Flash 10.3.183.10 msi - multiple installation failures
I started out with version 10.3.183.7 installed, according to the Adobe Flash version site, despite the fact I've attempted to install 10.3.183.10 several times.
When I attempt the install using "install_flash_player_10_active_x.msi," I receive only a "Repair" or "Remove" option, suggesting to me that the installer thinks it's already installed.
I chose "Repair" and got a successful installation message:
However, even after rebooting, the old 7 version remains. I've tried the install with all browsers closed and with them open.
Any suggestions are most appreciated.
Make sure you have the correct MSI downloaded. To double check, download the following ZIP file...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp_10.3.183.10_archive .zip
If this still doesn't work, I would suggest uninstalling and then reinstalling. You can find the uninstaller here...
http://kb2.adobe.com/cps/141/tn_14157.html
Similar Messages
-
Acrobat X pro installation failure
I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.Errors "Exit Code: 6," "Exit Code: 7"
Mylenium -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Adobe Player for Embedding installation failure
Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[ 4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[ 5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[ 5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[ 5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[ 5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[ 4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[ 4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[ 4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[ 4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs... -
Macromedia Flash 8 Video Encoder.msi
While attempting to uninstall Macromedia Flash 8 Video Encoder via the Control Panel, I get an error that the code cannot locate the Macromedia Flash 8 Video Encoder.msi file. I believe this may have been caused by iTunes installing QuickTime so, I have uninstalled both iTunes and QuickTime but I still get the following error message:
Error 1316. A network error occured while attempting to read from the file C:\WINDOWS\Installer\Macromedia Flash 8 Video Encoder.msi
Any expertise is soooooo appreciated. Objective: uninstall Macromedia Flash 8 Video EncoderYou can use the Windows Installer Cleanup Utility (http://majorgeeks.com/download.php?det=4459) to remove the corrupted installation from your computer.
-
App Store consistently fails to update apps - but shows multiple installs
The App Store app on my MBP running OS 10.9.2 consistently fails to install software updates, and shows multiple installations in the Updates "log". I've had to reinstall the OS to get to 10.9.2 after multiple failures (with corresponding entries in App Store Updates and incessant hanging at install), and had to troll around the Apple Support Communities to find a URL for Safari 7.0.3 after it also showed falsely as having updated.
Anyone have an idea about what is going on? Missing good old Software Update.Hi Eskimo Boy,
I have he *EXACT* same issue. I even reinstalled Mavericks completely from scratch and tried TONS of other things.
What I tried so far is (incomplete list):
Set up new user and tried to update => failed.MAS consistently crashes when launched under the new user. => no solution but rather an additional problem => failed.
Tried to update in safe mode => failed.
Tried to reinstall Mavericks => failed.
Tried to reinstall Mavericks and migrate all user data from Time Machine backup => failed.
Tried PRAM reset => failed.
Even tried the highly overrated check permissions => failed.
Whatever I try, I just can't update iBooks from 1.0 to 1.0.1 and Safari from 7.0.2 to 7.0.3. If you have any solution, then please let me know.
Cheers, Paul
P.S.: APPLE! THIS DRIVES ME NUTS! IT DRIVES ME NUTS JUST AS MUCH AS YOUR LOCATION SERVICE NOT WORKING PROBLEM! -
Windows 7 64bit, Firefox,Explorer, Chrome
For the longest time flash player will not install (updates for upgrades).
If I go to the main page I can download the 1mb file then open it up and the installer box opens but never does anything and is just black except the top bar. I can't even close it out. I have to "end task" it. I has been going on for a year or so. I usually have to find a link to the full installer version but can't find it anymore.
Is there a tool to remove all remnants of Adobe flash player?
Link to full installer version of player?
I tried uninstalling all versions but still the same problem
ThanksThe installer works for the vast majority of people. We serve up something like 1.2 billion installs every months, so a failure rate of even 0.0001 is > 100,000 people. We're not seeing that kind of traffic about this issue.
As the installer isn't dependent on Flash Player, and it doesn't leave anything around beyond a log file, it's unlikely that blowing Flash Player completely away would resolve anything, and it sounds like your efforts bear that out. There's something underneath us that's not working right. With Mac, it's usually corrupted NVRAM settings, but I'm not sure what it is on Windows. My guess is that it's related to the graphics subsystem, but it's not something that I've seen happen under lab conditions, and we'd need to debug it to get a definitive answer.
So, I have a couple suggestions in order of least to most effort:
Switch to Google Chrome.
Flash Player is a built-in component, so there's nothing separate to download or maintain. Updates happen automatically as part of the standard Chrome update process, so you never have to touch another Adobe installer if you don't want to.
Scan your hard disk for errors, run the Windows system file checker, and make sure you have the latest graphics drivers for your system
Check your hard disk for errors in Windows 7
Use the System File Checker tool to repair missing or corrupted system files
Back up all of your stuff (ideally to both a disk and an online backup service for redundancy), wipe the machine and do a fresh install of Windows -
Multiple installs of runtime engine?
Are there any problems with multiple installs of LabVIEW 7.0 runtime engine.
That is, if I create an executable application with the runtime engine installer present and distribute it to a person who already has the 7.0 runtime engine installed, does this present any problems? Will the runtime engine actually be installed the second time? Will there be multiple entries in the Windows add/remove list?The installer is designed to work that way. Multiple installs of the same version of the runtime engine should only increment the reference count on the files. When you install your built application you will not see an entry for the runtime engine in the Add/Remove Programs (ARP) list.
If you are familiar with MSI terminology, this behaviour is because the LV RTE that is included in your installer is just the merge module not the MSI. When you install the LV development environment, the RTE is installed from a separate MSI. Because your built app installer will use the merge module, the only way to uninstall the RTE will be by uninstalling your app.
Naren -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
Grub2 multiple installs on same pc
Hi friends, can we have multiple installations of grub2 on the same pc on different partitions ( not the MBR ) ?
For example , I have three partitions:
1) /dev/sda4 (500 MB)
2) /dev/sda5 (500 MB)
3) /dev/sda6 (500 MB)
can i install grub2 on all the above partitions at same time ?
Many thanks.If you install each distro's GRUB2 to the MBR, but each install will overwrite the previous. You can use configfile to boot the other partitions. In arch anyway, you can use grub-install to reinstall arch's GRUB2 to the MBR. AFAIK, this should work with other distros as well. You have to chroot into arch then run grub-install to do this.
https://wiki.archlinux.org/index.php/Change_Root
https://wiki.archlinux.org/index.php/GR … ode_region
See the following Fedora bug report thread for some more info on configfile (particularly comment #23 and #25)..
https://bugzilla.redhat.com/show_bug.cgi?id=872826
It is not recommended to install GRUB2 to a partition... -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Windows 8 installation failure with German language pack
Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information -
Adobe Camera Raw 6.7 Installation Failure
From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
MikePlease confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected] -
I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
I went a step further than before and got itunes running again.
The Updater had also installed Quicktime.
I launched quicktime, it appeared to be configuring and then launched. Then when I run Itunes now it is working...
Hope this is your problem also. -
7.10 installation server, load balancing and multiple installation servers
Hi
In the 7.10 GUI installation server, there is no Load balancing option anamore, also there seems to be no option to easily clone the installation server from within the nwsapsetupadmin.exe program.
If having MANY users at one location, and needing more than one installation server to accomodate the frontend installations, do you need to do this "manually" now ? grouping users and and the logon script directing different user groups to different sapgui installation servers ?
what about creating multiple installation servers easily, is it possible to simply copy the installation server directory (c:\sapinst f.ex.) to another file server, share the directory and configure the DS and IS services (if needed) ??
will configured packages and "on end install" scripts and such be copied too to the new installation server ?
I need to easily create installation servers in 15 countries, this is the reason for my question...Hi Kim Sonny,
hope you're doing fine
Regarding your question:
The "Load Balancing" was more a fail-over service and wasn't intended to use for several locations like in your case.
So the easiest way to do this is to setup one installation server and copy the files to the other servers. On the new Installation servers you only have to setup the service again and that's it.
Cheers,
Martin
Maybe you are looking for
-
Open Adobe Print Form from ALV Int. Rprt using the XSTRING already present
Hello Friends, I have a typicall issue that how to open a Adobe Print Form when a user double clicks in the ALV Report. Here when the user double clicks in the ALV Interactive Report using the unique ID I am getting the Adobe Form from a FTP location
-
How to only allow internet access.
I've got an ASA with two "outside" interfaces and twelve "inside" interfaces. I'd like to separate the Access Lists between outside access and inside access. By default I'd like the inside interfaces access to the internet and nothing else and then b
-
Makepkg and incorrect file extension of the source archive
Hi, I want to create a PKGBUILD for a program distributed as a .tar.gz source archive, except that it's really a .tar archive. Thus, makepkg fails because it uses the wrong tar option. Now I'm wondering what the best way is to deal with this situatio
-
Preferred file type for photos in motion
tying to add motion to photos, friend told me to use tiffs, usually use jpegs (300dpi) for wedding montages, some photos are very small so I have to scale to fit a 1080I video format. 1) Tiff or Jpegs, trying to avoid artifacting 2) Should all color
-
JobScheduling in two WL clusters
Hi, I read following article on using WebLogic Server Clustered Timer: http://blogs.oracle.com/jamesbayer/2009/04/a_simple_job_scheduler_example.html As per this article, the job scheduling would work fine with multiple managed servers in single WL c