Flash 11.5.1 freezes after typing F9 for actions-window

Hello together,
we've installed Creative Suite 5.5 Production Premium on a Samsung P560 Notebook under Windows Vista Business 32Bit. The installation routine finished succesfully and we were able to start flash. There we can use nearly everything but the action-window. As soon as we type F9 or choose Window -> Actions F9 the program starts to work until it gives no feedback. We've already updated CS5.5 with all available patches. The Nvidia-Driver for the GeForce9600M GS graphics card was also updated. Has anyone an idee what could provoke this behaviour? Further more it would be interesting if there are logs in which the application could write occuring failurs?
Thanks a lot and with best regards
David

Please post in the Flash forum. This forum is for suite specific issues only.
Bob

Similar Messages

Keyboard and trackpad freeze after being idle for a few minutes

I have a early 2008 MBP and just today the keyboard and trackpad freeze after not using it for a few minutes. I was at work when it happened. I plugged it in and started doing something else and a few minutes later came back and i couldn't move the mouse or do anything with the keyboard, but processes were still running. For example, I have a fan speed app that sits in the toolbar, and it was still showing current fan speed. So I restarted it, and it did it again. So the next time it happened, I closed the lid and opened it up and it fixed it. It's happened several times now after a few minutes of non use and I just close the lid and it fixes it. Also, there was a period when I was using my computer for a couple of hours non stop and it didn't have a problem. Only when I'm not touching the keyboard or trackpad does it do it. since this keeps happening i have verified the disk in disk utility, done a hardware reset with cmd+opt+p+r, ran through system profiler to see if there were any problems with no results, and it still does it. Anyone have any ideas?
It should be noted that not only does the battery not work for more than about 2 minutes, the left I/O board appears to be dying. The power chord takes a considerable amount of wiggling and adjusting before it finds a place where it will actually charge. The audio out and the USB on that side are the same way. So I am aware of that problem. Also, I have had to take out the right side fan multiple times and disassemble and oil the bearing because it's going bad, which requires taking the top plate off, but I haven't had to do that for over 6 months. In my mind if the problem was caused by taking the top plate off, that would fry the entire top plate, which happened once when a technitian at a local company took the computer apart for a waranty repair. All of these problems considered, I don't think they would have anything to do with the fact that the mouse and keyboard suddenly won't work after about 5-10 minutes of sitting idle. I have done nothing different since yesterday that would explain why it does this.
Also, I can't do anything with the install disk because the CD drive is dead. But that's mostly because it was a piece of garbage to begin with.
Any Ideas would be helpful.

After doing some more digging I was watching processes in Activity Monitor to see if I could see what process is failing. I think the problem with with Chrome. It only happened when Chrome was open. And since then I reinstalled it and the problem has so far gone away. So, I think the problems is solved.

[SOLVED] Getting freezes after using dwm for some time and exiting it

Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)

I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]---

Flash drive no longer works after being connected to a Windows XP machine.

After being opened on a Windows XP machine, the contents of my flash drive now shows up on my Macbook pro as a single .lnk file. What happened? It's MS-DOS (FAT32).
Is there any way out of this or has all my data been lost? I've never experienced this issue previously.

Thanks. I've now scanned it with both Sophos and ClamXav and both have come up negative for infection.
At least while the scan was running I could see that all my data is still there as the name of each file appeared as it was going through the scan.
My efforts to sort this out seem to have made things worse as now it opens up word whenever I try to see the contents. I'll try it on a PC tomorrow and see if I can figure out what happened. Looks like the file system has been damaged in some way.

Laptop freezes after typing in password at log in screen

I recently purchased a Dell Inspiron 5040 laptop model 115N-28180, and after I type in my password it freezes on the welcome screen and will not move from there.
Sometimes it only gives me a blank black screen when I reboot it. I can get into the desktop in safe mode without any problems, and have also ran the f12 repair and no problems showed up. I also tried holding down the power button with the battery out and only using the AC adapter for power. I changed user accounts and deleted the old one thinking there may be a problem there but that still didnt work. If anyone can help I would greatly appreciate it!!!!

Do you have a shell initialization script for this remote account?
Does this shell initialization script echo/print anything to standard out? If so, this can totally screw up sftp or scp connections.
Shell initialization files could be one of the following:
.bash_profile
.bash_login
.profile
.bashrc
This assumes 'bash' is your shell (the Mac OS X deftaul). If you have a different shell, the shell initialization file names would different.
If you are using 'bash', try adding the following to the beginning of any 'bash' shell initialization script you are using
[[ ${-#*i} = ${-} ]] && return
This will stop the bash shell initialization script from running when you are not doing an interactive login, such as sftp or scp.

My Macbook freezes after using it for awhile

I startup my MacBook (aluminum 2008 verions) running lion 10.7.1 and after about 5 minutes of using it, my computer displays the rainbow cursor and freezes. I am unable to click on anything or force quit.
My processor is 2.4 Ghz and has 2Gb ram.
It would be great if someone could give me any thoughts ASAP as I have an assignment due next week and need my computer.
Thanks in advance

Your problem is caused by third-party software that you installed. I'd need more information to be more specific.
Reboot as usual (not in safe mode) if you haven't already done so. Launch the Terminal application, copy or drag -- do not type -- the line of text below into the window, and press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Next, do the same thing with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
That's one line, not two. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Next, this command:
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Again, one line. Finally, one more:
ls -1 /Library/{InputManagers,StartupItems}
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Automator bugs: freezing after Take Video Snapshot action

Hi there-
Just testing out some of my automator workflows, and it seems that some basic (built-in) automator actions no longer function under Mountain Lion.
Running the action "Take Video Snapshot" pops up a mini window that can take a user's photo. Running the action causes Automator to hang immediately after the action attempts to save the image.
Modifying the action's settings has no effect- take photo automatically drives automator right into freezing once the photo is snapped. Manually taking the photo causes the freeze to happen right when the user clicks 'Done'
Could someone please re-create and verify that this isn't isolated to my machine? I'd super appreciate it.
Getting frustrated with Automator since Lion- they keep breaking more and more Automator actions with each OS update, it seems.

Having the same issue. I tried to get around it by tethering a camera in automator and using the 'Take Picture' action. But then you get a different error if you try to use the action more than once:
Cannot update for observer <AMWorkflow 0x4001d9c20> for the key path "parameters.name" from <TakePicture 0x401042700>, most likely because the value for the key "parameters" has changed without an appropriate KVO notification being sent. Check the KVO-compliance of the TakePicture class.
Called apple because these support threads seem to take forever, they directed me to https://developer.apple.com (after asking what manufacturer I got the program from...uh, you?). I have seen a lot of posts with the tethering error, not so many with our 'Take Video Snapshot' error, but I assure you that it is not unique to your computer!
Hope they catch autmator up with the new OS, not everyone uses it but those who do REALLY use it.

Itunes freezes after checking playlist for burn

Every time I try to burn a CD the itunes freezes. I create a playlist and put in a blank CD and hit the burn button, itunes checks the playlist gets to the end and the burn button stops flashing and itunes is frozen. How do I fix this I have run CD diagnostic and have repaired itunes. It has just recently started doing this.

Kelly.
1. Do you still get the problem if you put the blank CD in before you start the burn in iTunes and let it "settle" in the system?
2. I need more information about your hardware configuration. If you haven't already, go get iTunes 6.0 and install it. Run the iTunes Help menu -> Run CD Diagnostics... command and post the results here.

After CTRL+N for new window, bookmarks toolbar disappears on the new window

When I already have a fully, correctly functioning window with tabs running, with the Bookmarks Toolbar visible, and then I use CTRL+N to open a new window, the 2nd window does not show the Bookmarks Toolbar.
When I go to View > ToolBars, the Bookmarks Toolbar show a check. It is not there in the new window, but it in the first window. Seems like a glitch caused by CTRL+N?
This is repeatable, and has happened many times. I have 12.0 but this happened with other Firefox versions as well.

hello, can you replicate the same behaviour when you're running firefox in safe mode? it might be one of the addons interfering...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Windows XP SP3 Freezes After Installation of Nvidia Quadro FX3000

Greetings to all! I have an older Dell running Windows XP SP3. It had an Nvidia Quadro FX1000 which began going bad and I replaced with a Quadro FX3000 model. The drivers I downloaded from Nvidia's web site were the most recent qualified
drivers (yep, they were old, but still the correct drivers). After of the installation of the card and the drivers Windows boots normally to the logon screen. After typing in my password Windows tells me its loading my personal settings, then freezes
with no further activity. I'm unable to use the mouse at that point and can't shut down gracefully.
I can boot successfully into Windows via Safe Mode and log on using my password. However, the system always hangs after logging on when I just boot straight into Windows without using safe mode.
Can anyone weigh in with a possible reason for this to occur. It's driving me crazy. I'm sure the answer is right in front of me, I'm just not seeing it.
Thanks in advance!

Hi!
I know its almost a month since you posted, but I would boot in to safe mode, remove the display drivers and install an older version of the driver. For instance the driver that was released before the latest one.
This has done the trick for me a few times with other hardware!
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

When using rogers.yahoo mail, I need to refresh my screen after every 2-3 actions.

While using Rogers.yahoo mail in FireFox, the screen freezes after every 2-3 actions (read email, delete email, respond to email, move email to folder etc.). I have to refresh the screen and then it goes along for another 2-3 actions and I have to refresh again. Very frustrating. I opened the same email account in Google Chrome and IE and it works fine there. This started happening yesterday.
In perhaps an unrelated thing, I get this error message every day, once, when I start up my PC for the past 2 months:
Microsoft.NET Framework
Unhanded exception has occurred in your application If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. Unable to load DLL 'hppatusg01.dll': The specified module could not be found (Exception from HRESULT:0x8007007E)

No problem.
If the above does not fix the issue, '''try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Flash-Based BBC h264 Videos Freeze After 8 Seconds

Hello,
I like to view BBC news videos since March on my new Desktop Windows 7 64 bit Pro system. For about 2 weeks now, I've been having trouble viewing about half of these videos. Half play all the way through fine and the other half freeze after 8-10 seconds. I have a CAT 5e 7 mbit cable modem connection so speed is not an issue. My Wi-Fi connected Windows 7 Home Premium laptop uses the same router and can play the same videos with no problems.
On my Desktop, this freezing happens on both FireFox 12 and Internet Explorer 9. I did all the usual things to try to fix the problem. I cleared the caches on both FF12 and IE9. Yesterday, I uninstalled both the Adobe Flash FF12 plug-in and IE9 Active-X versions and reinstalled with the latest version, 11,3,300,262. Today, I upgraded to the latest version, 11,3,300,265. Nothing has solved the problem.
Here are the specs for the BBC Flash-based player:
Problem Videos:
URL: http://www.bbc.co.uk/news/uk-northern-ireland-18819815
EMP v.3.1.0.r749603_749269_749444_5
18819815 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-middle-east-18733664
EMP v.3.1.0.r749603_749269_749444_5
18733664 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-asia-china-18818139
EMP v.3.1.0.r749603_749269_749444_5
18818139 | 800kbps | h264 | AK 4.5 (1) | 640x360
This video plays OK:
URL: http://www.bbc.co.uk/news/world-us-canada-18801596
EMP v.3.1.0.r749603_749269_749444_5
18801601 | 800kbps | h264 | AK 4.5 (1) | 640x360
The only difference I noticed was the initial screen size of the video. On the problem videos, the size is bigger than the OK one. I assume the BBC videos are h264 encoded. On both my Desktop and my laptop, I have 2 msmpeg2vdec.dll files. 1 in C:\Windows\System32 and another in C:\Windows\SysWOW64. They are both v6.1.7140.0. On both my Desktop and laptop, the sizes are different, 2.52 MB & 2.03 MB.
I am using the latest nVidia driver v301.42 which I installed 5/30/2012, over a month ago. The only recent change which happened to my system on 7/4/2012 was my Norton Internet Security 2012 subscription expired. NIS2012 then disabled itself and activated the built-in Windows firewall. 3 days ago I uninstalled NIS2012. I also used the Norton Removal Tool. I then installed a new NIS2012 with a new legitimate key. However, I am still getting this freezing and I don't remember if I got this freezing before 7/4/2012.
On both FF12 and IE9, I can play Hulu, YouTube, Yahoo!, and Amazon videos with no problems. When you right-click on any of these other flash players, nowhere does it say "h264."
My questions are:
1) does the Adobe Flash Player, for both the FF12 plug-in and IE9 ax players, use the Windows7 CODEC?
2) Which file is the h264 CODEC, is it msmpeg2vdec.dll or something else?
3) Will installing a new CODEC pack fix this problem?
4) Is there anything else I have overlooked? Is there anything else I can do to fix this problem?
Thanks.

Interestingly, the advertisement plays correctly. When you right-click on the ad, it does not say h264. I have 2 video cards and several monitors on my Desktop. It might have something to do with that. Otherwise, perhaps one of my other apps did something to the Flash Player h264 playback.
I'm thinking maybe if I upgraded the h264 CODEC, maybe it will play correctly again. CODEC GUIDE has a codec package which I already downloaded but haven't installed yet. I downloaded the "Basic." Unless you really need to, I don't recommend anyone install it. If you want to install a CODEC package, just install the "Basic" package and not one of the bigger packages. I think they make changes to your system. Before installing it, be sure to make a full backup of your Windows system.
http://www.codecguide.com/download_kl.htm

Flash freeze after hibernate Windows 7

My flash in firefox always freeze/crash after I hibernate my computer. I noticed this problem on my 3 computers I have, and it happens everytime I hibernate. Here is the procedure, I watch a youtube clip, hibernate your computer but DO NOT close firefox. After awke from hibernate, I tried start watching another youtube video. And just within 15 seconds, you will notice the whole firefox freezed. Currently, the only solution is to manually kill plugin-container.exe from your task manager. I am pretty sure the problem is flash not firefox, because after awake from hibernate, if I only browser pages without flash, it will not freeze. Firefox only freeze until I start watching youtube, or go on any site contains flash. This problem has been there for many years, is Adobe even realized the problem? Any solution?
All my setups are the newest:
Windows 7 64-bit, full upgraded as of today
Firefox 10.0 (problem happened on 9.0 also)
Flash 11.1.102.55

Hi cpthk,
Thanks for the report. I just tried this out on two different desktop Windows 7 64 bit systems (same version of Firefox and Flash Player) but couldn't reproduce the problem. I tried both hybrid sleep and hibernation, but in all tests YouTube videos (along with other flash videos) continued to work in Firefox after bringing the computer back online.
You mention that this occurs with all three of your computers. Are there any hardware similarities between them? I'd like to get additional information from you, would you mind taking a look at the following FAQ which details what we'll need and where to report this issue?
How do I report a Flash Player crash to Adobe?
I'd like to recommend anyone else who is locking up, specifically after coming back from hibernation (or sleep) to post back on this thread so I can get a feel for how common this is.
Thanks,
Chris

Flash Player freezes after a few seconds of playing

Adobe Flash Player freezes after playing for a few seconds.
It does this in both Mozilla Firefox and in Google Chrome.
It does this regardless of how much of the file has been buffered
(it's not just pausing and waiting for buffer)
I have the latest version of Adobe Flash Player installed.
I have the latest version of Mozilla Firefox installed.
I have the latest version of Google Chrome installed.
I've tried uninstalling and reinstalling Adobe Flash Player.
I've tried disabling hardware accelleration.
I've tried increasing the buffer size.
I've tried setting the buffer to 0
I've tried clearing the appdata cache

fourstrings411,
Could you give our 11.4 beta release a try to see if that resolves the playback problem? If it does not, please see this FAQ for other possible solutions. In particular, look towards the bottom for instructions on rolling back versions or disabling protected mode.
How do I troubleshoot Flash Player's protected mode for Firefox?
Thanks,
Chris

After installing 10.9.4 computer freezes after sleep

After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
      1% WindowServer
      1% fontd
      1% CrashPlan menu bar
      0% Fitbit Connect Menubar Helper
      0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Flash 11.5.1 freezes after typing F9 for actions-window

Similar Messages

Maybe you are looking for