Flash 8.5 Beta fixed my problems

I'm running 10.4.6 on G4 Powerbook 1.25 and Safari started
randomly not playing any flash movies version 7 or 8. I uninstalled
the plugin using the unistaller from Macromedia then installed
Flash plugin 8.5 (beta) and no problems here. It fixed my flash
viewing problems. It also works in Firefox & Camino.

Where did you get the beta? Does it work on 64-bit
processors?

Similar Messages

Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

Oops, something is not right... Flash Plug-In Warning Explanation: You do not have the Flash player installed on your browser. How to Fix the Problem: This game requires the Flash plug-in. Download the latest Flash player now.

When I try to play certain games on pogo, I get this: Oops, something is not right...
Flash Plug-In Warning
Explanation:
You do not have the Flash player installed on your browser.
How to Fix the Problem:
This game requires the Flash plug-in.
Download the latest Flash player now.
So I download latest still get error message

It is best to go to the source, Adobe, to get their software and updates. Sometimes malware can infect sites with messages that appear legitimate, but will, instead, install malware/virus/trojan on your system. Read the following carefully to install and/or update Adobe Flash.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually. '''''You do not have Adobe Flash (aka "Shockwave Flash" in Add-ons > Plugins) installed.'''''
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Since Adobe Flash ran its latest update on my computer, I have not been able to watch any online videos. How can I fix this problem?

Since Adobe Flash ran its latest update on my computer, I have not been able to watch any online videos. How can I fix this problem?

see https://support.mozilla.org/en-US/questions/929196
thank you

Flash Builder 4 Beta 2 ---- Data Management Problem

Flash Builder 4 Beta 2 ---- Data Management Problem
I have a simple datagrid, a PHP service and a MySQL database. When I run the code I get multiple(7) records returned to the datagrid. Once I enable Data Management and run the exact same code, I only get 1 record returned.
Is there a setting in Data Management that affects the number of records returned?
Here is the MXML code I am testing.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" xmlns:carasgndataphp="services.carasgndataphp.*">
 <fx:Script>
 <![CDATA[
 import mx.controls.Alert;
 import mx.events.FlexEvent;
 var inptdata:String = "1";
 protected function dataGrid_creationCompleteHandler(event:FlexEvent):void
 getAsgnDataResult.token = carAsgnDataPHP.getAsgnData(inptdata);
 ]]>
 </fx:Script>
 <fx:Declarations>
 <s:CallResponder id="getAsgnDataResult"/>
 <carasgndataphp:CarAsgnDataPHP id="carAsgnDataPHP" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
 
 </fx:Declarations>
 <mx:DataGrid x="115" y="91" id="dataGrid" creationComplete="dataGrid_creationCompleteHandler(event)" dataProvider="{getAsgnDataResult.lastResult}" width="558" height="298">
 <mx:columns>
 <mx:DataGridColumn headerText="A" dataField="numAsgn"/>
 <mx:DataGridColumn headerText="T" dataField="numTopic"/>
 <mx:DataGridColumn headerText="U" dataField="numUnit"/>
 <mx:DataGridColumn headerText="P" dataField="numProblem"/>
 <mx:DataGridColumn headerText="TP" dataField="PType"/>
 <mx:DataGridColumn headerText="P" dataField="numSeqPresent"/>
 <mx:DataGridColumn headerText="F" dataField="numSeqFeedback"/>
 <mx:DataGridColumn headerText="D" dataField="numDelay"/>
 <mx:DataGridColumn headerText="ID" dataField="idAsgnData"/>
 <mx:DataGridColumn headerText="IDP" dataField="idProblem"/>
 </mx:columns>
 </mx:DataGrid>
</s:Application>

Hello,
Data Mangement expects unique values for id property.This issue may occur when you select 'Identity' property in Data Mangement wizard which is not unique in the Table.For eg:, you have selected 'name' field as identity property. And your MySQL database table has multiple rows with identical values for 'name' column.
Can you verify if you have similar setup?
Thanks,
Radhakrishna

Flash Builder 4 Beta Annoying - Keep imports organized - default feature - fix

I Began using Adobe's Flash Builder 4 Beta and started coding Actionscript code; I imported classes and at time intervals, Flash Builder 4 beta deleted my unused imported classes. It was really annoying since I imported all of the classes I need in the project. I think that the Flash Builder 4 should have this option turned off by default. I searched around the internet and found this to fix it. GO TO: Window -> Preferences -> Flash Builder -> Editors -> Actionscript Code. Uncheck "keep imports organized". See the image below. Hope it helps someone.

Hi Pat
That is the "Mark Occurances" feature. Click into the editor window, then on your toolbar you should see the "Mark Occurances" button, looks like the tip of a yellow highlighter. Toggle it off and that goes away. Obviously something some folks like on, others hate, but since you can toggle it shouldn't be a big deal.
Sincerely
Mark R. Jonkman

I have to reload a webpage to make a Flash Object in IE7 WinXP SP3. How can i fix this problem?

Hello:
When I want to navigate a webpage that contains a flash object, the Internet Explorer show the icon that the page contains an error, if I relod the page, the page now doesn't show the error and the Flash objects work well. This occurs recently, some weeks ago, I didn't have that problem. How can I fix this problem?
I'm using Win XP SP3, IE8 and Flash 14.0.0.145
I tried to uninstall the 14 version and installed the 13 version but the problem persists.

All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

Apple better fix this ios 6 iphone 4s wifi problem. alot of people are getting bloody ******. how do i fix this **** problem .

apple better fix this ios 6 iphone 4s wifi problem. alot of people are getting bloody ******. how do i fix this **** problem .

Celinaxoxo wrote:
apple better fix this ios 6 iphone 4s wifi problem. alot of people are getting bloody ******. how do i fix this **** problem .
Nah... there simply is not iOS 6 Wi-Fi problem with the 4S. I have not experienced any issues and neither has anyone else I know with iPhones.
User's like yourself really should drop the attitude and try some basic troubleshooting.
FYI, this is a user to user forum and statements like yours are very likely to get removed for violating the Terms of Use of these forums.

Adobe flash keeps crashing and reloading and changing timeout per your instructions, does not fix the problem. What else can be done?

I recently upgraded Firefox and now I cannot use it if I want to watch something involving Adobe Flash because it crashes. I read your article and made sure I am up to date on all programs through Firefox check page. I reset the timeout on the adobe flash to -1 per your article. Your article states it may crash and just re-load it. I have done all your advice and it still will not run. I am now using Windows as my default browser because I don't have time right now to research this on my own and solve it. I don't know if you are aware that the fixes you suggested are not fixing the problem.

Try reinstalling the previous version of Flash - 10.1 r 102 and get rid of that 10.2 r152 version. ''I never updated Flash and I haven't had a problem with Firefox 4.0 on WinXP.''
http://www.oldapps.com/flash_player.php?old_flash_player=19 
scroll down to 
Download Flash Player 10.1 (Non-IE Browsers)
or from Adobe 
http://kb2.adobe.com/cps/142/tn_14266.html

I cant find my all files in new version and older version is better than new and fix this problem....!

I can't find my all PDF in new version and older version is better than new and fix this problem as soon as possible....!

Hi Manoj,
what exact problem are you facing? Are you unable to locate your pdf files?
Regards,
Rahul

It seems that there is an inaccuracy in flash games. It is very difficult to hit the button especially if the button is small. How can I fix that problem ?

It seems that there is an inaccuracy in flash games.
it is very difficult to hit the button especially if the button is small.
E.g. in Battle Pirate, it is difficult to switch screenview( zoom out - zoom in )
Seen in many games, so I assume it has something to do with the flash player.
Been looking in settings, but can't find anything concerning mouse settings.
How can I fix that problem ?

You will just have to use other apps for Arabic. You can ask Apple to fix this via
http://www.apple.com/feedback/
I think Apple's iBookstore does not yet really support Arabic books.

All my pictures taken at night using the flash are white and hazy, how do I fix this problem?

All my pictures taken at night using the flash are white and hazy, how do I fix this problem?

If you don't use the flash picture is too dark.

TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

***URGENT*** - Problem Installing Flash Builder 4 beta

Hi folks,
I'm really having a trouble with Installing FLASH BUILDER 4 beta on my WinXP SP2, 1.5 Ghz processor, 256 Mb RAM, 1.12 GB free on C drive, 1.26 GB free on H:drive, and 1 GB free on D drive.
But still i'm getting this prompt by Installer files I dowloaded from Adobe Labs for Flash Builder 4 beta.
Do i need more Hard Drive space ?
I have attached the jpeg image of the prompt.
Please Help me with this. I have a client with a project to build on Flash Builder 4 beta & only got 3 days to deliver.
thanks in advance.
regards
Ronny Depp

Firstly, are you serious ?
virtually no hard disk space(the install files need to extract with enough space to actually then install the software)
virtually no ram 256mb is barely enough for windows XP to start up. How are you going to run Flashbuilder
1.5ghz cpu - hmmm I don't think flashbuilder will run on a pda....
delivering a project in 3 days with beta software that you are obviously unfamiliar with...sounds almost like a mastercard ad
$100 for a cpu, $100 for some ram, $100 for some hard disk, look on the clients face when he saw the result- priceless...
hate to take the mickey, but I couldnt let something like this slide by it was just to easy
David.

How I fixed my problem how about you

Background info
My Shuffle would not install properly on my laptop. I would plug it in the green light would flash twice then the orange/green error light would flicker then it would repeat that light pattern and windows would report a usb error.
Info about this solution
I found this solution on the web however it's orignal intent was to fix a problem with a sony camera that also used the USB mass storage drivers I have adjusted the guide to suit my situation. Also note that I knew ahead of time my USB 2.0 chain was unstable.
USE AT YOUR OWN RISK IF YOU SCREW UP YOU HAVE ONLY YOU SELF TO BLAME AND KNOW YOU WILL BE CLEARING ALL USB DRIVERS FOR ANY DEVICES YOU HAVE
My Laptop Runs XP SP2 Fully Updated
Step 0: Unplug ALL USB Devices NO Exceptions!
Step 1: Remove Hidden Devices
1. Click Start. Click Run. Type cmd and press OK.
2. Type "set DEVMGRSHOWDETAILS=1" (without quotation marks) and press Enter.
3. Type "set DEVMGRSHOW_NONPRESENTDEVICES=1" (without quotation marks) and Press Enter.
4. Type "start devmgmt.msc" (without quotation marks) and click press Enter.
5. Click View. Click Show hidden devices.
6. Click "+" to expand Unknown devices and USB devices.
7. Are there any USB and unknown devices (including grayed out devices)? If so, please right click it and click Uninstall. (Devices, Hubs, Controllers, Etc)
Step 2: Remove all oem*.inf files
=========================
1. Click start and click run then under the run line type in the command "cmd" (without the quotation marks)
2. In the command line, type in the following (without the quotes) and press enter after each command:
"cd \windows\inf"
"ren infcache.1 *.old"
"ren oem*.inf *.old"
"del C:\windows\setupapi.log"
"exit"
Step 3: Removing all entries under HKEYLOCALMACHINE/Enum/USB that start with VID
==================================================================
Removing the VID entries from the registry will cause them to be redetected at restart.
CAUTION: If you have a USB keyboard or mouse, do not remove the VID entry for these devices, otherwise, Windows may not restart correctly.
1. Click Start and click Run. Type regedit and click OK. The Registry Editor window will open.
2. Go to HKEYLOCALMACHINE\System\CurrentControlSet\Enum\USB.
3. Highlight and delete all the VID_.... entries. (Also I deleted the entire USBSTOREfolderE
Permissions may be set allowing the deletion of the VID_ entries by following the steps below:
a) Right-click the key to be deleted, and then click Permissions. The VID_... Permissions window will open.
b) With Everyone highlighted in the Group or User name section, select Full Control in the Permissions section.
c) Click Apply, and then click OK.
4. Turn off the computer.
Step 4: Reconnect the digital camera to the computer system:
1. Restart the computer.
2. Reinstall the software from the cd.
3. Restart Computer
4. After the Windows has finished restarting. Disable the USB 2.0 Controller in device Manager (aka USB ENHANCED)
5. Plug the Ipod into the usb port.
6. A New Hardware Detected window should open and reload the drivers.

Well, when I read 380W PSU I tyhought that doesn't sound much. What will all that kit you've got in there. Plus trying to run a raid on top which means the PSU works harder & uses more power.
But then I realised it's Antec TruePower and that means it ought to be fine @ 24A on +12v.
On the other hand I've seen lots of posts about an apparent incompatibility between Antec PSUs and nforce m/boards generally - have you seen those? This one refers to the Neo2 and doesn't really seem to reach a conclusion, but it has links to other discussions on the same subject. Maybe worth trying a different one just to test it.
Otherwise the next bet is the ram if it's low latency SPD in which case you may need to relax it a notch or try increasing the ram voltage a notch - but I don't know if what you have is low latency or valueram or what.
It might help if you could capture the crash error messages. You can do that by turning off automatic restarts so you get time to read the BSODs - or else there might be something in the event log.

Flash 8.5 Beta fixed my problems

Similar Messages

Maybe you are looking for