Flaky External Monitor Detection

Anyone run into the problem where plugging in an External Display detects the display "most" of the time but not always. Often I'll plug in my external monitor and OS X fails to detect it. A reboot is often required and then it works. I'm assuming this is an outstanding bug with display detection in OS X.
Other info:
Usually book is closed when monitor is plugged in, then use wand or bluetooth periperals to wake Mac up.
I'm using the S-Video to analog adapter to connect to this monitor.

I'm having a simillar problem and it also happens just sometimes — most of the time there's no problem at all connecting to the external display, a LaCie photon20vision II.
The MacBook Pro is asleep when I connect the DVI cable for the external display. I also connect an ethernet cable, the power cable and an Apple USB keyboard with a Microsoft USB IntelliMouse. After that I press a key on the keyboard och click the mouse to wake it up. As I said this works fine most of the time. and I do this every week day, but today—and I remember it happened before—there was no signal for the external display. The light on the front of the MacBook Pro was static, so it wasn't asleep at least. Ater a while I opened the lid to see if there was anything on the "built-in" display, but no. I disconnected everything, tried to cles the lid to make the computer sleep again, which it didn't seem to wan. Tried to press buttons on the keyboard etc. but still nothing, even on the internal display.
Had to force restart.

Similar Messages

External Monitor - detected but nothing showing

Hello
I have recently bought a miniDisplayPort-to-VGA adaptor so I could set up an external monitor.
Whilst in Display settings the second monitor is being detected, I just have a black screen/no signal.
My MB Pro obviously thinks its there, as the mouse travels off the side of the screen to the extended desktop, its just that nothing is showing...
I have tried a lot of things like restarts, altering resolutions, tried another monitor, tried other cables - and nothing seems to let me have an external monitor running.
Is there something I am missing here?
Thanks for any help

If two monitors have been tried and neither worked, that casts a lot of doubt on the adapter. Even though it is new, it could be defective. I recommend taking it back where it was purchased for an exchange.

External monitor detected but no picture

I recently tried hooking up my 17 inch LCD gateway monitor to my 13 inch mac. My mac detects it and lists it under display properties however it does not actually have a picture on the monitor. The gateway just stays black or powers on and then goes black after saying no signal. I have a mini dvi to dvi adapter and then a dvi to vga adapter hooked up, which is then plugged into the monitor. My monitor has a dvi hookup along with the vga input but i unfortunately realized this after I bought the adapter. I figure if my mac sees it I should be able to get it working without buying another expensive cable.
Can anyone help?

I had the exact same problem with my 50" LG TV. I'll be looking forward to a reply.

Tecra M5 - External monitor detected but no picture

Hello,
I've just purchased Tecra M5 to use it with my external NEC monitor. However, whichever setting I try I get no picture on that monitor. The LED on the monitor indicates that it gets signal from the laptop but the monitor stays pitch black. The monitor obviously works fine, I've just disconnected it from another laptop.
I tried all possible settings in the nVidia control panel but no success. I also changed "Power On Display" in BIOS to "LCD + Analog RGB" but no luck either.
I have BIOS v.3.70 and graphic adapter drivers v.7.15.
Can anyone help?
Thanks,
Mike
P.S. When I press Fn + F5 I have no options to choose from, unlike with other Fn + ... combinations. I don't know wheter there should be any but maybe it is worth mentioning.
Also when I select "Only use one display" from the nVidia control panel and select my NEC monitor from the list, the monitor lights up and the LED changes to green, but the display is still black. As I cannot accept the changes the output switches back to the laptop display after several seconds.

Hi,
Thank you for a prompt reply and new ideas. I tried with Samsung monitor and used a different cable but the behaviour was similar - you could see the monitor reacting to changes (self-adjusting etc.) and there even were options to choose from when pressing Fn + F5 combination but the monitor remained either black (no signal) or blackish (sort of receiving signal).
I use Vista Business and I have that Value Added Package installed.

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Macbook Pro(Mid-2014) Not Detecting External Monitor

Hi everyone, I'm trying to connect my MBP to an external monitor via HDMI. Since my MBP has an HDMI port built in, I'm not using any adapters between it and the monitor. But nothing is happening when I connect the HDMI cable, my MBP does not seem to detect it. I have tested my monitor with that HDMI cable on a desktop PC, and it all works without any issues there, so I reckon it must be something on the MBP end of the connection. But what could it possibly be? I have looked through forums and read countless threads about external display problems, but have not found any info that could identify the problem. I have tried booting my MBP and/or turning on my monitor before and after connecting the HDMI cable, and there was never even a hint of detection.
I'm running OS X Yosemite 10.10.1, and the external monitor in question is an HP Pavilion 27Xi in 1080p.

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

Macbook Pro detects external monitor as TV

Hi,
I recently purchased a new MacBook Pro with Retina display. I plugged in an external monitor for the first time today and noticed that the screen looked blurry. I have seen on other forums that its a font smoothing issue but I ran that command in the terminal with no sucess. In my case its just not the font that is blurry, everything is blurry. I believe the problem is stemming from OS X detecting my external monitor as a television. Is there anything I can do to fix the issue or am I stuck waiting for Apple to update their video drivers. As a developer I like having as much screen space as possible but reading text on the secondary monitor is giving me a headache its so blurry.
My external monitor is a 24 inch Samsung with a max resolution of 1920x1080. I am connecting it via the Apple mini display port to DVI adapter.

It was set to 1080p, 1920x1080 did not show up as an option (even when holding the option key). 1080p should be equivlant. As as experiment I grabbed another monitor that was not being used. It is a 22 inch LG with a maximum display of 1920x1080, and its currently set to 1920x1080. The issue is a little different, was not detected as a TV this time, but the screen still looks blurry. There may be some improvement but not much.

My iMac no longer detects my apple external monitor

As a teacher, I moved classrooms this school year. After the move, my external monitor is no longer detected by my iMac. I've connected the cords just as they were previously. When I go to the Systems Preferences > Display, there is no Arrangement tab. Please help!

Hello cbecnel
There are a few things to try and they are outlined in the article below. One is to try a different cable and another one would be to try that display with another computer to help isolate the issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G.

MacBook Pro 2011 does not detect external monitor

I have a MacBook Pro 13'' early 2011 runing Lion 1.7.2.
I have an HP v185ws external monitor connected via an Apple Thunderbolt to VGA connector.
Since last month's Thunderbolt firmware update, my external monitor is no longer detected.
Does anybody has a solution to this problem?
Thanks.

I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.

Can't detect external monitor, shows only 640x480

Hi,
I'm using a Macbook Pro Unibody 13" 2.53GHz to connect to a Dell 2408WFP external monitor. It worked FLAWLESSLY with my old Macbook Pro using a DVI cable.
1) I first bought the infamous mini-Displayport to DVI adaptor. It didn't work (red static etc. check the page of this product on Apple's store website : you'll see it's a known issue). Cost me 35$
2) I then bought a mini-Displayport to Displayport cable. Thought it should work perfectly. It DOES NOT. The Macbook is apparently UNABLE TO DETECT my Dell and gives it a default resolution of 640x480. Which is ridiculous knowing that the Dell 2408WFP is capable of displaying 1900x1200.
It's really a pain. Does anyone know about this problem or have an idea how to solve it?
Thanks,
P.

Ok,
It was neither the cable nor the computer (thanks Apple). It was the monitor's EDID profile. Dell's problem.
There's two ways to fix this. 1) It is possible (I did it) to create a custom profile using SwitchResX. You'll need to hook up your computer to the monitor using a working connexion (I used DVI) and then use the "export" function in SwitchResX. It will give you a text file. In it you'll have enough data to fill SwitchResX' form to setup a custom profile. You'll then need to restart the computer, hook it with the Displayport cable and try to use this custom EDID profile. It worked for me.
For example (and hoping it will help others) here are the data you need to setup a custom profile for the Dell 2408WFP :
Descriptor #0 - Timing definition:
Mode = 1920 x 1200 @ 59,950Hz
Pixel Clock............. 154,00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1920 pixels 1200 lines
Front Porch............. 48 pixels 3 lines
Sync Width.............. 32 pixels 6 lines
Back Porch.............. 80 pixels 26 lines
Blanking................ 160 pixels 35 lines
Total................... 2080 pixels 1235 lines
Scan Rate............... 74,038 kHz 59,950 Hz
Image Size.............. 519 mm 324 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Positive horizontal polarity
2) Of course, you can call Dell and tell them about it. They are sending me a THIRD replacement monitor for this. Be prepared when you call them : I spoke with two representative (and among them a "senior technician") who DIDN'T know what was a Displayport. They even tried to sell me the idea that 640x480 is the native resolution for Displayport. It was hilarious. Really. I got them to look it up on Wikipedia.
Case solved. Apple 1 - Dell 0.
P.

Used to, but now can't detect a NTSC/PAL external monitor.

This has come up in this forum as well as others in the past. Here is the syndrome:
1. iBook (or other) is hooked up to an external NTSC/PAL monitor (in my case a Sumsung LCD TV) via the mini-VGA/S-Video out.
2. Works perfectly for some period of time, days to years, as far as I've seen people post.
3. Suddenly, iBook does not recognize the external NTSC monitor, and outputs crap onto the monitor.
4. Detect display in the preferences only gives the native LCD (ibook) and a VGA external monitor.
5. This doesn't go away, and no one has found a way to make it go away.
Anyone figure out what the crap is going on with this? ANYONE HAVE A SOLUTION???

Pullout the Battery of working phone - Insert it after a minute - Then Check
Regards Eree - Follow me on Twitter - Facebook - Google+
For More visit My Blog

External monitor. Works with Vista but not detected in Windows 7

I have an external monitor connected to my laptop which runs vista and win 7. However, when I use the WIndows 7 OS, the monitor is not detected. Any tips?

Hi,
Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

External monitor not detected

I just got a Samsung SyncMaster 2033 SW Plus monitor and tried connecting through the DVI port of my MacBook Pro, but its not getting detected. I'm using the mini display port to DVI adapter to connect. The monitor seems to work perfectly when I connected to the VGA port of my PC, but its not even been detected on the mac. I checked system profiler and it says no external monitor connected. Please help!!

I have a similar problem with my new MBP. I have tried to connect it to my ViewSonic VP920b via the Mini DisplayPort to DVI, but get no video on the external monitor. The system profile shows it as connected, and if I turn mirroring on/off, my MBP monitor changes resolution to mirror (or not) the external, but there's no picture, just black screen.
I've tried
•closing the lid, connecting the external Mini DisplayPort, then waking without opening the lid,
•changing the energy saver preferences to each of the 2 graphics card (Graphics Card: better battery life/better performance),
•changing the external monitor resolution through all the possibilities,
•restart with the external monitor connected
•restart without the external monitor, then connect.
Current settings:
VIDIA GeForce 9400M:
Chipset Model: NVIDIA GeForce 9400M
Type: GPU
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0863
Revision ID: 0x00b1
ROM Revision: 3448
gMux Version: 1.8.8
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Built-In: Yes
VP920 Series:
Resolution: 1280 x 1024 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: On
Mirror Status: Master Mirror
Online: Yes
Rotation: Supported
Since the System Profile software can contact the monitor, and since the MBP screen changes in response to connecting or disconnecting the external monitor, I believe it's safe to assume there is no problem with the DVI cable or the MiniPort Display dongle. I just have no video displayed on the external monitor
Any suggestions?

External monitor not detected on Thinkpad W530 intel-virtual-output

I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
$ optirun true
$ intel-virtual-output
Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00*+ 50.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
How can I debug this? Why is the external screen not detected any more?

Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
Below is my log with an external screen connected via Mini DisplayPort and after running:
$ optirun true
$ intel-virtual-output
a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
╰─➤ cat /var/log/Xorg.0.log 1 ↵
[ 2.616]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2.616] X Protocol Version 11, Revision 0
[ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
[ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
[ 2.616] Build Date: 09 January 2014 08:47:24AM
[ 2.616]
[ 2.616] Current version of pixman: 0.32.4
[ 2.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
[ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.627] (==) No Layout section. Using the first Screen section.
[ 2.627] (==) No screen section available. Using defaults.
[ 2.627] (**) |-->Screen "Default Screen Section" (0)
[ 2.627] (**) | |-->Monitor "<default monitor>"
[ 2.628] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.628] (==) Automatically adding devices
[ 2.628] (==) Automatically enabling devices
[ 2.628] (==) Automatically adding GPU devices
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.638] (II) Loader magic: 0x804c80
[ 2.638] (II) Module ABI versions:
[ 2.638] X.Org ANSI C Emulation: 0.4
[ 2.638] X.Org Video Driver: 15.0
[ 2.638] X.Org XInput driver : 20.0
[ 2.638] X.Org Server Extension : 8.0
[ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.589] Initializing built-in extension Generic Event Extension
[ 3.589] Initializing built-in extension SHAPE
[ 3.589] Initializing built-in extension MIT-SHM
[ 3.589] Initializing built-in extension XInputExtension
[ 3.589] Initializing built-in extension XTEST
[ 3.589] Initializing built-in extension BIG-REQUESTS
[ 3.589] Initializing built-in extension SYNC
[ 3.589] Initializing built-in extension XKEYBOARD
[ 3.589] Initializing built-in extension XC-MISC
[ 3.589] Initializing built-in extension SECURITY
[ 3.589] Initializing built-in extension XINERAMA
[ 3.589] Initializing built-in extension XFIXES
[ 3.589] Initializing built-in extension RENDER
[ 3.589] Initializing built-in extension RANDR
[ 3.589] Initializing built-in extension COMPOSITE
[ 3.589] Initializing built-in extension DAMAGE
[ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.589] Initializing built-in extension DOUBLE-BUFFER
[ 3.589] Initializing built-in extension RECORD
[ 3.589] Initializing built-in extension DPMS
[ 3.589] Initializing built-in extension Present
[ 3.590] Initializing built-in extension DRI3
[ 3.590] Initializing built-in extension X-Resource
[ 3.590] Initializing built-in extension XVideo
[ 3.590] Initializing built-in extension XVideo-MotionCompensation
[ 3.590] Initializing built-in extension XFree86-VidModeExtension
[ 3.590] Initializing built-in extension XFree86-DGA
[ 3.590] Initializing built-in extension XFree86-DRI
[ 3.590] Initializing built-in extension DRI2
[ 3.590] (II) "glx" will be loaded by default.
[ 3.590] (II) LoadModule: "dri2"
[ 3.590] (II) Module "dri2" already built-in
[ 3.590] (II) LoadModule: "glamoregl"
[ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3.615] compiled for 1.15.0, module version = 0.6.0
[ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.615] (II) LoadModule: "glx"
[ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.618] (II) Module glx: vendor="X.Org Foundation"
[ 3.618] compiled for 1.15.0, module version = 1.0.0
[ 3.618] ABI class: X.Org Server Extension, version 8.0
[ 3.618] (==) AIGLX enabled
[ 3.618] Loading extension GLX
[ 3.618] (==) Matched intel as autoconfigured driver 0
[ 3.618] (==) Matched intel as autoconfigured driver 1
[ 3.618] (==) Matched modesetting as autoconfigured driver 2
[ 3.618] (==) Matched fbdev as autoconfigured driver 3
[ 3.618] (==) Matched vesa as autoconfigured driver 4
[ 3.618] (==) Assigned the driver to the xf86ConfigLayout
[ 3.618] (II) LoadModule: "intel"
[ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.623] (II) Module intel: vendor="X.Org Foundation"
[ 3.623] compiled for 1.15.0, module version = 2.99.911
[ 3.623] Module class: X.Org Video Driver
[ 3.623] ABI class: X.Org Video Driver, version 15.0
[ 3.623] (II) LoadModule: "modesetting"
[ 3.624] (WW) Warning, couldn't open module modesetting
[ 3.624] (II) UnloadModule: "modesetting"
[ 3.624] (II) Unloading modesetting
[ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.624] (II) LoadModule: "fbdev"
[ 3.624] (WW) Warning, couldn't open module fbdev
[ 3.624] (II) UnloadModule: "fbdev"
[ 3.624] (II) Unloading fbdev
[ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.624] (II) LoadModule: "vesa"
[ 3.624] (WW) Warning, couldn't open module vesa
[ 3.624] (II) UnloadModule: "vesa"
[ 3.624] (II) Unloading vesa
[ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 3.624] (++) using VT number 1
[ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 3.625] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.625] (==) intel(0): RGB weight 888
[ 3.625] (==) intel(0): Default visual is TrueColor
[ 3.625] (**) intel(0): Framebuffer tiled
[ 3.625] (**) intel(0): Pixmaps tiled
[ 3.625] (**) intel(0): "Tear free" disabled
[ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 3.625] (II) intel(0): Output LVDS1 has no monitor section
[ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 3.625] (II) intel(0): Output VGA1 has no monitor section
[ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[ 3.625] (==) intel(0): DPI set to (96, 96)
[ 3.625] (II) Loading sub module "dri2"
[ 3.625] (II) LoadModule: "dri2"
[ 3.625] (II) Module "dri2" already built-in
[ 3.625] (==) Depth 24 pixmap format is 32 bpp
[ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 3.627] (==) intel(0): Backing store enabled
[ 3.627] (==) intel(0): Silken mouse enabled
[ 3.628] (II) intel(0): HW Cursor enabled
[ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.628] (==) intel(0): DPMS enabled
[ 3.628] (II) intel(0): [DRI2] Setup complete
[ 3.628] (II) intel(0): [DRI2] DRI driver: i965
[ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
[ 3.628] (==) intel(0): hotplug detection: "enabled"
[ 3.628] (--) RandR disabled
[ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.650] (II) AIGLX: Loaded and initialized i965
[ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.732] (II) LoadModule: "evdev"
[ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.734] (II) Module evdev: vendor="X.Org Foundation"
[ 3.734] compiled for 1.15.0, module version = 2.8.2
[ 3.734] Module class: X.Org XInput Driver
[ 3.734] ABI class: X.Org XInput driver, version 20.0
[ 3.734] (II) Using input driver 'evdev' for 'Power Button'
[ 3.734] (**) Power Button: always reports core events
[ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.734] (--) evdev: Power Button: Found keys
[ 3.734] (II) evdev: Power Button: Configuring as keyboard
[ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.734] (**) Option "xkb_rules" "evdev"
[ 3.734] (**) Option "xkb_model" "pc104"
[ 3.734] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3.755] (II) No input driver specified, ignoring this device.
[ 3.755] (II) This device may have been added with another device file.
[ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3.755] (**) Sleep Button: always reports core events
[ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3.755] (--) evdev: Sleep Button: Found keys
[ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
[ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
[ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3.755] (**) Option "xkb_rules" "evdev"
[ 3.755] (**) Option "xkb_model" "pc104"
[ 3.755] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
[ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
[ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 3.756] (**) Integrated Camera: always reports core events
[ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
[ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
[ 3.756] (--) evdev: Integrated Camera: Found keys
[ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
[ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
[ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 3.756] (**) Option "xkb_rules" "evdev"
[ 3.756] (**) Option "xkb_model" "pc104"
[ 3.756] (**) Option "xkb_layout" "se"
[ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
[ 3.757] (II) No input driver specified, ignoring this device.
[ 3.757] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.757] (**) Option "xkb_rules" "evdev"
[ 3.757] (**) Option "xkb_model" "pc104"
[ 3.757] (**) Option "xkb_layout" "se"
[ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.757] (II) LoadModule: "synaptics"
[ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
[ 3.758] compiled for 1.15.0, module version = 1.7.4
[ 3.758] Module class: X.Org XInput Driver
[ 3.758] ABI class: X.Org XInput driver, version 20.0
[ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.758] (**) Option "Device" "/dev/input/event12"
[ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.783] (**) Option "TapButton1" "1"
[ 3.783] (**) Option "TapButton2" "2"
[ 3.783] (**) Option "TapButton3" "3"
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3.794] (II) No input driver specified, ignoring this device.
[ 3.794] (II) This device may have been added with another device file.
[ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3.794] (**) ThinkPad Extra Buttons: always reports core events
[ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 3.795] (**) Option "xkb_rules" "evdev"
[ 3.795] (**) Option "xkb_model" "pc104"
[ 3.795] (**) Option "xkb_layout" "se"
[ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 3.824] (II) UnloadModule: "synaptics"
[ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.824] (**) Option "Device" "/dev/input/event12"
[ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.844] (**) Option "TapButton1" "1"
[ 3.844] (**) Option "TapButton2" "2"
[ 3.844] (**) Option "TapButton3" "3"
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 3.855] failed to find screen to remove
[ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
[ 3.855] (II) config/udev: removing device Video Bus
[ 3.863] (II) evdev: Video Bus: Close
[ 3.863] (II) UnloadModule: "evdev"
[ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.863] (**) Video Bus: always reports core events
[ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.863] (--) evdev: Video Bus: Found keys
[ 3.863] (II) evdev: Video Bus: Configuring as keyboard
[ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.863] (**) Option "xkb_rules" "evdev"
[ 3.863] (**) Option "xkb_model" "pc104"
[ 3.863] (**) Option "xkb_layout" "se"
[ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
[ 3.863] (II) config/udev: removing device Video Bus
[ 3.870] (II) evdev: Video Bus: Close
[ 3.870] (II) UnloadModule: "evdev"
[ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.870] (**) Video Bus: always reports core events
[ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.870] (--) evdev: Video Bus: Found keys
[ 3.870] (II) evdev: Video Bus: Configuring as keyboard
[ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.870] (**) Option "xkb_rules" "evdev"
[ 3.870] (**) Option "xkb_model" "pc104"
[ 3.870] (**) Option "xkb_layout" "se"
[ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
[ 4.540] (II) intel(0): Printing DDC gathered Modelines:
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 7.358] (**) Option "Emulate3Buttons" "false"
[ 7.358] (**) Option "EmulateWheel" "true"
[ 7.358] (**) Option "EmulateWheelButton" "2"
[ 7.358] (**) Option "YAxisMapping" "4 5"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 7.358] (**) Option "XAxisMapping" "6 7"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
[ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 7.359] (II) No input driver specified, ignoring this device.
[ 7.359] (II) This device may have been added with another device file.
[ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

Flaky External Monitor Detection

Similar Messages

Maybe you are looking for