to be able to select 4-5 images and view them as large as possible (I'm using "view multiple" under view cycles and then be able to tag or rate only the one image I've selected of this group. I can do this in Lightroom but Aperture sees that all these images are selected and therefore all get the rating/tag. But I've only selected them for the purposes of viewing them larger, not to give them the same metadata.
Thanks
Andy

Hi Andy -- Welcome to our little sunny clearing in the orchard.
Aperture is subtle and deft, but not at all obvious.
There are at least two good ways to do what you want:
• Turn on "Primary Only". This will apply any changes you make to just the Primary Selection (indicated by the heavier border) and leave the other selected Images unaltered.
• Use the controls on the Info tab of the Inspector. These controls are always limited to the Primary Selection (just as the menu commands are usually applied to all selected Images). If there is a control you want that does not show, select a Metadata View that includes it, or add it to the Metadata View that you want to use. The same works for Adjustments as well.
Somewhat more confusing for beginners (and a little different that what you asked for):
• You can select a number of Images, show only one of the selection in the Viewer, and step through the _selected_ Images. Set the Main Viewer to "Show One", and use "{apostrophe}" to step through the selected Images.

Similar Messages

How to flag only ONE image when several selected in 'N' mode ?

Hi,
I want to compare several images in a same serie. I select. I press N key, then I select in strip bottom bar the group of picture.
I want to put a flag (or star) to only the ONE I prefer, but all pics get the flags or star...
I need to take out the reject by clicking each X of each pic to threw them away, and finally pick only the on I want...
How to pick or star only ONE image on N mode (ENSEMBLE Mode in french LR)
Manys tks
Fred

I can't reproduce your issue on Mac or Windows. Quite often when odd ball behaviour arises it's an indication that Lr preference file has become corrupt. Have you tried trashing your Lr preference file then relaunching the application? The name and location for the preference file described here Preference and other file locations in Lightroom 5

Flickering Image update (only one Image drawn on Component), 10+ Duke Dolla

I've made an RBGFilter for Images and Combined it with a Thread
to make an Image fade from Color to Grayscale.
I use it together with an home made JComponent. It works, but the Image flickers.
I've tried longer sleep periods (I thougt that maybe the filter was to slow) but it still flickered when changing the Image. I tried dubbel buffering, but couldn't get it to change the Image. Anyway, I suppose double buffering wouldn't help much, while it's only one Image to be drawn and it covers the entire Component.
Does anyone have a clue about how to do?? You'll get plenty of Duke Dollars!
(in the fade class)
public void run()
try{
while( !Thread.interrupted() ){
Thread.sleep( 70 );
//Change colors:
Image tmpImage = Toolkit.getDefaultToolkit().createImage(
new FilteredImageSource( colorImage.getSource(), fadeFilter ) );
ImageComponent.setImage( tmpImage ); //Home made component
//test if fading is finished...
catch( InterruptedException ie ){}
(in the home made component)
public void setImage( Image theImage )
this.theImage = theImage;
repaint();
public void paintComponent( Graphics g )
g.drawImage( theImage, 0, 0, this );
}

I dont know much about java but i do know a bit about MFC and this reminds me of a similiar issue in mfc. So heres my bet:
Calls to repaint do call directly to paintComponent they first execute some code that paints the background of the component then calls the paintComponent routine. Typically the background is white and this results in flickering.
Thats just a hunch. Because its similiar to an issue that you get in MFC around animation with framework paint calls.
You can play the hunch by calling paintComponent directly and see if your flickering goes away. If it does find a way to use repaint without it repainting the background before it calls paintComponent (im sure theres a way or a similiar framework routine)
One last thing? is the custom componet that your working with swing based? Cause swing based components are supposed to double buffer by default.

Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
I'm using Preview Version 7

Hello @kgingeri1,
Welcome to the HP forums.
If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
If ePrint works fine, it is definitely a Google Cloud Print issue.
Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

My iPhone show only one image Conect USB to iTunes (on PC).What i doing??

My iPhone show only one image: Conect USB to iTunes (on PC), and I do not restart my iPhone.What i doing?

Hello 2000Skyfall,
It seems your device may be stuck in recovery mode. At this point your device may need to be restored. Have you created a backup at any point via iCloud or iTunes? The following article provides details on recovery mode:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Get more help
Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Why won't Painter erase a keyword on only ONE image at a time?

This has been driving me crazy - I'd like to delete a keyword on select images. I have hundreds of keywords and many are nested, so sometimes I screw up and need to erase selectively. I thought this problem was a bug, but it has persisted into LR 2.4!
In Grid mode, I select Painter, choose a keyword and search through images where the eraser icon shows. However, if I then click on that image, Lightroom sometimes erases that one image, but more commonly erases four or five at a time! (No, they aren't highlighted.)
Any ideas? I'd sure appreciate them!
Deb

Thanks, Ian, but now I think it's a bug, not me. Occasionally, erasing with the Painter tool works fine, but more often it's truly a spray can out of control! I am using a tablet, not a mouse. Even if I highlight one image and then click quickly on the Painter, sometimes it will erase 3-6 additional images. I can't figure a rhyme or reason, except it seems more likely when I have hundreds of images showing.
I had wondered if there was a way to set the Painter to only erase one image at a time. If I slide it over images (like spraying), it often is out of control.
Thanks!

How to import RAW and JPEG, but see only one image?

This is driving me crazy.
I shoot sometimes RAW and sometimes JPEG on the same memory card. So some pictures have only a JPEG file, others (the ones I shot in RAW) have a RAW+JPEG pair (or at least, Aperture sees it that way when displaying the content of the memory card).
What I want:
- import only once
- for JPEG files, JPEG is imported as master
- for RAW files, RAW only is imported as master
There seems to be no combination of the import settings that lets me do this?!?!?!?
If, under the "RAW+JPEG Pairs" settings I select "RAW files only", all JPEG files DISAPPEAR from the import list. WHY? This setting should be for "RAW+JPEG Pairs" only, it should not affect images that only have a JPEG file. I want to import JPEG files as well, so I select "Both (RAW as master)". Now, in the imported project there are TWO images to deal with, which is not what I want.
Even if I were to import twice, how can I exclude the duplicates?

Please ignore my post. Aperture behaves correctly. I got confused because many pics look alike, but aren't really the same pic. Sorry for the confusion.

Make a PDF so it's contents are just one image (i.e. only one image per page)

Hello,
I am trying to put a watermark on a pdf and make sure that it can only be removed by actually having to photoshop it out.
I Have gotten as far as to where the watermark is an object on the page (see attached picture). However if someone really wanted to they could go into the contents bar and delete the xobject. I want to somehow merge the two x-objects together so if you delete it the whole page is gone.
The only way I've figured how to do this is by saving all the pages as jpegs and then re combining them. It works, but it creates a huge file. I would really like to be able to do something simpler preferably using the action wizard.
Does any one have any recommendations? It seems like there has to be a way to make a watermark extremely hard to remove.
Thanks

Why not encrypt the file with a password to prevent it from being edited?
If you want the file to be composed of images, what you're doing is the
right thing, but maybe it can be automated a bit better.

Flicker while redrawing an Image (only one)

I've made an RBGFilter for Images and Combined it with a Thread
to make an Image fade from Color to Grayscale.
I use it together with an home made JComponent. It works, but the Image flickers.
I've tried longer sleep periods (I thougt that maybe the filter was to slow) but it still flickered when changing the Image. I tried dubbel buffering, but couldn't get it to change the Image. Anyway, I suppose double buffering wouldn't help much, while it's only one Image to be drawn and it covers the entire Component.
Does anyone have a clue about how to do?? You'll get plenty of Duke Dollars!
(in the fade class)
public void run()
try{
while( !Thread.interrupted() ){
Thread.sleep( 70 );
//Change colors:
Image tmpImage = Toolkit.getDefaultToolkit().createImage(
new FilteredImageSource( colorImage.getSource(), fadeFilter ) );
ImageComponent.setImage( tmpImage ); //Home made component
//test if fading is finished...
catch( InterruptedException ie ){}
(in the home made component)
public void setImage( Image theImage )
this.theImage = theImage;
repaint();
public void paintComponent( Graphics g )
g.drawImage( theImage, 0, 0, this );
}

Create an adjustment layer then clip it to the layer you want to lighten by clicking between the two layers while holding the alt/opt key.

38 versions in project but only showing one image

I downloaded 38 photos to Aperture 3. I adjusted colour etc . Now when I open that project it shows only one image, however when I put the cursor over the name of the project in the library list it states there's 38 versions. Can anyone suggest where the other 37 might be hiding? I can't figure out where to look for them.

Paynter Girl,
Do you have a filter on? Look in the upper right of your browser window.
nathan

One Image for dual and single processor G5 machines

I'm working in a lab that has both single and dual processors G5 machines. There is only one image for both machines and I suspect that we have a few bugs with the single processor machines because of this. Has anyone else used one image for both single and dual processors? Have there been problems. I'm wondering if it is necessary to create two separate images.
mdinger

There is not difference in the images, but you might have problems with the single G5 machines and 10.4. Did you do the firmware upgrade?
I have ~10 single G5 and 25 dual D5 machines netinstalled from one image without trouble.
jotjot

How to delete keywords from more than one image at once?

Is there any way to delete all the keywords from a selected group of images all at once?
I've selected a group of images, but when I delete the keywords, it only deletes them from the highlighted (targeted?) image and not from the other selected images. I've also tried syncing metadata and I get the same results.
Help would be appreciated.
Antonio

Interesting bug I just found, I think.
When the Grid is up on the second monitor, only one images is affected by the deletion of the keywords. When I put the Grid mode back on the main screen, I was able to delete keywords from all the selected images.
Shouldn't it work the same no matter what screen the Grid mode is on?

Displaying only one photo at a time

something crazy has happened in my iPhoto program.
i have been using it for years now, but i cannot escape this situation.
my display preference was to see the rolls listed chronologically and from this screen i could open any roll, and by clicking on one of the revealed images, i would view that image, with a scroll list of the rest of the images in my library above that.
the problem now is that when i open iPhoto, i am seeing only one image in the "Edit" window, with the active blue frame around it. there are no images to scroll through horizontally above this blue framed picture. there is a scroll bar to its right that takes me through my entire library a single image at a time.
how do i restore the main screen so that i have a representation of all the film rolls? how do i get out of the single-image/blue border mode i am stuck in?

Hi tubby,
On the bottom right of the window is a slider. Slides the dot to the left to make the image smaller so you can see more than one across.
Lori

How do I insert part of one image into another in Elements 8?

I am testing Elements 8 and would like to, for example, take an eagle from one image and insert it into another. I've done this with other editing programs, but can't see how to do it here. If one is to use layers, then I have another problem. How does one open layers from more than one image in the palettes?

MS993 wrote:
I am testing Elements 8 and would like to, for example, take an eagle from one image and insert it into another. I've done this with other editing programs, but can't see how to do it here. If one is to use layers, then I have another problem. How does one open layers from more than one image in the palettes?
You can only view the layers of one image at a time. I believe E8's default setting is a maximized setting which allows for only one image in the workspace. If you change the setting in the menu to Cascade, you can have several images open in your workspace. I believe, that's under Window<Arrange. The layer's palette will display whichever image is currently selected.
There are several ways to do it. Here are a couple...
Copy/Paste...
One way is to select the eagle with a selection tool...magnetic lasso whatever...then copy the eagle into your clipboard. Edit<copy. (Shortcut = Ctrl + C on PC; Cmd + C on Mac).
Open the second image then paste. (Shortcut = on PC Ctrl + V; on Mac Cmd + V). This will add the eagle to the current image. Use the move tool to position the eagle.
Drag/Drop...
Alternately, change window<Arrange in the menu bar to Cascade. This will allow you to have more than one image in your workspace.
Open both images. Select eagle with a selection tool. Once selected, switch to the move tool. Drag eagle into second image.
Alternately, you could also lift the eagle to it's own layer then drag it over using the move tool. Release the mouse button when you are over the second image to drop the eagle. (Shortcut to lift selected eagle from the background to it's own layer = on PC Ctrl + J; on Mac = Cmd + J.)
Note: Both images should be the same or close to same resolution. The image that is dragged will adjust (resize) to match the background image resolution. (Low resolution images dragged into high resolution images are tiny whereas high resolution images dragged into low resolution images would be huge).

Branding using one image

Hello all,
I have an image/banner which I would like to replace default from SAP. But the image does not maximize full length leaving part of it empty. If I choose the option to repeat and the image become two images combining, which look very ugly. Is there a way where I can use only one image? or do I need to modify the jsp file. If yes, which jsp file do I need to do this?
Thanks so much for your help,

Hello guys,
Thanks for your response. There seems to be two cells in the branding area, even if you maximize the image you still have another cell right next to it. If you look closely at the default images from SAP, they only have one images with repeating branding connecting to each other. If you like, I will send the screenshot for you to take a look at.
Thanks again,
David

Flagging only one image

Similar Messages

Maybe you are looking for