Flash 8 SWF loading Flash 6 and 7 SWF with quality issues

I have made a Flash 8 .exe that "loadmovie"s a
Captivate(Flash 6) SWF. The animation screenshots come out blurred
when the SWF is loaded in the Flash 8 .exe. If I create a test
Flash 7 .exe, this does not happen. Any Ideas?
PS - I need to use Flash 8 because of filters and VP6
video.

It's not completely clear what you're saying.
Do you have a wrapper SWF that first dynamically loads the
Flash 6 movie? If so, then is that wrapper in Flash 8 format? If
that's the case, then if someone has only the Flash 6 Player then
it may not be displayed anyway.
If what you're doing is loading the Flash 8 movie into Level
0 of the Flash 6 movie, then this may be causing some of the mess
you're experiencing.
Normally there are two ways to catch a viewer that doesn't
have the Flash 8 Player: 1) a detection script, which usually
works, and is part of many of the HTML templates that are built
into Flash (HTML Settings panel); or 2) Put the Flash 6 movie on a
separate HTML page from the Flash 8 SWF.

Similar Messages

Flash doesn't work and work with another browser!!

''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
Flash doesn't work and work with another browser!!.
The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!

Whay do you mean "difficult with the camer?"
Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

What's the best Mac to run Logic Pro 9 and above with no issues

What's the best Mac to run Logic Pro 9 and above with no issues?

Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

Indesign won't install past 42% then says it failed. I downloaded photoshop and illustrator with no issues.

Ive tried to download Indesign but it won't go past 42% on the download bar and then it says it failed. no information to why.
I downloaded Photoshop and Illustrator with no issues
on a Mac running 10.0.5

Dededededede I would recommend reviewing your installation log files to determine if the installation or download has failed. If the installation has failed then there will be a specific error within the log which will determine why there was a failure. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

MBP 9,2 no longer recognizing my 3rd Gen Apple TV - wife's MPB 8,1 recognizes and connects with no issues.

My MBP 9,2 (2.9GHz i7/8GB/750HDD) no longer recognizes my 3rd Gen Apple TV while my wife's MBP 8,1 (2.3GHz/4GB/320HDD) recognizes and connects with no issues. All are running current software.

Hello herbnmyth,
Thank you for using Apple Support Communities.
I see that you are having difficulties with connecting the Apple TV with your computer. The following article provides information for troubleshooting Home Sharing and should help you sort the connections.
Troubleshooting Home Sharing - Apple Support
Regards,
Jeff D.

Flash Player is Faulty and Riddled with Bugs

Adobe Flash Player 10 is faulty and riddled with bugs.
Those are not my words but it is what I was told by the NFL (National Football League) as many of their customers are experiencing extreme difficulties in using NFL content and services that utilise flash.
http://www.youtube.com/watch?v=SOu8edrbb4I
It is not just myself who is having problems with Flash but a multitude of people.
Adobe have released a faulty bug ridden product that doesn't work properly and they have effectively shut down half the web which is flash based in the process preventing many multitudes of people around the globe from using numerous websites.
Are you listening Adobe? You caused this problem. When are you going to fix it?
John

John10012 wrote:
Are you listening Adobe? You caused this problem. When are you going to fix it?
First of all, you are not addressing Adobe here - this is a user-to-user forum, and we are all just users here.
Second, if you need help with your Flash Player installation, give us some facts, and someone will help you. (That is, if you want some help, and not just complain.)
I have watched that long and unnecessary video (giving us the error message would have been much easier), and the problem comes from incorrect registry permissions on your system. It can easily be fixed by following the instructions on this article http://kb2.adobe.com/cps/494/cpsid_49419.html

SWF loaded into MainNav SWF - Rollovers & Links Don't Work

Hi all,
This is probably a very basic question!
I have a Fla file with Text and Movie clips in it. The Text
is animated when rollover occurs and thumbnail images click and
link to the full size versions.
It works when published (Say "LatestText.SWF").
But when I call it from my Main Nave FLA/SWF, upon loading
the Text.SWF, the rollover anim doesn't happen and the picture
links don't work when clicked.
I have the latest flash player installed and the actual
weblink cursor appears as if the SWF acknowledges everything is
working, but nothing dynamic actually works.
Any Ideas? THANKS ALL! Much appreciated!

I'll try to flesh it out, although I don't think there's need
for any code behaviours as they all work fine - until the info.SWF
is loaded into the main.SWF.
So i'll try my best to flesh this out:-
I have a Navigation FLA which publishes to SWF (at the moment
Allow access to Local Files - tried network).
This Nav.FLA is the main bulk of the website, it has all the
links and window panes.
I have a downloaded window pane style component which is an
autoscroller (in case this could be the problem).
I can load my info.SWF's straight into the container, by way
of an Actionscript Anim Frame (1) and when the Nav.SWF is tested or
published, it indeed loads in the smaller info.SWF no problems and
scrolls around beautifully,
The Info.SWF's I'm creating is just basically embedded
dynamic text, with a few movie clips that have Behaviours when
clicked or rolled-over.
These Behaviours do not seem to work when the Nav.SWF's
window pane loads in the Info.SWF - they APPEAR clickable (mouse
pointer changes to hand) but nothing clicks and THEN works. The
rollover animations (actioned via behaviours from LABELS - not
frame numbers) also do not work?
Any ideas from those that know to those that struggle would
be greatly appreciated! It's the first time I've encountered a
problem with my Flash website that I can't seem to find an answer
to in all my tutorials and books!
There's a challenge!

SWF Loader scaling my SWFs

Hello all,
I have a Flex app that loads in a swf using 'SWFLoader' tag.
the SWFloader and the swf being loaded in are the same height and
width (see attached code) Now, the SWF getting loaded in is also
468 X 351 however the designers that made it have crazy amount of
random Movie Clips EVERYWHERE that isn't on the stage. My guess is
that the actual height and width of the SWF is close to 1000 X
1000. When I load this SWF in to my SWFLoader it scales everything
down so all of the MovieClips are inside of this SWFLoader rather
than just the SWF's Stage. Any Suggestions?

"whomba" <[email protected]> wrote in
message
news:glq6j0$b20$[email protected]..
> Hello all,
> I have a Flex app that loads in a swf using 'SWFLoader'
tag. the SWFloader
> and
> the swf being loaded in are the same height and width
(see attached code)
> Now,
> the SWF getting loaded in is also 468 X 351 however the
designers that
> made it
> have crazy amount of random Movie Clips EVERYWHERE that
isn't on the
> stage. My
> guess is that the actual height and width of the SWF is
close to 1000 X
> 1000.
> When I load this SWF in to my SWFLoader it scales
everything down so all
> of the
> MovieClips are inside of this SWFLoader rather than just
the SWF's Stage.
> Any
> Suggestions?
>
> <mx:SWFLoader id="mainMovieSWF" height="351"
width="468"
> source="{mainMovieSrc}" scaleContent="false"/>
Try wrapping it as a component with the Flex component kit.
That way you
get to specify the bounding box.
HTH;
Amy

I turn on my labtop BUT is stuck (only loading around and frozen with apple logo )on apple sign page

i switch on my labtop MacBook Pro (new one ) but is not running it just stuck on first page black and white with circle loading around !???

Take it to an Apple store or AASP.

Load Balancing and Failover with 10G Standard Edition

Hi,
I am new to Oracle Replication and need some help setting up replication for load balancing and failover. Is this possible using Oracle 10G Standard Edition? I plan on having all updates done on the master site and both databases will be for reads. In case of failure of the master site, I would need to be able to failover to the other database.
Also, if anyone knows of any documention for Basic Replication in 10G, please let me know.
Thanks.

Simple nnapshot replication of data would require significant manual effort to configure to load balance or failover. One the load balancing side, you would generally be limited to to static load balancing-- assigning half the users to one machine and the other half of the users to the other machine, regardless of who is actively using the machine. Failover would be a significant manual effort, particularly to bring the failed machine back into the cluster. You would be implementing the guts of multi-master replication.
Frankly, if you actually have a system which is valuable enough to need load balancing and disaster recovery, I'm going to wager that it will be far cheaper even in the short run to buy more boxes and/or enterprise edition licenses than to try to implement this sort of thing yourself. In the long run, it will be far cheaper, since it will be far easier to maintain. Building all this yourself would probably be penny wise and pound foolish.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

[Solved]Updated system, and dealing with glibc issue.

I neglected to update/use Arch for quite some time, and decided to last night. I quickly encountered problems and I've read https://www.archlinux.org/news/filesyst … equired-1/, https://www.archlinux.org/news/the-lib- … a-symlink/, https://www.archlinux.org/news/fontconf … -required/, http://allanmcrae.com/2012/07/updating- … e-install/, and many threads about issues with filesystem and/or glibc.
First, I followed the instructions to resolve the issue with fontconfig.
<read various threads>
Then, I landed here: https://wiki.archlinux.org/index.php/De … iki:usrlib. I installed glibc-2.16.0-1-x86_64 using the instructions provided. IIRC, I was still experiencing conflicts with filesystem. I came across a thread where a user stated that instructions from Allan McRae's blog (from the link at the top) allowed him to upgrade his system. I tried it out, and I got around the filesystem issue as well as the issue with dependencies linked to tzdata, etc. My issue now lies with the pacman -Su step:
[asdf@asdf ~]$ sudo pacman -Su
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (1): glibc-2.16.0-5
Total Installed Size: 37.63 MiB
Net Upgrade Size: 0.05 MiB
Proceed with installation? [Y/n] y
(1/1) checking package integrity [###############################] 100%
(1/1) loading package files [###############################] 100%
(1/1) checking for file conflicts [###############################] 100%
error: failed to commit transaction (conflicting files)
glibc: /lib exists in filesystem
Errors occurred, no packages were upgraded.
Following Issue 2 under https://wiki.archlinux.org/index.php/De … iki:usrlib, I entered
$ grep '^lib/' /var/lib/pacman/local/*/files
. The output was:
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/security/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/security/pam_ck_connector.so
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/basic.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/basic.target.wants/console-kit-log-system-start.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-daemon.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-restart.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-start.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/halt.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/halt.target.wants/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/kexec.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/kexec.target.wants/console-kit-log-system-restart.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/poweroff.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/poweroff.target.wants/console-kit-log-system-stop.service
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/reboot.target.wants/
/var/lib/pacman/local/consolekit-0.4.5-2/files:lib/systemd/system/reboot.target.wants/console-kit-log-system-restart.service
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/ld-linux-x86-64.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libBrokenLocale.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libSegFault.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libanl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libc.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcidn.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libcrypt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libdl.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libm.so.6
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libmemusage.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnsl.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_compat.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_db.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_dns.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_files.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_hesiod.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nis.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libnss_nisplus.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpcprofile.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libpthread.so.0
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libresolv.so.2
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/librt.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db-1.0.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libthread_db.so.1
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil-2.16.so
/var/lib/pacman/local/glibc-2.16.0-1/files:lib/libutil.so.1
/var/lib/pacman/local/hal-0.5.14-6/files:lib/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/rules.d/
/var/lib/pacman/local/hal-0.5.14-6/files:lib/udev/rules.d/90-hal.rules
/var/lib/pacman/local/lib32-glibc-2.14-5/files:lib/
/var/lib/pacman/local/lib32-glibc-2.14-5/files:lib/ld-linux.so.2
/var/lib/pacman/local/ntfs-3g-2012.1.15-4/files:lib/
Being a newb, I didn't want to do something stupid, so I didn't take any action here..
I proceeded on with trying
find /lib -exec pacman -Qo -- {} +
The output was:
error: cannot determine ownership of directory '/lib'
/lib/libutil.so.1 is owned by glibc 2.16.0-1
/lib/libnsl.so.1 is owned by glibc 2.16.0-1
/lib/libnss_compat-2.16.so is owned by glibc 2.16.0-1
/lib/libSegFault.so is owned by glibc 2.16.0-1
/lib/ld-linux.so.2 is owned by lib32-glibc 2.14-5
/lib/ld-2.16.so is owned by glibc 2.16.0-1
/lib/libpthread.so.0 is owned by glibc 2.16.0-1
/lib/libnss_nisplus.so.2 is owned by glibc 2.16.0-1
/lib/libthread_db-1.0.so is owned by glibc 2.16.0-1
/lib/librt-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_files.so.2 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/ufw'
error: No package owns /lib/ufw/user6.rules.pacsave
error: No package owns /lib/ufw/user.rules.pacsave
error: cannot determine ownership of directory '/lib/udev'
error: cannot determine ownership of directory '/lib/udev/rules.d'
/lib/udev/rules.d/90-hal.rules is owned by hal 0.5.14-6
/lib/libnss_hesiod-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_dns.so.2 is owned by glibc 2.16.0-1
/lib/libnss_hesiod.so.2 is owned by glibc 2.16.0-1
/lib/libm.so.6 is owned by glibc 2.16.0-1
/lib/libnss_files-2.16.so is owned by glibc 2.16.0-1
/lib/libc-2.16.so is owned by glibc 2.16.0-1
/lib/libBrokenLocale.so.1 is owned by glibc 2.16.0-1
/lib/libdl.so.2 is owned by glibc 2.16.0-1
/lib/libutil-2.16.so is owned by glibc 2.16.0-1
/lib/libBrokenLocale-2.16.so is owned by glibc 2.16.0-1
/lib/libpthread-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_nisplus-2.16.so is owned by glibc 2.16.0-1
/lib/librt.so.1 is owned by glibc 2.16.0-1
/lib/libnss_nis-2.16.so is owned by glibc 2.16.0-1
/lib/libc.so.6 is owned by glibc 2.16.0-1
/lib/libcrypt-2.16.so is owned by glibc 2.16.0-1
/lib/libresolv-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_db.so.2 is owned by glibc 2.16.0-1
/lib/libcidn.so.1 is owned by glibc 2.16.0-1
/lib/libresolv.so.2 is owned by glibc 2.16.0-1
/lib/libmemusage.so is owned by glibc 2.16.0-1
/lib/ld-linux-x86-64.so.2 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/security'
/lib/security/pam_ck_connector.so is owned by consolekit 0.4.5-2
/lib/libanl-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_compat.so.2 is owned by glibc 2.16.0-1
/lib/libcidn-2.16.so is owned by glibc 2.16.0-1
/lib/libm-2.16.so is owned by glibc 2.16.0-1
/lib/libcrypt.so.1 is owned by glibc 2.16.0-1
error: cannot determine ownership of directory '/lib/systemd'
error: cannot determine ownership of directory '/lib/systemd/system'
/lib/systemd/system/console-kit-daemon.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/kexec.target.wants'
/lib/systemd/system/kexec.target.wants/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/basic.target.wants'
/lib/systemd/system/basic.target.wants/console-kit-log-system-start.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/poweroff.target.wants'
/lib/systemd/system/poweroff.target.wants/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/halt.target.wants'
/lib/systemd/system/halt.target.wants/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
error: cannot determine ownership of directory '/lib/systemd/system/reboot.target.wants'
/lib/systemd/system/reboot.target.wants/console-kit-log-system-restart.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-stop.service is owned by consolekit 0.4.5-2
/lib/systemd/system/console-kit-log-system-start.service is owned by consolekit 0.4.5-2
/lib/libdl-2.16.so is owned by glibc 2.16.0-1
/lib/libnsl-2.16.so is owned by glibc 2.16.0-1
/lib/libnss_nis.so.2 is owned by glibc 2.16.0-1
/lib/libnss_dns-2.16.so is owned by glibc 2.16.0-1
/lib/libpcprofile.so is owned by glibc 2.16.0-1
/lib/libnss_db-2.16.so is owned by glibc 2.16.0-1
/lib/libanl.so.1 is owned by glibc 2.16.0-1
/lib/libthread_db.so.1 is owned by glibc 2.16.0-1
Again, I'm not sure what to do here.
On an irrelevant note, a red flag went up earlier. By some means, it appears I messed up Arch. Is there a chance I can fix the issue with the kernel or is the best option a reinstall?
(482/563) upgrading linux [################] 100%
>>> Updating module dependencies. Please wait ...
depmod: ERROR: could not open directory /lib/modules/3.6.10-1-ARCH: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
error: command failed to execute correctly
(498/563) upgrading nvidia [################] 100%
depmod: ERROR: could not open directory /lib/modules/3.6.10-1-ARCH: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
If your card is from the 7xxx series or earlier, install nvidia-304xx
[asdf@asdf ~]$ ls -ld /lib
drwxr-xr-x 6 root root 4096 Dec 22 15:11 /lib
[asdf@asdf ~]$ mkinitcpio -p linux
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> ERROR: '/lib/modules/3.6.10-1-ARCH' is not a valid kernel module directory
Thanks in advance.
Last edited by illusory (2012-12-24 00:24:47)

I checked out https://wiki.archlinux.org/index.php/Initramfs, and I'm not sure what to do. I rebooted a few times in attempt to get things going. I'm assuming I need to start by logging in to the live CD as root and mounting the sda in which Arch is installed? I don't know how to mount root nor know the complete title for the Arch partition (sda x,x). Sorry for the hassle.
Edit: Found https://wiki.archlinux.org/index.php/Ch … partitions. Be back in a bit.
I currently have the temporary filesystems mounted, chrooted, and am in bash.
# mkinitcpio -p linux
doesn't work. I tried
mkinitcpio -g ..... 3.6.10-1-ARCH
and I received something about 3.6.10 and a module directory.
Last edited by illusory (2012-12-23 23:26:00)

Can Flex3 generated swf load Flash Builder generated swf?

Hi All,
My company is corrently using Flex 3 appliaction (Host application) to host other Flex3 applications (Widgets).
We load the host application and the host appliaction loads couple of widgets (using SWFLoader) that were also compiled using flex bulder 3.
My qustion is, can i load swf files that where compiled using Flash Builder my Flex3 host application swf?
Thasnk in advance,
Lior

Old content cannot load content from newer versions. You can go the other way around though, so upgrade the main app to Flex 4 and you can load Flex 3 content into it
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Finding Flash Installation, alter settings and use with webcam

I am running on Windows 7 using Chrome. I am doing a course where I need to send information from my webcam to a website. I downloaded Flash Player and somewhere on the website it had a section where it had the address of the university. It also had another address not applicable so I deleted that and in doing so also deleted the address of the uni. I know diddly squat about both the webcam and Flash and am really running out of time to submit my assignments. Flash did unload on my computer, but to where, I have no idea. I have done searches but it nothing. So that took most of yesterday. Today, I researched it further and it was suggested that Flash was incorporated in Google and was enabled by fault and included in Chrome system updates. So I went into plug ins and find the Flash listing is enabled. There is also only one listing on the plug ins in spite of me downloading one yesterday and it is supposed to be on Chrome as well. .Bottom line ..... how do Flash and the webcam work together? How do I reinstall the university's web address on Flash, does it automatically attach itself to webcam and then do I get the option of who I share my webcam work with. Hope you can understand all this because I can't and I am getting a mighty nervous about getting these assignments out. Many thanks

This is the Shockwave Player forum; your question should be posted in the Flash Player forum.

Slow loading blog and problems with comments

I've had a number of visitors e-mail to say that my blog takes too long to load, that the page is "jumpy" when scrolling down the page, and that it may not allow the person to comment or when commenting the site unexpectedly closes.
I've tried viewing the site using a PC and I see these problems with Firefox. IE users can leave comments and the site loads a bit better but not ideal.
Are other users experiencing these problems?

Kathryn ~ You could try downsizing your images manually using, for example, the Preview app and choosing File > Save As... then reducing the Quality slider.
Or downsize them automatically via:
...which I haven't personally used. Also I don't know whether it works with iWeb '06.

Screen constantly flashes when loading flash site

Hi,
I have a sparadic problem, i have been told that occasionally
when the site is loaded the entire page will constantly flash until
refreshed. The problem is on both Mac and PC, and on Firefox, IE
and Safari, which leads me to believe there is a bug, or something
i am doing in the code. It has happened on 2 sites,
www.charlesward.com and www.djhdesign.com
If anyone else has had this problem please let me know if you
found a solution. If anyone is willing to help i can send you the
.FLA.
Thanks for any help,
Pat

patbegg wrote:
> Hi,
> I have a sparadic problem, i have been told that
occasionally when the site is
> loaded the entire page will constantly flash until
refreshed. The problem is on
> both Mac and PC, and on Firefox, IE and Safari, which
leads me to believe there
> is a bug, or something i am doing in the code. It has
happened on 2 sites,
> www.charlesward.com and www.djhdesign.com
> If anyone else has had this problem please let me know
if you found a
> solution. If anyone is willing to help i can send you
the .FLA.
Hi Path
It does it for me too, not an entire page by loaded images.
My guess is that your
preloader loop action has problem. After loading goes to
frame and comes back to the
loader frame. Perhaps no stop action on the frame where image
is ? There is for sure
a loop, you need to place stop action somewhere and all
should be ok. Beside that
nothing else seem to be making problems.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Flash 8 SWF loading Flash 6 and 7 SWF with quality issues

Similar Messages

Maybe you are looking for