Flakey vpn-addr-assign dhcp -- anyone else?

When we use vpn-address-assign dhcp we sometimes (often actually) get a failure to assign an address. This shows up as either an error 738 or error 720 on windows native clients.
Reconnecting immediately after the error generally works fine.
Does anyone else get this? Anyone have any ideas as to how to prevent these failures?
From viewing the logs I see the VPN successfully acquire an address from the DHCP server, so there are no problems on that end.

It looks PIX was missing an access-list entry on its outside interface permitting udp xxx for the isakmp tunnel.

Similar Messages

Vpn-addr-assign via DHCP

Hi,
We are facing some intermittent issue while connecting RA vpn users. This issue has started after upgrading ASA 5545-X 9.1.2 to 9.1.5-(10).
VPN users are successfully authenticated as per ACS logs, but its not able to complete the Phase 2 negotiation. VPN user ip address is configured to assigned from DHCP. However this is kind of intermittent as same users are able to connect some time, but not all the times.
Here is the configuration of one of the profiles and we have 3 similar vpn profiles.
group-policy XXX-VPN-Policy internal
group-policy XXX-VPN-Policy attributes
dns-server value x.x.x.x y.y.y.y
dhcp-network-scope 172.20.25.0
vpn-simultaneous-logins 3
vpn-filter value VPN-FLTR-ACL
vpn-tunnel-protocol ikev1 ikev2
split-tunnel-policy tunnelspecified
split-tunnel-network-list value xxx-VPN-ACL
default-domain value xxxx
tunnel-group xxxx-VPN type remote-access
tunnel-group xxxx-VPN general-attributes
address-pool xxxx-VPNPool-02
authentication-server-group RADIUS
default-group-policy XXX-VPN-Policy
dhcp-server 10.10.xx.xx
tunnel-group xxxx-VPN ipsec-attributes
ikev1 pre-shared-key *****
Can anyone advise what could be the issue, could this be a known bug.?
thanks in advance.

Hi Karthik,
Thanks for your reply, we can't use "no vpn-addr-assign local" command as some of the VPN groups are using ip address from local assigned pool.
Its a mix of both combination (local+DHCP)
Thanks for your time..

Is anyone else having trouble sending mail? I have a MobileMe subscription - not sure whether that is the problem. The Port assigned to my mail account on my iMac has a different number for the one recommended by Apple, but I hesitate to change it.

Is anyone else having trouble sending mail on an iMac running 10.6.8. I get a messsage that the server can't be accessed. Apple help suggests using a different port from the one that was originally set. I have a Mobile Me account. Any suggestions?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Anyone else seeing iBooks 1.1 as flakey?

Loaded 68 PDFs into iTunes (Books)
Devices iPad Books Sync Books - Selected Books {check}
Books - All selected
Sync with iPad
No books, no PDF button at top of iBooks App
iTunes/iPad shows 2.28GB of Books
restart iBooks
restart iPad
Takes several Syncs before the books and PDFs so up in iBooks.
Also the Bookshelf for some reason always sorts in reverse alphabet?
Anyone else seeing this.
Also had a few probs with PDFS that Preview opens fine but iBooks just displays as blank pages.
Curious

Yes, I had to do the exact same thing to get my PDFs to show up. iTunes said they were on the iPad, sync'd two-three times, restarted iBooks 2-3 times and then finally the PDFs tab showed up. Really bizarre! I'm just glad to have PDF support on the iPad but hope this will be fixed soon!

Anyone else having trouble with dhcpcd?

So I'm currently running arch on two machines, a laptop and a desktop, and I noticed a few days ago that the laptop couldn't get a network connection (using wicd). I traced the issue to the version of dhcpcd I was using from the testing repo, so I went back to the stable version and it worked fine. I recently ran my updates again on the desktop and laptop, and now dhcpcd won't acquire an address on either machine, so I have to do everything manually. Anyone else having this issue, or is it just me?

ZHoob2004 wrote:BARRIER BREAKER (Bleeding Edge, r39582)
The DHCPv6 server they ship is has a fault with reconfigure authentication which triggered a fault in dhcpcd.
Both upstreams have now been fixed.
but for now, dhclient is working wonders (and it's way faster), so I'll probably not be switching back when it is fixed.
dhclient is only faster because it doesn't do any ARP checking.
You can turn this off in dhcpcd if you know no-one else has stupidly assigned themselves the IP the DHCP client wants to give you.
See dhcpcd.conf(5) for the noarp option.

Unique situation - have not found anyone else with this one

Here goes:
PowerMac G5 running 10.4.4 was purring along nicely on Windows network, no problems for months. Strange power outage in that office. Power restored, computer boots fine.
Here's the interesting problem - everytime it goes to acquire a DHCP address, it finds that it's in conflict with MAC address xxxx.xxxx.xxxx. It quickly tries to grab a new one, but again shows a conflict - but continues to use the same MAC address as a "conflict" until it uses up all the IP addresses in the DHCP leasing scope, not allowing anyone else to acquire a new one.
OK - why not try assigning it a static IP - same problem - just starts popping up error after error - all the same MAC address - sequential IP addresses.
Try moving it to another port on the wall - did that - different office in same building, still same issue.
Moving it to a different network - now works fine - accepts its IP.
Trying another Mac at original location - same problem.
Trying PC at original location - no problem.
Searched network for annoying MAC address - does not seem to exist. Tried swapping out network card - same problem. Checked switches for ARP entries and looked at the MAC tables - no sign of the malignant MAC address.
And the clincher - have other Macs on the same network - no problems.
Except for that port on that wall - with any Mac - problem - with PC - no problem.
That particular Mac anywhere else in the same building - problem - other Macs in same building no problem.
Needless to say - it's been extremely frustrating. Does anyone have any ideas what I should check for? Thanks in advance.
PowerMac G5 Mac OS X (10.4.4)

Sorry - I forgot. The dialog that pops up is:
IP Configuration
<IP Address> is in use by <MAC Address>

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

Hello Arthur,
Thank you for the reply.
You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD , pen and paper and CDs .
Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
Thanks
Amanda

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

Has anyone else had a control key act stuck?

I couldn't type in my password the other day after some basic trouble shooting and calling Apple everyone was at their wits end. Then I saw it, in the lower left of safari in the grey boarder it said "display a menu" a quick search on my phone showed me it was the control key. After tapping this key a few times it went away. I currently have changed in the modifier keys section of the keyboard so caps lock is the control key and the control key functions are controlled by the caps lock. interesting thing is that caps lock isn't on all the time, i.e. just like how the control key was acting. I can't feel anything under the key, nothing has been spilled, the key works fine as CAPS LOCK, its just when the control is assigned to do control functions and only then, even assigning no action to it works. should i reinstall the last update? should I reinstall the OS? I did a time machine back up too, that didn't fix it.

Does it really matter whether anyone else has? If you have, that's a problem for you whether or not anyone else has experienced the same issue. Call Apple tech support or take the iPad to an Apple Store, if there's one in your area, and they'll replace the iPad unless it's determined that the problem was caused by some sort of accident rather than a factory defect.
Regards.

Launchpad key not working. Anyone else?

Hi Support Forums.
I just picked up one of the new Airs, and I restored everything from a Time Machine backup (of a computer that was running Lion GM). I'm having trouble with the Launchpad function key (F4). All of the rest of the function keys do their jobs properly, but the Launcpad one doesn't start up Launchpad.
I tried assigning a keyboard shortcut to Fn+(F4) and that worked properly, so it's not an issue with the hardware. And on the guest account, the key works properly, so it's specific to my user account.
I searched the forums, and I couldn't find anything about specific function keys going out. Does anybody have an ideas on what I can do to restore the key? Is there a plist that I can edit or delete? Is anyone else experiencing this?

Hi.
Re. " The command does not delete any of your specific keyboard shortcuts you have defined. "
Umm, sure it does. This unix command deletes the preferences file that tracks all of the keyboard changes that you make.
So, write down (snapshot) any/all functions so that you can re-assign them.
-Alan
Ps: The only exception to this are any "Application Shortcuts" hot keys.

Has anyone else experienced WiFi issues after installing Mavericks?

I recently installed Mavericks on my 2009 iMac. After the initial install, everything worked beautifully. After my first reboot, however, the network is having trouble staying connected to the wireless network. I verified the modem/roouter were working by testing on my other wifi enable devices (iPhone, iPad, Apple TV, etc).
My question really, if whether or not anyone else has experienced this after installing Mavericks official release and is this a known issue that I cannot seem to locate information on.
It should be noted that I often use a VPN service called Private Internet Access. And thought I havent had issues with this before any reboot, I thought it would be worth mentioning.
Thank to anyone's help in advance.

I've also been having a lot of issues with my wireless after I updated to Mavericks. For me, the problem is manifest whenever I'm using my system in a conference room with a lot of other folks who are also using wireless. The connection is up and down constantly, to the point where it's really not usable. Other folks in the room (who are using Windows systems) don't have the same issues. It's gotten to the point where _they_ are making fun of my me and my Mac (the tables have turned!).
I never had these issues when I was using Mountain Lion. Since it's the same environment and the same hardware (MacBook Pro, 15", Retina), I've started to suspect that Mavericks is the culprit.

Anyone else finding iCloud to be less than stellar?? It is slow and scrolling through my mail is absolutely painful.

Hi everyone - I've been an Apple fan for a very long time. Had one of the original iMacs. I have found iCloud to be one of the worst products that Apple has put together and am ready to discontinue the service. Just today I could not even get to my mail from my work PC. Scrolling through email is slow and "sticky" for lack of a better word. Is anyone else experiencing this with iCloud?
Thanks.
Liz

Glad you found a solution on your own! Your predicament sounds like an IP address conflict: your Mac and your iPhone competing for the same IP address in your DHCP lease; your router can satisfy one, or the other, but not both at the same time. Happened to me, and I had to renew the DHCP lease from System Preferences/Network while trying to connect both devices to the Internet at the same time; no more problems since then, but it all depends on the way your router handles simultaneous requests to the Web.

I can no longer synch music library and audio books, it says can only be synched with one of the libraries, anyone else had this?

i had to reboot my laptop, so reloaded itunes sofware, im now finding that when i'm synching my Iphone to synch audio books ive downloaded, , it says its synched with another itunes library ( my music) do i want to erase this iphone and lsynch with this iphone library, the music percentage at the bottom reduces to 0% in prep to erase.
anyone else got this problem?
Lee

try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore

HT201077 Since upgrading to IOS 7'photos taken on my iPhone are not transferring to the cloud. Sometimes a few will up load but then nothing for weeks. Anyone else had this problem

Since upgrading to IOS 7 the photographs I take on my iPhone 4S do not transfer to the cloud. Sometimes one or two of them transfer but then none for weeks. I have deleted photos from the cloud in case it is full but to no affect. I use my iPhone in conjunction with an iPad so this is driving me mad. Anyone else have this problem?

No you're not the only one having this problem in fact many people are having it I spoke to Apple support today about it. First it is my opinion the aspect ratio is different on iPhone 4s compared to iPhone 5s, however I really feel it is a software issue. Just to make sure I am having the same problem you are I will describe my issue. I Have confirmed the following: if I Center an object on my iPhone 4s screen and open the picture while I am still in the app (open on the bottom left it)looks fine. But when I open camera roll and open that particular picture it's also fine
Until I scroll left or right it pulls the image to the left side appearing to cut off the left side of the image. After talking to Apple support today and my knowledge with Apple products I strongly suspect this is a software issue. Apple asked me to do a restore as a new phone but I'm not going to go through all that nonsense when I believe it's a software issue and not a hardware issue. So again to recap to answer your question you're not alone, theses sort of things are expected when they rollout a new iOS just hang in there and let's see if they put a patch out for next update.

We have concerns with Adobe Acrobat DC - document cloud services and how it relates to HIPAA. Has anyone else worked through these issues?

We have questions relating to the Document Cloud services offered with Acrobat DC. We are considering disabling the cloud feature to stay in compliance with HIPAA. Has anyone else worked through these issues?

Hi mikem82897618,
You can refer the following link to know what can be done with Adobe Document Cloud Services when working in Acrobat DC:
Store Files Online, Share & Access From Anywhere | Adobe Acrobat.com
Also, visit this link to know more on how Adobe Document Cloud services are compliant with HIPAA security standards:
E-signatures vs digital signatures | eSign services from Adobe
Please specify more details on the same as why you would need to disable the Cloud feature.
What and where exactly are you facing the trouble?
Let me know.
Regards,
Anubha

Flakey vpn-addr-assign dhcp -- anyone else?

Similar Messages

Maybe you are looking for