Flaps has been removed but..

My flaps has been removed while I was charging my device, but i have managed to reinsert it
Does this affect the waterproofing?
Is my phone isn't waterproof anymore?

Hi ispammee,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you get the handset to a service agent, they will be able to perform a vacuum test on the device to see if the seals are ok. Please use the link below to contact Sony Mobile Customer Care to arrange this.
http://support.sonymobile.com/global-en/contactUs/
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Risks has been removed but Mitigating Control still stays with the users?

    Hi all,
        I have a situation where after a risk has been removed from the users by removing the violating roles, however the Mitigating Control still remains tagged to the same user. Is there any efficient way of removing Mitigating Controls from users where the risks no longer exists?

    Hi Joseph, thanks for the info. My problem comes in when the user request to have the violating role removed via CUP and it so happens that the Mitigating Control assigned for the old risk still has 6 more months of validity left. It seem like there is no mechanism to auto remove this MC when the role has been removed after the request in CUP have been approved and auto-provision.
    My problem is that there might be many more of such users with redundant MC assigned to them in RAR. I can't find a way to search for such redundant MCs for cleanup. There is a possibility that when the same roles are assigned back to the users via request in CUP, these redundant MC if applicable will cause the Risk Analysis via CUP to not flag out any SoD issue.

  • I was recently attacked by registry dr and conduit malware. Malware has been removed, but since then thunderbird is slow and doesn't respond. How do I fix it?

    I was attached by registry doctor and several conduit malware programs. I had the malware removed from my computer. But ever since them thunderbird has been very slow or not resonding at all. l have uninstalled and reinstalled thunderbird twice. The first time it seemed like it fixed the problem for a few minutes, but then it stopped respondig.
    I have tried opening in safe mode, and the first time it seemed like it worked better, but before long it stopped responding.
    Any idea what the problem is and what to do about it?

    See if any of this helps. My guess is that it is your McAfee.
    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues

  • Phone says sim card has been removed

    Hi I'm having issues with my galaxy s4 saying my sim card has been removed but it hasn't. I really need phone for my work. What should I do

    1) The SIM card may be damage,you may need a new SIM card.
    2) Phone Sim card slot maybe broken,that could be a costly repair.
     Turn off the phone,try take the battery and SIM card out and put it back in and restart again.
    If it still saying SIM card had been removed......the above may happen. Good luck!!

  • How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

    How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

    FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
    But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
    Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

  • Not receiving icloud verification email, have checked spam etc..phone is just saying account not verified, the address was linked to my husbands account but has been removed.

    Not receiving icloud verification email, have checked spam etc..phone is just saying account not verified, the address was linked to my husbands account but has been removed, prior to this it was saying it was already in use.
    If i change to an old address it works fine but all my apple equipment uses a current googlemail address and dont want numerous ids
    My itunes account/icloud account only shows this address, albeit on icloud its not verified
    My husbands accounts dont have this address anywhere
    Where is the verification mail going????

    All...sorted so thought i owed it to you all to update...
    As suggested on numerous sites it was in my spam folder....but because i am using googlemail it was in the Googlemail Spam on my phone and online google account, the spam wasnt getting to my outlook account (where i was looking for it!!!)
    As soon as i opened it there they were all 38 verification emails !!!!!
    Hope this helps

  • ITunes message: an ipod has been detected but could not be identified properly.

    For some reason my ipod nano 7th generation will not connect to iTunes anymore. It comes up on my computer but iTunes will not "identify" it. I have tried resetting my ipod and unistalling iTunes then reinstalling and following the help intructions online. Anyone know how to fix this? Cheers.

    I recently began receiving this message when i try to sync my ipod to itunes:  " an ipod has been detected but it could not be identified properly."   Never had this problem before.  Have tried all troubleshooting suggestions.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Goods receipt when PO creator has been removed from org structure ?

    Hello in my organisational structure PPOMA_BBP, i have 2 users, X and Y.
    X has created a PO in the SRM portal.However , X has been removed from the org. structure.
    Is it possible for Y to make the goods recept( that is , Y logs in the portal and makes the goods receipt) ?

    Hi
    Did you try to delete the user ? Did you get any error message?
    Note 1148837 - SRM user cannot be deleted
    When trying to delete an SRM user the system will check if there are still
    related SRM documents in the system. If there are active documents in the
    system the deletion is not possible. This is the correct system behaviour.
    But even if all related SRM documents are archived the deletion is
    sometimes not possible, because there are residual entries in table
    CRMD_PARTNER linked to this user.
    More Terms
    User crmd_partner residual entries deletion active document
    Cause and Prerequisites
    Solution
    The attached report PARTNER_SET_DELETE will display in simulation mode all
    residual entries in table crmd_partner with invalid item or header links
    and in non simulation mode it will delete the corresponding crmd_partner
    entries.
    Header Data
    Release Status: Released for Customer
    Released on: 10.03.2008 11:54:37
    Priority: Correction with low priority
    Category: Help for error analysis
    Main Component SRM-EBP-PD Procurement Document Methods
    Additional Components:
    SRM-EBP-ADM-USR SRM User Administration
    Valid Releases
    Software Component Release From
    Release
    To Release and Following
    SRM_SERVER 500 500 500
    SRM_SERVER 550 550 550
    Support Packages
    Support Packages Release Package Name
    SRM_SERVER 500 SAPKIBKS14
    SRM_SERVER 550 SAPKIBKT12
    Correction Instructions
    Ref note 550071 too..
    regards
    Muthu

  • New Photo in OS X option to edit photo with external editor such as Photoshop has been removed. will this be back!

    Hi
    I have just updated my iPhoto to Photos in OS X and i have noticed that the option to edit photo with external editor such as Photoshop has been removed. will this be back!
    Its now a pain to send a photo directly to my favourite photo editing software.
    Ross

    Thanks Terence
    Totally understand being a new app and not an update.
    So i'm a ammeter photographer and i like the way i can view my photos in iPhoto and i'm happy with the new App for this also, however i like to edit my photos in PS from time to time and i shoot in raw. As i can no longer select edit in external editor from the photo app i tired to drag a RAW photo to PS but this didn't work. i then tried dragging to desktop but this then made a jpeg so i loose my raw advantage. I would like to be able to find my original raw photos easily so i can edit them in PS.
    Hope that makes sense?
    Ross

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • How to show a row has been "removed" from a table

    We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED and NO_CHANGE without any problem, but I'm not sure how I can determine that a row has been REMOVED when it no longer exists in the next version.
    I have provided an example piece of SQL below:
    with w_acct1 as
    (select 'A1' acct, 0 vers from dual
    union all
    select 'A2' acct, 0 vers from dual
    union all
    select 'A3' acct, 0 vers from dual
    union all
    select 'A1' acct, 1 vers from dual
    union all
    select 'A2' acct, 1 vers from dual
    union all
    select 'A1' acct, 2 vers from dual
    union all
    select 'A4' acct, 2 vers from dual)
    select a.*,
           nvl(lead(acct) over (partition by acct order by vers desc),'NULL') ld,
           case when lead(acct) over (partition by acct order by vers desc) is null then
                   'ADDED'
               when lead(acct) over (partition by acct order by vers desc) = acct then
                   'NO_CHANGE'
               else
                   'REMOVED'
               end add_remove
    from w_acct1 a
    order by vers,acctWhich gives me the following result:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A1     2     A1     NO_CHANGE
    A4     2     NULL     NEW
    The result I want is:
    ACCT VERS LD ADD_REMOVE
    A1     0     NULL     NEW
    A2     0     NULL     NEW
    A3     0     NULL     NEW
    A1     1     A1     NO_CHANGE
    A2     1     A2     NO_CHANGE
    A3     1     NULL     REMOVED
    A1     2     A1     NO_CHANGE
    A2     2     NULL     REMOVED
    A4     2     NULL     NEW
    Note the REMOVED rows associated with the version even though they don't exist in the dataset for that version number.
    Can this be done with analytic functions or some other cool Oracle feature I'm missing?
    Regards
    Richard

    You can't know about a row being removed unless you have a record of that row somewhere, either as a copy of your old data (see example below) or you've recorded the information using delete triggers etc.
    SQL> ed
    Wrote file afiedt.buf
      1  with old_data as (select 1 as id, 'A' as dta from dual union all
      2                     select 2, 'B' from dual union all
      3                     select 3, 'C' from dual)
      4      ,new_data as (select 1 as id, 'A' as dta from dual union all
      5                    select 3, 'X' from dual union all
      6                    select 4, 'Y' from dual)
      7  --
      8      ,ins_upd as (select * from new_data minus select * from old_data)
      9      ,del_upd as (select * from old_data minus select * from new_data)
    10      ,upd as (select id from ins_upd intersect select id from del_upd)
    11      ,ins as (select id from ins_upd minus select id from upd)
    12      ,del as (select id from del_upd minus select id from upd)
    13  --
    14  select 'Inserted' as action, null as old_id, null as old_dta, new_data.id as new_id, new_data.dta as new_dta
    15  from new_data join ins on (ins.id = new_data.id)
    16  union all
    17  select 'Updated', old_data.id, old_data.dta, new_data.id, new_data.dta
    18  from old_data join new_data on (old_data.id = new_data.id)
    19                join upd on (upd.id = new_data.id)
    20  union all
    21  select 'Deleted', old_data.id as old_id, old_data.dta as old_dta, null as new_id, null as new_dta
    22  from old_data join del on (del.id = old_data.id)
    23  union all
    24  select 'No Change' as action, new_data.id as old_id, new_data.dta as old_dta, new_data.id as new_id, new_data.dta as new_dta
    25  from new_data where id not in (select id from ins_upd union all
    26*                                select id from del_upd)
    SQL> /
    ACTION        OLD_ID O     NEW_ID N
    Inserted                        4 Y
    Updated            3 C          3 X
    Deleted            2 B
    No Change          1 A          1 A
    SQL>

  • HT1353 im trying to download games on to the ipod touch 2nd gen and looks like the software driver has been removed,what does that mean and how do i sort it?

    i have an iod touch and aparently the software driver has been removed and i had it restored to factory settings as i bought it from someone,what does this mean and how do i solve the problem

    Just what error message are you getting?
    Are you trying to redownload them directly to the iPod?
    If you are getting an error message that included Open GL 2 or similar that means that the app requires that but only the 3G and later iPods support that.

  • I POD HAS BEEN DETECTED BUT CANNOT BE IDENTIFIED PROPERLY

    my 6th generation nano shuffle when plugged in responds with the message: 
    "i pod has been detected but could not be identified properly"
    then i am prompted to reinstall itunes. have done this but the problem remains.
    i cannot sync from my itunes.
    help please?

    I spent an hour on Apple help last night with this problem. We tried all the obvious things first:
    1. resetting the ipod.
    2. changing USB ports
    3. removing all other USB connections.
    4. Uninstalling Itunes and installing a fresh copy.
    5. clearing the saved application data (in Application Data / Itunes a hidden file on my version of Windows 7).
    6. changing the drive letter in disk manager (the ipod would not show up with Itunes installed but did show up when it was uninstalled).
    7. Deleting the USB connection and allowing it to reestablish itself in Device Manager (the USB connection showed up in device manager with a conflict notification).
    NONE OF THIS FIXED IT!
    I got to the second level of tech support and we repeated most of the above.
    Here is what worked in Windows 7.
    1. Go to Device Manager (click on Start / control panel/ Hardware and Sound / Device Manager).
    2. In device manager click on the drop down arrow for the "Universal Serial Bus Controllers".
    3. Right click on the "Mass Storage Device" (all other USB drives should be removed prior to this) and choose "Update Driver Software".
    4. Browse to C drive / Program FilesX86 / Common Files / Apple / Drivers and click ok to update the USB drivers.
    NOTE my copy of Itunes did NOT have a driver file in this location! so instead we pointed to the same location as above except instead of Program Filesx86 we used the same path except using "Program Files" with NO X86!
    C drive / Program Files / Common Files / Apple / Drivers
    Once the driver updated I rebooted the computer with the Ipod attached and it recognized the ipod.
    I think that not having the driver files in the X86 path is a bug in the software. I hope this helps!!

  • Ipod has been detected but cannot be propberly identified

    ipod has been detected but cannot be propberly identified
    i tried everything my itunes will not proberly identify the ipod

    uninstalling and reinstalling iTunes,
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • IPhoto & iCloud has been removed when I reinstall?

    I have a problem, my applications iPhoto & iCloud has been removed when I reinstall it to Mac OS X Lion. I need to purchase to App Store?

    Hi, Philipp,
    Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
    Kind regards, K.

Maybe you are looking for