Flash 64-bit Beta stalling?

I tried loading the Flash 64-bit Beta version on my MacBook Core 2 Duo 2.2. It seems to work and doesn't necessarily hang forever. However, there are certain pages (especially one particular local newspaper site) where it just stalls for 10-15 seconds. I see a blank spot on these pages where the Flash content is supposed to be until it finally completes. When it's out of the stall, it seems to work pretty well.
It's gotten to the point where it was too annoying and I uninstalled it and reinstalled the 32-bit version. It seems to be working fine now.
Is this something that might be unique to my setup or perhaps to the websites I visit? Right now I figure I'll pass on the current Beta version and will try it again once they have a more stable version.

I don't think you are unique if one additional data point is a valid basis I was using the 11 betas up until the US Open Tennis. Then while watching the Open on espn3.com the live feed would fail (loose the feed in a way I never saw before). Put back 10 and that stopped happening. That is the only basis I have for my experience with the 11's failing if that is any help.

Similar Messages

Why has installing Flash Player 11 Beta 64-bit affected downloading of "pdf" documents??

I recently installed Flash Player 11 Beta 64-bit, and Active-x for Windows 64-bit – for Internet Explorer only.
The downloading of xxx.pdf documents was immediately affected. The downloading was “garbage” into a Microsoft Word document with the suffix .pdf. Help!
Op System: Vista; Explorer 9.0.8112.16421 64 bit version

Our installer would not have any affect on how pdf files are registered in the system The best think to do is make sure the default program association with pdf files is Acrobat Reader. IE should pick up on those settings.

Adobe Flash Player 11 Beta for desktops now available

Now available on labs.adobe.com! Been waiting to try the new 64-bit plugin? Want to check out what all the 3D/Molehill talk is about? Give the beta a try and let us know how it works for you!
Stage3D APIs — Create highly interactive visuals to improve collaboration on 3-dimensional models.
64-bit support — Support for 64-bit operating systems and browsers on Linux, Mac OS, and Windows.
G.711 audio compression for telephony — Integrate voice/telephony into business apps using G.711 codec.
H.264/AVC SW Encoding — Encode higher quality video locally using H.264 video.
Socket Progress Events — Build advanced file sharing apps like FTP clients that send large amounts of data.
HD surround sound — Deliver full HD videos with 7.1 channel surround sound directly to AIR powered TVs.'
Check out the full summary of features available for Flash Player 11.
Download Page

For anyone trying the Flash Player 11 beta...
Please note: any earlier FP versions should be uninstalled before running the FP 11 installer.
See http://forums.adobe.com/message/3797989#3797989

My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
also i noted that it has only been doing this since quite recently, before it was fine
please help!

First, back up all data immediately, as your boot drive might be failing.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How to update Flash Builder 4 beta 2 so that it remains compatible with snapshots?

I have Flash Builder 4 beta 2 STANDALONE installed on my Mac (MacOSX 10.6) and I just upgraded my Flex SDK to the latest stable snapshot (4.0.0.13875). Now it seems that the visual designer is not very happy with this upgrade.
And in "Using Gumbo builds with Flex Builder" (http://opensource.adobe.com/wiki/display/flexsdk/Using+Gumbo+Builds+in+Flex+Builder) it is said that "Please note that the release of a milestone build will usually have an associated automatic update to Flex Builder that will include all relevant files."
The question is how do I get that automatic update? I've tried Help/Software Updates/Find and install.../Updates for existing features, but it didn't find any updates. Any idea how I can revive my Design mode?

There are no updates for Beta 2.
You're probably seeing one of two issues with the latest nightly build:
1) playerglobal.swc change http://forums.adobe.com/thread/559312?tstart=0
2) Namespace change from xmlns:mx="library://ns.adobe.com/flex/halo" to xmlns:mx="library://ns.adobe.com/flex/mx"
Jason San Jose
Quality Engineer, Flash Builder

Adobe Flash Player 11 Beta

For anyone having system lock up issues due to Safari not responding or locking up. It may be due to Adobe Flash Player. The Adobe Flash Player 11 beta may be your answer. I have been using this beta for the past 2 days and have not had the random lockups, high CPU usage and heat related issues from high CPU temperatures when Safari would stop responding locking up my system.
Hopefully, this may help others with similar or same experience. The Mac OS X 32bit and 64bit installers are the same.

Answering this.

Flash Builder 4 Beta 2 ---- Data Management Problem

Flash Builder 4 Beta 2 ---- Data Management Problem
I have a simple datagrid, a PHP service and a MySQL database. When I run the code I get multiple(7) records returned to the datagrid. Once I enable Data Management and run the exact same code, I only get 1 record returned.
Is there a setting in Data Management that affects the number of records returned?
Here is the MXML code I am testing.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                     xmlns:s="library://ns.adobe.com/flex/spark"
                     xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" xmlns:carasgndataphp="services.carasgndataphp.*">
      <fx:Script>
            <![CDATA[
                  import mx.controls.Alert;
                  import mx.events.FlexEvent;
                  var inptdata:String = "1";
                  protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
                        getAsgnDataResult.token = carAsgnDataPHP.getAsgnData(inptdata);
            ]]>
      </fx:Script>
      <fx:Declarations>
            <s:CallResponder id="getAsgnDataResult"/>
            <carasgndataphp:CarAsgnDataPHP id="carAsgnDataPHP" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
            
      </fx:Declarations>
      <mx:DataGrid x="115" y="91" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAsgnDataResult.lastResult}" width="558" height="298">
            <mx:columns>
                  <mx:DataGridColumn headerText="A" dataField="numAsgn"/>
                  <mx:DataGridColumn headerText="T" dataField="numTopic"/>
                  <mx:DataGridColumn headerText="U" dataField="numUnit"/>
                  <mx:DataGridColumn headerText="P" dataField="numProblem"/>
                  <mx:DataGridColumn headerText="TP" dataField="PType"/>
                  <mx:DataGridColumn headerText="P" dataField="numSeqPresent"/>
                  <mx:DataGridColumn headerText="F" dataField="numSeqFeedback"/>
                  <mx:DataGridColumn headerText="D" dataField="numDelay"/>
                  <mx:DataGridColumn headerText="ID" dataField="idAsgnData"/>
                  <mx:DataGridColumn headerText="IDP" dataField="idProblem"/>
            </mx:columns>
      </mx:DataGrid>
</s:Application>

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Flash Builder 4 beta 2, Managed objects and IUID

Hey Everyone,
I just installed Flash Builder 4 beta 2, I am getting compiler errors now on my managed data service classes that implement IUID:
[Managed]
public class Foo implements IUID {
private var uid:String;
public function set uid(value:String):void {
this.uid=value;
The compile error is on the above setter and says: [Managed] requires 'uid' to be of type 'String' , not sure what I am doing wrong here, and this was working on beta 1, any ideas?
Thanks.

Did you try a full clean and build? Also try a new test app to reduce the number of possibilities.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Flash Builder 4 Beta RDS issue

I cannot connect to ColdFusion via RDS with my Flash Builder 4 beta 2. I have no issue connecting to CF via RDS in dreamweaver CS3.
However whenever I try to connect to a CFC via "connect to DataService" and I get "Enter RDS password and user name".. I always get "Authentication faliure. The supplied username or password may be wrong". I created 2 users for RDS in the CF 9 adminstrato.. and it would not accept either username/ password combo. I even tried using RDS with no authentication and rebooted the pc each time.
I had no issue doing a very basic connection to a cfc like in the HelloCF example.. yet db connectivity fails.. idea of whats' the issue here?
Thanks!

Hi,
Can you access your CFC from the browser?
i mean like http://localhost:8501/MyCFC.cfc in the browser would open something like:
http://localhost:8501/CFIDE/componentutils/cfcexplorer.cfc?METHOD=getcfcinhtml&PATH=/MyCFC .cfc&NAME=MyCFC.cfc
Now replace METHOD=getcfcinhtml to METHOD=getcfcmetadata.
If this displays some text as the result like:
'C:\ColdFusion8\wwwroot\WEB-INF\cftags\component.cfccomponentWEB-INF.cftags.componentWEB-INF.cftags.componentC:\ColdFusion8\wwwroot\MyCFC.cfcAT_TestcasesFiles.LogicTesting.BookServiceTestAT_TestcasesFiles.LogicTesting.BookServiceTestnoBookgetItemremoteanytrueitemcomponent'
If this itself throws an error, then you would be hitting
http://bugs.adobe.com/jira/browse/FB-23626 , which showed up authentication error though CFC had problems.
This has been resolved in the latest pre-release build.
If you do not have access for the pre-release build please send a mail to rkrishna AT adobe DOT com.
Hope this helps please let us know if you still face issues.
Thanks,
Balaji
http://balajisridhar.wordpress.com

Flash Builder 4 Beta Annoying - Keep imports organized - default feature - fix

I Began using Adobe's Flash Builder 4 Beta and started coding Actionscript code; I imported classes and at time intervals, Flash Builder 4 beta deleted my unused imported classes. It was really annoying since I imported all of the classes I need in the project. I think that the Flash Builder 4 should have this option turned off by default. I searched around the internet and found this to fix it. GO TO: Window -> Preferences -> Flash Builder -> Editors -> Actionscript Code. Uncheck "keep imports organized". See the image below. Hope it helps someone.

Hi Pat
That is the "Mark Occurances" feature. Click into the editor window, then on your toolbar you should see the "Mark Occurances" button, looks like the tip of a yellow highlighter. Toggle it off and that goes away. Obviously something some folks like on, others hate, but since you can toggle it shouldn't be a big deal.
Sincerely
Mark R. Jonkman

Firefox 64 bit and flash 32 bit chroot

Since two days im trying to get 32 bit flash plugin to work with firefox 64 bit using chroot enviroment. I followed those instructions on archwiki http://wiki.archlinux.org/index.php/Ins … _in_Arch64 but theres only solution for both firefox and flash 32 bit.
Any ideas how to do this?

- Go to Flash10 x86_64.
- Download file at bottom.
- Decompress it.
- Copy ".so" file over ~/.mozilla/plugins folder.
- Restart firefox...
I suggest evryone just avoid mixing 64bits and 32bits... unless impossible (ie. wine64 doesn't run win32 apps, just win64 ones)
EDIT: Oh, about your "real" question: maybe you were looking for "ndispluginwrapper" (or something alike)
EDIT2: I forgot to mention you should read some literacy about "what is a chroot and what is its purpouse"....
Last edited by franzrogar (2010-04-11 21:19:31)

***URGENT*** - Problem Installing Flash Builder 4 beta

Hi folks,
I'm really having a trouble with Installing FLASH BUILDER 4 beta on my WinXP SP2, 1.5 Ghz processor, 256 Mb RAM, 1.12 GB free on C drive, 1.26 GB free on H:drive, and 1 GB free on D drive.
But still i'm getting this prompt by Installer files I dowloaded from Adobe Labs for Flash Builder 4 beta.
Do i need more Hard Drive space ?
I have attached the jpeg image of the prompt.
Please Help me with this. I have a client with a project to build on Flash Builder 4 beta & only got 3 days to deliver.
thanks in advance.
regards
Ronny Depp

Firstly, are you serious ?
virtually no hard disk space(the install files need to extract with enough space to actually then install the software)
virtually no ram 256mb is barely enough for windows XP to start up. How are you going to run Flashbuilder
1.5ghz cpu - hmmm I don't think flashbuilder will run on a pda....
delivering a project in 3 days with beta software that you are obviously unfamiliar with...sounds almost like a mastercard ad
$100 for a cpu, $100 for some ram, $100 for some hard disk, look on the clients face when he saw the result- priceless...
hate to take the mickey, but I couldnt let something like this slide by it was just to easy
David.

Changes from Flash Builder 4 Beta 2 to Flash Builder 4 Premium

I have a Flex app that started in Flash Builder 4 Beta 2 and when the beta expired, we bought Flash Builder 4 Premium.
Before, when programmatically changing the selected index of a Spark DropDownList, the change handler was called, so in cases where I didn't want that to happen, I had to remove the event listener and add it again after a small setTimeout.
In the new version, it seems that when I change the selected index programmatically, the change handler is not called, so if I want it to be called, I have to call it manually, which is also fine. I just want to confirm that this different behavior was an actual change that was made and isn't caused by some kind of other change I made to my code.
Is there a list of feature changes from the beta to the release version? Thanks!
-Travis

If you right-click the toolbar you can get to the 'Customize perspective' dialog.
From there make sure commands >> flash run/debug option is checked.
Oddly, there is no "Flash run/debug" option to check.
Please see the attached picture.
Note that I am running Flash Builder Beta 2 (build 253292) on Eclipse 3.4.2 (build M20090211-1700) on Max OS X (version 10.5.8).
Thanks!
--- Jim

(Urgent!) Uninstalling Flash Builder 4 Beta 2

Hi,
I'm having problems uninstalling Flash Builder 4 Beta 2. There is no uninstall app in the Flash Builder folder for some reason.
If I remove to the Trash and try installling and running the new Trial version, it gives me the error "An error has occurred. See the log file..". The contents of the log file are : "!SESSION !SESSION " ??
Is there anyway to remove the previous version manually?
Some details on my setup :
OSX 10.5.8.
I think Java 1.6..
But this might a problem as when i try to launch OSX Java Preferences it gives me the error "Cannot launch Java application, java.lang.NullPointerException".
I'm pretty stuck and can't get either to to work ( The old Beta 2 version gives me a Flex Licence error ). I just need to get the new trial insalled so I can upgrade completely.
Any help would be much appreciated.
Thanks
Jamie

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Upgrade from Flash Builder 4 Beta 2 to Flash Builder 4 Premium

Hi guys,
How do i just upgrade from Beta 2 to premium? Does the install utility for Premium take care of it? or do I need to some how uninstall and install Flash Builder 4 premium? I currently have Flash Builder 4 Beta 2 installed as a plugin to my current Eclipse IDE, and I do not want to start all over again as there are quite of few settings/plugins already installed in Eclipse that I want to keep, and not waste more time duplicating the whole process.
Thanks
Jay

If you right-click the toolbar you can get to the 'Customize perspective' dialog.
From there make sure commands >> flash run/debug option is checked.
Oddly, there is no "Flash run/debug" option to check.
Please see the attached picture.
Note that I am running Flash Builder Beta 2 (build 253292) on Eclipse 3.4.2 (build M20090211-1700) on Max OS X (version 10.5.8).
Thanks!
--- Jim

Flash 64-bit Beta stalling?

Similar Messages

Maybe you are looking for