Flaky USB Wireless Connection on Mini

I've recently installed a Hawking USB Wireless adapter 802.1 B/G to connect to the internet via a 3-Com router located in house with a strong signal. My hubby has been using the same router on a Windows machine with no problems for quite some time. The adapter is connected through a 4-port USB hub and has been working ..... most of the time.
If I have to restart my computer, it has trouble reconnecting. When this happens, the Hawking utility shows that it's connected with strong signal, but my safari displays a not connected to the net message. I'll remove it, double check the utility which will update to show no device, replace it and it will locate the adapater again and again with strong signal, but safari is no dice.
I've gone into the Settings and it will inevitable have defaulted back to the internal modem which is not set up. I'll change it to ethernet, renew the DHCP lease and still no dice. What's worked, so far, is to simply go to bed and hope in the morning it's back on.
Thoughts?

From the description of your problem, you apparently have an early G4 PPC Mini with just 2 USB ports, an internal modem, but no airport.
The kind of problems you are encountering is one reason why I (and others) consider USB to be the least satisfactory way to connect a Mini wirelessly to the ethernet.
And USB wireless via a hub adds another layer of complexity.
A preferable method for a Mini with just 2 usb ports would be to use a wireless ethernet bridge, which plugs into the ethernet port of the Mini.
I question whether anyone here will have a solution for your Hawking problem. And if not, I'd recommend going the wireless ethernet bridge route.
Alternatively, the most reliable solution is always to run real ethernet cable between the computer and the router. Since you have such a strong signal, perhaps they are not so far apart as to make this impractical.

Similar Messages

  • USB Wireless connections not working in Latitude E6320 , Windows 7

    Dear all,
    I having an issue with an external USB wireless network drive.
    I can install with no issue, however it appears always disabled on the network connection.
    Someone had a similar problem?
    thanks
    José Luz

    Dear Hemalatha,
    Thanks for your support on this issue
    I tried to updated all network drivers but with no success.
    Indeed disabled all the networks, I took several print screen
    Please take a look below:
    - All the network drivers are enabled execpet the TP-Link
    - All the network drives are disabled
    When I tried to enable TP-Link, i get this message
    If we take a look at Computer manager, you can see that everything is disabled except TP-Link
    However I´m unable to work wit it.
    Thanks once again for your support.
    Thanks
    José Luz

  • Using USB & Wireless Connections on C6380

    Hi,
    I want to connect my Desktop PC to new C6380 via USB and then connect laptops via wireless.  What's the procedure?
    Thanks,
    Keltic

    Start installing the software on your PC, and when prompted, plug in the USB cable. then the installation should complete.
    now, on the printer, go to the setup menu>Netowork>Wireless Setup wizard. the wizard will help you connect to your wireless netowrk.
    now install the software on your laptop, and select the connection type as Network/wireless. then installation should find the printer online and install it, and you should be good to go.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Cannot maintain wireless connection mac mini time machine

    I have an iMac and a mac mini in the same room equidistant from my Apple TimeMachine. 
    While I have constant wireless contact on the iMac, the mini is constantly loosing connection, experiencing extremely slow response, etc.  I have to go through diagnosis nearly everyday to have it reconnect to the internet.  This started happening several months ago.

    Use the advice in this thread to investigate the signal and noise levels that each Mac sees:
    http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
    By the way, to avoid future confusion with forum posts, please distinguish between a Time Capsule (an Apple Wi-Fi base station with an integrated disk drive) and Time Machine (backup software included with OS X since version 10.5).

  • 3com usb wireless connection

    I have a 3com wireless 11g router and run for the kids a number of pc which all run fine on a 3com usb thing when operating wi-fi. However, my airport card will not work with the box and I don't seem to be able to find a driver to download for the USB thing to make it run on the mac. I'm on OSX on a G3 ibook.
    Any help or advice would be greatly appreciated.
    Thanks
    Rob

    There probably is no available driver for your 3 com wireless usb device.
    You need to get an apple airport card but as apple no longer sell these cards you have to get them from ebay, in the UK you can also get them from cancom but they cost £100. Some resellers in the US have them.
    The cheaper alternative is to use a usb wifi dongle that does work on OSX.
    Any devices that use the ralink chipset will work on your Mac.
    check out the ralink devices.
    You can then use Ralink Drivers

  • Windows downloading data unnecessarily from the internet when connected to wireless (wifi connection) or USB wireless 3G connection

    Hello Team/windows Experts,
    I need help from  you people on this issue that i am facing. I tried to find out the exact reason behind this, however i am not successful on this.
    Here is the issue:
    I recently re-formatted my laptop and re-installed windows 8.1. After that, I installed only couple of software program i.e. Mozilla Firefox and installed Bit defender total security 2015 and I updated my Antivirus software. I have two ISP connections, one
    is USB 3G wireless connection and another one is a normal wired connection to which a wireless router is connected (wifi connection). 
    Now, this is what I have seen happening. The moment i connect to the 3G usb wireless connection and even if i don't open any browser or website, I see that the data is being downloaded and i can see enormous amount of data being downloaded for no reason
    and I couldn't find as to what is being downloaded to my system. One can imagine and understand 10-15 Mb downloaded in couple of minutes and the connection sitting idle and not downloading anything later is fine, but if nothing is being accessed/browsed and
    still seeing 200-300 mb data being downloaded is something to be watched for.
    The same situation was seen when i enabled my wireless connection from another ISP provider (wifi) and don't know within a minute or so 50 MB data was consumed and to see what its actually doing, i waited for another 5 -10 minutes and huge data was downloaded
    (may be another 100-200 MB).
    Now before using my internet connection, I have done the following to ensure that unnecessary data is not downloaded from both USB 3G and wifi connection:
    1. I don't run any torrents. They are absent.
    2. I disabled automatic windows update
    3. I have disabled live tiles so that consant update to the windows app tiles are off.
    4. I have turned metered connection on for both the networks.
    5. I don't download anything from internet unless very important related to my studies. I do very normal browsing.
    I am pretty sure that antivirus signatures are not more than 5 mb or so (they are even smaller in files), so they won't eat that much data. 
    If at all, I have to see what is being downloaded to my system, where can i find that detail/information?
    How should I stop this from happening as i have to watch my 3g USB stats every now and then to see if its downloading lot of data or not?
    As this is a recently formatted system, I don't see any malware/virus issues as I have my system protected. Although now software can protect the system fully, but still i haven't access/browsed any website that might cause issues to my system. However,
    this is something i am trying to find out and if you guys can help/suggest me, it would be great.
    Warm Regards,
    R Janak Sundhar

    Hello Janak,
       1. make absolutely sure windows update is disabled, for this test.
       2.  Disable windows defender etc. for this test.
       3.  go though  programs and features and remove anything that is not needed or you thing might be sucking bandwidth.
        4.  hit CTRL ALT DEL, select task manager, more details, startup tab and disable everything as a possible cause of your issue.
    See if any of this makes a difference.
    Thanks, John

  • Can I use a wireless router to share a USB broadband connection

    Hi - I have an emac or a mac minin which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
    Rather than getting an airport card for the mac mini, could I use that as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
    Or do I either:
    1) need to get airport for the Mac Mini
    or
    2) Get a ethernet modem to plug into the wireless router
    Any advice appreciated?
    Tommy banana

    Sorry my first post was a little unclear.
    Hi - I now have an emac and a mac mini, both of which which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
    So that all can connect at the same time and rather than getting an airport card for the mac mini, could I use the mac mini as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
    Or do I either:
    1) need to get airport for the Mac Mini
    or
    2) Get a ethernet modem to plug into the wireless router
    Any advice appreciated?
    Tommy banana

  • Photosmart 4780 Wireless connection without USB cable on mac!!!

    Dear all,
    My mac pro does recognize the printer via USB connection anymore. I tried to turn on the wireless connection on the 4780 but could not find 'hpsetup' in wireless networks.....
    Is there any other way to connect this thing wirelessly or do i need to buy a new printer ??
    regard
    Ruben  

    Hey everyone.. I have the ultimate solution for this:
    1- On your small printer screen, go to wireless settings, press on WSP - press "push button" 
    2- Go to your wireless router panel - by using the IP address of the router (mine is 198.122.3.3), go to "Wireless" and press the WSP Button (two rounded arrows) 
    another option:
    1- On your small printer screen, go to wireless settings, press on WSP - press "Pin" 
    2- Go to your wireless router panel, go to "Wireless" and pput the PIN number that you see on the small screen.
    For further readings, please go to this link: http://www.hp.com/global/us/en/wireless/printer-setup-help.html

  • Why can't I connect my mini to a wireless network?

    Please help!
    I moved into an apartment and trying to join my roommate's wireless. I have entered his Network name and password and tried this every way I can think of but always get "Connection timeout" as a response. my roommate's macbook shows about 15 wireless networks in the area with his dropdown menu bar icon and my mini shows about 2-3 at any given time and as i'm looking at them they pop in and out of the menu. Which makes me wonder about my antenae and why I am not detecting the number of networks he is on his macbook sitting right next to me. Any ideas? I am at the end of my wits trying to figure this out.

    kruzline,
    Run the [hardware test|http://support.apple.com/kb/HT1509] that came with your mini.
    If the Airport wireless card checks out, you might want to [check this out|http://www.123macmini.com/forums/viewtopic.php?t=22230&sid=1bde03893cefd9b3 6ecaa0fc648cd06d].
    Wireless has been a fairly consistent sore spot for mac minis. Some people have improved reception by putting the mini on its side. Others have bought Apple-compatible USB wireless dongles and used them instead of the internal Airport card.
    Since you won't be carrying the mini around the apartment, ethernet might make more sense.
    -Wayne

  • Can any generic USB wireless device work on my Mac Mini?

    I am needing to connect my computer to the internet and i was wondering if just any generic USB wireless device will be able to connect too my wireless router???
    if not what would be my best bet?

    It would not be accurate to say that any generic USB wifi adapter will work with MacOS because not all have suitable drivers. Some do, but I suspect the majority do not. Many of the adapters that exist will work with Windows however, if you have an Intel mini and run Parallels, Fusion or BootCamp, because the vast majority of drivers are written for Windows rather than MacOS.
    However, there are some USB adapters that do work (http://www.engadget.com/2008/07/30/asus-usb-n11-wireless-n-usb-adapter-ships-wit h-ezlink/ for example). If you are considering such a device, ensure it has MacOS drivers either supplied or available for download, and specifically that the drivers are suited to the MacOS version you have.
    Be aware that USB is probably the least reliable way to connect a system, so it shouldn't be regarded as a best possible network solution!

  • Connecting Mac mini to wireless

    We bought an older mac mini that we're trying to connect to our wireless network. It doesn't have an airport card. We have an airport extreme that we've connected to our wireless network, and then plugged the ethernet cable into the mini. We still can't get it to connect to the internet.
    Anyone know what we are doing wrong here? Thanks so much.

    You can join a wireless network.. but this puts the Extreme in client mode.. not bridge.. so the extreme is a dumb client.. no wap, no switch, no nothing.. it is totally useless.
    Is there anything else I can do?
    -or-
    do you have a good recomendation for a USB wireless stick?
    Use ethernet or EOP (homeplug) adapters.
    Use a Netgear bridge. Or some universal bridge that works with the netgear.
    I do not have a recommendation on USB wireless.. to be truthful I avoid them like the plague.. USB is not a great interface .. at least up to latest usb3 and you won't have one of those..
    What I would do is buy a second hand extreme or express which are pretty cheap now and make the bridge between apple routers.

  • Wusb11 only connecting to wireless connections for 5 mins at a time??

    My wireless reciever wusb11, will only connect to wireless connections within 5 mins of plugging it in. If i unplug it then plug it back in "I get another 5 mins of internet then it drops all connections and says no networks in range.

    first off , update the drivers of the WUSB11 .. and try changing the following settings on the wireless router /  AP ..
    channel - 1 or 11
    security mode - wpa
    beacon interval - 50
    RTS and fragmentation threshold - 2304

  • Mac mini and existing Airport wireless connections

    Hi.
    If i purchase the new mac mini duo processor...I can supposedly hook it up to my old iMac and run Tiger on it...correct?
    I am using Airport extreme to connect wirelessly to the iMac, the iBook and my Powerbook. Which Airport would I use then for the iBook and Powerbook?
    I also have a PC that I tried to hook up to the Airport using a special app but that did not work. Now, if I hooked it to mac mini, I could then connect wirelessly using the mini's Airport?
    Is anyone else totally overwhelmed by how fast technology advances? Most of these discussions...I have no idea what you are talking about.
    If the mini is easy, sure to work, will update my system to Tiger, will still run some of my old iWork, iTunes, iPhoto, iLife, iDVD, Photoshop applications...then I will be happy.
    But it won't update all of them to Tiger? will it?
    I think I need a Mac iPsychotherapist.
    PowerBookG4, iMac, iBook, Blue & White G3   Mac OS X (10.3.9)  

    To upgrade your old iMac to Tiger, you will need to buy a retail copy of Mac OS X 10.4 (Tiger). You cannot use the Mac OS X install disk that comes with your new Mac mini to update another computer.
    If you want, you can move your iWork files, iTunes music, iPhoto pictures and other files & projects to your new Mac mini. The Mac mini will come with iLife '06, the current version, but you should be able to import all your files. The Mac mini comes with a 30-day trial version of iWork '06, you may need to buy a new, full copy to keep using iWork on your new Mac mini.
    To answer your AirPort questions, let me first make sure I understand your set-up. You have an older iMac that is connected to the Internet with wires. Your iMac has an AirPort card inside and you're using that AirPort card to "share" your iMac's Internet connection with the other computers? Or do you have an AirPort Extreme Base Station and all three of your current computes are connected wirelessly?
    If you have an AirPort Extreme Base Station, there's no reason you couldn't connect your new Mac mini to that network. There's also no reason you shouldn't be able to connect your Windows PC to that network.
    -Doug

  • Connecting mac mini to USB monitor didn't work!!

    I connected new Mac mini(2007 model) with the latest HP USB monitor. Nothing got displayed on the monitor. Then I need to connect mac-mini to another VGA connector monitor. But still want to know to connect USB monitor with mac-mini as this is my target setup.

    Thank you.
    I used Tiger OS specific drivers from the following link.
    www.displaylink.com/support/mac_downloads.php
    Now it's working but not 100%. Upon starting of the mac-mini monitor works fine. But later when I switch off and switch on the monitor, then it doesn't work. Looks like monitor off -on trigger is not handled in the driver.
    I will check with the driver like you have suggest and then acknowledge.

  • Ipad mini wireless connection crashes home network

    New ipad mini connects to home wireless network, but other computers on the network lose connection to include the ipad mini.  Happens quite frequently.  Any ideas on why this is happening?  And how to fix?

    HI, thanks for your response.
    No I do not have the Mac enabled in my router. Just at the point were I can add one new wireless connection there does not appear anything. Unfortunately I this is my only wireless connection so no caomparison with an other working system is possible.
    Ben

Maybe you are looking for

  • Firefox will not open my html files

    In the finder, when I double click on an html file, it should open up the file in Firefox. On my new macbook pro, after using the migration assistant, this feature did not transfer properly. I know how the "open with" system works on get info. When I

  • Need to upgrade from my Treo 650

    I have a Treo 650 that is getting old, but I love it. I use it to manage my entire life! Should I replace it with another Treo 650? Or is there another Palm product that I can upgrade to that I can transfer all my data to?  I use my Treo 650 (Verizon

  • What are the impacts of IB control set to No at Master level

    What are the impacts of IB control set to No at Master level, but the item is serialized at master and Org level. These are service items.

  • Portege 600-Windows Setup experienced an unexpected error - Error Code: 0x0

    Hi, During a Windows 7 upgrade I am getting the following error message. Windows Setup experienced an unexpected error - Error Code: 0x0. Searching on web I've found recommendations for setting the DMA on the optical drive (can't), updating the bios

  • Nexus 5K L3 Design (Best Practice)

    Hi All, I have a few questions regarding the L3 capabilities of the 5548UPs. We have the enterprise licensing with the L3 Daughter card and want to route from our 4500-X VSS' to our Nexus 5548s running version: 6.0(2)N2(3) Our design is that our data