Flash 10 install fail after 10.6.2 update. Help please.

It all started after the new 10.6.2 update I did for Snow Leopard
I don't know if this is an something you here at adobe can fix or its something going on at Apple.
Is anyone else having this problem or is it just me?
Opera, and firefox unexpectidy quit as well.
and my wacom drivers are out of wack.
I tryed to uninstall flash player but that too unexpectidly quits.
When I try to restart it gets hung up, and I have to do a hard start to get logged into my computer again.
I ran the disk utility and repaired permissions, that didn't help.
Anyway the install failed said I should contact Adobe so here I am.

Good News I Fixed it.
So what I did was downoad and install the MacOSXUpdCombo10.6.2.dmg
Found here
http://www.apple.com/support/snowleopard/
On the left you will see the downloads, The one you want is the (combo) version.
Just as a precaution, I would recommend backups, as these little glitches are often percursers to the big fail.
I use corbonite, you can search for it on your own, or time machine ect, whatever works best for you.
Sorry I may have been rude, I have always liked Adobe products and I have no doubt that the people at Adobe are working hard to keep everything working, it must be quite hard to deal with irate customers all day.
Hope this helps some people.
Thanks again.

Similar Messages

Iphone wont turn on after ios 7.1 update, help please

Guys, please help me with this problem. After updating it to iOS 7.1 its no longer turning on

Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
Check    if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears,   continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Photoshop acting buggy after 10.6.5 update help please

So after I get a work-around for the bluetooth problem i can't seem to solve, my photoshop is totally screwy. First it's cs4 extended and my macbook pro is 3.06 with 6gb ram. I never had problems before the update and I've done everything you can think of to fix it . Reset pram, power reset, repaired permissions, purged photoshop, reinstalled photoshop, allocated all ram to photoshop, downloaded the fan utility thinking my computer was overheating and adjusted the fans to run cooler, no fix.   etc, etc.
The problem is that when i'm working the screen the main window does not show changes, like when i use the select tool, i get no dancing ants? If i change the gradient I can see the thumbnail on the right change, but the main image does nothing for a very long time... I have to wait like 20 seconds for anything to show on the main screen while I'm moving my mouse around and selecting different tools to see if it's frozen. It's not frozen, but just taking forever to show me anything... I try to select text, but nothing highlights, but if I change the text, it does change, i just can't see it on the main window! Photoshop is all of a sudden taking up 120% of my processing when i have a 6mb file open and nothing else.
Please offer suggestions on what i can do. Disk utility/repair didn't find any errors. all my other program seem to be running fine, just photoshop is screwed up. I don't have any plug-ins. or anything different than before I updated. (well besides my bluetooth not working correctly) this is very frustrating.
Please offer some suggestions, but i've tried everything i could find and nothing seems to work, nor do i seem to have any other problems...
I am about to smash the computer I'm so frustrated.

Tahnks for the reply.
I've switched users, ran onyx , cleared everything, 5 or 6 time. etc, etc. I'm not new to Macs and diagnosing problems, but this is driving me frickin crazy!
Photoshop cs4 11.0.1 does it and even reinstalled 11 does it. I've cleaned up fonts and reverted to my fonts library from june and still problems.
NVIDI GeForce 9400M & NVIDIA GeForce 9600M GT
Model Name:    MacBook Pro
Model Identifier:    MacBookPro5,2
Processor Name:    Intel Core 2 Duo
Processor Speed:    3.06 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    6 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP52.008E.B05
SMC Version (system):    1.42f4
Serial Number (system):    W89371M98YB
Hardware UUID:    66D55B5A-77E8-5D37-9367-823918161A83
Sudden Motion Sensor:
State:    Enabled

After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

Check for new 64 bit software for the modem, other wise you I'll probably have to boot your Mac in 32 bit mode first.. And then every time you want to go online.
I have the Sierra wireless 306 and have their 64 bit lion software installed. Works well.
Best.

My ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

HT5655 I installed Adobe Flash Player 13 - all I get now is "Plug-in Failure" - tried to uninstall fresh install reinstall and still "Plug-in Failure" HELP PLEASE ?

I installed Adobe Flash Player 13 - all I get now is "Plug-in Failure" - tried to uninstall fresh install reinstall and still "Plug-in Failure" HELP PLEASE ?

The currently available Flash v13 is broken, see this thread:
https://discussions.apple.com/thread/6074079?tstart=0
Run the uninstaller as explained above and download an older version:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!

Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.

Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

I bought a iphone 3gs off a family member it says sim not installed to iPhone on iTunes can anyone help please ...?

i bought a iphone 3gs off a family member and its on o2 i activated the o2 sim in a bb because o2 support advised me to activate on different phone as mine will not sync it says sim is not installed to iphone on itunes can anyone help please ...?

cheers for the reply mate yeah she said that its locked to o2 so i done all i mentioned above also spoke to a o2 advisor and he didnt have a clue its stupid i have searched the internet for this problem and cant find a thing i cant be the only person to have it happen lmao its well annoying and stupid if you ask me nothing is simple these days ow well guess i will have to go to the apple store
thanks again mate appriciate it

HT1222 Can't install- box greyed out? Can anyone help, please?

Can't install- box greyed out? Can anyone help, please?

Well, I don't understand this any more than when I posted, but it seems that it's the Animation codec that is the culprit. If I export using DV, there's no problem conforming to 24. Anyone have any ideas why that might be the case?

Compressor fails with Codec not installed error after 10.5.7 update

Problem: Compressor fails on submission to standard codecs such as H.264, Apple Intermediate Codec, Motion JPEG, etc. Codecs do exist on system as playback from QuickTime is unaffected. This is new behavior as of update to OS 10.5.7.
Specs: 17" MackBook Pro, Compressor 3.0.5, QuickTime 7.6, OS X 10.5.7
Attempt to resolve: Tried completely uninstalling Compressor/QMaster and reinstalling from the FCStudio disc as per "Compressor: Troubleshooting basics" (Article: TS1888 - Old Article: 302845). This installed Compressor 3.0 which compressed a single mov then began failing on subsequent submissions. Updated 3.0 to 3.0.5 with no favorable results. Submissions continue to fail.
Any ideas?

From my personal experience, the troubleshooting article which you mention in your original post does not constitute a "full uninstall". There are files missing from that list which are required for a full install.
Using the instructions in the link provided, I've been able to do multiple uninstalls & reinstalls successfully, not only with Compressor & QMaster, but with other Studio apps as well.
However, since there are codecs missing, you may need to do a full uninstall of Final Cut Studio. I personally haven't upgraded to 10.5.7 yet, since I'm currently in the middle of some projects, but it would be worth mentioning that before any kind of software upgrades, all of our system drives get a full backup. This allows us a way to "undo" any bad upgrade.

Crystal Reports ClickOnce install fails after upgrade to run time 13.0.2

I realize this is very similar to two other posts but the ClickOnce failure was not addresses in the two threads I found.
Visual Studio 2010 V 10.0.40219.1 SP1Rel
.NET Framework V 4.0.30319 SP1Rel
Crystal Reports for .NET Framework 4.0 BuildVersion=13.0.2.469.Cortez_CR4VS (from ProductId.txt in the download folder)
Application was original developed using CR BuildVersion=13.0.1.220.Cortez_CR4VS
So since I upgraded this week, if a user clicks the Launch link on the deployment web page the application loads the appl;ication update and starts. Does not even check with Crystal Reports but everything seems to work.
The new version of the Crystal Reports runtime tries to install for users I have that enjoy clicking the run button. The install fails and points at a log file, the key part of which is
Installing using command 'C:\WINDOWS\system32\msiexec.exe' and parameters ' -I "C:\DOCUME1\clyle\LOCALS1\Temp\VSDC8.tmp\Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0_2.msi" -q '
Process exited with code 1603
Status of package 'SAP Crystal Reports Runtime Engine for .NET Framework 4.0' after install is 'InstallFailed'
Uninstalling the previous version manually alleviates the failure as does manually running the msi on the target machine. But that kind of defeats the purpose of ClickOnce. Looking at product.xml that accompanies the runtime download I see it tests for the 13.0.2 version and bypasses the install if it finds it but it does not check for earlier versions.
Another thread I read indicated changing the switches in the install command would work but I am not clear on how to do that from ClickOnce, I cannot locate where the command is being given. Is there a way to get it to test for previous versions and delete them or force an overwrite using the ClickOnce?

Ludek,
Did this issue above every get resolved?
Here is what I have:
ClickOnce, Windows form app that uses Crystal. I upgraded to VS 2012 and Crystal right along
with it.
I only want the 32bit version to install, even on 64bit
machines. I have modified the
product.xml file to allow for this. Also
have some machines with version 13.0.0 and 13.0.1 of the Crystal ClickOnce msi
file. Would like to get everyone up to
13.0.6.
I am doing ALL this testing on clean VMWare installs.
Windows 7 x64 and Windows XP x86.
I force the 32bit install in the product file. (This I believe
is working correctly) And I do a version check, this is where the problem comes
in… Below, from the product file:
<InstallChecks>
    <RegistryCheck
Property="CRRuntime32Version" Key="HKLM\SOFTWARE\SAP
BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports"
Value="CRRuntime32Version" />
</InstallChecks>
Note to path in the registry. This path which is installed
by CR is different for Win7 vs WinXP, not sure why? In Win7 the path is:
HKLM\SOFTWARE\Wow6432Node\SAP
BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports
Also if you have version 13.0.0 installed there is no entry
in the registry for the version number at all!
The log file also show that it can’t find the version if 13.0.0 is
installed.
Admittedly the error log shows that it is somehow finding
the version if it is 13.0.1 (nothing for 13.0.0)? But even though I have it set
to skip the 13.0.6 install if the version check is 13.0.1 or higher Crystal
attempts to install anyway, and it fails in the process, halting the entire
ClickOnce install.
In summary. I need to
be able to check the version currently installed and update it to 13.0.6. This fails and seems to be a bug?   Hopefully there is a work around.
Thanks,
Jim
The product.xml file I have modified is below for review.
<?xml version="1.0" encoding="utf-8" ?>
<Product
xmlns="http://schemas.microsoft.com/developer/2004/01/bootstrapper"
ProductCode="SAP.CrystalReports14.NET.2.0"
>

<PackageFiles>
    <PackageFile Name="CRRuntime_32bit_13_0_6.msi"
      HomeSite="http://downloads.businessobjects.com/akdlm/crnetruntime/clickonce/CRRuntime_32bit_13_0_6.msi"
      PublicKey="30818902818100cbc8f3d8b4bc4db86f150116f4ad7f2fd2d91d29ae6f752c2aa6489cbda10670a0b97b8840d03dd8d082bfb985882b1278504bdd15a1f2a00b629cd70bf26d94b3933a9647a12c819ca67acd1c32ac942e1b824aad4fd8e8a989c45cf4a13770fe2b233f598ea06b62081174be6b7701f347612c126d42c2f9b759ff00164eb30203010001"/>
</PackageFiles>
<RelatedProducts>
    <DependsOnProduct Code="Microsoft.Net.Framework.2.0" />
    <DependsOnProduct Code="Microsoft.Data.Access.Components.2.8" />
</RelatedProducts>
<InstallChecks>
    <RegistryCheck Property="CRRuntime32Version" Key="HKLM\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports" Value="CRRuntime32Version" />
</InstallChecks>
<Commands Reboot="Defer">
    <Command PackageFile="CRRuntime_32bit_13_0_6.msi"
      Arguments=''
      EstimatedInstalledBytes="50000000"
      EstimatedInstallSeconds="220">
      
      <InstallConditions>
        
        
        
        
        <BypassIf Property="CRRuntime32Version" Compare="VersionGreaterThanOrEqualTo" Value="13.0.1"/>
        
        <FailIf Property="AdminUser" Compare="ValueEqualTo" Value="false" String="AdminRequired"/>
        
        <FailIf Property="Version9x" Compare="VersionLessThan" Value="4.10" String="InvalidPlatformWin9x"/>
        
        <FailIf Property="VersionNT" Compare="VersionLessThan" Value="5.00" String="InvalidPlatformWinNT"/>
      </InstallConditions>
      <ExitCodes>
        <ExitCode Value="0" Result="Success"/>
        <ExitCode Value="1641" Result="SuccessReboot"/>
        <ExitCode Value="3010" Result="SuccessReboot"/>
        <DefaultExitCode Result="Fail" FormatMessageFromSystem="true" String="GeneralFailure" />
      </ExitCodes>
    </Command>
</Commands>
</Product>

Adobe Flash Install Fail

My adobe flash install is failing! I have Vista installed on
a E partition. Flash was successfully installed, but only for IE. I
am a big mozilla user, but after trying numerous uninstalls and
installs with the downloaded version, all fail with insufficient
disk space. Log is attached!
Start CustomBrowserList - Date=26/06/2007 (Tuesday)
Time=21:24:41
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: wrote 17920 to
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 797
FindRunningBrowsers
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: wrote 4096 to
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
(overwriteflag=1)
Pop: stack empty
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
(overwriteflag=1)
Pop: stack empty
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
(overwriteflag=1)
Pop: stack empty
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
(overwriteflag=1)
Pop: stack empty
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll"
(overwriteflag=1)
End FindRunningBrowsers
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Jump: 666
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
New install of "Adobe Flash Player Plugin" to
"E:\Windows\system32\Macromed\Flash"
Section: ""
Call: 600
Call: 329
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Jump: 423
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Jump: 470
Delete: "E:\Windows\system32\Macromed\Flash\install.log"
Delete:
DeleteFile("E:\Windows\system32\Macromed\Flash\install.log")
Delete: DeleteFile
failed("E:\Windows\system32\Macromed\Flash\install.log")
settings logging to 1
logging set to 1
Start Main Section - Date=26/06/2007 (Tuesday)
Time=21:24:41
CreateDirectory: "E:\Windows\system32\Macromed\Flash" (1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll"
(overwriteflag=1)
Call: 613
Start Safety Check
Call: 117
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\UserInfo.dll"
File: wrote 4096 to
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\UserInfo.dll"
CheckAdminPermissions Name = John Harleman
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\UserInfo.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\UserInfo.dll"
(overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 151
Call: 151
Call: 75
Jump: 112
GetWindowsVersion - 603
CheckSupportedPlatform - OS=XP
Call: 64
Call: 35
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Jump: 48
Call: 1389
File: overwriteflag=1, allowskipfilesflag=2,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
Call: 1389
File: overwriteflag=1, allowskipfilesflag=0,
name="E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
File: skipped:
"E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll"
(overwriteflag=1)
WriteRegStr:
"HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\FlashPlayer"
"SwfInstall"="6"
MessageBox: 12582960,"You do not have sufficient disk space
to complete this installation.
Please free 5000k and try again."
Delete:
DeleteFile("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\browser_listing.ini")
Delete:
DeleteFile("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll")
Delete: DeleteFile on
Reboot("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\NSISArray.dll")
Delete:
DeleteFile("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\nsProcess.dll")
Delete:
DeleteFile("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\System.dll")
Delete:
DeleteFile("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\UserInfo.dll")
RMDir:
RemoveDirectory("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\")
RMDir: RemoveDirectory on
Reboot("E:\Users\JOHNHA~1\AppData\Local\Temp\nsy9617.tmp\")

what is the exact error message? which version of OS X are you installing the player? also, please state your hardware configuration.

Flash install fails hdutil: attach failed no mountable file systems

I've tried all suggested trouble tips to install the latest Flash 11. Dowload completes but install fails with:
hdutil: attach failed - no mountable file systems.
I have unistalled all prior flash files. Flash works OK in Chrome (it is built in and does not require a plug-in) but can't install using either Safari or Firefox. Same result in each case.

Adobe Flash Player Troubleshooting
Adobe Flash Player Troubleshooting (2)

Issue after kernel panic from update! Please help

Is anyone having issues with their computer after doing the reinstall? I too had the same problem yesterday as thousands of other people had. Took me 9 hours to reinstall lion. I was very happy when I realized I didn't lose all my data. (Guess I learned my lesson on backups) My problem is: Today after my computer is working again is is so stinking slow..... Im talking it has been 15 minutes to load the new mac commercial (30 second ad, on apple.com) In that 15 minutes it has only loaded 20 seconds of it. It is still trying to load the rest so I can stream it? I have never had an issue with speed. It is taking me nearly 4-5 minutes for every email I click just to pull up and read it. Something is wrong? I know it isn't my internet, we have 3 other computers in the house that work the way they always have. My laptop has always been the fastest of them all. I need help! Anyone have any suggestions? Is is possible if the update damaged the flash drive or something? All I know after 9 hours computer loss yesterday and my computer taking all day today to answer a few lousy emails is killing me, I need a solution. I have tried cleared the cache and reset safari with no luck.
Please advise...

HI Chris,
Kernel panics are sometimes causes by hardware issues. Probably a good idea at this point to check the boot disk for errors.
Open Disk Utility, in the Utilities folder in the Applications folder.
Select your disk, and click First Aid.
Click Verify Disk.
If the disk needs repairs, do one of the following:
Insert your Mac OS X Install disc in your computer’s optical drive or an optical drive connected to your computer, and then restart your computer. When you hear the startup tone, hold down the C key until you see the progress indicator, which looks like a spinning gear.
Follow the onscreen instructions until the menu bar appears with the Utilities menu in it, choose Utilities > Disk Utility, click First Aid, and then click Repair Disk.
Checking a hard disk to see if it’s going to fail
You can check the health of your hard disk by checking its Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) status in Disk Utility. Most disk drives include S.M.A.R.T. hardware. Developed by IBM, S.M.A.R.T. hardware allows hard disks to test themselves for potential problems.
Starting up in “safe mode” may help you to diagnose problems you’re having with your computer.
To start up in safe mode:
Shut down your computer and wait 10 seconds.
Press the power button.
Immediately after you hear the startup tone, hold down the Shift key.
You should press the Shift key as soon as possible after your hear the startup tone, but not before.
Release the Shift key when you see the gray Apple logo and progress indicator (spinning gear).
To leave safe mode, restart the computer normally without holding down any keys during startup.
More help here resolving kernel panics; http://www.thexlab.com/faqs/kernelpanics.html
If the boot disk appears to be ok, you could try installing the 10.5.6 combo update available here;
http://support.apple.com/downloads/MacOS_X_10-5-6_ComboUpdate
About the Mac OS 10.5.6 update
Carolyn

Flash 10 install fail after 10.6.2 update. Help please.

Similar Messages

Maybe you are looking for