Flags:Copy Data Points - Missing flags?
I'm using DIAdem 2012 to extract points from an FFT. Each time I use the "Flags: Copy Data Points" function the channels created are missing the last data point (flag). i.e. Channel contains n-1 points.
At the moment I'm adding an extra flag to ensure I copy all the flags I actually need but I'd apprcieate any advice, I may be missing something obvious... I've attached a screenshot.
Thanks in advance!
Padraig
Solved!
Go to Solution.
Attachments:
diadem flags.png 53 KB
Thanks for your suggestion Shalimar,
Your correct that all of the flags were not copied. I've since tried the same method of adding/copying flags on new data and havn't had any problems, all the flags are copied so it seems the problem is corrected. It may have been an operator issue rather than DIAdem!
Regards,
Padraig
Similar Messages
-
Using band zoom to select all data points within the band
I'm feeling stupid this morning. I'm a new user with 2011, but haven't figured out how to copy a portion of data. I can use view 2D axis system to view my data. Then I use band zoom to get to the portion I need, but for the life of me I can't get it to copy that portion. I have set flags at the beginning and end and such, but the best I get is the beginning point, a single no value point and the end point. I am not getting all the points in between the flags. Am I supposed to somehow flag all points in the zoom view? I have done a search, but can't figure out what I am doing wrong.
Robert
Solved!
Go to Solution.Hello Robert,
This is a pretty easy and straight forward thing to do:
Put you data into the VIEW window. Then pick the BAND cursor in the toolbar (see below)
Select the "Set Flags" icon in the VIEW windows with the data and the Band Cursor:
After you have the data selected with the FLAGS (the data points will be displayed in a thicker line style) click on the "Copy Data Points" icon:
You will get a full copy of the data in the band, copied to a new channel in the Data Portal. In the example below I dragged the new data into both windows (not that the red data is still highlited by the flags, this it's a thicker line style).
That should answer your question, please let me know if you have additional questions,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
How can I connect dots across missing data points in a line chart?
Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1 Column 2 Column 3
Aug 16, 2011 87.1 15.4
Aug 17, 2011 86.6
Aug 18, 2011 86.1
Aug 19, 2011
Aug 20, 2011 85.7 14.6
Aug 21, 2011 85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Transparency fill in line graph data points does not copy over to Pages
I have created some line graphs in Numbers, and they look beautiful. Since some of my data overlap and I want users to be able to easily see where all data is on the graph, I have made the data points transparent on the foremost line. This allows the other line (which data points are filled in with another color) visible "through" the foremost line.
However, when I attempt to copy the graphs into Pages, the data points of the foremost line are no longer transparent - they are filled with white. Obviously, this defeats the entire purpose of using a transparency fill!
What can I do to make this work?
Thank you,
G. PasarescuHi Yvan,
Thank you for the tip. Unfortunately, I need to embed several of these charts into the Pages document, and cannot use Numbers instead of Pages for the document.
Interestingly, if I copy the chart from Numbers and paste it into some graphics programs (like Pixen and Pixelator), the transparency is preserved. However, pasting the same copy into other graphics programs (such as Seashore or Photoshop) somehow flattens the image, removing the transparency, and I'm back to square one.
Using a graphics program as the bridge between Numbers and Pages reduces the quality of the chart - that's why I'd like to try to make this work in Numbers / Pages.
Thanks,
Geoff -
Wbadmin throws the following error when running on Win8.1 upgraded from Win8 and using the -allCritical flag.
Insufficient storage available
to create either the shadow copy storage file or other shadow copy data
I want to be able to get the operating system's state volumes and not use -include:c: in a fixed way for cases when os is not on drive C.
Any suggestions?Hi Yanivac,
For the issue, the target volume for a critical-volume backup can be a local drive, but it cannot be any of the volumes that are included in the backup. This is important.
Also, this error means that there is no enough space on the target volume.
I suggest you check the space on your target volume.
I would like to share the article with you:
http://technet.microsoft.com/en-us/library/cc742130.aspx
Regards,
Kelvin hsu
TechNet Community Support -
COPA cost based data source missing data in BI
Hi All,
We have a copa cost based datasource.User has complained that some data is missing in BI frrom R3.When we checked in Infopackage history no data loads got failed and all requests were succesful.
Is there still a chance that data might get missed.
I created a full infopackage and again ran the load .Again load is green and complete.Still the same data comes in PSA.
Should i need to check repair full request flag.
What could be the other reason.User sent the R3 COPA report screenshots highlighting the missing data.
Regards,
SushantHi,
Please check if all the value fields from ECC have been mapped in BI system.
May be the case that some value fields were not mapped & hence the data is missing.
try & reconcile your data with the data from table CE1<OP Concern> from ECC side.
u can Make use of transaction KE24 aswell.
Thanks & Regards,
VIraj Dhopavkar. -
REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue
Hi
This information is relevant to anyone who is doing upgrading to 11.1.1.3.0.
There are 2 options if you encounter the data labels missing on the Active Studio tab :
(1) Switch to Jrockit
-Edit setDomainEnv.sh in directory $MW_HOME/user_projects/domains/base_domain/bin
-Set JAVA_VENDOR variable
JAVA_VENDOR=Oracle # For JRockit
JAVA_VENDOR=Sun # For Sun JVM
You'll see that JAVA_HOME should then point to "$MW_HOME/jrockit_160_17_R28.0.0-679"
**Jrockit version packaged with the 11.1.1.3.0 install***
-Start services
(2) For people who want to use Sun JDK, access support.oracle.com -- look for patch 9553040
This will provide an upgrade to JDK 1.6.0_20-b03.
Follow the instruction in the read me file . Refer to the following notes
- Upgrade the JDK within the Application Server $OH per the instructions in Note 272808.1
- Upgrade the JDK within the Database $OH per the instructions in Note 418399.1
Regards
Payal
Edited by: PayalS on May 17, 2010 11:07 AMHi,
I'm having the same problem than you.
I install the new JDK but now everything work besides BAM.
That happens with you after the upgrade?
The error is :
java.lang.RuntimeException: Invocation target exception.
at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:196)
at oracle.bam.system.threading.LoadObjectDelegate.invoke(LoadObjectDelegate.java:41)
at oracle.bam.system.threading.SynchedHash.getObject(SynchedHash.java:104)
at oracle.bam.web.shared.WebPage.userAuthCheck(WebPage.java:1371)
at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:347)
at oracle.bam.web.shared.WebPage.processRequest(WebPage.java:316)
at jsp_servlet._8533.__startpage._jspService(__startpage.java:71)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.cache.ClientSideCache.doFilter(ClientSideCache.java:93)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.filters.GZIPFilter.doFilter(GZIPFilter.java:97)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.filters.ValidateBrowserSession.doFilter(ValidateBrowserSession.java:212)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.redirect.Redirect.doFilter(Redirect.java:80)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.filters.ValidateBrowserSupport.doFilter(ValidateBrowserSupport.java:133)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bam.web.filters.CharsetFixupFilter.doFilter(CharsetFixupFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
... 44 more
Caused by: oracle.bam.common.remoting.ServiceUnavailableException: BAM-00223: Service interface oracle.bam.adc.common.core.IDataStore is unavailable.
at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:190)
at oracle.bam.adc.api.util.Context.(Context.java:187)
at oracle.bam.adc.api.util.Context.(Context.java:161)
at oracle.bam.web.shared.WebPage.createContext(WebPage.java:248)
... 50 more
Caused by: oracle.bam.adc.api.exceptions.ServerUnavailableException: BAM-01261: Cannot connect to the Oracle BAM Server.
at oracle.bam.common.remoting.ConnectionPoolBase.getLocalService(ConnectionPoolBase.java:954)
at oracle.bam.common.remoting.ConnectionPoolBase.createProxy(ConnectionPoolBase.java:855)
at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:588)
at oracle.bam.common.remoting.ConnectionPoolBase.open(ConnectionPoolBase.java:77)
at oracle.bam.common.remoting.AgentBase.getServiceWrapper(AgentBase.java:179)
... 53 more
Thank you
CD -
Service po created with reference to preq , in po some fields data was miss
i was created preq with item type D and account assignment category = network , uploading point data and recipient data.
after that i was created po with reference to that preq , in that po uploading field , recipient field data was missing , how to get that data in service poHi,
In service documents and blanket PO's the "goods recipient" can not
be used. Please read the information from the note 118008:
The system does not display the goods recipient and unloading point
fields in the account assignment block for a service line even though
they are set as input fields in Customizing.
You cannot display fields 'Unloading Point' and/or 'Goods Recipient' in
the R/3 system. The reason for this is that every account assignment
object for each service specification can have several unloading points
and/or goods recipients.
In particular, only one cumulation for each account assignment object is
possible and useful at purchase order item level.
As of Release 4.0, user fields are available in external services
management.
You can name these user fields, for example, 'Unloading Point' and
'Goods Recipient'.
A user field belongs to the service line and is purely informative.
Regards,
Edit -
Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
ST1000LM024 HN-M101MBB disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Daemons: ℹ️
[failed] com.apple.spirecorder.plist
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Caffeine Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
20% WindowServer
6% com.apple.WebKit.WebContent(7)
4% Safari
3% hidd
1% launchd
Top Processes by Memory: ℹ️
1.07 GB com.apple.WebKit.WebContent(7)
439 MB kernel_task
90 MB spindump
57 MB mdworker(5)
57 MB Safari
Virtual Memory Information: ℹ️
4.54 GB Free RAM
3.46 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 04:47:31 PM Self test - passed
May 2, 2015, 01:39:52 PM /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
May 2, 2015, 01:23:20 PM /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
HozThanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz -
Can I dump out the data point of a curve in the equalizer?
Hi all,
After using the equalizer, I would like to dump out the data point of the following curve. Is there any method to dump out the data points?
Thanks a lot for your kindly help.
Leoleo_chan wrote:
I am sorry that I didn't state clear about my questions, My "dump out" mean to get the amplitude of the curve at different frequency. (say, 120 points / decade from 100 to 10000Hz)
No, there is no way of doing that from any of the filter plugins - they don't calculate like that internally, so there would be no easy mechanism for doing this. Even if you looked at the preset data, you'd only find the setup conditions for each filter band, not the total responses. The only place you can do anything like this is the Frequency Analysis window. Because this does an FFT of the entire waveform, the data is available - hence the 'copy to clipboard' option. -
Copy Performance Point lists between environments
Hello,
I would like to know if there is a way to copy paste Performance Point content lists and Data Connexion between 2 SharePoint 2013 environments (different farms)
Actually we use Dashboard Designer to create report, kpi, filter and Dashboard . We actually have many items in our production farm and would like to copy these elements into POC farm (same Active Directory, same Cube, OLAP)
Is it possible ? We already success to copy Performance Point content in the same farm between 2 differents web application or Site collection.
Best regards,Hi arimaze,
How did you copy PerformancePoint content in the same farm?
Whether you try to use "Export Content" and "Import Content" ribbon button in PERFORMANCEPOINT ribbon. Please do a test, and let me know the result.
In addition, there are two articles about migrating PerformancePoint content, please check if they are useful for you:
http://denglishbi.wordpress.com/2010/11/20/migrating-performancepoint-2010-content-to-new-server/
http://blogs.msdn.com/b/performancepoint/archive/2012/08/03/what-s-new-in-performancepoint-services-2013.aspx (8.server-side migrate)
Best Regrads,
Wendy
Wendy Li
TechNet Community Support -
Copying data to ext HD or memory sticks keeps failing
Been trying to copy data over to over drives and keep getting finder message stating that the folder I am copying over already exists! Now the folder doesn't fully exist as it is being copied over. The folder isnt hidden unless there is a setting im missing..... Im having a crap week with OSX this week! uh! For example I am copying a folder of office docs called office docs over to an ext hd with no folder on it called office docs. a couple of seconds into it and it stops gives me a message and say Finder cannot complete the operation as folder office docs already exists. It doesnt even prompt to replace.
where is the folder you are trying to copy located on your main hard drive? is it in your home directory somewhere? if yes run the following terminal command and try copying again (copy and paste please)
dot_clean -m ~
if it's located somewhere outside your home directory please specify where. -
Copying data to an external server during data acquisition
I need to copy out data to an external server for backup during an extended data acquisition session (days long). What is the safest data format for this operation that won't corrupt the primary data file? *.lvm, *.tdm, *.tdms?
ThanksHi Velveeta,
I would think that you would rather save to multiple files and then back them up on the server rather than try to make a copy of a file in the middle of its creation; as this would be more likely to cause corruption issues. If you are very concerned about this, I'd recommend breaking up the data to a couple of files and then backing them up. So, to answer your questions:
1. You can set up the express VI Write to Measurement File to create a new file every X data points. I'm unsure of how you are planning to programmatically copy this to a back up disk.
2. Don't copy a file in the middle of its creation (for example, if you were creating one file and tried to back it up in the middle of your acquisition).
3. The file format shouldn't matter for this functionality in particular.
Cheers,
Marti C
Applications Engineer
National Instruments
NI Medical -
How to include the 1st data point date time in x
Hi,
I use a formular in the Interval from "Axis range and interval"
=IIF(COUNT(Fields!Date_Reading.value, "DataSet1") <=48 ,1 , 12)
However, it always missed the 1st data point date/time, please advise on how to include it always ... !
Thanks !Hi kkcci8888,
Per my understanding that when you using the expression in the Interval you can't see the first date display in the label, right?
I have tested on my local environment and can reproduce the issue, the issue caused by the setting of the Interval. I assumed the 1st data point date time which haven't display means the minimum date in the report.
If you have specify an kind of "Interval Type", the first date not display as the label, if you keep the "Interval Type" as "Default", you will get it display correctly.
I recommend you to do the setting as below to get it display correctly:
Go to Horizontal Axis Properties
In Axis Options, Select the Axis Type as Scalar.
Deselect "Always include zero".
In Minimum box type [First(Sale_Date)]
note: make sure you have use the order by Sale_Date in the query to order the date already.
keep the "Interval Type" as "Default", the default means "Days", try to modify the expression to specify an new value of the Interval and the type will be "Days" by default.
Click "Labels" on the left pane to check you haven't select the "Hide first and last labels along with this axis":
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Documents & Data is missing from under iCloud in Settings on iPhone 4S, running iOS 6.
Hi,
Which operating system are you running on?
The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
Brian
Maybe you are looking for
-
I had recently changed my email address. I changed it through itunes but did not through icloud because I thought it would change everywhere. Now my phone is acting up andI need to reset it to factory settings and cannot because icloud wants a passwo
-
FCP7 keystroke not working correctly in PP CS6?
Command 'R' to render out a clip? Each time I do it Premiere Pro whips me back to the start of the timeline. I've started up a new project, still the same issue. I'm wondering if Premiere Pro will have a plist file, mmm, maybe I will go look .. But
-
Calling a Procedure and Variables with a : vs. a ?
Sorry, this is a long one, but I'm trying to provide as much background as possible. The below code (from a procedure called view_ibba_for_maint) is a snippet of code from a much larger SQL package. The package is called from a web browser. htp.table
-
Command Error in FTP_COPY function module
I need to transfer file to non-sap server and I am using function modules FTP_CONNECT and FTP_COPY to do the same. FTP_CONNECT establishes connection to server but FTP_COPY fails with raising exception COMMAND_ERROR (CERROR = 2). We are unable to tra
-
Having a PDF document close immediately after priniting
Hi guys, I need to know if it's possible to have a pdf document close immediately when print is selected..... In addition to this, is there something that can restrict the number of copies to 1. This is for a downloadable voucher and i don't want peo