Flash 9 and Firefox on 10.4.7; firefox doesn't detect the plugin.

Yea, Hi. Can anyone help me with finding out why Firefox will not display flash; firefox keeps syaing that the plugin needs to be downloaded, but I already updated to FLASH 9 a few weeks ago. And Safari plays FLASH fine.
Anyway, when i was on a page with flash Using Firefox, It allowed, me to download it (Flash), and even though I already have it, I though Id download it again, since Firefox wasnt detecting it. Anwway, Firefox wont even download the Flash, it tells me someting about "unlicensed" when I try to download the plugin.
no biggie , ill just use Safari in the meantime, but Im trying to find out whats wrong here.
Dave

I have Flash 9 and FireFox 1.5.0.4 recognizes it and works on the sites I tested (Adobe and my own). The error message about unlicensed stuff is something I have never seen. Try to reinstall FireFox.

Similar Messages

Screen Saver when calling and need to use the Keypad, the screen saver doesn't detect the phone has left the ear and blanks out the screen. Even ending a call is difficult as the screen blanks out within seconds

I have to use the Keypad a lot when making calls. Make the call, the Robot then asks to enter a number for a service, pull the phone down from the ear, the screen may light up for a second, but then the screen saver cuts in, blanking the screen out. Sometimes you hit the Home Key to awaken the sccreen, enter your number and then back to the ear to hear the next set of instructions. Back and forth just trying to enter the options is a pain. Sometimes even trying to end the call, the screen blanks out and you fight to try and end a call.
If I use the Speaker function the keypad works; the speakler phone is not alway appropriate.
It appears that the phone gyro, doesn't detect the phone has moved from the ear to the viewing angle. This wasn't an issue until recently and I can't remeber if it's the iPhone 5 or one of the updates. It definitly wasn't there earlier on, as I threw away an Windows 6.5 phone for the same problem.
I'm not sure if it's a hardware or software (design) issue.

It is not the gyro. This has everything to do with the iPhone's prioximity sensor.
Are you using a case that may be blocking or partially blocking the proximity sensor? If you are using the case, remove the case prior to the next call to see if the same occurs without the case.

After 4.3.4 update the ipPad is in Recovery mode and iTunes doesn't detect the device

Hello,
brand new Win7 installation, restored iTunes folder and installed latest 10.4. iTunes64 bit.
Hooked up both my iPad and iPhone4
Detected new firmware 4.3.4
and bang, both devices are now stuck into recovery mode.
No matter I set the iPad/iPhone into Recovery or DFU mode, iTunes will not detect any device for recovery.
Uninstall/Install iTunes => no change
The driver will display that the units is detected and in DFU or Recovery mode, but iTunes doesn't detect the device.
Tried TinyUmbrella etc but no fix
Any other hint?
Best Regards
Uwe

Place the device in DFU mode (google it) then restore.

Ethernet port doesn't detect the cable is connected and doesn't function

It's since this morning that I can't make my en0 ethernet port work. Please note: changed dozens of cables, hubs, etc. The port simply doesn't detect the cable is plugged in and the actual network interface configuration crashes with the following log upon system boot-up:
Process: eapolclient [403]
Path: /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
Identifier: eapolclient
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: bash [368]
Date/Time: 2009-06-23 19:42:52.593 +0200
OS Version: Mac OS X 10.5.7 (9J61)
Report Version: 6
Anonymous UUID: 750052DD-67C5-4AEB-8843-9AB2F6B54967
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x96ff159b CFDictionaryGetCount + 43
1 com.apple.CoreFoundation 0x96ff435d CFDictionaryCreateCopy + 29
2 eapolclient 0x000056ba Supplicantupdateconfiguration + 49
3 eapolclient 0x00003316 main + 1303
4 eapolclient 0x00001d06 start + 54
Thread 1:
0 libSystem.B.dylib 0x90be86fa select$DARWIN_EXTSN + 10
1 libSystem.B.dylib 0x90bca155 pthreadstart + 321
2 libSystem.B.dylib 0x90bca012 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0xa087d4ec ebx: 0x96ff157e ecx: 0x00000001 edx: 0x00000010
edi: 0x001021c0 esi: 0x00000000 ebp: 0xbffff6a8 esp: 0xbffff690
ss: 0x0000001f efl: 0x00010283 eip: 0x96ff159b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Binary Images:
0x1000 - 0x8ff3 eapolclient ??? (???) <601ef87898001b311ead6372f01bdc5f> /System/Library/SystemConfiguration/EAPOLController.bundle/Resources/eapolclien t
0x21000 - 0x37fe4 com.apple.EAP8021X 9.0.5 (???) <a7b029e76077ad0f1decd8912359f590> /System/Library/PrivateFrameworks/EAP8021X.framework/Versions/A/EAP8021X
0x42000 - 0x6cff8 com.apple.framework.Apple80211 5.2.7 (527.2) <5982190f9caa25fca18b8753671d0d64> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x90b98000 - 0x90cffff3 libSystem.B.dylib ??? (???) <b47c8e6e45aef620730710a732bf1930> /usr/lib/libSystem.B.dylib
0x92188000 - 0x921e5ffb libstdc++.6.dylib ??? (???) <f75e5133d72769de5ce6c06153fc65f6> /usr/lib/libstdc++.6.dylib
0x92ee9000 - 0x92f14fe7 libauto.dylib ??? (???) <2e44c523b851e8e25f05d13a48070a58> /usr/lib/libauto.dylib
0x9433f000 - 0x9441ffff libobjc.A.dylib ??? (???) <400e943f9e8a678eea22a1d1205490ee> /usr/lib/libobjc.A.dylib
0x945fd000 - 0x94689ff7 com.apple.framework.IOKit 1.5.2 (???) <97b9f9d584f48891377f0481b9104434> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x947c8000 - 0x947d6ffd libz.1.dylib ??? (???) <a98b3b221a72b54faf73ded3dd7000e5> /usr/lib/libz.1.dylib
0x95697000 - 0x95868ffb com.apple.security 5.0.5 (36371) <c13e0bb1acfdcf94be4d3ee118ef190e> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x95938000 - 0x9596ffff com.apple.SystemConfiguration 1.9.2 (1.9.2) <eab546255ac099b9616df999c9359d0e> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x95a2f000 - 0x95ae1ffb libcrypto.0.9.7.dylib ??? (???) <9d714c92872a93dd127ea8556b2c8945> /usr/lib/libcrypto.0.9.7.dylib
0x96faf000 - 0x970e2fef com.apple.CoreFoundation 6.5.6 (476.18) <2d52bab73660117571bd6486dc318f8e> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x970e3000 - 0x970e7fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x9722b000 - 0x97232fe9 libgcc_s.1.dylib ??? (???) <e280ddf3f5fb3049e674edcb109f389a> /usr/lib/libgcc_s.1.dylib
0x97315000 - 0x9744eff7 libicucore.A.dylib ??? (???) <cac059ebdac7d9a63ee0f7a648c9f6cf> /usr/lib/libicucore.A.dylib
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib

I had a similar issue with a MacBook Pro. When connecting the network cable, the network preferences would show 'not connected'. I thought it was hardware, but when I transferred the user to another Mac, I found that that ethernet device all the sudden stopped working as well.
I was able to get the ethernet back with:
System Preferences
->Network
->Assist Me...
->Diagnostics...
At some point the ethernet device went green and all was well.
Maybe this will help.

Hello I have just bought light room five, done the download and it won't open because it doesn't recognise the user, help please

Hello

Thank you for your reply, using a MacBook Pro which is up to date, on not that cloy as you can Work out, I bought from camera electronic's in Perth Western Australia, I thought I was getting at desk and I got a card with numbers on, I put the numbers and it gave me A serial number and it said download White Room which I did, I went into downloads and clicked on it, it said I'm unable to recognise user, I tried five times and the sam, Kevin

I try to import photos from my iPhoto library but iMovie doesn't detect the photos and some of the projects.

I try to import photos to iMovie from my iPhoto events but iMovie wont detect the new photos or some events, I updated, restarted, etc. It didn't work, any solllution?

Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HT3204 I was in the process of restoring my ipad and an issue with itunes came up and itunes closed. Now my computer doesn't recognize the ipad as anything so I can't complete the restore process.

I was in the process of restoring my ipad and an issue came up with itunes and it had to close. I reopened itunes but now my computer doesn't recognize the ipad as anything plugged in to my computer. I am unable to complete the restore process.

Hi kimbo934,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
I hope this information helps ....
Happy Holidays!
- Judy

I have uninstalled Flash, and tried many different suggestions, but Firefox still crashes every few minutes. WHY? Check crash reports for najibul.huq@

There are hundreds of Crash reports with my email address on it. I don't know what is causing it. There is no indication and help anywhere that has indicated it. Flash seemed to be problematic, so I tried uninstalling flash completely and using WITHOUT flash - still the same.
I have uninstalled FF and re-installed it with new file from getfirefox.com - still the exact same.
Is there anyone who can tell me what to do? Please review my crash reports under my email address, and advise what I can do. My last few crash IDs:
59c3489c-c8f3-48e3-ad8e-e5618e1a46ab
bp-23dcd12a-cde8-4bc1-b5b6-702cd2130427
bp-4a295014-5427-4049-92d6-dc4f52130427
bp-36b4a26c-5117-4dbd-8401-f161b2130427
All within 2-3 minutes of each other.
I'm going crazy with this. How can I get the Old firefox that worked. I think anything after v12-13 is complete load of crap that doesn't work!
I am using Windows XP, is that a reason? How can I get a Xp-friendly version of FF?

Thank you for the response.
I restarted in Safe Mode, but it crashed again in 2 minutes. Can you decipher the Crash report? Because I don't understand anything from it. No way to figure what is exactly causing it.... The Troubleshoot did not help at all, very basic, and irrelevant info. I have hundreds of crash reports, but here's the latest ones, PLease Help:
<pre><nowiki>69761267-6aa7-49fb-9db6-a7a5b133781f
bp-c620f11e-4595-4023-9227-f17792130504
bp-ab7a5e10-2895-4df5-9fca-57af12130504
d38c2ef2-35d3-4ee5-a097-44c8606a4266
bp-ce5719b0-c774-4956-b44a-1f9532130504
bp-eebed5e6-cd8f-4fd5-bcc1-15fa92130504
bp-ad8ac748-924e-41ae-96ca-1b9472130504
bp-4194f51d-7831-41ca-b75f-72f002130504
bp-b847fd26-fd79-43a2-861b-e8ba92130504
bp-3c28c6c3-1f73-4da0-80d2-fb9722130504
bp-76ccb618-11ef-49f5-95ce-3ddbf2130504
bp-04dc01b7-6b09-474b-8a7a-bdff12130504
bp-f176b0c1-f250-47bd-8fa6-2405a2130504
bp-84a49604-c352-4a08-8c2c-c2b282130504
bp-6305669f-0378-48d8-bfe3-97bd12130504
bp-dd35e2d5-bc07-473d-8748-cf8bc2130504
1a2444a2-bf78-4f49-a46a-35d401182e78
bp-4bb67980-85e3-4af7-86da-3d3eb2130504
bp-a6d26309-9a4b-4c90-9a28-ee4fc2130504
bp-0e12d51d-1672-44c1-b864-acac72130504
bp-d422a61e-b019-49eb-b35d-eb81f2130504
bp-3fd67d02-c5c8-4666-a09c-8b2472130504
bp-b8b1e949-7525-41b2-8660-091e62130504
bp-414b34ca-ed51-4fe1-bda0-848c52130504
bp-ace02358-9371-48a3-8102-12f192130504
bp-4ec7399c-409c-472d-9463-038782130504
bp-ae1b58f8-2097-4b29-bef0-f3fe32130504
bp-2fc759f3-975b-4281-9eab-a06f52130504
bp-9b8ae433-b480-4ac7-984e-2fd332130504
bp-cbc597aa-3d3c-472d-beb8-03f012130504
bp-5db34f37-4605-4815-b273-1861e2130504
bp-8a979c36-9202-4834-a251-576e72130504
bp-63fd2d13-e597-41f5-b6c0-9858e2130504
bp-91c2d98a-e2fe-4857-a84f-6413c2130504
bp-f99877c8-045f-455e-a2ac-49cc92130504
bp-7dadbc19-6034-4930-ba1d-a16502130504
bp-2ebfa0eb-b2cf-42fb-92ec-ddafe2130504
bp-67356cf5-427a-4991-8043-72a8e2130504
bp-f0c631b6-68a5-450b-8b61-816da2130504
</nowiki></pre>

Seems Java and Adobe Flash keep prompting me to install because it doesn't see the program

When I open a webpage that requires java the application isn't found and the explorer says it needs to install the plug in. I uninstall the plug in and let the explorer install. Still didn't work. When I go to a page that requires adobe in the page it the install of the plug in. Everytime...even in the same session if the page reloads.

It looks like you have a 64bit version of Firefox 4.0b9pre installed, which needs 64bit plugins. <br/>
Are you installing a 32bit or 64bit version of Flash?
Is Java even available in a 64bit version for Firefox?
http://www.java.com/en/download/faq/java_win64bit.xml

I have update adobe flash, and it still crashes, why can't y'all fix the problem?

everyday sometimes 3 or 4 times firefox crash....i have updated adobe flash.....

Mozilla doesn't make Flash, Adobe does, so it's up to them to fix their stuff.
I'm still using Shockwave Flash 10.1 r53.64 and don't have the crashing problems that to two newer 10.2 and 10.3 versions are having. But I am using WinXP, not Win7, so YMMV.

My flash and back camera is not working it just out of the blue stopped working I reset everything and it still does not work what should I do it's an iPhone 5c

MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c

Backup and then restore as new and see if it works or not.

HT1600 keeps flashing and shows a music icon with a plug is on the screen. What do I do?

Box keeps flashing after I have waited a hour. Music icon appeared with a plug. What does that mean?

This explains it you you.
http://support.apple.com/kb/HT4053
You have to connect the iPad to your computer with the supplied cord and be running iTunes on the computer. You need the latest version of iTunes which you seem to have - but read the article.

I was in editor and got a scratch full message, went to help, changed the plugins to C drive as stated, now editor won't open, just organizer

I was in editor and got a scratch something or other is full. so I went to help and it said add plugins locations, so per the instructions I went to preferences and changed my scratch/plugins to the C drive. Now editor will not launch, just organizer.

Do you have JSON backups that Firefox keeps in the bookmarkbackups folder?
If you use the Time Machine then you can try to restore the places.sqlite file.
*http://www.apple.com/support/timemachine/
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Ipod touch 4th gen stuck on connect to itunes and itunes doesn't detect the ipod. tried all options the wedsite gave me nothing is working

I have tried everything that apple.com has told me. I have watched countless videos. I'm at a complete loss. I just want my ipod to work without destroying my computer.
This "connect to itunes" screen is driving me nuts.
Please HELP!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I save a photo after I have zoomed in on it? I want to save the zoom-in as a new photo and can't work out why this doesn't work the same way saving a cropped image, or adjusted image does. Thank you.

How do I save an image after I have zoomed in on it? I can't work out why I can't save a zoom-in the same way
I can save a cropped image or an adjusted image. Thanks, Lily A.

Hi Matt, thanks for your reply. Have realised that Zoom in Iphoto is just a viewing tool and not an editing tool.
Was creating beautiful abstractions by zooming in and wanted to create a new image of the result. Have since discovered that cropping after zooming takes me a little way to where I want to go but it isn't the same effect. Will perhaps have to try to create it when actually shooting. Am doing a photoshop course in February and maybe will learn a bit more then, too. Am pretty much an amateur just finding my way.
Thanks again,
Best, Lily

Flash 9 and Firefox on 10.4.7; firefox doesn't detect the plugin.

Similar Messages

Maybe you are looking for