Flash 8 player components not exporting to dreamweaver?

Flash 8 player components not exportingI'm using Macromedia Flash 8 to create a player for my video. Everything worked out fine after I'd encoded it, and the player looked great in preview. All the components were in the same folder, eg. fla, flv, swf, html. However, once I'd exported the player to my Dreamweaver website directory, along with the components and inserted the flash onto my page, the player control panel wasn't there?
I've been over it repeatedly, and I'm sure I did everything right, even re-encoding various video formats, but still no player controls, even though it works fine outside my website?
Can anyone please help?

Hi
Its just when using one of the skins when i have the problem?
This is normal, you can use the flash skins in a flv exported from flash as a 'stand-alone' flash page, but they will not work when you try to use them as a skin in dreamweaver. There is a way around this limitation, but it does involve a fair amount of reprogramming of the flash skin as the components used are different to what is required for use in dreamweaver.
This article may help you in doing this - http://www.adobe.com/devnet/flash/articles/flv_tutorial_pt2.html. Especially when read in conjunction with - http://www.adobe.com/devnet/flash/articles/custom_flvcomp.html.
Should you have any problems following these articles, you may be better advised posting them in the flash forum, in this forum I have only read of a few people, (including myself) who have customized/created skins themselves, but I will leave this choice up to you.
PZ

Similar Messages

Flash 8 player components not exporting

I'm using Macromedia Flash 8 to create a player for my video. Everything worked out fine after I'd encoded it, and the player looked great in preview. All the components were in the same folder, eg. fla, flv, swf, html. However, once I'd exported the player to my Dreamweaver website directory, along with the components and inserted the flash onto my page, the player control panel wasn't there?
I've been over it repeatedly, and I'm sure I did everything right, even re-encoding various video formats, but still no player controls, even though it works fine outside my website?
Can anyone please help?

I don't know if this is a problem with Flash or Dreamweaver; please post in either of these forums (this is the Flash Player forum).

Embedded Flash video player does not appear

Regarding this page: https://dl144.infusionsoft.com/app/page/default-campaign-landing-page8
If you look at the source, there's an iframe containing an embedded video player from vzaar in that yellow space at the top of the screen. it renders correctly in all other browsers except FireFox 23. I'm on OSX 10.7.5
I also tried it on Firefox 24.0 on Windows 7 Home Premium with the same result - no player.
Can anybody suggest why the contents of the iframe do not appear?

That iframe is blocked because of mixed active content.
You can see this in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K)
<pre><nowiki>Blocked loading mixed active content "http://view.vzaar.com/1214912/player" @ https://dl144.infusionsoft.com/app/page/default-campaign-landing-page8
</nowiki></pre>
The main site is https and the iframe source is http://view.vzaar.com/1214912/player
*https://support.mozilla.org/kb/how-does-content-isnt-secure-affect-my-safety
*https://developer.mozilla.org/en/Security/MixedContent
A workaround is to set the security.mixed_content.block_active_content pref to false.

I need a Flash Media player....

Hey folks, how you doing....
I'm working on a project and I'm in need of a flash media
player, but not just any kind....
I've work with various mp3 as well as FLV video players, and
have had much success using them, but for this project I want to
add something special. It needs to be a bit of a all in one
unit....
The best example I could find of the kind of thing I'm
looking for was on the official John Mayer Site. (
http://www.johnmayer.com )
As you can see I would like the player to be able to play
back Video as well as audio (with jpeg background), have a active
play list and of course have the standard controls: Play, stop,
volume, next etc.... I would assume that the data will be fed from
an XML file as most players do.
If there's anyone out there that can help me with a easy
solution to implement this, or know whether I could purchase one
(commercially or private), please let me know. I would appreciate
it very much.
Thanks in advance.
Johnny

Hi Johnny,
You can create your own FLV player and add the mp3
functionality into this
example.
http://www.flashjester.com/index.php?section=faq_search&search=flv#385
p.s it resizes at runtime which normal flash files you cannot
do.
Hope you find this useful. Its a good start.
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

Adobe Flash Player will not play my .flv video

I redered a 5 min editing from Premier CS4 as steaming FLV, but if I try to play it in Adobe Flash Player, the player will open with white background and not play the movie. The file is playing though in other players like Adobe Media Player. Is there something special about a movie flv to play in AFP?
Thank you,

FLV needs to be inside of a SWF container that manages it's playback. The Media Player provides that for you, but the standalone Flash Player doesn't. So you can make one in Flash easily with components, or you can just download any one of the many free ones (for example, I've personally used Jeroen Wing's "JV Player" from longtail)

Flash Audio Player inserted via Dreamweaver

I am looking for a flash solution to insert easily into a dreamweaver html page. I need a small audio player with a start and stop button. It should have a white background (no text). To work like the example in www.spolin.com/about.html
I would like to have a flash plug in that allows me to insert into another webpage and use an FLV file or other audio format.
Dreamweaver's player does not look good inserted into any webpage.

This information and tutorial assumes I have knowledge of programming and flash pro. I have no knowledge of programming.
Is there a tool or an existing simple player I can modify easily without knowing much about Flash Pro or programming?
I bought Flash Pro because a tech support person from Dreamweaver told me I needed it in order to convert my flv to something that would work in Dreamweaver. I am only an intermediate user of Dreamweaver and Flash Pro is overwhelming in its capacity. I have no idea how to use it.
The player included in Dreamweaver is terrible. It assumes the sound file must be played as a video and inserts a black default video screen with the player controls.
There is no way to simply insert a play, stop button player using Dreamweaver's insert flv player.

Best export from FCP4.5 for conversion to Flash video player?

Hi,
I'm prepping a 5 min edit production for the best web presentation w/o excessive file size / loading time. The production has a lot of subtle detail & layered images so there a lot of opportunities for this to turn to mud (shot on low grade digital consumer video camera & also in lower light settings).
I exported in H264 at med quality & got a good looking 75 meg file. Tried uploading to YouTube, fearing the worst, and it actually created something decent from that file. I could just link that embedded file to the intended website, but I dont want that YouTube logo in the corner. I'd rather recreate what they do in Flash w/o the logo.
Does anyone have info on what YouTube does to the videos it processes into those flash video player files? Compression or resolution settings? It looks like going that route will give better results that can be universally viewed than the standard mpeg route. (file size & universal viewing on all platforms are my only reason not to post in H264).
Are these issues best solved going from a big FCP export and handled with settings in Flash? Or is there some export choice in FCP that will give best (size & res) quailty with minimal influence needed from Flash?
I've tried Compressor but havent been able to get any results from it. I just get errors that I dont understand. If thats the solution, I'll dig into that further, but would appreciate any tips / guidance.
thanks
Duane
G5 tower Mac OS X (10.4.8)

You could try Sorenson 3 at 640x480. Try a quality setting of about 80 percent.

Is Anyone Else Sick and Tired of Flash Player 10 Not Installing?

I've tried everything under the sun to get Flash Player to install on my PC, to no avail. I went to the Adobe site and followed their instructions to the letter regarding how to resolve Flash Player installation problems. I've also tried every suggestion on every discussion board/forum that I could find. Flash Player still won't install or run. I have no Flash Player capability on any site, including Youtube, which out of the blue stopped letting me watch videos because I have an "old version of Adobe's Flash Player" and I must "Get the Latest Flash Player." Believe me, I'd like to get the latest Flash Player. Not only have I wasted hours of my life trying to find a solution to this problem, hours that I can never get back, but it also exceedingly frustrating to go through one attempt after another after another with the same unhappy results. Judging by what I've read online, there are untold multitudes experiencing this same problem. What can be done? I've all but come to the conclusion that the answer is nothing.

...and here is what I did. Again, Im on a macbook pro 2008 edition on 10.5.7.
First of all, I tried everything simple I could think of. I have been having issues updating my CS3 Suite from day 1 (the updater would fail every time) and was told I needed to uninstall the Creative Suite and reinstall it on another profile to troubleshoot it. That would mean losing my Dreamweaver files, so I just put up with it.
I tried:
Quitting my browsers, reopening, downloading Flashplayer 10 and installing. Installer ran, Suceeded, and erased any player I had period. FAIL
Uninstalling the flash player, reinstalling Flashplayer 10, Installer ran, Suceeded, still no player. FAIL
Uninstalling the current flash player, reinstalling Flashplayer 9, Installer ran, Suceeded, reinstalled Flashplayer 10, removed all Flash player versions from browser detection . FAIL
I decided to stay with FP9 so that I could view ANY flash content until I got this fixed.
I had heard something about Filevault compatibility issues with the Adobe software. To me, this was stupid that this would exist and from what I read more people were getting flamed for USING the available Filevault options than getting real answers as why there was a conflict between the two.
"Your answer for the issue with Adobe and FIlevault? Don't use Filevault..." What kind of response is that, people? I feel the same about IE for you Windose users... you should all convert to Firefox or Mozilla, but is that the answer to why something should supposedly work on your computer and it is refusing to do so? Not really...
So, seeing that I am no longer in the need for the physical increase in security via File vault and really wanting to be able to not only view those little movies embedded in my Facebook posts but also try updating my creative suite3, I tried turning off Filevault.
"FAILED: You must have at least 37.7GB available Disk space to Disable FileVault"
What?! What gives... why would they need you to have that much space to do a disable? Either way- I have 21gb available at the time. Time to archive some photos and movies.
I dumped everything in my pictures folder but my iPhoto files and all of my movies onto a backup drive and fixed permissions freeing up a total of 53gb, which were all out of whack. I restarted my computer and then proceeded to turn-off file vault which took a few hours.
Today, as I started up Adobe PhotoshopCS3- my updater ran, as it has, and prompted me to update. I figured- What the heck, I'll try- and sure enough.. the updater.... worked. I now had the complete updated version of CS3... but did my flashplayer update also? Nope. Still Flashplayer 9.
I ran the updater, and voila- I now a the owner of a shiney new working Flashplayer 10.
So.... if you are on a Mac like meeeeeeee... you might try turning OFF filevault also if it is enabled. If you dont have it on, Maybe free up at least 50gb and see if that helps.
Otherwise, we're singled out in this array of "HAHA! You LOSE!" in the world of updaters from Adobe. Good luck... and good night.
-Jyn

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Flash Player does not work after steps to resolution

I am using Windows 8.1 and flash player will not work. I have "enabled" and removed Active X control as per instructions but it still does not work.

8.1 means Ie11... and that means...
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Flash Player does NOT work with Mozilla Firefox

I have Mozilla Firefox on my computer which uses Windows XP 32-bit and the flash player (newest version) simply does not work. I have successfully followed ALL instructions for making it work but nothing has changed. I have an .SWF file that I wish to open but I get the message that flash player is not installed on my computer but it is confirmed as installed. I need it to work but I am not a computer whiz.

Hi! The Shockwave Flash plugin has be disenabled and re-enabled numerous times….
I have Mozilla Firefox 22
These are the files in my \Windows\system32\Macromedia\Flash file:
flashInstall
flashplayer.xpt
FlashPlayerUpdateService
Flashutil32_11_8_800_94_Plugin
genuinst
install
KB923789
mms.cfg
NPSWF32_11_8_800_94.ddl
plugin.vch
I have already spent at least 8 hours trying to understand what to do with no change and as I said before I am not a computer whiz….
Thanks for your help!
Raney

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Flash player does not work in Windows 8 tiles

Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system. What should I try next?

This is a known issue with Flash Pro CC - GM build.
this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
Please reply if it still persists after the update.
-Sujai

Flash 8 player components not exporting to dreamweaver?

Similar Messages

Maybe you are looking for