Flash 10.0 not recognized CentOS

Not sure the exact version of flash because it is the new one. If it were working correctly
I could view the flash version on the web site. A "strings" command on libflashplayer.so
shows what I entered below though.
Flash version: Shockwave Flash 10.1 r82
Linux Version: CentOS 4.8 (updated via YUM over the years from 4.5). 2.6.9-89.0.25.ELsmp
Firefox Version: 3.0.19-1.el4.centos / 3.0.19
Here is what happens. I currently use LNX 9,0,48,0 flash which worked in the past and still does
for some things like youtube. Most things requiring flash won't display though and ask me to
update. I have updated repeatedly to 10 but one of two things always happens:
1) The flash version still shows LNX 9,0,48,0. This I believe is because I did not have the correct location to put libflashplayer.so, or
2) I try to view something that should work with 10 and I get just a black box. This I assume means the libflashplayer.so is in its
correct location but somehow is causing an error and not being recognized. Trying to view the flash version tells me that I have
to update. If I update through YUM it says it is already installed. Similar problems with other methods.
The method I have tried is download the gz file. The instructions then say to copy the libflashplayer.so to the plugins directory.
I have copied it to /home/chamberl/.mozilla/plugins, /usr/lib/mozilla/plugins, /usr/lib/firefox-3.0.19/plugins, and maybe other places
but I still get the same problems.
If I had to make an educated guess I would guess that flash version 10 is not compatible with CentOS4.* or maybe with the current
version of firefox or both, but I cannot find any compatibility charts. Is this what the problem is, or is it something else?
Also please note when I go back to LNX 9,0,48,0 stuff works again as it did. That is many flash sites work but most tell me to upgrade again.

Hi, I understand what you are saying about no notice, etc. This first appeared with the Service Pack 1 for Win7 and then carried over to the IE9. I hear an update to IE9 is coming so hopefully they will have a notice appear. I'd like to see a "new changes" when the browsers are updated, right along with the instructions to download/Install it.
I'm glad that took care of the problem for you and it wasn't anything more serious:-)
Thanks for marking your thread as answered also.
Regards,
eidnolb

Similar Messages

Satellite L755 - USB Flash Memory is not recognized properly

Hi Sirs
I have (ScanDsik 32GB flash memory) it was working before correctly, but in the last week it was delay to work when I connect it to the laptop Toshiba Satellite L755 and now when I connect it I cannot open it I see it in device manager but cannot open and not recognized correctly the flash memory is working in another computers and laptop normally only in my laptop now not working.
Ive format it in another computers one of them is Toshiba laptop too, I have reinstalling usb driver but same, please could you help me?

Yes I have test another USB sticks one of it Scandisk new did not work too, but another trademark 2GB was working correctly from different mark.

Flash 10.3 not recognized in IE9 on W7x64

System specs
Windows 7 Pro 64bit (not SP1 yet)
Intel I7, Boot drive RAID 0 SSD
Norton Internet Security
MalwareBytes Anti_Malware PRO (no malware found)
Downloaded and installed latest nVidia GT9500 drivers
Problem Details and attempted solutions
Explorer v9.0.8112.16421 32bit
Explorer->Manage Add-ons shows Shockwave Flash Object v10.3.181.14 enabled
Flash player will not display content (Red [X] etc) when visiting sites that have Flash content
GetFlashPlayer link does not open Download Dialog
KillBit: Key existed but value was 0. Deleted key anyway
Tried Explorer->Advanced->Accelerated Graphics->Use software Rendering (both on & off)
Installed Chrome, able to view FLASH content
Tried Uninstall -force, reboot
GetFlashPlayer link STILL does not open Download Dialog
Manual reinstall with same problem
HELP!
ALSO FYI: Forum Posting Problem in IE9
Click Post Message button
Are you sure you want to leave this page?
message from webpage: you have unsaved changes
Leave this page causes error " You can not post a blank message..."
Stay on this page does nothing
Used Chrome to post message

Hi, I understand what you are saying about no notice, etc. This first appeared with the Service Pack 1 for Win7 and then carried over to the IE9. I hear an update to IE9 is coming so hopefully they will have a notice appear. I'd like to see a "new changes" when the browsers are updated, right along with the instructions to download/Install it.
I'm glad that took care of the problem for you and it wasn't anything more serious:-)
Thanks for marking your thread as answered also.
Regards,
eidnolb

Flash installs but not recognized

Flash player successfully downloads and installs but websites subsequently clicked state that Flash Player is not installed. Websites are reputable such as CNN. IE states that Flash is installed and Enabled. Windows 7, IE recent versions, Flash 15. I have reviewed and attempted Adobe's proposed solutions.

http://forums.adobe.com/thread/944238

My flash player is not recognized in Mozilla Firefox. what should i do?

i think i have the version for IE but if i am also using firefox, should i install another version?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Flash 8 Windows Not Recognizing Flash 5 Mac .fla file!!

I have been forced to change computers from Mac to Windows.
My Mac has .fla files created in Flash 5, and I am attempting to
transfer them to my Windows machine (XP Media), where I am using
Flash 8 Professional. My problem: some of the files I created in
Flash 5 on the Mac are transferring to the Windows environment just
fine...and others aren't recognized at all by Flash 8 (and I get an
error from Windows saying it cannot transfer the files because it
"cannot read from the source file or disk", despite their having
been created on exactly the same machine using the same program. I
have to sell this Mac, but now I am afraid to until I can figure
out how to successfully transfer these files. Any suggestions,
anyone?

how are you transferring them? it doesnt sound like a flash
issue as many have been sharing FLA
files cross-platform for years witout issue. There's a chance
the FLAs are corrupt as well.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Pilot Bill wrote:
> I have been forced to change computers from Mac to
Windows. My Mac has .fla
> files created in Flash 5, and I am attempting to
transfer them to my Windows
> machine (XP Media), where I am using Flash 8
Professional. My problem: some of
> the files I created in Flash 5 on the Mac are
transferring to the Windows
> environment just fine...and others aren't recognized at
all by Flash 8 (and I
> get an error from Windows saying it cannot transfer the
files because it
> "cannot read from the source file or disk", despite
their having been created
> on exactly the same machine using the same program. I
have to sell this Mac,
> but now I am afraid to until I can figure out how to
successfully transfer
> these files. Any suggestions, anyone?
>

Flash 8 SWF Not recognized by Newer versions of Players??

Yo.
I know flash 8 is ancient relativly speaking, but SWF exentions should still be recognized by new versions of Flash players am I wrong? Is it a Vista thing? I can't even see where flash player installs to on my hard drive, so I can't browse to link to the program. Anyone fought with this before?

Here is another in the other highspeed port
v195b:
Product ID:   0xb707
Vendor ID:   0x03f0 (Hewlett Packard)
Version:   81.92
Serial Number:    {Private Information Removed}
Speed:   Up to 480 Mb/sec
Manufacturer:   HP
Location ID:   0xfd120000 / 4
Current Available (mA):   500
Current Required (mA):   200
and a third
v195b:
Product ID:   0xb707
Vendor ID:   0x03f0 (Hewlett Packard)
Version:   81.92
Serial Number:    {Private Information Removed}
Speed:   Up to 480 Mb/sec
Manufacturer:   HP
Location ID:   0xfa130000 / 7
Current Available (mA):   500
Current Required (mA):   200

Flash in XP Not recognized content not run

I've got XP SP2 with all updates. I have 1 admin user and 4
limitied users. Limited users get warning Flash not Detected &
to install latest version of Flash at websites. I've got the latest
version, tried uninstalled / reinstalled several times with Adobes
uninstaller, stilll no luck. This seems like a rights or registry
issue. Can any one Help???
Thanks

Hi, I understand what you are saying about no notice, etc. This first appeared with the Service Pack 1 for Win7 and then carried over to the IE9. I hear an update to IE9 is coming so hopefully they will have a notice appear. I'd like to see a "new changes" when the browsers are updated, right along with the instructions to download/Install it.
I'm glad that took care of the problem for you and it wasn't anything more serious:-)
Thanks for marking your thread as answered also.
Regards,
eidnolb

MacBook Air OS X 10.8.5 Flash problem - install not recognized?

Got notice to update flash. Downloaded & installed update this past weekend, apparently successfully. Since then, all sites that use flash have told me it's out of date and I need to download the update! (I have even re-downloaded and re-installed, no change). I use Safari browser.
Help!

Most times, the security issues are Windows related, but there are risks for Mac users too... just not as severe or frequent. Regardless, it's best to update when needed.
The "Clean Install" isn't as tough as it looks. Those steps are written precisely in the order they need to be done, and I wrote them very specifically when it came to detail. IT takes about three minutes start to finish.

I Solved Can't Mount Error/Flashing Orange Light/Not recognized by iTunes!

++IMPORTANT! PLEASE READ THIS ENTIRE POST!++
I solved all of my Ipod shuffle issues and just uploaded 5 albums worth of songs with no problems! Now I am listening to Black Eyed Peas and it might me my imagination, but I think the sound is vastly improved from before. It took me 3 flippin' days to troubleshoot this and solve the problem, probably 6 hours worth of my time. Apple: You guys need to program your hardware to handle anti-virus software, Window's security updates, etc. Too many software conflicts!
Let me first tell you what happened that caused my Ipod to "die". Simply, I built a brand new custom PC to replace my Dell Inspiron laptop. I purchased my shuffle about six months ago and it worked like a charm until I tried plugging it into my new computer's usb port. Then all **** broke loose and the Ipod would not engage. I went here for support and tried updating it with the current updater (1/10/2006 version) to no avail. I uninstalled all the drivers, wiped everything off my Ipod manually, deleted files, made back-up copies of my library, etc. I wiped everything off my system that had anything to do with an iPod. Nothing worked.
THEN, I came across this article posted on Apple. Hopefully it is still up:
http://docs.info.apple.com/article/html?artnum=93716
Follow each and every step. The steps are laid out well, and nothing was missing in terms of a hidden step. If you follow it to the T, you should be able to restore your Ipod to like-new working order.
Some key things to remember:
1. Make sure you empty your recycle bin after deleting all of the iTunes and iPod related files. Then restart your system. Your system caches copies of files associated with iPod. When it see's another version, the two start conflicting with one another, and that causes problems. Deleting your Temp folder is also critical, and this is outlined in one of the steps in the article above.
2. It is VERY IMPORTANT that you exit out of any anti-virus program you have running, including the firewall while you download AND install the iTunes and iPod software. Install the iTunes software first, restart your computer, then install the iPod updater software, Restart again. Do not dismiss this. It is probably the reason why most people's iPod's won't mount and they simple fail to recognize their system even has a firewall running (even Window's firewall).
3. Be patient and follow the instructions. There are five printed pages in this article and it takes about an hour to go through each step, uninstall software, redownload software, install it, etc. After spending 6 hours troubleshooting this, an hour of actually making progress should be easy!
I hope this helps. If you cannot mount your iPod, don't throw it away or go out and buy a new one. I am confident that you will be able to fix your problems and be listening to music on your shuffle soon!
kPod78
Custom PC Windows XP Pro

I tried all this last week, but without success! A whole day, I was looking for a solution, but nothing worked. At least I tried to formate my iPod at another Laptop, but it doesn´t work. (Two weeks ago, I just heard a book from audible. After a short break, the iPod didn´t work no more.)Nice to hear, that you have been succesfull.
alrein
Laptop Benq Windows XP

Flash player is not recognized even though we have the current version

upon clicking on a youtube url we get an error message stating that we need to install the current version of flash in order to play the url. We already have that install and when cut and pasting it into IE it works just fine.

IE uses a different version of Flash (ActiveX) than other browsers use. You need the Plugin version for Firefox.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del = Processes tab}
3. Then run the Flash setup file from your Desktop.

Flash plug-in not recognized in Firefox

I wasn't sure where to put this. I'll be putting it on the Mozilla site as well.
I've installed the Flash 10 plug-in about half a dozen times on my Macbook and I cannot get the web content to work. It appears to install properly, i restart the site and/or reboot the PC and everytime the flash content should come up, it prompts me to install Flash again. It keeps acting like i don't have it installed.
Any help? If this isn't the right discussion, let me know.

Try this one more time. Uninstall FlashPlayer. Install the newest version here.
Repair permissions after the update.

Flash CS3 Debugger not recognizing keyboard input

I am trying to debug a piece of code involving a keystroke.
While debugging, when I hit the key the first time, the breakpoint
is triggered. But after the breakpoint, the debugger simply ignores
any other keystrokes. I'm trying to see what happens when the key
is pressed a second time so you can see why this is frustrating me.
I'm running Flash CS3 on an intel iMac. The program is
written in AS3.
Is this a known issue? Are there any workarounds?
Thanks in advance!
Jeremy

bump

Flash Builder Burrito not recognizing E4X syntax

Hi,
I have a function in a data proxy that assigns XML from a web API to a value object.
private function handleDevNewsDataGetComplete(e:Event):void
          vo.devNewsDataXML = new XML( e.target.data );
          vo.devNewsHeadline = vo.devNewsDataXML..*::Title[0].text();
          vo.devNewsArticle = vo.devNewsDataXML..*::Summary[0].text();
          vo.devNewsSource = vo.devNewsDataXML..*::NewsSource[0].text();
I had no problems with Flash Builder, but since upgrading to Flash Builder Burrito, I have been getting errors (see below). Please help!
Description    Resource    Path    Location    Type
Title cannot be resolved to a type    DeveloperDataProxy.as    Flex Problem
Description    Resource    Path    Location    Type
The variable Summary is undefined    DeveloperDataProxy.as    Flex Problem
Description    Resource    Path    Location    Type
The variable NewsSource is undefined    DeveloperDataProxy.as    Flex Problem

Hi,
Are you using Flash Builder Burrito preview release build?
Do you reproduce this consistently?
The same code compiles fine for us.
Can you please attach your eclipse log file?
Thanks,
Balaji

Why is flash player installation not recognized?

I have been trying for about a week to view items on the internet which require flash player- i get a message that i need to install adobe flash player. So i have gone through the steps to download flash player and google chrome on adobe site. installation completes and messages that is sucessful! i return to the site(s) to view video and i get the same message. when i check the installed programs in control panel adobe flash player 11 active X is on list. Does anyone know what can be the cause of this??

Moving this discussion to the Using Flash Player forum. Are you trying to view the content in Chrome btw?

Flash 10.0 not recognized CentOS

Similar Messages

Maybe you are looking for