Flash 8 with dx10 card and vista

I have recently purchased a new pc whis has vista os and dx10
video card(nivida 8400 gs) and get an erro message when I start to
encode a video using flash8 encoder
Is it dx10 card or vista that is causing the problem? or
maybe both?

Hi there,
Try using...
unloadClip(myContent);
instead of
unloadMovie(myContent);
unloadClip is the proper method to use when removing content
created with the MovieClipLoader class

Similar Messages

Color issues with Business Cards and Vista Print (Ps & Ai)

So I use Vista Print for my business cards, quick, easy and affordable.
I had some graphics that could not be reproduced in Ai very easily so I downloaded the Vista Print .PSD template and worked off of that.
When the cards came in color was correct but the font was not good. Not very clear and there was digital noise around the edges, so not crisp.
So I downloaded the Ai template from VP, reproduced the card in Ai and just dropped the logo in on the canvas and redid all the text in Ai.
When I got these cards in, the font looked much better and crisp, but all my colors were off. My navy blues were not navy-purplish looking. Side by side, it was a big difference.
I didn't change any color profiles I even made sure the CMYK values from the original photoshop file matched exactly to the Ai file.
So question is, why would the Ai file print differently if the CMYK color values were the exact same? It makes no sense to me. Was it perhaps how I saved the Ai files? There are so many options when saving it's a bit overwhelming.

Believe it or not, the Vista Print cards could be color copies. Try and post a screen shot of each card so we can see the differences. Not sure how you proofed the card redo out of Illustrator and/or what you used to print the redo card. The problem with Vista Print is quality control. You say the card color is accurate in the VP cards. However, did you proof the card before sending it to VP? If you did, how?

Scanning with Kodak i65 and Vista

Hi,
I am having trouble 'Creating a PDF from Scanner' with a Kodak i65 scanner. Everytime I attempt to scan a document with Acrobat 8 and Vista I receive a scanning failed message. The 'Scan Validation Tool' scans documents fine to the .tiff format however when I try to scan documents with Acrobat 8 it doesn't work and I get 'Scanning failed.'
Any help would be greatly appreciated.
Thanks,
Andrew

I have the exact same problem. Except I have the Kodak i30 Scanner. I have Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed).
In the past, I ran the following configurations on an older computer with no problems:
- Windows XP & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 6.0 (with all of its various updates)
- Windows Vista & Adobe Acrobat Professional 8.1.2 (with the Security Update 1 installed)
However, when I built a new computer, installed Windows Vista Ultimate, installed the Kodak i30 Scanner, I receive a "Scanning failed." error everytime I try to scan directly into Acrobat.
BTW, I HAVE "tried with latest Scan Validation Tool and firmware update from Kodak site." Updating the SVT and firmware neither helped nor hurt.
Has anyone had a successful fix to this issue?

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

Order Miix 2 10 With sim card and 3G support

Hi,
I want order and buy Miix 2 10 With sim card and 3G support, please help me how i can order this tablet with these features?
i'm not in us/canada.
thanks in advance.
Moderator comment: Please refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards. Bumping post(s) removed.

As long as it's not a Verizon iPad, sure.

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

I have a camera with sd card and iPad mini. I'm going travelling and need a way to upload pics to a cloud or Dropbox. Any help would be great

I have a anion ixus camera with sd card and an iPad mini. I'm going travelling and need a way to upload pics to a cloud or Dropbox. Any help would be great.

That should read canon

Wireless printer sharing with windows 7 and vista operating systems.

hello can anyone help me?
i have a new HP pc with windows 7 OS, and have an epson PX710W 3in1 printer.
i want to connect a laptop with vista OS to share the printer (wireless set up).
the pc will print documents ok via wireless link, but when i power up the laptop it appears to inhibit the printing function (document will not print).
i have set up file/ print sharing but there is the problem. it appears to me that sharing is only possible between pc,s etc with windows 7 OS via the homegroup set up. Has anyone encountered this problem at all, has anyone any ideas? or is it a configuration problem that i'm not aware of?

I found that I had issues with getting all of these to work - individually. I have an XPPro (32) pc trying to print to Win7Ultimate printer - printer is shared with all settings wide open, works great with another 7 or Vista machine, but same errors
as above for XP. I got it to work an old way, and then the "local port" way worked. I don't really know why as yet, but I am investigating.
My Solution -
1. As stated in other posts, install the printer locally on the XP machine. Make sure that it prints.
2. Connect the printer to the 7 machine, print a test, then change the file and print sharing options to "yes". I also installed the "Universal Driver" for my printer - HP1200 Laserjet.
3. Make sure that the Network type that the 7 machine sees is "Work" or "Home", not "Public". - I don't know if this really did anything or not, but I did make the change - mine thought the network was "Public".
4. Go back to the XP machine, if you get errors when you add the "Local Port" as suggested, then do this -
Warning Old Dos Trick -
- Open a Command Prompt, then type (without quotes) "net use Lpt1 \\COMPUTERNAME\PRINTERSHARE " - where "computername" is the name of the computer and sharename is the shared name of the printer
on that computer.
- you SHOULD see "command completed successfully", if not check to make sure that you have rights on the 7 machine. Now you should be able to print a test page to the printer. CAUTION - it took awhile for the changes to
take, so you may have the hourglass looking at you for a few minutes. - Once you reboot this will not work as the connection is just for that session.
To explain: this command is the dos version of what happens when you re-route output to a different destination - thus any traffic to LPT1 goes to \\computername\sharename.
5. After this worked, I then could add the "local port", as detailed earlier and had no errors.
Hope this helps someone else!

Adobe flash issues with both IE6 and Firefox

I just installed adobe flash 9 on my win2k computer. When I
try to go to www.yourminis.com I get two different results, in IE6
I start to get a web page, but then IE freezes. In Firefox, I get a
big blue quicktime Q the blinks a bit, then a question mark
superimposes over the Q and nothing else happens.
I also cannot view this page under Firefox in Freespire
Linux, but there, it tells me I don't have a new enough version of
Flash Player, but I downloaded and installed the newest version
available for Linux, and I tried both the normal automatic install
and the manual install (which was a pain in the butt because
Freespire has no admin log in, and you have to do all your copying
of files from a command line using the sudo command...)
Why is this happening? I even have an issue with flash and
the yahoo home page, in IE6 it works fine, but in Firefox, where
you normally see the yahoo logo at the top of the page, instead you
see the big blue Quicktime Q and then the question mark, and the
yahoo logo never comes up (this isn't a big issue, I don't need to
see the animated yahoo logo, but since Firefox is doing the same
thing on www.yourminis as it is with the Yahoo logo animation, I
thought it might be significant)
I even disabled ALL file types in Quicktime's settings except
Quicktime Movies format, because QT won';t LET me disable that one.
Still having the same problems.
Oh, and all this is happening under Administrative User, with
full priveledges in Win2k, so don't tell me I need to be admin or
something like that.

This should be the about:crashes page.
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the about:crashes page.
*You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

Writing file with windows 7 and vista os..

hi,
since i am using Windows XP operating system with Labview, i made a executable file and i trying to install with Windows 7 or Vista OS installed PC.
when my device is detect it will gives the hardware information , that have to save in to the hard disk, where i am usually putting near to my Application
program exe file. using XP will not be any problem its creates and writes the information file.
for the Vista and windows 7 OS has a adminstrative writes it wont allow to create and write a new file where near to application exe file.
is there any method has to set these file for administrative rights on Windows 7 and vista OS?
i am using Labview 8.6 version
Regards,
Balaji DP

You would need to log into the computer with an account that has administrative rights. Or, you could configure the application to run under the administrator account. Both of these are Windows operations.
Or, you could fix your code so it doesn't do that.

Problem with SD card and Sony Bloggie MHS-CM5

I have just bought a Sony Bloggie model MHS-CM5 and a SanDisk SDHC (number 4) 4gb card. For some reason when I turn it on, it was saying "error formatting sd card" or something very similar. I did some research and saw a problem somewhat similar, tried connecting to my computer, taking the battery out and back in, formatting card from camera options, and now it is saying there is no space on the memory card when it is brand new. I am fairly good with these things and I am stumped. Any help is greatly appreciated!

A SDHC type 4 4GB card should work fine with your bloggie, so try the card in another device and try another card in your bloggie to establish which is having the issue. If you find that the bloggie is having issues with several different cards it may need service. Give Sony support a call and they will be happy to help:
http://esupport.sony.com/US/perl/suppor ... mdl=MHSCM5

A20m Trouble with Ethernet Card and the Internet

I have a A20m Thinkpad that is not connecting to the internet. At first my problem was that I did not have an ethernet card as detailed on this forum post.
http://forums.lenovo.com/t5/Legacy-ThinkPads-A-I-V-300-600/A20m-Network-Controller-Driver/m-p/219725...
Thus I bought this ethernet card and installed it.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190223756432
From what I can tell I installed it correctly and then I preceded to install the drivers for this card. The ones located on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4K4PWT
It seemed to work well and the controller shows up in hardware devices.
That went well, but I still cannot connect to the internet. I thought it might be the card itself but after running the 3Com NIC Utilities that came with the drivers it said that there were no problems with the card.
Also of note I have noticed that there are no lights on the port where the ethernet cable is plugged in. I am not sure if there should be. Any help people could offer would be most appreciated. This Thinkpad is running windows XP.

Called them up today and basically I got them to pay for shipping this time. They told me they did not have any more new ones of my model and are not willing to ship me a suitable new replacement model after all this trouble and just gonna keep on shipping me refurbished until we find one that works (the heck? ...his quotes). So basically by the time I get my 2nd refurbished replacement (and assume it actually works this time) my computer would been down for over 2 months.
I am currently saving up for a 9800gt from evga since they are budget priced now (heard they actually have a good customer service and good quality cards) and based on my experience with MSI I can't recommend their products to anyone now sadly.
Hopefully MSI will send me out a tested a verified to word refurbished card this time.

Can HTML Help render a flash file with all bells and whistles?

I use Captivate to generate a .swf file, and inserted that .swf into my RH8 project and generated HTML Help.
When I look at the .CHM file, the flash plays, but not ideally.
a) It plays immediately when the topic is opened, and there's no way to re-start it except to close and re-open the topic.
b) There are no stop/start/pause buttons on the flash video. Could I have added those in Captivate?
Is the .CHM-player capable of flash videos with controls?
What did I miss?
Thx.

Hi Bruce
Ugh, from what you are describing, you are going at things all perfectly from the "Adobe approved and recommended" way of operating, but it's a method I don't personally use or recommend. Please tell me if I'm right with my assumption here.
I'm assuming (based on what you have stated) that you didn't launch Captivate separately, create the demo and publish it, then close Captivate and open RoboHelp HTML and insert what Captivate created. I'm guessing you used the wonderful (cough) integration that exists where you are in the middle of a topic and BAM! It suddenly hits you that a Captivate demo would be PERFECT here. So you cease your chain of thought while editing the topic and from inside RoboHelp you click File > New > Captivate demo and RoboHelp magickally opens Captivate to record the demo. You finish and close and the demo magickally appears inside RoboHelp.
Did I guess right?
Assuming I did, your case is precisely why I avoid working that way and why I don't recommend it. When you work this way you give up control of many Captivate capabilities and you enter into a realm of frustration.
I recommend using Captivate as the separate application it is. Open it separately. Record and create the Captivate parts separately. Then bring it into RoboHelp once it's reached prime time.
Please advise and we will proceed accordingly with getting you squared.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Trouble with itunes upgrade and Vista

I upgraded to 8.0 last night. The upgrade seemed to go as normal, but all I have is a blank itunes icon on my desktop which doesn't work. I reinstalled and still the same thing. Any suggestions?

This happens to me every single time I upgrade iTunes since as far back as version 6.x I think and its happened on both Vista and XP PC's.
Every single time I upgrade it does something with the desktop and quick launch icons to where they get "blanked" out and are no longer valid. This forces me to re-copy the "Start Menu\Programs\iTunes" shortcuts (that are created by default with the installer) back to the desktop and quick launch every single time I upgrade.
Does anyone know why this happens? The iTunes installation is the only program Ive ever seen this issue with and its really gotten pretty annoying.
Thanks a bunch!!

Using the Z68A-GD65 board with graphics card and Lucid Virtual Driver

Edit: I found the online manual for Lucid, so the main question is answered (where to plug in the monitor). However, I'd appreciate tips or suggestions on how to use this new technology.
I play a few games, burn/rip blu-rays, but mostly use Photoshop. The latest Photoshop and Win7 both use the processing power of a discrete graphics card. However, I'm going to install an i7 2600k which also has the graphics built into it. I understand the Lucid software allows video processing with the i7 and gaming with the discrete card. It sounds as though "i-mode" is the way to go, but are there any drawbacks?
Also, while I have your attention, here's my planned build, and I'd appreciate any recommendations/suggestions. Thanks for the help.
Win7 Pro
Z68A-GD65
Intel i7 2600k
16 gigs of Corsair Vengeance Low Profile (1600)
EVGA GTX 560Ti
Crucial SSD 128gig SATA III (for the boot drive)
Plus, all the leftover gear from the old build (BD drive, 3 hard drives, OZC 700w psu)

Thanks for your feedback .

Flash 8 with dx10 card and vista

Similar Messages

Maybe you are looking for