Flash 10 Won't save settings

Running Vista 64. Latest Flash Player (10) installed. Latest Shockwave (10.0.32.18) installed.
My problem - Trying to play FarmTown game on Facebook using my User account. The game will not load. Tried playing using my Admin account and game loaded.
After reading game help I thought it had something to do with the amount of storage the game is allowed on my computer. SO - in User account I tried changing the Global storage by checking - Allow 3rd party and changing slider to 100 KB, then changing for the individual storage of the website to 1 MB. The settings are not saved.
I checked using my Admin account and the Allow 3rd party is checked.
What is going on? Any help appreciated.

Thank you. 
If you are up for it, you might also want to try the steps outlined in this FAQ.  It basically attempts to fix up the permissions for both registry and folder permissions.  However, with 11.6 working I suspect something else might be to blame.
How do I fix Windows permission problems with Flash Player?
You might also want to give our 11.8 beta build a try to see if that makes a difference.
6/4/2013 - Flash Player 11.8.800.75 Beta

Similar Messages

  • Won't save settings, always starts looking for Proxy and have to change it to no proxy.

    When I start Firefox it is always looking for a proxy. I change it in settings but it won't save it. I have the latest version.

    See:
    * http://kb.mozillazine.org/Preferences_not_saved

  • Linksys WRT54G Wireless-G Router won't save settings

    Hi everyone. I got a stupid little case that's really pissing me off, I'm just trying to port foward with this router, and after I'm done entering all my settings, I click save settings, it tells me settings are succesful.
    But the it goes back to the port forwarding page and all the stuff is at default again as if I did'nt make any changes. What the hell is this?
    please can anyone tell me what I'm doing wrong , I'm sure it's just a little something I don't know about that's making it not save any changes to port fowarding.

    Use a wired computer, open the command prompt ping your router just to make sure that the router is responding. If the same happens do a hard reset on the router for 10 seconds.

  • WRT110 Admin Set Up Won't Save Settings

    So I go to 192.168.1.1 - I change the router name and set the security settings, I click save settings (on each tab separately).  Once I wait the 15 seconds for it to refresh automatically, it goes back to the page and the settings I put in haven't saved.  I've tried resetting the router but that hasn't helped.

    Are you trying to make all this changes on the Router from your Wireless Computer? If its a Wireless Computer, then try to make all this changes from your Wired Computer.
    Delete all the Browsing history of your IE and then try to make the changes on your Router. If still dosent then i think you need to Hard reset your Router and Re-Configure all the settings on it again. Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router...

  • 3rd Party Plug-ins won't save settings on re-open of music project

    When I'm using NI Battery 3 or Omnisphere Plug-ins they won't save the instrument setting upon re-opening my project. I'm not even using a custom setting on the instrument just a standard drum kit or omnisphere setting but when I save and close out of the program and re-open my project it sets omnisphere to the default and battery 3 or massive or whatever 3 party plugin i'm using back to the default setting...
    Help!
    Thanks!

    Have you tried NI support?

  • After FLash, won't save CMOS settings, trys to boot from network

    MS-6712 board, flashed BIOS, now 7/29/03 v1.9, with AMD XP 2500 Barton.
    Win XP, plain old home computer on dialup.
    I flashed BIOS, now it will not let me enter BIOS by pressing DEL key.
    It boot to screen that says "Press to display network boot option
    If you ignore, it says "Try network boot first, then local drives" and goes to a screen CMOS settings wrong. F1 to enter setup, F2 to load defaults"
    If you SHift-Tab, it says press R for RPL, P for PXE, any key to load local drive.
    No matter what you press, it comes to the CMOS Setting wrong screen.
    I flashed BIOS, CTRL-HOME back to old BIOS - same message, so then and back to new one again, etc.  I did a FIXMBR and FIXBOOT in windows XP.  No luck. The problem is that even after setting up BIOS to boot from hard drive, etc, ad save changes and restart, it won't remember the settings.  The battery is also testing at proper volt.  I did just replace bad RAM after upgrading to AMD 2500, but it was fine before I flashed.  PLEASE HELP!!!!  By the way, I can understand technical instructions and PC terms (I think)

    Quote
    F1 to enter setup, F2 to load defaults
    Whell, did you try F1?
    This always happens after you flash/clear the CMOS...

  • Flash won't save or test run my files

    Hi, I guess this might have already been posted before, most
    things I post have....
    When I have copied my fla files over to my laptop so I can
    take work home with me, I can't then test movie, publish or save
    the files.
    How come? I just get this message:
    "Error creating Flash Movie File.
    Be sure the destination file is not reed-only or opened by
    another application. Also, check that the file name is not too
    long."
    None of the files are reed only and it only happens when I
    move them to my laptop.
    I really need to get this work done this weekend but can't if
    they don't run on my laptop.

    Not sure which OS you're using, but if you use Vista or Win7, the first time you launch DW, right-click and run as Administrator.  Set-up your site definition settings, extensions, browsers and other preferences from this elevated mode.
    Hope this helps,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Spreadsheet Services won't save settings

    <p>I'm selecting some settings in the Spreadsheet Services throughTools->Preferences such as styles and color for parent members.But when I logout and login it doesn't save those settings. Is thisa known issue with the tool because I'm sure this doesn't happenwith the regular Essbase Add-In.</p><p> </p><p>Thanks!</p>

    <p>Bump <img src="i/expressions/face-icon-small-wink.gif" border="0"></p>

  • Router won't save settings of Single Port Forward or Port Range Forwarding

    Hi everyone, I'm having a bit of trouble tonight trying to get my Playstation 3 to play games online and in doing so I'm attempting to enable Single Port Forwarding and or Port Range Forwarding.
    To start, I am using this link below this paragraph as a guide.
    http://portforward.com/english/routers/port_forwarding/Cisco/Linksys-E1000/PS3_Endless_Saga.htm
    Each time I go and set the settings and click save, it tells me the settings have been saved successfully then when I click continue onto the next page it shows they actually haven't saved at all. My router is out of it's 90 day phone support with Linksys and I refuse to pay anything extra for support so I'm hoping someone else will be able to help me with my issue since they refuse to unless I pay them.

    Hello. Sucks you ran into trouble just after PSN got back online
    Try clearing your cache / cookies then re-do the settings. Also, try using a different Internet browser.

  • Flash won't save to a network mapped drive

    We upgraded a RAID5 disk array that we map from a network
    share recently. The original disk was 1.8TB the new one is a GPT
    disk that is 3.6TB.
    Now when we try to save files from FLASH CS3 we get errors
    concerning the file or disk is read only, make sure another program
    doesn't have the file open..etc..etc...
    All the permissions on the disk are fine. Photoshop CS3,
    Dreamweaver etc..all play fine with the large GPT disk. Anyone else
    have this problem or know of a solution.
    I know the first release of Encore had this problem even with
    TB drives. If it was over 1,000MB it did the same.
    thanks for any input.
    PS: I have let the adobe updated get all the appropriate
    updates for all products.

    Hi and welcome to Apple Discussions,
    Did you get the flash drive from a reliable source. There are some available on the net that show a large capacity but are only 512 mb. or 1 gb. drives that have been altered to display a much larger capacity.
    Good luck,
    Alan

  • U410 Bios won't save settings to boot from USB

    Hi-
    I'm having some major issues with my system, so I'm trying to boot from a USB into my Windows Recovery disc.
    The only way I'm able to access the BIOS is by going into the machine and disconnecting the CMOS, which forces the BIOS to come up.  I change the boot order to have USB Boot first.  However, when I reboot, it goes into the boot manager (GRUB).
    I've tried it several times, changing the boot order, then saving it, then rebooting - always ends the same way.
     I've seen all the other u410 BIOS-related issues on the forums, but this seems to be fun, slightly different twist to those issues.
    Any help would be appreciated.  I can't really do anything, and I'm stuck in limbo if I can't get it to boot from a USB.
    Thanks.

    nipper wrote:
    Hi-
    I'm having some major issues with my system, so I'm trying to boot from a USB into my Windows Recovery disc.
    The only way I'm able to access the BIOS is by going into the machine and disconnecting the CMOS, which forces the BIOS to come up.  I change the boot order to have USB Boot first.  However, when I reboot, it goes into the boot manager (GRUB).
    I've tried it several times, changing the boot order, then saving it, then rebooting - always ends the same way.
     I've seen all the other u410 BIOS-related issues on the forums, but this seems to be fun, slightly different twist to those issues.
    Any help would be appreciated.  I can't really do anything, and I'm stuck in limbo if I can't get it to boot from a USB.
    Thanks.
    Since you stated GRUB, I'm just curious and I would like to know if you have installed another OS aside from the pre-installed one.
    Thanks in advance.

  • Updated Firefox won't save my preferences; reverts to original settings.

    A few days ago, Firefox updated itself to the 18.0.1 version. Now, each time Firefox updates itself, I tend to lose some of my preferences, those being: opening new tabs as a blank page, tabs being on the bottom, and showing my windows and tabs from last time. Usually, though, once I go and change these things back to the way I like them, they stay like that and I have no further problems.
    However, this time Firefox won't save my preferences. The tabs go back to being on top, the tabs I last closed aren't there, and these tool bars I don't want keep appearing. Instead, three tabs are always there upon opening Firefox: Welcome to Firefox, Mozilla Firefox Start Page, and Yahoo! Toolbar. Also, when opening a new tab, the page says, "page does not exist" or something, and the URL is not even comprehensible, just random letters like someone bashed their head into the keyboard, something like: "jkfui87$^&%$$09."
    I've tried resetting Firefox like it says in the "How to fix preferences that won't save" page, but it didn't help. As for deleting certain files from the profile folder, before I resetted Firefox, I only had "user" and "prefs" and "Invalidprefs" which weren't exactly what that self-helping page asked for so I didn't delete them. After I resetted Firefox I lost the "user" file, but I still have the other two. Should I try deleting them even if they're not exactly like the page describes? They are missing the ".js" part so I haven't felt comfortable messing with them.
    Please give me some advice. I'm tired of having to go change my settings in "about:config" each time I open Firefox. But I really don't want to try anything that would delete my bookmarks or history, as I'm very dependent of them.

    Obviously no one here actually READS these things, I tried all of that even did a clean install, even uninstalled all user data and THE PROBLEM IS STILL THERE!
    Your help is completely useless, All you people do is copy and paste the same thing over and over. If it didn't work the first 20 times it's still not going to work no matter how many times you copy and paste the same fucking link.
    You have lost a die hard fan of Firefox, I am switching to another browser.
    Unfortunately I tried older versions of Firefox and had to go all the way back to Firefox 4 and now the problem is fixed.

  • Watermark source file won't save in settings

    I have successfully created several watermark images that have source files (both in PDF format and JPG format). But there is one that I cannot get to save. I have tried the image in both JPG and PDF formats, but for whatever reason, when I try to save the settings, the source file is not saved and it just comes up as blank text when I select it for use. I have tried over and over again to save this watermark.
    As a result, whenever I want to apply this particular watermark, I have to go and browse for and find the file time and time again.
    ?? Any clue as to why this one won't save? Is there a maximum number of watermarks that can be saved?

    You can look at the place where the settings are saved.
    For Acrobat 8 and MS Vista the place is:
    X:\Users\{user}\AppData\Roaming\Adobe\Acrobat\8.0\Preferences\Watermark

  • Privacy settings won't save in firefox 3.6.3

    Privacy settings won't save. I tried the fixes and still does not save. What do I do to save settings so I don't have to constantly put in preferences? Thanks
    == Operating system ==
    xp

    See http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

  • Settings won't save Yahoo mail after adding second verification?

    My Yahoo email was hacked.   Most of the emails in my Yahoo account were sent a spam mail from my Yahoo account.  
    As advised, I changed my password and added some extra security - a second verification so no one can login to my account without additional security questions or verification code.
    No problem adding email back on my android phone.   But my iPad and I can't figure it out.
    I signed out of yahoo mail on iPad.   Deleted the account in settings.   Verified it was gone.
    Added the account back in settings, or tried to.   I get the message server unavailable.   It won't save the new password.   It won't trigger second verification.
    I went through Safari and I can login to Yahoo mail on Safari.
    I am also able to add the account to the yahoo mail app and use it.   But my iPad is constantly asking for the password.
    I'm hoping someone else has had a similar problem and solved it.   

    I hope I have a self answering question.... Thanks to the "more like this" side bar.
    the problem comes from your second sign-in verification, go to your setting in your yahoo account then go to Edit your account info, then go to Manage your app password a new page come out, go to the Manage your app passwords box and write " my iphone mail" then press generate password, this will give you a long password this password you gonna use it ones in your iphone and ones in your ipad.
    then go to your iphone open setting then go to your emails,contacts, calender. Then press yahoo account and go to your yahoo account information, erase the old password and enter the new long password and done.
    hope work for you guys, did work for me.

Maybe you are looking for