Flash Admin Console Unable To Access

This may sound like a newbie question so i apologize if it sounds a bit dumb... My problem is that I am unable to login into my Flash Administration Console. I have typed in the correct username and password however, it keeps coming back has failed.
To the best of my knowledge port 1111 is working although, i don't how if there is a method of checking port 1111 to see if it is open or blocked.
When i login i give my username and password...There is the default server 1. In regards to server address...Is the server address just your computer ip address or something else? A little a confused here. Any help would be most welcome.

Hi,
This is a basic thing but could you check if your Admin Server is running? If its a windows machine then under Services check for Flash Media Administrator Server and if it is linux check if fmsadmin process is running.
Thanks,
Apurva

Similar Messages

DPM remote admin console unable to open on Windows 7

Hi,
I have installed DPM 2012 remote administrator console on windows 7 computer with user having local administrator rights on windows 7 computer as well as DPM server but when I am trying to open console on windows 7 computer it gives below error:
Unable to connect “dpm server FQDN” (ID:948)
Verify that the DPM service is running on this computer.
Same console is able to open with DPMADMIN user but unable to open with other user having local administrator rights. DPMADMIN is having domain admin rights.
So what exactly rights are required to run DPM remote administrator console.

Does your other user has access right to DPM DB? Try assign that user to sysadmin right.
Lai (My blog:- http://www.ms4u.info)

Flash Admin Console shows no applications on my Flash Media Server?

Hi all,
My employer has a Flash Media Server that I wrote a little streaming video app for a couple years ago. Well, the videos have stopped working and I've been asked to troubleshoot. I fired up the fms_adminConsole.swf and connected to my server. Now, it's been a long time since I've messed with the server, but if I remember right, there was a big list of apps on the list on the left hand side of the "View Applications" view of the console. When I log in, there are no applications listed. If I hit the "New Instance" button under the empty list, I'm presented with a list of all the apps I think I should be seeing in the Applications list. If I select any of these, a new application instance appears in the applications list, and I'm prompted to give it a name, the default being "_definst_". If I hit enter to create this instance, it remains on the list and instance data appears on the right panel until the console refreshes, and then all that vanishes and I'm back to an empty applications list again.
Going to "Manage Servers", I do see a list of applications under the applications tab that I expect to see. The app that streams the video that's having problems is there on the list.
Is this typical behavior for the Flash Media Server Console? Shouldn't I have a list of apps in the "View Applications" section of the console? I've created about a dozen to date, and they're all listed under Manage Servers > Applications, but not under "View Applications". Can anyone point out if I'm doing something wrong here or missing something? Or can someone confirm that I SHOULD be seeing something under "View Applications" and that there is indeed something weird going on with the server.
Thanks for any assistance!

What you are seeing is correct behaviour. Until and unless applications are loaded or some clients are connected to them, they wont be shown under view applications tab by default. Try connecting to one of the applications you have and then you will see it automatically gets listed there.

Email address missing from account info in Office 365 exchange console, unable to access inbox

Hi
we have successfully migrated our on premise Exchange environment to Office 365. We came from a 3 domain environment and we are having some issues accessing accounts. I have tried to add the smtp:[email protected] address using ADSI Edit but after
DirecSync, I'm not able to locate this address on the account. is there a different way to add email address to Office 365 accounts?

I would recommend asking them in Office 365 forum: http://community.office365.com/en-us/f/default.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Admin page unable to access

I am running Win XP pro 64. I have a WRT54G Router hard wired to my computer thru a, Network Everywhere (Linksys) model NC100U-WM ,PCI card.I want to set up a wireless network in my house to share the dial-up Internet connection. I have tried the http://192.168.1.1. I only recieve "this page cannot be displayed" . Thanks in advance for any help.

pennylane wrote:
Routers are meant to be used for broadband connection but it will also work with dial-up by configuring your computer as a proxy server. Please tell us how you connected things and not kinda sure if NC100 has drivers for 64-bit OS already.
to expand on what pennylane said....
if your ethernet cable has one end in one of the ports labled 1-4 and the other end is in your network card you also need to have your network card configured to use dhcp.
if this is the case then you can confirm that 192.168.1.1 is the correct address for managing the router by typing ipconfig from the command line
start > run > cmd
the above should get you to a command window
type ipconfig
this should display your ip adderss, the subnet and an address for a gateway.
the gateway is the address for your router when directly connected as described above.
you should also be able to ping the gateway address.
type ping 192.168.1.1
if you are able to do all this but not able to get to the address the possibly you have a 3rd party software firewall installed.
the below thread may be useful to you in that case.
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=581

LDAP authentication issue for Admin Console 7.0U5

Here is what I'm trying to do:
In Unix LDAP Server, there are 2 identities already been created
dn: cn=group1,     ou=group,ou=na,dc=XYZ,dc=com (gidNumber: 937)
dn: uid=bai,     ou=People,ou=na,dc=XYZ,dc=com (gidNumber: 937)
dn: cn=group1,ou=group,ou=na,dc=XYZ,dc=com+
memberUid: user1+
memberUid: bai+
memberUid: user2+
gidNumber: 937+
objectClass: top+
objectClass: posixgroup+
objectClass: groupofuniquenames+
dn: uid=bai,ou=People,ou=na,dc=XYZ,dc=com*
loginShell: /bin/ksh*
homeDirectory: /export/home/bai*
gidNumber: 937*
cn: Lastname, Firstname*
sn:*
uid: bai*
uidNumber: 10091*
objectClass: top*
objectClass: inetOrgPerson*
objectClass: posixAccount*
objectClass: shadowaccount*
objectClass: organizationalPerson*
objectClass: person*
++shadowFlag: 0+
User "bai" is a member of Group "group1" and will also be used as bind-dn (connection tested successfully)
There are also other members (user1, user2) in the Group "group1".
Goal: all individual users in "group1" will have access to Admin Console. (allow_group=group1)
settings as follows
--ldap-url=ldap://ldapsever.XYZ.com:389/dc=XYZ,dc=com*+
--bind-dn=uid=bai,ou=People,ou=na,dc=XYZ,dc=com*+
--bind-password=xxxx*+
--group-search-filter=gidNumber*+
--group-search-attr=cn*+
--allow-group=group1*+
--search-filter=uid*+
It appears that I got authenticated by LDAP, please see messages from the ldap log
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=0 msgId=1 - BIND dn="uid=bai,ou=People,ou=na,dc=XYZ,dc=com"
method=128 version=3*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0
dn="uid=bai,ou=people,ou=na,dc=XYZ,dc=com"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=1 msgId=2 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(uid=bai)" attrs="c"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=2 msgId=3 - BIND dn="uid=bai,ou=People,ou=na,dc=XYZ,dc=com"
method=128 version=3*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=2 msgId=3 - RESULT err=0 tag=97 nentries=0 etime=0
dn="uid=bai,ou=people,ou=na,dc=XYZ,dc=com"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=3 msgId=4 - BIND dn="uid=bai,ou=People,ou=na,dc=XYZ,dc=com"
method=128 version=3*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=3 msgId=4 - RESULT err=0 tag=97 nentries=0 etime=0
dn="uid=bai,ou=people,ou=na,dc=XYZ,dc=com"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=4 msgId=5 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(uid=bai)" attrs="c"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=4 msgId=5 - RESULT err=0 tag=101 nentries=1 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=5 msgId=6 - SRCH base="dc=XYZ,dc=com" scope=2 filter="(|(&(objectClass=groupofuniquenames)(|(gidNumber=uid=bai,ou=People,ou=na,dc=XYZ,dc=com)))(&(objectClass=group)(|(member=uid=bai,ou=People,ou=na,dc=XYZ,dc=com)))(&(objectClass=groupofnames)(|(member=uid=bai,ou=People,ou=na,dc=XYZ,dc=com))))"
attrs="cn"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=5 msgId=6 - RESULT err=0 tag=101 nentries=0 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=6 msgId=7 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(&(objectClass=groupOfURLs)(memberURL=*))" attrs="cn
memberURL"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=6 msgId=7 - RESULT err=0 tag=101 nentries=0 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=7 msgId=8 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(uid=bai)" attrs="c"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=7 msgId=8 - RESULT err=0 tag=101 nentries=1 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=8 msgId=9 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(|(&(objectClass=groupofuniquenames)(|(gidNumber=uid=bai,ou=People,ou=na,dc=XYZ,dc=com)))(&(objectClass=group)(|(member=uid=bai,ou=People,ou=na,dc=XYZ,dc=com)))(&(objectClass=groupofnames)(|(member=uid=bai,ou=People,ou=na,dc=XYZ,dc=com))))"
attrs="cn"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=8 msgId=9 - RESULT err=0 tag=101 nentries=0 etime=0*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=9 msgId=10 - SRCH base="dc=XYZ,dc=com" scope=2
filter="(&(objectClass=groupOfURLs)(memberURL=*))" attrs="cn
memberURL"*+
+*[03/Nov/2009:10:00:54
-0500] conn=10858 op=9 msgId=10 - RESULT err=0 tag=101 nentries=0 etime=0
However, I'm still getting errors from Admin Console
WarningAccess Denied+
Access to the Administrative UI has been denied.+
Your user permissions do not allow you to view or edit data in this area. If you need access, contact the system administrator.+
Not sure where the problem is with? LDAP or ACL?
Any help will be highly appreciated, Thanks a lot!
- Langbaam
Edited by: langbaam on Nov 3, 2009 7:58 AM
Edited by: langbaam on Nov 3, 2009 8:29 AM
Edited by: langbaam on Nov 3, 2009 8:33 AM

Can you check if your admin-server's server.xml (admin-server/config/server.xml) has the following settings?
<default-auth-db-name>ldap</default-auth-db-name>
<auth-db>
    <name>ldap</name>
    <url>ldap://<hostname>:<port>/<base-dn></url>
    <property>
      <name>bindpw</name>
      <value><passwd></value>
      <encoded>true</encoded>
    </property>
    <property>
      <name>binddn</name>
      <value><binddn-value></value>
    </property>
</auth-db>Can you also verify if the file under admin-server/config/default-sun-web.xml has the following settings?
# cat default-sun-web.xml
<?xml version="1.0" encoding="UTF-8"?>

<sun-web-app>
<security-role-mapping>
    <role-name>admin</role-name>
    <group-name><your_group></group-name>
</security-role-mapping>
</sun-web-app>- Amit

OIM 9.1.0 installation- Unable to access Admin console

Hello OIM Gurus,
I'm new to OIM. I am trying to setup OIM 9.1.0 one of windows VM. After the installation i'm unable to access to oim admin console using link http://localhost:8080/xlWebApp
If I try to access the above URL i get "The requested resource (/xlWebApp) is not available" message.
Here are the details for the environment
Environment: Windows Server 2003 R2
OIM Version: 9.1.0
App Server: jboss-4.0.3SP1
Database (OIM repository): MS-SQL server 2000 sp4
Please throw some light on this.
Thanks.

Thanks Kevin. I have looked at the setup-jboss.profile.log inder <OIM_HOME>\xellerate\logs . I could find the below error
move] Moving 1 files to C:\oracle_idm\xellerate\webapp\precompiled
[move] Attempting to rename: C:\oracle_idm\xellerate\webapp\precompiled\jsp-temp\tjspIndex.jsp to C:\oracle_idm\xellerate\webapp\precompiled\tjspIndex.jsp
[jasper2] log4j:WARN No appenders could be found for logger (org.apache.jasper.compiler.JspRuntimeContext).
[jasper2] log4j:WARN Please initialize the log4j system properly.
[jasper2] Error in class org.apache.jasper.JspC
BUILD FAILED
file:C:/oracle_idm/xellerate/setup/jboss-setup.xml:245: org.apache.jasper.JasperException: Unable to initialize TldLocationsCache: null
     at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:155)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
     at org.apache.tools.ant.Task.perform(Task.java:341)
     at org.apache.tools.ant.Target.execute(Target.java:309)
     at org.apache.tools.ant.Target.performTasks(Target.java:336)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:39
Do you have any idea how do i fix this issue? Any help would be really appreciated.

Unable to access application set in admin console after upgrade to 7.0 M

Hi Experts
I am unable to access the Application Set through BPC Administration after upgrading our development server to version 7.0 SP3. I followed the instructions as per the Upgrade guide, and there was no issues during the installation. But when trying to access the application set i receive the following error message on step 9 ( 9/10) of during the connection.
Error message: Subquery returned more than 1 value. This is not
permitted when the subquery follows =, !=, <, <= , >, >= or when the
subquery is used as an expression.
I have done all of the steps outlined as per SAP Note 1242962, but i still receive the error message. I tried to do a SQL Profiler trace, but i have been unable to find the query which returns more than one record.
Any help is appreciated
Kind Regards
Daniel

Interesting that you ask about upgrade vs uninstall/reinstall.
We were running BPC 5.1
We have also re-installed the Admin client to be the new version.
We have been working with an outside consulting firm to manage our system upgrade/install.
Our dev and qa environments were uninstalled then reinstalled.
When we went to production, our system was intially upgraded. I do not know why this route was chosen when that was not what was completed on dev/qa. On our production 'upgrade', we are still working through issues. We then uninstalled iis, sqlserver reporting services, both .net 1.1 and 2.0, and the BPC application. Then reinstall everything and we were getting the same errors.
Our error was at Progress 10/10 Create Database Schema and check Application server collation.
Error Message: Object Reference not set to an instance of an object.
We are able to access the appShell and test copies of the appShell, we were not able to access any custom appSets which were created prior to the upgrade, nor are we able to access any appSets that were created as a copy of the custom appSet after the upgrade.
When logged with SAP, we were directed toward note Note 1331040 - Cannot log into 7M Admin console after restore from version5 noting that we needed to do the following changes:
Note that you will need to change the following:
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.112')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.112')
to
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.113')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.113')
The reason is because '7.0.113' means 7 MS SP04 while '7.0.112' means SP03.
There are 8 steps in this note, for us, only the first 2 were needed. I have asked SAP to create new note/update existing accordingly.
With the table entry, we were able to successfully access our app set.
Hope our experiences can help you out.
Thanks,
Becky Zick

Unable to access admin console - WRVS4400N...

Hi first time poster and Cisco forum user - although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
...and have never been so frustrated - apart from the last time I tried to use a Linksys product (I cannot remember the exact model - someone gave it to me as part payment for a job - I wound up throwing it away and buying something else). I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason. It was purchased from an online dealer in the UK. I do suspect - however - that this might be resolved with a little help from an expert.
Has anyone got a clue?
Many thanks,
Rob

Hi Dave,
Thanks for taking the time to reply... Yes is the short answer - but the problem wasn't a dodgy firmware upgrade or anything of the sort...
I simply could not get started with this device - because it had been sold and returned to said supplier who simply assumed the original customer was telling the truth when they said they hadn't used it and had simply decided to return it unused... nor had the supplier checked to make sure that the user interface had been reset to defaults.... so it had simply been shipped to me with whatever username and password said 1st hand customer had put into it...
Fortunately I know a proper IT professional or two... One of whom has managed to find and download the proper installation manual and re-set the device properly for me...
I shall find out how tomorrow and post the info right here... apparently it's not as simple as holding the reset button in for 'x' amount of time... and am quite happy to share this and any other info I may glean from the experience..
BTW - it is a V2.0 made in April 2011 - apparently these are quite a bit of kit and are no longer made...
Many thanks to anyone who has even scratched their head over this ...
Will shout up soon...
Rob

Unable to access Admin Console

Hi,
I have installed Oracle Database11g and WebLogic 10.3.0 Application Server successfully in LINUX-64 bit environment. At the end of OIM server 9.1.0.1 it displays "The Oracle Identity Manager Application Server setup has some problem. Refer OIM_HOME/Xellerate/logs/setup_weblogic.log for information about the problem" in the console. So, when i able to access Admin console. It throws Error:404.
Also setup_weblogic.log has the following error details
BUILD FAILED
/oracle/oimserver/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Ant could not find the task or a class this task relies upon.
Also nexaweb.war and xlWebApp.war is missing in Weblogic console page-> Deployment tab.
I have reinstalled the weblogic and OIM again but still getting the same problem..
Please help me to resolve this issue.
Thanks in advance.
Regards
Katheresh
Edited by: Katheresh on May 10, 2010 9:47 PM

Hey Kathy
did you setup ORACLE_HOME to weblogic_home, JAVA_HOME and added java to PATH. Also do you have any other ANT installed on your server.
Have you checked the OIM certification matrix for the version of various components like OIM, Weblogic and Database.
If you are sure that you did all this correctly, then perform the following:
The nexaweb classloader error is seen at times prior to performing the post installation steps. Then make a backup of the weblogic domain directory and the <OIM_HOME> directory.
1. Please continue and perform the postinstallation steps.
2. Restart the server
3. In the weblogic console, shcek to see that the xellerate and nexaweb applications have an "ok" status.
4. If not:
a. Please upload the oim server log.
b. Using the WebLogic console undeploy all oim applications including, xellerate, nexaweb and, if there, XIMDD, and SPML.
c. Delete the directory <OIM_HOME>/xellerate/webapp/precompiled
d. Delete the xellerate.ear and Nexaweb.ear from the directory <OIM_HOME>/xellerate/OIMApplications (Note: do this on all nodes of the cluster)
e. Delete the ant_backup.jar, optional_backup.jar and xercesImpl_backup.jar files from the OIM_HOME/xellerate/ant/lib directory.
f. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/AdminServer/tmp/_WL_user directory.
g. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/tmp/_WL_user directory.
Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/stage directory.
h. In the OIM_HOME/xellerate/setup/weblogic-setup.xml file:
i. Search for the following element:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}" />
ii. Add a timeout value of 5400 as shown:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}"
timeout="5400" />
i. Restart the WebLogic server and managed servers.
j.Open a terminal session and export the the JAVA_HOME and PATH environment variables.
k. In the same terminal session, change to the directory <OIM_HOME>/xellerate/setup
l. Run "patch_weblogic.sh"
This should reinstall that xellerate applications on WebLogic.
Hope this helps.

Unable to access Informatica Power Centre Admin Console home page.

My browser not opening the admin console home page having following URL
"http://localhost:6001/adminconsole".
Browser is giving the following error message..
"The page cannot be displayed"
Can anybody help me out.

Informatica_Installation_Server_Debug.log has the following messages...........
Informatica Services Startup
===========================
Current time: 2010-Oct-06 15:16:18
Command Executed
"C:\Informatica\PowerCenter8.6.1\server\tomcat\bin\infaservice.bat" install "InformaticaServices8.6.1" "InformaticaServices8.6.1" "shabbir" "********"
Output of execution
Output: Installing the service '"InformaticaServices8.6.1"' on node 'node01_Shabbir-Abubakar'...
Using CURRENT_DIR: C:\Informatica\PowerCenter8.6.1\server\tomcat\bin
Using INFA_HOME: C:\Informatica\PowerCenter8.6.1
The service '"InformaticaServices8.6.1"' has been installed.
Error: The service name is invalid.
More help is available by typing NET HELPMSG 2185.
ExitCode: 2

Third party access to Business Catalyst admin console: dashboard freezing

Hi,
My client can't access his admin console in Business Catalyst to edit the website we've built for him. He's using both a Mac G5 2.1gh power pc OS 10.4.11 and a Mac Laptop 2.2gh intel core duo 10.6.8. He follows this link http://www.slowhome.co.uk/AdminConsoleXT/#dashboard but the screen just freezes. I've resent passwords, fiddled with admin persmissons but nothing has freed up access yet. Any suggestions, clues or answers please? We're using Adobe Muse to build and Business Catalyst to manage. His browser meets the system requirements.
Cristina

What browser is he using? The user account for the other admin at the site seems to be properly set up with all permissions assigned. I'm unable to reproduce the problem either. If the problem persists, can you ask the user to try another browser or clear cookies/temp data/cache for the current browser and re-try. If that doesn't help, please try logging into the admin using a different network connection.
You could also try creating another admin account for the user and test it out. This would also help isolating the issue to being account specific. If that doesn't work either, please reach out directly to BC live chat support through http://helpx.adobe.com/contact.html?product=business-catalyst.
Thanks,
Vinayak

Unable to open admin console in either Ap server 9 PE or EE5SDK

I am new to Java, and have recently installed ap server 9PE, as well as EE5SDK on my Windows XP platform.
The problem is, I am unable to USE either program, because the admin console(s) show invalid username/password.
I know that I used my email address as the username for both of these, and I even know what I thought was the password, but I am totally locked out.
Is there anyway to reset all the passwords including the master, as well as the domain passwords to allow all the info to be reset? I would hate, at this point, try to remove both these apps from my drive, and attempt to reinstall, for I have no quarantees that the passwords will carry on with the reinstall.
I want to be able to access both 9PE (ap Server) as well as the Enterprise5SDK, but I am totally locked out, have no idea where the files are with the password info, and am basically, at this point dead in the water. I also downloaded/installed netbeans 6.1, that will open, but I need the two apps which I am locked out of to do any meaningful programming... HELP!!!!!!!
Greg M

I am new to Java, and have recently installed ap server 9PE, as well as EE5SDK on my Windows XP platform.I don't know about the Sun App Srever, but it is now called GlassFish .... are you talking about it.
I also downloaded/installed netbeans 6.1, that will open.Have you downloaded the complete package of NetBeans 6.1, because if you have done so, then GlassFish would have been automatically got installed (check Tools>Servers in NetBeans). And for your information its default username is 'admin' and password is 'adminadmin' ;-)
Thanks!

Unable to Open the Admin Console

HI there,
I installed Weblogic server 10.3.3 on my windows operating system. I confugred it through configuration wizard. After that I was able to open the admin console . I logged into admin console and logged out of it. Now , I am unable to open the admin console again . When ever I try to open it from the quick launch it gives a error meassage "firefox can't establish a connection to ....:pc-7001." (somethng like that).
I tried to open it from start menu and then clich START ADMIN SERVER FOR WEBLOGIC DOMAIN .. when ever I click this it directs to a CMD prompt where in it gives a path like c;>/ oracle/middlware/userprojects/domains/basedomain/ follwoed by a curosr waiting for instruction..
Please tell me wat is goin wrong..? U r help is greatly appreciated

Hi,
I have tried doing the steps you have mentioned above.It is redirecting to http 503 page.Upon checking the logs getting the following error.
Could you please help with it.
##<Jun 14, 2011 12:14:32 PM IST> <Info> <WorkManager> <01hw198615> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1308033872956> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
####<Jun 14, 2011 12:14:34 PM IST> <Error> <HTTP> <01hw198615> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1308033874347> <BEA-101216> <Servlet: "AppManagerServlet" failed to preload on startup in Web application: "console".
java.lang.NoSuchMethodError: com.bea.utils.misc.ProcessUtil.getPropValues(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)[Ljava/lang/String;
     at com.bea.p13n.license.LicenseHelper.getLicensePropertyValues(LicenseHelper.java:259)
     at com.bea.netuix.servlets.services.LightNetUIxServices.getRestrictedPortalLimit(LightNetUIxServices.java:140)
     at com.bea.netuix.servlets.manager.UIServlet.reinitInternal(UIServlet.java:177)
     at com.bea.netuix.servlets.manager.UIServlet.initInternal(UIServlet.java:164)
     at com.bea.netuix.servlets.manager.UIServlet.access$100(UIServlet.java:60)
     at com.bea.netuix.servlets.manager.UIServlet$ServletLifecycleListenerImpl.init(UIServlet.java:555)
     at com.bea.netuix.util.ServletLifecycleListener.initOrReinitInternal(ServletLifecycleListener.java:131)
     at com.bea.netuix.util.ServletLifecycleService.addServletLifecycleListener(ServletLifecycleService.java:252)
     at com.bea.netuix.util.ServletLifecycleService.addServletLifecycleListener(ServletLifecycleService.java:182)
     at com.bea.netuix.servlets.manager.UIServlet.init(UIServlet.java:131)
     at com.bea.netuix.servlets.manager.SingleFileServlet.init(SingleFileServlet.java:75)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.init(MBeanUtilsInitSingleFileServlet.java:36)
     at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:100)
     at weblogic.servlet.AsyncInitServlet.init(AsyncInitServlet.java:78)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.BackgroundDeploymentService$2.next(BackgroundDeploymentService.java:373)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BackgroundDeploymentService$BackgroundDeployAction.run(BackgroundDeploymentService.java:277)
     at weblogic.application.internal.BackgroundDeploymentService$OnDemandBackgroundDeployAction.run(BackgroundDeploymentService.java:336)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>

Problem accessing Team Admin Console

I'm unable to access the Team Admin Console at https://adminconsole.adobe.com. I can get as far as to the login stage, but after that I get the following error message:
"We're sorry, but something seems to be wrong on our end. Please try again later. If the problem persists, contact customer support and they'll be glad to help you out."
The "contact customer support" only leads to a page offering phone support to an american number, scheduling of a one to one meeting and a link to the community. No e-mail support or support webform.
Anyone had success in using the Team Admin Console?

I've also been getting this error 100% of the time since subscribing our team to Creative Cloud earlier this week - so far the money's been wasted and have found no way to access adminconsole.adobe.com.
I can access creative.adobe.com just fine - but this is useless for me, as it is entirely personalised and contains no options or data that are related to the administration of my team account. I've called the support line, but was sadly unable to find anyone offering support - only sales advice!
Anybody able to shed any light on this whatsoever? All the Adobe Support I've been in touch with is entirely unable to assist with website problems - they just want to sell me the software that I already bought ; )

Flash Admin Console Unable To Access

Similar Messages

Maybe you are looking for